AeroBed Domed Valve User Manual

7917 Rev. 01/07 111DV

Premier Raised Instruction Manual

Thank you for joining the Aero® family by purchasing one of our upscale products. You can expect top-notch quality, innovation and imagination from every Aero product.

ou are about to enjoy the comfort of the AeroBed® Raised, the ﬁnest alternative sleeping system available anywhere. It is your responsibility to read and always follow the safety, care and maintenance instructions for your new Aero product. Always instruct and supervise others on the proper use, maintenance and safety of your bed.

IMPORTANT: Preperation of your AeroBed Raised requires no tools. Use of tools may damage your bed.

- WARNING: Adult supervision required for inﬂation, deﬂation and maintenance. Follow all safety instructions to avoid serious injury.

- WARNING: This is an electrical product-not a toy. To avoid risk of ﬁre, burns, injury and shock, it should not be played with or placed where small

children can reach it. Do not use in or around water.

- WARNING: Product is for indoor use only.

- WARNING: For household/residential use only.

-This is not a water toy. Use as a mattress only.

-This mattress is not intended for infants or persons with limited mobility. They may roll off of the mattress and become entrapped between the mattress and a wall.

-Remove all sharp objects from area where bed will be set up and used.

-Do no step or jump on bed or use as a trampoline.

-Place bed in a safe area before use, making sure that there are no sharp edges, steps, or breakable items nearby. Use on ﬂat surfaces only. Bed may tip over on

uneven surfaces.

-Do not use this bed on abrasive surfaces or near pointed/sharp items or surfaces. Protruding objects may puncture the bed.

-Do not sleep on the edges of the bed. Edges are less supportive and may crush under weight.

-This bed is made of plastic and therefore may melt or burn if it comes in contact with any ﬂame or heat source. Do not place it near or against heaters, open ﬂame

or other hot objects.

-Unplug product when not in use.

-Do not attempt to dissemble, repair, or service the pump. No serviceable parts are contained inside.

Contact Aero Products International, Inc. at 1834 Walden Ofﬁce Square, Suite 300, Schaumburg, IL 60173, for repair or servicing information.

Remove your AeroBed Raised from its lightweight duffel bag. Keep bag for storage.

1. Place your rolled-up bed on the ﬂoor free of obstructions or sharp objects.

2. Make certain the Quick Air Release Valve located at the foot of the bed is closed. If the Quick Air Release Valve is open, close it by using 2 thumbs to push cover and snap into valve. Be careful to avoid pushing valve cover to the right or left as it snaps into the valve opening.

IMPORTANT SAFETY INFORMATION AND WARNINGS

INFLATION

This is the closed position. Open Air Release Valve Close Valve Using 2 Thumbs

3. Remove AC plug, cord, and One Touch® Comfort Control Wand from plastic bag and shrink wrap.

4. Plug into any standard polarized 110 Volt AC electrical outlet. North American Electrical rating: 120 VAC 60HZ 1.0A (Note: 230VAC product sold outside of North America.) This product has a polarized attachment plug (one blade is wider than the other) as a safety feature. This plug will ﬁt into a polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat this safety feature.

5. Push and hold inﬂation/ﬁrmer button on the One Touch® Comfort Control Wand for approximately 3 minutes to inﬂate your AeroBed Raised to the full (ﬁrmest) capacity. Bed will not over-inﬂate.

6. Lie on the bed and use Comfort Control Wand to adjust the ﬁrmness to your desired level. For ﬁrmer bed, press inﬂate/ﬁrmer button. For softer bed, press deﬂate/softer button.

CAUTION: Do not sleep on edges of the bed. Edges are less supportive and may crush under weight.

DEFLATION AND STORAGE

1. Make sure the bed is unplugged from the electrical outlet prior to deﬂation.

2. To deﬂate your AeroBed Raised, open the Quick Air Release Valve at the foot of the bed. Deﬂation takes approximately 1 minute.

3. Roll or fold the AC cord with wand control and secure it. Fold sides of bed into the center along its length. Tightly roll your AeroBed Raised around the pump towards the air release end. When the bed is completely rolled, push the Air Release Valve closed until it locks.

4.Store your AeroBed Raised in a clean, dry place at room temperature (above 50°F/10ºC). Storing your

eroBed under 50ºF (10ºC) and over 100ºF (38ºC) may affect its performance and will not be covered under warranty.

NOTE: Bed must be at room temperature prior to inﬂating or it may cause air leaks.

CARE AND MAINTENANCE

1. Inspect your AeroBed Raised prior to each use.

2. Keep your AeroBed Raised away from any sharp objects. Large cuts or snags may not be repairable and will not be covered by your warranty.

3. When not in use, store your AeroBed Raised in a clean, dry place out of extreme temperatures. Product must be at room temperature prior to inﬂating.

4. In case of incidental damage to your bed, a repair patch has been included. Please follow repair instructions carefully.

We recommend that you do not let the plush surface of your AeroBed Raised get wet. Repeated exposure to water or other liquids may cause damage to the plush surface that will not be covered by your warranty. Should liquid come in contact with the plush surface, blot liquid dry and use a damp cloth to remove any stain. Let surface air dry completely.You may clean the PVC on the sides and bottom of your bed with a mild dishwashing detergent or household cleaner. Do not use stong chemicals or other compounds. Allow your bed to air dry completely after cleaning and before storing.

