AEMC SR600 Data sheet

AC Current Probe Model SR600

The Model SR600 is designed for use
in industrial and utility environments.
The unique ergonomic design allows it
to easily clamp onto cables or small
bus bars. It is built to the highest safety
and performance standards including
the CE Mark and is UL approved for
Canada and United States.

Excellent transformation and low
phase shift, plus a broad frequency
response, permit accurate measure­ments of current for power and power
quality measurements. The high
quality magnetic cores and uniform
windings provide sensitivity for very
low level current measurements, as
well as measurements up to 1200A
The Model SR600 works as a
traditional current transformer (with
a ratio of 1000:1) and provides current
outputs in mA/A for use on DMMs,
power and harmonic meters, data
loggers, recorders or instruments with
current ranges.

a c .

Features

• Measurement range of

100mA to 1200A

• Large jaw opening accommodates

conductors up to two 500MCM
conductors

• Ergonomic design and easy

operation

• Conforms to EN 61010, 600V Cat. III

safety standard

• Low phase shift for power

measurements

• Available with mA output signals

• Designed for DMMs, recorders,

loggers, oscilloscopes, power and
harmonic meters

• ULapprovedforCanadaand
United States

• DoubleInsulation

• CE Mark

a c

Applications

• Power quality measuring

• Low industrial loads

• Measuring around cable bundles

• Power load monitoring

• Waveform analysis

SR600_211342 (pdf) 0308 Rev. 05

Technical Assistance [phone] www.aemc.com 1 of 4

Specifications

MODEL SR600

ELECTRICAL

Nominal Range 1000A
Measurement Range 0.1 to 1200A
Transformation Ratio 1000: 1
Output Signal 1mA
Accuracy (1000A Range)

0.1 to 10A ≤ 3% + 0.1A
50A 1.5% of Reading
200A 0.75% of Reading
1000A 0.5% of Reading
1200A 0.5% of Reading
Phase Shift (1000A Range)

50A 1.5°
200A 0.75
1000A 0.5°
1200A 0.5°

Overload 1200A for 40 min ON, 20 min OFF
Frequency Range 30Hz to 5kHz; current derating

above 1kHz using the formula:
1000A x 1/F (in kHz)

Load Impedance 5Ω max
Working/Common

Mode Voltage
Output Termination Jack

MECHANICAL

Operating Temperature -14° to 122°F (-10° to 50°C)
Storage Temperature -4° to 158°F (-20° to 70°C)
Operating Relative

Humidity
Jaw Opening 2.25" (57mm) max

Maximum Conductor Size 2.05" (52mm)
Maximum Bus Bar Size One 1.95 x 0.19" (50 x 5mm)

Dimensions 4.37 x 8.50 x 1.77" (111 x 216 x 45mm)
Weight 1.21 lbs (550g)

Polycarbonate Material Handles: Polycarbonate + ABS, Gray, UL94 V0. Jaws: Polycarbonate, Red, UL94 V0

SAFETY

Electrical EN 61010-2-32

UL Approval Yes – Canada and United States
Double Insulation Yes

CE Mark Yes

Note: Reference conditions: 23 ± 3°K, 20 to 75% RH, 48 to 65Hz, external magnetic field < 40A/m, no DC component, no external current

carrying conductor, test sample centered. Load impedance 0.2Ω @ lead < 40mΩ for 250A range.

a c /Aa c : (1Aa c @ 1000A)

600V Cat. III

0 to 85% @ 35°C

SR600_211342 (pdf) 0308 Rev. 05

Technical Assistance [phone] www.aemc.com 2 of 4

4.37" (111mm)

3.98" (101mm)

2.25" (57mm)

8.50" (216mm)

1.71" (43.5mm)

3.90" (99mm)

2.13"

(54.1mm)

1.22" (31mm)

1.38" (35mm)

1.77"

(45mm)

Ø=2.05" (52mm)

Conductor size

max.

Jacks:

Two standard
safety banana
jacks (4mm)

ORDERING INFORMATION CATALOG NO.

AC Current Probe Model SR600 (Jack – 1mA/A – 1000A max) ..................................... Cat. #2113.42

Includes a user manual

Accessories (Optional)

Leads, set of two, 5 ft safety (1000V) ............................................................Cat. #2111.29

Banana plug adaptor (Safety Leads to nonrecessed plug) ...........................................Cat. #1017.45

Banana (Female) – BNC (Male) Adaptor .........................................................Cat. #2118.46

Technical Assistance [phone] www.aemc.com 3 of 4

SR600_211342 (pdf) 0308 Rev. 05

Contact Us

United States & Canada:

Chauvin Arnoux
d.b.a. AEMC
200 Foxborough Blvd.
Foxborough, MA 02035 USA

(508)698-2115•Fax(508)698-2118

www.aemc.com

Customer Support – for placing an order, obtaining price & delivery:

[e-mail]

Sales Department – for general sales information:

[e-mail]

Repair and Calibration Service – for information on repair & calibration, obtaining a user manual:
[e-mail]

Technical and Product Application Support – for technical and application support:

[e-mail]

Webmaster – for information regarding www.aemc.com:

[e-mail]

®

, Inc.

®

Instruments

South America, Central America, Mexico, Caribbean, Australia & New Zealand:

Chauvin Arnoux
d.b.a. AEMC

®

, Inc.

®

Instruments
15 Faraday Drive
Dover, NH 03820 USA
(978)526-7667•Fax(978)526-7605
[e-mail]
www.aemc.com

All other countries:

Chauvin Arnoux SCA
190, rue Championnet
75876 Paris Cedex 18, France
33144854528•Fax33146277389
[e-mail]
www.chauvin-arnoux.com

SR600_211342 (pdf) 0308 Rev. 05

Technical Assistance [phone] www.aemc.com 4 of 4