Aeon Labs FT100 User Manual
Warning
Do not dispose of electrical appliances as unsorted municipal
waste, use separate collection facilities.
Contact your local government for information regarding the
collection systems available.
Certications (regional):
Z-Wave and Z-Wave Plus are registered
trademarks of Sigma Designs and its subsidiaries in
the United States and other countries
FCC ID: XBAFT100
Version: 501010000001-AA www.aeotec.com
MULTISENSOR 6
M
odel: FT100-A
View the expanded manual:
http://aeotec.com/support
THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY LOCATIONS.
DO NOT IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY EXPOSED
TO WATER.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1
This device may not cause harmful interference, and
2
This device must accept any interference received, including
interference that may cause undesired operation. This equipment
has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide re as on ab le p ro te ct io n ag ai ns t
ha rm fu l interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consul the dealer or an experienced radio/TV technician for
help.
21
intellectual property rights arising from or in connection with the
products, except to the extent that such infringement exists as a
result of Aeon Labs' manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIAB
PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF
PROFITS, REVENUE, OR USE INCURRED BY CUSTOMER OR ANY THIRD
PARTY, WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR OTHERWISE
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. AEON LABS'
LIABILITY AND CUSTOMER'S EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING IN
CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF THE PRODUCTS,
WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY,
BREACH OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS EXPRESSLY LIMITED
TO, AT AEON LABS' OPTION, REPLACEMENT OF, OR REPAYMENT OF THE
PURCHASE PRICE FOR THAT PORTION OF PRODUCTS WITH RESPECT TO WHICH
DAMAGES ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL BE DEEMED WAIVED
UNLESS MADE IN WRITING WITHIN THIRTY (30) DAYS FROM AEON LABS'S DELIVERY,
OR THE DATE FIXED FOR DELIVERY IN THE EVENT OF NONDELIVERY.
THE INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
INDEMNITIES OR WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
E (for USA)
FCC NOT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO
THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
LE FOR ANY INDIRECT, INCIDENTAL,
20
Aeotec by Aeon Labs MultiSensor.
Motion sensor. Humidity sensor. Thermometer. Light sensor.
Ultraviolet sensor. Vibration sensor.
The corner of your room just got smarter.
Aeotec by Aeon Labs’ MultiSensor looks like a motion sensor and it
acts like one too. But it’s also so much more. Installing this 1 piece
of Z-Wave® technology is the same as installing 6 pieces of Z-Wave
technology. Your home control network will immediately understand
motion, temperature, humidity, light, Ultraviolet and Vibration
readings wherever MultiSensor installed. Those intelligent readings
will equate to intelligence automation. And intelligent automation will
give you the perfect, smart home.
Familiarize yourself with your MultiSensor.
Your MultiSensor comes packaged with a number of accessories
that will help with its installation and operation.
Package Contents:
MultiSensor
1.
Battery Cover
2.
Back-Mount Arm
3.
Double-Sided Tape
4.
Screws (×2)
5.
Micro USB Cable
6.
1
Unlock
Excluded from the warranty are problems due to accidents, acts
of God, civil or military authority, civil disturbance, war, strikes,
res, other catastrophes, misuse, misapplication, storage damage,
negligence, electrical power problems, or modification to the
6
1
2
Screw hole
Battery cover
Lock
USB
Action Button
Battery Holder
3
Light Sensor
and UV Sensor
2
Back - Mount Arm
54
Motion Sensor
RGB LED
Temperature Sensor
Products or its components.
Aeon Labs does not authorize any person or party to assume or
create for it any other obligation or liability in connection with the
Products except as set forth herein.
Aeon Labs will pass on to Customer all manufacturers’ Material
warranties to the extent that they are transferable, but will not
independently warrant any Material.
Customer must prepay shipping and transportation charges for
returned Products, and insure the shipment or accept the risk of
loss or damage during such shipment and transportation. Aeon
Labs will ship the repaired or replacement products to Customer
freight prepaid.
Customer shall indemnify, defend, and hold Aeon Labs and Aeon
Labs' affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless from all
demands, claims, actions, causes of action, proceedings, suits,
assessments, losses, damages, liabilities, settlements, judgments,
nes, penalties, interest, costs and expenses (including fees and
disbursements of counsel) of every kind (i) based upon personal
injury or death or injury to property to the extent any of the foregoing
is proximately caused either by a defective product (including strict
liability in tort) or by the negligent or willful acts or omissions of
Customer or its ofcers, employees, subcontractors or agents, and/
or (ii) arising from or relating to any actual or alleged infringement
or misappropriation of any patent, trademark, mask work, copyright,
trade secret or any actual or alleged violation of any other
19
Loading...