Aero Deluxe AeroBed, 103R User guide

English 1Français 14 Español 7

Manual de Instrucciones

Mode d'emploi

Deluxe AeroBed

®

Instruction Manual

© Aero Products International, Inc., 1225 Karl Court, Wauconda, IL 60084-1098 USA

Made in China.

WARRANTY DEPARTMENT
AERO PRODUCTS INTERNATIONAL, INC.
1225 KARL COURT
WAUCONDA IL 60084-1098

_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________

PLACE
STAMP

HERE

9035 Rev. 2/03
Model 103R

Questions?

Please visit our web site anytime at

www.ThinkAero.com

or

Call our Customer Service Department at

1-888-462-4468

(operators are available Monday - Friday, 9 AM - 5 PM CST)

1

English

Deluxe AeroBed

®

Thank you for joining the aero®family by purchasing one of our upscale products.
You can expect topnotch quality, innovation and imagination from every aero product.

You are about to enjoy the comfort of the Deluxe AeroBed, the finest alternative
sleeping system available anywhere. It is your responsibility to read and always
follow the safety, care and maintenance instructions for your new aero product.
Always instruct and supervise others on the proper use, maintenance and safety of
your bed.

IMPORTANT: Preparation of your DeluxeAeroBed requires no tools. Use of tools
may damage your bed.

Read, follow and retain this instruction manual for future reference.

IMPORTANT SAFETY INFORMATION

AND WARNINGS

— WARNING:Adult supervision required. Follow all safety instructions to avoid

serious injury.

— WARNING: This is an electrical product - not a toy. To avoid risk of fire, burns,

injury, and shock, it should not be played with or placed where small children can

reach it. Do not use in or around water.
—Remove all sharp objects from area where bed will be set up and used.
—Product is intended for use as an indoor bed only. Do not step or jump on bed or

use as a trampoline. Bed may puncture.
—Place bed in a safe area before use, making sure that there are no sharp edges,

steps, drops, or breakable items nearby. Use on flat surfaces only. Bed may tip

over on uneven surfaces.
—Do not use this bed on abrasive surfaces or near pointed/sharp items or surfaces.

Protruding objects may puncture the bed.
—This bed is made of plastic and therefore may melt or burn if it comes in contact

with any flame or heat source. Do not place it near or against heaters, open flame

or other hot objects.
—Unplug product when not in use.
—Do not attempt to dissemble, repair, or service the pump. No serviceable parts

are contained inside. Contact Aero Products International, Inc. at 1225 Karl Court,

Wauconda, IL 60084, for repair or servicing information.

!

!

aero

Deluxe

www.ThinkAero.com

or

1-888-462-4468

(Mon.- Fri. 9AM – 5PM CST)

AeroBed

®

100% cotton surface

14' cord

May also Include:

• 100% Cotton Mattress Cover

• Durable carry bag

Quick Air Release Valve

(Centered)

Reinforced Quadra Coil® construction

7" side gusset

3

English

DEFLATION AND STORAGE

1. Make sure the bed is unplugged from the electric outlet

prior to deflation.

2. Open the Quick Air Release Valve at the foot of the bed to

release the air.

3. Roll or fold the AC cord with One Touch

®

Comfort Control
block and secure it. Fold sides of bed into the center along
its length. Tightly roll your DeluxeAeroBed

®

around the

pump towards the Air Release Valve end.

4. Roll the bed completely until all air is expelled. When
the Bed is completely rolled, push the Air Release Valve
closed until it locks.

5. Slide the duffel bag over your Deluxe AeroBed. Store your
Deluxe AeroBed in a clean dry place at room temperature
(above 50°F/10° C). Storing your Deluxe AeroBed under 50°
F (10° C) and over 100° F (38° C) may affect its
performance and will not be covered under warranty.

NOTE: Deluxe AeroBed must be at room temperature prior to inflating.

CARE AND MAINTENANCE

1. Inspect your Deluxe AeroBed prior to each use.

2. Keep your Deluxe AeroBed away from any sharp objects. Large cuts or snags
may not be repairable and will not be covered by your warranty.

3. When not in use, store your Deluxe AeroBed in its duffle bag, in a clean, dry
place out of extreme temperatures. Product must be at room temperature prior to
inflating.

4. Do not store your DeluxeAeroBed folded inside sofa beds or roll-aways. This
may cause damage to your Deluxe AeroBed that will not be covered under your
warranty.

5. In case of incidental damage to your bed, a repair kit has been included. Please
follow repair instructions carefully.

