Page 1
CURRENT MEASUREMENT PROBES
40
MR SERIES AC/DC CURRENT PROBES
MODELS MR417 / 527
Hall Effect AC/DC current probes for Oscilloscopes
and other instruments with waveform displays
SPECIFICATIONS
MODEL MR417 MR527
ELECTRICAL
Current Range
Output Signal 10mV/A, 1mV/A
Frequency Range DC to 30kHz (-3dB) (depending of current value)
Phase Shift At 50/60Hz
Load Impedance >1MΩ and ≤100pF
Overload 3000Adc or 1000Aac continuous for < 1kHz
Zero Adjust Automatic on both ranges
Power Supply
Battery Life 50H typical
Low Battery Indication Green LED blinking
Overload Indication Red LED on when measurement > than selected range
Output Termination 6.5 ft (2 m) coaxial cable with insulated BNC terminal
MECHANICAL
Maximum
Conductor Size
Dimensions (H x W x D)
Weight (with Battery) 0.98lbs (440g) 1.15lbs (520g)
ENVIRONMENTAL
Operating Temperature 14° to +131°F (-10 to +55°C)
Storage Temperature -40° to +176°F (-40 to +80°C)
Relative Humidity Up to 85% @ 35°C
SAFETY
Ingress Protection IP 40
EMC EN 61326-1
Safety Rating IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III
0.5 to 40Aac, 60Adc
0.5 to 400A
(1) 0.18” (30mm) or (2) .94" (24mm)
(1) 1.97 x 0.39” (50 x 10mm) or
(2) 1.23 x 0.39" (31.5 x 10mm) or
(3) 0.98 x 0.31" (25 x 8mm)
8.82 x 3.82 x 1.73”
(224 x 97 x 44mm)
ac, 600Adc
≤2°@ 40A
≤1.5° @ 400A
9V alkaline Battery (NEDA 1060A, 6LR61)
or 5V DC Micro-USB type B
Cables:
Bus Bar:
0.5 to 100Aac, 150Adc
0.5 to 1000A
(1) 1.5” (39mm) or (2) 1" (25.4mm)
(1) 1.97 x 0.49” (50 x 12.5mm) or
(2) 0.98 x 0.2" (25 x 5mm);
(1) 1.24 x 0.30" (31.5 x 10mm
(3) 0.98 x 0.31" (25 x 8mm)
9.31 x 3.82 x 1.73”
(236.5 x 97 x 44mm)
ac, 1400Adc
≤2.2°@ 100A
≤1.5° @ 1000A
Cables:
Bus Bar :
) or
MR417 MR527
IP
FEATURES
• The jaw shape enables users to
clamp on to cables or small bus bars
• Powered by battery or standard
external 5V power supply via microUSB connector
• Measures up to 1000Aac and
1400Adc (model dependent)
•
Equipped with a Zero DC reset function
• Auto Power Off enable/disable function
•
LED overload and low battery indicators
• Millivolt output compatible with most
equipment and instruments
• Equipped with a coaxial lead and
isolated BNC connectors for direct
connection to an oscilloscope
• Battery life up to 50 hours
• Safety rating 600V CATIII
CATALOG NO. DESCRIPTION
1200.84 AC/DC Current Probe Model MR417 (40A
1200.85 AC/DC Current Probe Model MR527 (100A
www.aemc.com
ac, 60Adc, 10mV/A & 400Aac, 600Adc, 1mV/A, BNC Output) Replaces MR461
ac, 150Adc, 10mV/A & 1000Aac, 1400Adc, 1mV/A, BNC Output) Replaces MR561
Technical Assistance (800) 343-1391
Loading...