Aereco S-RH Installation And Operating Instructions Manual
TF5710_B-v1-web
HUMIDITY AND TEMPERATURE
AMBIENT AIR SENSOR
INSTALLATION AND OPERATING INSTRUCTIONS
ENGLISH
S-RH/T
1
DESCRIPTION
This sensor measures ambient relative humidity as well as temperature. It
miniaturized sensitive element uses a CMOS capacitive relative humidity
sensor and a band gap temperature sensor, for a very precise and stable
measurement with a very low consumption. The sensor is self calibrated.
The user can choose between two outputs: 0-10V or PWM.
APPLICATIONS
∙ HVAC: Demand Controlled Ventilation, fan control, damper control, air
conditioning control, Indoor Air Quality level indicator, etc.
∙ BMS: Indoor Air Quality level indicator, Indoor Air Quality monitoring, etc.
Specially suitable for rooms where variations of humidity or temperature are
relatively important and can be used to drive a system such as ventilation or
air conditioning: bedrooms, living room, kitchens, bathrooms.
2
WARNINGS
PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE THE
INSTALLATION:
∙ In case of non-compliance with advice and warnings contained
in this manual, the manufacturer can not be considered
responsible for damages to persons or property.
∙ The installation and electrical connections must be carried
out by a qualified technician according to the manufacturer’s
instructions and in compliance with the characteristics of the
product
∙ Before carrying out any operation on the appliance, unplug or
disconnect it from the power supply, and ensure it can not be
accidentally restored.
∙ Power cable modification or replacement must only be carried
out by qualified personnel or by After-sales Service.
Loading...