AEMC PEL102, PEL103 Quick Start Guide



QUICK START

USER GUIDE

PEL 102
PEL 103

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments
certifies that this instrument has been calibrated using
standards and instruments traceable to international
standards.

We guarantee that at the time of shipping your
instrument has met its published specifications.

An NIST traceable certificate may be requested at
the time of purchase, or obtained by returning the
instrument to our repair and calibration facility, for
a nominal charge.

The recommended calibration interval for this
instrument is 12 months and begins on the date of
receipt by the customer. For recalibration, please
use our calibration services. Refer to our repair and
calibration section at www.aemc.com.

Serial #: ________________________________

Catalog #: 2137.51 / 2137.52 / 2137.61 / 2137.62

Model #: PEL 102 / PEL 103

Please fill in the appropriate date as indicated:

Date Received: _________________________________

Date Calibration Due: _______________________

Chauvin Arnoux®, Inc.
d.b.a AEMC® Instruments

www.aemc.com

Shipping Contents:

PRODUCT PACKAGING

(1) Small Classic Tool Bag

Cat. #2133.72

Power & Energy Logger Model PEL 102

(1) of the following:

Power & Energy Logger Model PEL 103

Cat. #2137.51 / 2137.52 / 2137.61 / 2137.62

(4) Black Test Leads and Alligator Clips

Cat. #2137.76

Also Included:

(1) Safety Sheet for the PEL

(1) Safety Sheet for the MiniFlex® Sensors

(1) Compliance Sheet

(1) 2 GB SD-Card

(1) Quick Start User Guide

(1) 4 GB USB Stick with User Manual & DataView® Software

(1) Battery (NiMH AAA 8.4V) - Cat.#2137.75

(12) ID Markers

Cat. #2140.45

(1) USB SD-Card Adapter

Cat. #5000.45

(1) Multifix (mounting system)

Cat. #5000.44

(3) MiniFlex® MA193-10-BK

Cat. #2140.48

(included only with

the purchase of

Cat. #2137.51 or Cat. #2137.52)

(1) Power Cord

Cat. #5000.14

(1) 5 ft USB Cable

Cat. #2140.46

USB STICK: DataView® software and user manuals for the Power Energy Logger (PEL)

and Current Probes can be found on the USB stick supplied with the instrument.

Control Features

PEL 102

Same features as the PEL
103

without the LCD, Enter or
Navigation buttons.

ENTER BUTTON

(PEL 103 Only):

Displays partial energies (long push).

1

NAVIGATION BUTTON

2

(PEL 103 Only):

Enables browsing and the selection of

3

displayed data.

4

5

ON/OFF BUTTON:

6

- To turn ON: Connect the power cord
into an AC outlet.

- To turn OFF: Disconnect the power

7

cord from the AC outlet, then press
the ON/OFF button for >2s.

NOTE: The instrument cannot be turned OFF
while connected to an AC outlet or if a recording
is in progress.

PEL 103

CONTROL BUTTON:

Starts/stops the recording session and
enables/disables Bluetooth.

The function is obtained by a 2s press on
the CONTROL button, which causes the
lighting of the REC LED for 3s followed
by the Bluetooth LED, in sequence.

REC LED (START/STOP)

- A release while lit starts recording
(if stopped)

- A release while lit stops recording
(if started)

BLUETOOTH LED (ON/OFF)

- A release while lit enables Bluetooth
(if disabled)

- A release while lit disables Bluetooth
(if enabled)

TOP VIEW: Lead Inputs

Voltage Inputs

Location for Color-coded ID Markers

(see page 7 for input connection diagram)

Current Inputs

BOTTOM VIEW: Connections

Power Cord
Connection

SD Card

Slot

USB

Connection

Ethernet

RJ 45

8

9