Page 1
Thermal Imaging IR Camera
Model 1950
Quick Start Guide
ENGLISH
www.aemc.com
Page 2
2
Page 3
ATTENTION
An infrared camera is a sensitive optical measuring
device. Pay special attention to the following points:
1. Never aim the camera at the sun, a laser welding, or other source of powerful thermal radiation.
2. Avoid exposure to dust with the lens flap open.
3. Do not touch the lens with your fingers.
4. Avoid jolting or dropping the camera.
If parts of the camera are damaged or not functioning as
expected following failure to heed the warnings listed
above, neither the manufacturer nor the distributor shall
be held liable, and all costs incurred shall be borne
solely by the operator.
Symbols used on the instrument:
The CE marking indicates complian ce w it h t he European
"Low Voltage" and "Electromagnetic Compatibility"
directives (2006/95/E C an d 2004/108/EC).
In the European Union, this pr oduct is subject to selective
collection and recycling at end-of-life as waste electric and
electronic equipment under directive 2002/96/EC (WEEE):
this equipment must not be treated as an ordinary
household waste. The spent batteries must not be treated
as household wastes. Ta ke t hem to t he appropriate
collection point for recycli ng.
This product is designed to all ow the recovery and
recycling of most of its cons t ituents.
3
Page 4
ORDERING INFORMATION
Receiving Your Shipment
Upon receiving your shipment, make sure that the contents
are consistent with the packing list. Notify your distributor of
any missing items. If the equipment appears to be damaged,
file a claim immediately with the carrier and notify your
distributor at once, giving a detailed description of any
damage. Save the damaged packing container to
substantiate your claim.
Ordering Information
Thermal Imaging IR Camera Model 1950 .... Cat. #2121.40
Includes carrying case, external battery charger, USB cable,
four NiMh rechargeable batteries, micro SD card, Bluetooth
headphone, quick start guide, and a USB drive containing
the user manual, analysis software and software manual.
Replacement Parts:
Case – Carrying Case with Foam Insert ...... Cat. #2121.60
Adapter – US External Battery Charger ....... Cat. #2121.64
Cable – USB (Type A to 5-pin Mini-B) ......... Cat. #2126.49
4
Page 5
1. QUICK START STEPS
The following steps assume default settings:
1. Insert charged batteries in the camera (if not
already installed).
2. Insert the micro SD memory card into its slot.
3. O pen the flap protecting the lenses.
4. Press the ON/OFF key:
- If you have installed new batteries,
configure Battery Manager (see instructions
in the User Manual § 1.2.1).
- If prompted, enter the date and time.
5. Aim at the target. An IR image (thermogram)
of the target appears in the display.
6. To s ave the thermogram and its associated
visible light image, press F2 to freeze the
image and then press F3. The images are
saved in a file in the micro SD card.
7. You can recall and view saved images on the
camera, or transfer images to a computer
(using the USB cable or a micro SD card
reader) for analysis and report generation with
the provided CAmReport software.
NOTE: For more information, refer to the User
Manual on the USB drive.
5
Page 6
2. FRONT VIEW
Lens protection flap
Visible camera lens
Infrared camera lens
Multiple-function trigger
6
Page 7
3. SIDE VIEW
SD card slot
Rubber flap
USB connector
Keypad
Multiple-function
trigger
7
Page 8
4. KEY FUNCTIONS
on screen
Multiple-function keys
associated with the display
ON/OFF key
Up/Down/Right/
Left Arrow navigation keys
8
Page 9
5. BATTERY COMPARTMENT COVER
Tab locking the quarterturn screw
Quarter-turn screw for
opening the cover
¼" camera tripod insert
9
Page 10
6. DISPLAY
10
Page 11
7. STATUS BAR
11
Page 12
Chauvin Arnoux®, Inc. d.b.a AEMC® Instruments
15 Faraday Drive • Dover, NH 03820 USA
99-MAN 100433 v5 09/17
www.aemc.com
12
Loading...