CLEANING

Deluxe AeroBed

Your Deluxe AeroBed is constructed from quality cotton laminated to heavy-duty
vinyl. For spot cleaning, use a clear liquid dish detergent without dye, clean tap
water and a clean absorbent white cloth. Wet stained area thoroughly; gently
massage stained area with detergent. Blot the area to remove staining substance.
Rinse thoroughly and blot dry. Allow your bed to air dry completely after cleaning
and before storing.

Cover, if included

The mattress cover is made of 100% cotton. Machine wash in warm water with a
mild soap or detergent. Tumble dry on LOW HEAT.

English

2

INFLATION

Remove your Deluxe AeroBed®from its lightweight duffel bag. Keep bag for storage.

Note: Product must be at room temperature prior to inflating.

1. Place your rolled up bed on the floor or other surface free of obstructions or
sharp objects.

2. Make certain the Quick Air Release Valve located at the foot of the bed is closed.
Bed should be stored with valve in the closed and latched position.

If the Air Release Valve is open, close it by using 2 thumbs to push cover and
snap into valve. Be careful to avoid pushing valve cover to the right or left as it
snaps into the valve opening.

3. Remove AC plug, cord and One Touch

®

Comfort Control from plastic bag and

shrink wrap.

4. Plug into any standard polarized 110 Volt AC electrical outlet. North American
Electrical rating: 120 VAC 60HZ 1.0A(NOTE: 230VAC product sold outside of
North America.)

This product has a polarized attachment plug (one blade is wider than the other)
as a safety feature. This plug will fit into a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Never use with an extension cord unless the plug can be
fully inserted. Do not attempt to defeat this safety feature.

5. Push and hold the button of the One Touch Comfort
Control for approximately 60 seconds to inflate the
Deluxe AeroBed to full (firmest) capacity. Bed will not
over-inflate.

6. Attach the One Touch Comfort Control block to the
inflator by sliding it over the rubber nipple.

7. Lie on the bed to adjust the firmness to your desired level.
a. To make the bed softer, depress the One Touch

Comfort Control block (not the button) and rubber
nipple together.

b. To make the bed firmer, depress only the button of

the One Touch Comfort Control.

This is the closed position. Open Air Release Valve

aero

aero

aero

Close Valve Using 2 Thumbs

60 sec

Inflation

English

4 5

English

TROUBLESHOOTING

Very rarely, your Deluxe AeroBed®may fail to inflate properly. Should this occur,
please use the following check list.

1. If your Deluxe AeroBed doesn’t appear to be inflating:
First, make sure the Quick Air Release Valve is closed

and locked securely.

If the valve is open, close it by using 2 thumbs to push
cover firmly into valve. Be careful to avoid pushing valve
cover to the right or left as it snaps into valve opening.

2. If air leakage from the Quick Air Release Valve occurs:
Carefully inspect the soft round gasket on inside of Quick Air Release Valve

cover. Make sure there is no dirt or debris, cuts, nicks or tears to the gasket.
If there is dirt or debris; clean and use. If cut, nicked or torn, call our Customer
Service center or visit our website to order a replacement part.

3. If trouble persists, please phone our Customer Service center for assistance.
U.S. and Canada: 1-888-462-4468

Monday through Friday, 9 AM to 5 PM Central Standard Time
Or visit our website at : www.ThinkAero.com

LIMITED WARRANTY

Aero Products International, Inc. warrants to the original purchaser only when the
Deluxe AeroBed

®

is used for normal indoor sleeping purposes, that the mattress will
be fully guaranteed against defects in material and workmanship for a period of one
(1) year from the date of purchase, provided further that the Deluxe AeroBed has
been operated according to the provided instructions. (Included in your purchase is
a repair kit with instructions.)

The motor (exclusive of the controller) will be guaranteed to the original purchaser
against defects in materials and workmanship for a period of one (1) year from the
date of purchase provided the motor has been operated according to the
instructions.

Our obligation under this warranty shall be limited to the repair or exchange of any
part or parts which may prove defective under the conditions and during the periods
described above.

Our obligation under this warranty shall not apply if our inspection shows:
A. Any product or part that has been damaged by alteration.
B. Any product or part that has been subject to accident, misuse, abuse or has

been operated contrary to Aero Products International, Inc. instructions for the
product.

All purchasers must obtain an authorization from Aero Products International, Inc.
before returning a defective product. The product should be carefully packaged and
delivered postage or delivery charges prepaid. The customer shall be responsible for
all damages incurred in shipping.