Aeon Labs ZW080 User Manual

View the expanded manual:

http://aeot.ec/spprt/siren

Aeotec by Aeon Labs Siren Gen5. Familiarise yourself with your Siren Gen5.

No longer just a smart home. Now you own a safe home.

Siren takes the best smart home technology and uses it to help you
build a safe home.

Most smart home systems have a safety flaw: in an emergency they
send your smartphone a push notification. That means that your
safety, and your family’s safety, depends on everyone having a
smartphone, and on those smartphones being turned on, and on the
push notification being heard and read. In other words, your family’s
safety depends on a lot of things going right just when a lot of things
are going wrong.

Siren is better than that.When an emergency is happening it lets you
know. Its 105 dB Speaker System is always heard. Its super-bright
LED system lights your path even when it’s dark. Its backup battery
means that Siren keeps on working even when your power is out or
has been purposefully cut. Siren provides a smart home with the
perfect security and safety features that it needs.

Those security and safety features are matched by smart features.
Siren’s speaker system can access 5 different audio alerts, allowing
your smart home to pick the alert best suited to the emergency. The
speaker system’s volume can also be adjusted so that Siren is
perfect for every space in every home. Best of all, Siren is simple to
install. Plug Siren in, sync it to your smart home, and then enjoy the
peace of mind that comes with knowing that your smart home is now
a safe home.

Action Button
105 dB speaker system
Safety LED
Network LED

105 dB Speaker System

Network LED

Safety LED

Action Button

Quick start.

Getting your Siren up and running is as simple as plugging it into a
wall socket and linking it to your existing Z-Wave
following instructions tell you how to link your Siren to your Z-Wave
network using Aeotec by Aeon Labs’ Z-Stick or Minimote
controllers. If you are using other products as your main Z-Wave
controller, such as aZ-Wave gateway, please refer to the part of their
respective manual that tells you how add new devices to your
network.

®

network. The

If you're using a Z-Stick:

Decide on where you want your Siren to be placed and plug it in to

1.
a wall outlet.Its Network LED will begin to blink for3 seconds when
you short press and quickly release the Action Button.

2.

If your Z-Stick is plugged into a gateway or a computer, unplug it.

3.

Take your Z-Stick to your Siren.

4.

Press the Action Button on your Z-Stick.

5.

If Siren has been successfully linked to your Z-Wave network its
Network LED will no longer blink when you short press and quickly
release the Action button on Siren. If the linking was unsuccessful
and the Network LED continues to blink when you short press and
quickly release the Action button, repeat the above steps.
Press the Action Button on the Z-Stick to take it out of installation

6.

mode and return it to your gateway or computer.

If you're using a Minimote:

Decide on where you want your Siren to be placed and plug it in to

1.

a wall socket. Its Network LED will begin to blink for 3 seconds
when you short press and quickly release the Action Button.

2.

Take your Minimote to your Siren.

3.

Press the Include button on your Minimote.

4.

If Siren has been successfully linked to your Z-Wave network, its
Network LED will no longer blink when you short press and quickly
release the Action Button on Siren. If the linking was unsuccessful
and the Network LED continues to blink when you short press and
quickly release the Action Button repeat the above steps.
Press any button on your Minimote to take it out of installation

5.

mode.

With your Siren now working as a part of your smart home, you’ll be
able to configure it from your home control software. Please refer to
your software’s user guide for precise instructions on configuring
Siren to your needs.

You’re able to test your Siren’s speaker system manually. Please
note that the speaker system is 105 dB and very loud – we
recommend only testing your Siren while wearing the necessary ear
protection given you’ll need to be next to your Siren while manually
testing it. To manually test Siren, pressand hold the Action Button for
5 seconds.

Advanced functions.

Associating dierent tones with dierence events.

Your Siren contains 5 different alert tones, and eachcan be set to be
used for a different type of emergency. One tone is more relevant to
intruder alerts, while others are more relevant to the likes of water
leaks, medical emergencies and door chimes. This functionality can
be setup and configured via supporting Z-Wave gateways. Please
refer to your gateway's user manual for further information.

Removing your Siren Gen5 from a Z-Wave network.

Your Siren can be removed from your Z-Wave network at any time.
You’ll need to use your Z-Wave network’s main controller to do this
and the following instructions tell you how to do this using Aeotec by
Aeon Labs’ Z-Stick and Minimote controllers. If you are using other
products as your main Z-Wave controller, please refer to the part of
their respective manualsthat tells you how remove devices from your
network.

If you're using a Z-Stick:

1.

If your Z-Stick is plugged into a gateway or a computer, unplug it.

2.

Take your Z-Stick to your Siren.

3.

Press the Action Button on your Z-Stick.

4.

Press the Action Button on your Siren.

5.

If your Siren has been successfully removed from your network, its
Network LED will blink for 3 seconds when you short press and
quickly release your Siren’s Action Button. If the removal was
unsuccessful, the Network LED will not blink.

6.

Press the Action Button on the Z-Stick to take it out of removal
mode.

If you're using a Minimote:

Remove

Take your Minimote to your Siren.

1.

Press the Remove Button on your Minimote.

2.

Press the Action Button on your Siren.

3.

If your Siren has been successfully removed from your network, its

4.

Network LED will blink for 3 seconds when you short press and
quickly release your Siren’s Action Button. If the removal was
unsuccessful, the Network LED will not blink.
Press any button on your Minimote to take it out of removal mode.