Mattress Cover (if included)

Machine wash separately in warm water, gentle cycle using mid soap or detergent. Do not bleach. Tumble dry with low heat, remove immediately after drying. Use cool iron if needed.

LIMITED EXPRESS WARRANTY

Aero Products International, Inc. (“us”) warrants to the original purchaser (“you”) that the AeroBed® (“product”) is guaranteed against defects in materials and workmanship for the following periods: the pump and valve, three (3) years from the date of purchase; the mattress one (1) year from the date of purchase.

CLEANING

OUR EXCLUSIVE OBLIGATION, AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED EXPRESS WARRANTY OR OTHERWISE SHALL BE THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR PARTS WHICH MAY PROVE DEFECTIVE UNDER THE CONDITIONS AND DURING THE PERIODS DESCRIBED ABOVE AT OUR SOLE COST AND EXPENSE. IN THE EVENT THE PRODUCTS OR PARTS CANNOT BE REPAIRED OR REPLACED, YOU SHALL RECEIVE A FULL REFUND OF THE PURCHASE PRICE AT OUR OPTION. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

EXCLUSIONS

Our obligation under this limited express warranty shall not apply if our inspection shows:

A. That the product is used for other than normal indoor sleeping purposes B. Any product or part has been damaged by alteration. C. Any product or part has been subject to accident, misuse, abuse or has been operated contrary to written instructions.

WARRANTY REDEMPTION

You must obtain an authorization from us before returning a defective product. Call us at 1-888-462-4468 or write us for a return authorization. The product should be carefully packaged and delivered postage or delivery charges prepaid at the address set forth below. You are responsible for all damages incurred during shiping.

WARRANTY DISCLAIMER

EXCEPT FOR THE LIMITED EXPRESS WARRANTY SET FORTH IN THIS SECTION, OR ANY IMPLIED WARRANTIES PERMITTED UNDER APPLICABLE LAW, SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATIONS. ALL CLAIMS AGAINST US MUST BE BROUGHT WITHIN ONE (1) YEAR FROM THE TIME THEY ARISE.

LIMITATION OF LIABILITY

TO THE FULLEST EXTENT PERMITTED BY LAW, SELLER SHALL NOT BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WITH RESPECT TO THE SALE OR USE OF THE PRODUCTS, INCLUDING ANY LOST REVENUES, LOSS OF USE OR LOST PROFITS, REGARDLESS OF THE THEORY BY WHICH ANY CLAIM MAY BE BASED, INCLUDING ANY TORT, TANGIBLE PROPERTY DAMAGE OR STATUTORY CAUSES OF ACTION. NOTWITHSTANDING THE TERM OF ANY LIMITED OR IMPLIED WARRANTY, OR IN THE EVENT THAT ANY LIMITED WARRANTY FAILS OF ITS EXCESS ESSENTIAL PURPOSE, IN NO EVENT WILL OUR ENTIRE LIABILITY TO YOU EXCEED THE PURCHASE PRICE ACTUALLY PAID BY YOU FOR THE PRODUCTS, OR ANY DEFECTIVE OR NONCONFORMING PORTION THEREOF, WHICHEVER IS THE LESSER AMOUNT.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS LIMITATION DOES NOT APPLY TO ANY CLAIMS FOR PERSONAL INJURY. THIS AGREEMENT AND ANY CLAIMS AND DISPUTES BETWEEN THE PARTIES SHALL BE GOVERNED BY AND SUBJECT TO THE INTERNAL LAWS (EXCLUSIVE OF THE CONFLICTS OF LAW PROVISIONS) AND DECISIONS OF THE COURTS OF THE STATE OF ILLINOIS. THE EXCLUSIVE VENUE AND JURISDICTION FOR ALL CLAIMS AND DISPUTES SHALL BE THE STATE OR FEDERAL COURT LOCATED IN SCHAUMBURG, ILLINOIS.

Aero Products International, Inc. neither assumes nor authorizes any representative or other person to assume any obligation or liability other than those expressly set forth herein.

Made in China. This product may be covered under one or more of the following U.S. and/or foreign patents: U.S. Pat. Nos. 4,977,633; 5,267, 363; 5,367, 726; 6,237, 621; 6,508, 264; 6,598,626; 6,701,559; 6,755,208; 6,986,360; 6,996,867; 7,025,576; 7,039,972; D464,225; D490,635; D513,145; CN 1809683.2; RU 2271129; SG93011; EP 0 487 641; DE 69024962.4;EP 0 947 152; DE 69233298.7; EP 0 605 624; DE 69230797.4; JP 3,419,774; TW 62301; AU 731613; BR P19710873-1; CN 97196557.9; HK 1025374; MX 216898; NZ 334203; SG 61207; JP 2010828; EP 1 359 325. Other U.S. and foreign patents pending.

If trouble persists, or you have any questions regarding your new Aero® product, please call our Customer Service Department below.

Our Customer Service Department is available Monday-Friday, 9AM to 5PM Central Standard Time. Please call us toll free at 1-888-462-4468. Canada: 1-888-702-8281

AeroBed Domed Valve User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual