Aero Mattress Topper User guide

9029 Rev. 12/01

Mattress Topper

Instruction Manual

_ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

WARRANTY DEPARTMENT
AERO PRODUCTS INTERNATIONAL, INC.
1225 KARL COURT
WAUCONDAIL 60084-1098

PLACE
STAMP

HERE

Manual de Instrucciones

Mode d'emploi

© 2001 Aero Products International, Inc., 1225 Karl Court, Wauconda, IL 60084-1098 USA

Made in China.

Aero®Mattress Topper

Thank you for joining the aero family by purchasing one of our many premium
products. You can expect topnotch quality, innovation, and imagination from every
aero product.

You are about to enjoy the comfort and quality of the aero Mattress Topper, the
finest sleep system available anywhere. It is your responsibility to read and always
follow the safety, care and maintenance instructions for your new aero product.
Always instruct and supervise others on the proper use, maintenance and safety of
your Mattress Topper.

I M P O R TA N T: Preparation of your aero Mattress Topper requires no tools for set up.
Use of tools may damage your new Mattress Topper. For service, please call
customer service.

Read, follow and retain this instruction manual for future reference.

IMPORTANT SAFETY INFORMATION

AND WARNINGS

Mattress Topper

—Product is intended for indoor use only. Do not step or jump on mattress topper or

use as a trampoline. Mattress Topper may puncture if used improperly.

—Standing, jumping or walking on the bed may result in injury and/or damage the

Mattress Topper. Do not jump, stand or walk on the Mattress Topper. You can hurt
yourself or damage the Mattress Topper if you do.

w w w. t h i n k a e r o . c o m

—Do not use this Mattress Topper on abrasive surfaces or near pointed/sharp items

or surfaces. Protruding objects may puncture the Mattress Topper.

—This Mattress Topper is made of cotton/PVC and, therefore, may melt or burn if it

comes in contact with any flame or heat source. Do not place the Mattress Topper
near or against heaters, open flame, or other hot objects.

Pump

!

— WARNING: This is an electrical product – not a toy. To avoid risk of fire, burns,

injury, or shock, it should not be played with or placed where small children can

reach it. Do not use in or around water.
—Unplug pump when not in use.
— WARNING: Pump is an electrical device. Do not use in or around water.

!

—Do not place pump in a location that will block the air intake vents. If carpet is

longer than 1/2inch, place pump on a solid surface to prevent pump from

overheating.
—Do not run pump continuously for more than 20 minutes.
—Pump not recommended for use by children under six (6) years of age.
—Do not attempt to dissemble, repair, or service the pump. No serviceable parts

are contained inside. Contact Aero Products International, Inc. at 1225 Karl Court,

Wauconda, IL 60084 for repair or servicing information.

1

INFLATION AND USE

Your new aero®Mattress Topper can be used on all standard mattresses, sofa beds,
futons, roll away beds and even on the floor, if that’s your preference. Setup is
simple – comfort is superior.

1. Remove your aero Mattress Topper from its packaging. Remove Mattress
Topper, pump, AC plug, cord and air tubing from plastic and shrink wrap.

NOTE: Mattress Topper must be at room temperature prior to inflating.

6. Prior to inflating, place an extra deep mattress
pad and an extra deep fitted sheet (not included)
on top of aero®Mattress Topper as you normally
would. Mattress pad and fitted sheet will keep
your aero Mattress Topper from shifting on your
bed. Tubing from Mattress Topper to pump will
be depressed slightly in this process. This will
not affect proper functioning.

2. Unfold your Mattress Topper and place flat
on bed with tubing connectors at the head
of the bed.

3. Place pump on the floor at the head of the bed.

NOTE: Queen and King size Mattress Toppers
have dual controls. Pump should be placed on

the floor, at the head of the bed, centered
between the connectors.

4. Connect tubing to bed and pump attachments.
Tubing will connect to the head of the mattress
topper and to end of pump. To connect, screw
female end of tubing onto male receptor on
mattress in a clockwise direction. Then connect
remaining end of tubing to pump by screwing
female end of tubing onto male receptor. Make
sure connectors are attached securely.

5. Plug into any standard polarized 110 volt AC
electrical outlet. (NOTE: 220 Volt product sold
outside of North America.)

This product has a polarized attachment plug
(one blade is wider than the other) as a safety
feature. This plug will fit into a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Never use with an
extension cord unless the plug can be fully
inserted. Do not attempt to defeat this safety
feature.

7. Push the inflate button on the control wand for
approximately 2-3 minutes upon first inflation.
Mattress Topper will not over-inflate. (This must
be repeated for additional chamber on Queen
and King sizes. Pump inflates or deflates one
chamber at a time.)

8. Lay on Mattress Topper to adjust firmness to
your preference. To increase firmness, depress
and hold top button on control wand until desired
firmness is achieved. To make softer or less
firm, depress and hold bottom button until
desired firmness is achieved.

9. Continue to make your bed with flat sheet and
additional bedding to your preference.

10. To store control wand when finished adjusting,
slide control wand holder on sheet at side of bed
using clip on back of holder. Control wand easily
slides in and out of holder for easy adjusting.

DEFLATION AND STORAGE

To deflate, simply disconnect tubing from aero Mattress
Topper by unscrewing in a counter clockwise direction.
Apply light pressure to Mattress Topper to force air out.
You can begin to fold the Mattress Topper, which will
help dispel air from the Mattress Topper.

Store your aero Mattress Topper in a clean dry place out
of extreme temperatures. Store your Mattress Topper at
room temperature. Storing your Mattress Topper under
50° F (10°C) and over 100° F (38°C) may affect its
performance and will not be covered under warranty.

NOTE: Mattress Topper must be at room temperature prior to inflating.

2

3

CARE AND MAINTENANCE

1. Keep your aero®Mattress Topper away from any sharp objects or obstacles with
rough edges. Large cuts or snags may not be repairable and will not be covered
by your Mattress Topper warranty.

2. When not in use, store your Mattress Topper and pump in a clean, dry place out of
extreme temperatures. P roduct must be at room temperature prior to inflating.

3. In case of incidental damage to your Mattress Topper, a repair kit with
instructions has been provided. Please follow repair kit instructions carefully.

4. Do not fold/store Mattress Topper in sofa beds, roll-aways or futons. This may cause
damage to your Mattress Topper and will not be covered under your warranty.

5. Periodically check pump for dust. Pump and air vents on pump should be cleaned
on a regular basis. If air vents become blacked or clogged from dust build up this
may cause damage to your pump and it will not be covered under your warranty.

LIMITED WARRANTY

Aero Products International, Inc. warrants to the original purchaser only when the
Mattress Topper is used for normal indoor sleeping purposes, that the Mattress
Topper will be fully guaranteed against defects in material and workmanship for a
period of one (1) year from the date of purchase, provided further that the Mattress
Topper has been operated according to the provided instructions. (Included in your
purchase is a repair kit with instructions.)

The motor will be guaranteed to the original purchaser against defects in materials
and workmanship for a period of one (1) year from the date of purchase provided
the motor has been operated according to the instructions.

Our obligation under this warranty shall be limited to the repair or exchange of any
part or parts which may prove defective under the conditions and during the periods
described above.

Our obligation under this warranty shall not apply if our inspection shows:

CLEANING

Your aero Mattress Topper is constructed from quality 100% cotton sheeting
laminated to heavy-duty vinyl. To remove most stains, use a clear liquid dish
detergent without dye, clean tap water and a clean absorbent white cloth. Wet
stained area thoroughly; gently message stained area with detergent. Blot the area
to remove staining substance. Rinse thoroughly and blot dry. Allow your Mattress
Topper to air dry completely after cleaning and before using or storing.

Dry Cleaning is not recommended and may damage your mattress topper.

TROUBLESHOOTING

1. If Mattress Topper appears to be leaking: Check connector(s) at both the
pump and Mattress Topper. All connectors should be attached securely to the
tubing to prevent air leakage.

2. If your Mattress Topper doesn’t appear to be inflating: Check all connections
and make sure they are tight. NOTE: On Queen and King Mattress Toppers with
dual controls, pump will inflate, deflate or allow adjustments on one side at a
time. Only one control wand will work at a time.

3. If pump does not fit under bed: Place pump on side of bed.

4. For ultimate comfort and performance: Use with an extra thick mattress pad
and deep fitted sheets.

5. If Mattress Topper moves around on mattress: Make sure deep fitted mattress
cover and sheets are securely fit around Mattress Topper and bed mattress.

If trouble persists, please phone our Customer Service center for assistance.
U.S. and Canada: 1-888-462-4468
Monday-Friday, 9 AM to 5 PM Central Standard Time

Or visit our website at: www.thinkaero.com

A. Any product or part that has been damaged by alteration.
B. Any product or part that has been subject to accident, misuse, abuse or has been

operated contrary to Aero Products International, Inc. instructions for the product.

All purchasers must obtain an authorization from Aero Products International, Inc.
before returning a defective product. The product should be carefully packaged and
delivered postage or delivery charges prepaid. The customer shall be responsible
for all damages incurred in shipping.

WARRANTY DISCLAIMER

EXCEPT FOR THE EXPRESS LIMITED WARRANTY SET FORTH ABOVE, AERO
PRODUCTS INTERNATIONAL, INC. MAKES NO EXPRESS OR IMPLIED
WARRANTIES IN THIS AGREEMENT OR OTHERWISE. TO THE FULLEST
EXTENT PERMITTED BY LAW, AERO PRODUCTS INTERNATIONAL, INC.
DISCLAIMS ALL WARRANTIES, WRITTEN, EXPRESS OR IMPLIED, INCLUDING
ALL WARRANTIES OF MERCHANTABILITYAND/OR FITNESS FOR A
PARTICULAR PURPOSE. AERO PRODUCTS INTERNATIONAL, INC.
EXPRESSLY DISCLAIMS ANYAND ALL LIABILITY TO PURCHASER FOR ANY
CONSEQUENTIAL DAMAGES, DAMAGES FOR LOSS OF USE, LOSS OF
PROFITS, PROPERTY DAMAGE, OR ANY OTHER INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF THIS AGREEMENT
OR THEIR OPERATION, FUNCTION OR CHARACTERISTICS OF THE
PRODUCTS PURCHASED HEREUNDER. IT IS EXPRESSLY UNDERSTOOD
THAT THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND
EXCLUSIVE REMEDY OF PURCHASER. NOTWITHSTANDING THE TERMS OF
ANY LIMITED WARRANTY, AND/OR IN THE EVENT ANY LIMITED WARRANTY
PROVIDED TO THE PURCHASER FAILS OF ITS ESSENTIAL PURPOSE, IN NO
EVENT WILL AERO PRODUCTS INTERNATIONAL, INC. ENTIRE LIABILITY TO
PURCHASE EXCEED THE PURCHASE PRICE ACTUALLY PAID BY PURCHASER
FOR THE PRODUCTS HEREUNDER, OR ANY DEFECTIVE PORTION THEREOF,
WHICHEVER IS THE LESS AMOUNT.

54