5.

Resetting your Siren Gen5

At some stage, you may wish to reset all of your Siren’s settings to
their factory defaults. To do this, press and hold the Action Button for
20 seconds and then release it. Your Siren will now be reset to its
original settings, and the speaker system will sound for 3 seconds as
a confirmation.

Technical speccations.

Model number: ZW080
Built-in Lithium Battery: 430 mAh.
Alarm Power: 1.7W.
Max Standby Power: 0.7W.
Max Volume: 105 dB, reduced in battery powered mode.
Operating Temperature: 0-45ȭ
Operating Distance: Up to 550 feet/170 metres outdoors.

Version Working band

Input(Standby Power)

AU 230V 50Hz,Max:30mA

BR 220V 60Hz,Max:30mA 921.42MHz

CN 220V 50Hz,Max:30mA 868.40MHz

EU 230V 50Hz,Max:30mA 868.42MHz

IL 230V 50Hz,Max:30mA 916.02MHz

IN 230V 50Hz,Max:30mA 865.20MHz

UK 230V 50Hz,Max:30mA 868.42MHz

US 120V 60Hz,Max:30mA 908.42MHz

6

Warranty.

Aeon Labs warrants to the original purchaser of Products that for the
Warranty Period (as defined below), the Products will be free from
material defects in materials and workmanship. The foregoing
warranty is subject to the proper installation, operation and
maintenance of the Products in accordance with installation
instructions and the operating manual supplied to Customer.
Warranty claims must be made by Customer in writing within thirty
(30) days of the manifestation of a problem. Aeon Labs' sole
obligation under the foregoing warranty is, at Aeon Labs' option, to
repair, replace or correct any such defect that was present at the time
of delivery, or to remove the Products and to refund the purchase
price to Customer.

The "Warranty Period" begins on the date the Products is delivered
and continues for 12 months.

Any repairs under this warranty must be conducted by an authorized
Aeon Labs service representative and under Aeon Labs' RMA policy.
Any repairs conducted by unauthorized persons shall void this
warranty.

921.42MHz

Excluded from the warranty are problems due to accidents, acts of
God, civil or military authority, civil disturbance, war, strikes, fires,
other catastrophes, misuse, misapplication, storage damage,
negligence, electrical power problems, or modification to the
Products or its components.

Aeon Labs does not authorize any person or party to assume or
create for it any other obligation or liability in connection with the
Products except as set forth herein.

Aeon Labs will pass on to Customer all manufacturers’ Material
warranties to the extent that they are transferable, but will not
independently warrant any Material.

Customer must prepay shipping and transportation charges for
returned Products, and insure the shipment or accept the risk of loss
or damage during such shipment and transportation. Aeon Labs will
ship the repaired or replacement products to Customer freight
prepaid.

Customer shall indemnify, defend, and hold Aeon Labs and Aeon
Labs' affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless from all
demands, claims, actions, causes of action, proceedings, suits,
assessments, losses,
fines, penalties, interest, costs and expenses (including fees and
disbursements of counsel) of every kind (i) based upon personal
injury or death or injury to property to the extent any of the foregoing
is proximately caused either by a defective product (including strict
liability in tort) or by the negligent or willful acts or omissions of
Customer or its officers,employees, subcontractors or agents, and/or
(ii) arising from or relating to any actual or alleged infringement
misappropriation of any patent, trademark, mask work, copyright,
trade secret or any actual or alleged violation of any otherintellectual
property rights arising from orin connection with the products, except
to the extent that such infringement exists as a result of Aeon Labs'
manufacturing processes.

damages, liabilities, settlements, judgments,

IN NO EVENT SHALL AEON LABS BE LIABLE FOR ANY
INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF
PROFITS, REVENUE, OR USE INCURRED BY CUSTOMER OR
ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT, OR
TORT, OR OTHERWISE EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AEON LABS' LIABILITY AND CUSTOMER'S
EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING IN
CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE
OF THE PRODUCTS, WHETHER BASED ON NEGLIGENCE,
STRICT LIABILITY, BREACH OF WARRANTY, BREACH OF
AGREEMENT, OR EQUITABLE PRINCIPLES, IS EXPRESSLY
LIMITED TO, AT AEON LABS' OPTION, REPLACEMENT OF, OR
REPAYMENT OF THE PURCHASE PRICE FOR THAT PORTION
OF PRODUCTS WITH RESPECT TO WHICH DAMAGES ARE
CLAIMED. ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS
SHALL BE DEEMED WAIVED UNLESS MADE IN WRITING
WITHIN THIRTY (30) DAYS FROM AEON LABS'S DELIVERY, OR
THE DATE FIXED FOR DELIVERY IN THE EVENT OF
NONDELIVERY.

THE INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER INDEMNITIES OR WARRANTIES,
WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.

FCC NOTICE (for USA)

or

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH
MODIFICATIONS OR CHANGE COULD VOID THE USER'S

AUTHORITY TO OPERATE THE EQUIPMENT.

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:

1.This device may not cause harmful interference, and

2.

This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer

help.

Do not dispose of electrical appliances as unsorted municipal waste,
use separate collection facilities.

Contact your local government for information regarding the
collection systems available.

or an experienced radio/TV technician for

does cause harmful

Z-Wave and Z-Wave Plus are registered trademarks of Sigma Designs and its
subsidiaries in the United States and other countries

Version: 501008000001-AA