AEMC MR411 Data sheet

CURRENT MEASUREMENT PROBES

AC/DC Current Probes & DC/AC MicroProbes

MR400 & MR500 Series

AC/DC current probes designed to extend
current measuring capabilities of DMMs,
oscilloscopes and other instruments

SpecificationS

MODELS MR411 MR521

Measurement
Range AC

Measurement
Range DC

Output Signal
Voltage (mV)

(AC in AC, DC in DC)

Maximum
Conductor Size
Ø Cable

Bus Bar

Output
Connection

Power Source

0.5 to 40A

0.5 to 400A

0.5 to 60A

0.5 to 600A

10mV/A

1mV/A

One 1.18" (30mm)
Two 0.95" (24mm)

Two x 500kcmil

Two 1.2 x 0.4"
(31.5 x 10mm)

Lead with

safety banana plug

One 9V Alkaline battery (included)

0.5 to 100A

0.5 to 1000A

0.5 to 150A

0.5 to 1500A

10mV/A

1mV/A

One 1.5" (39mm)

Two 0.98" (25mm)

Two 1.96 x 0.19"

(50 x 5mm)

Lead with

safety banana plug

featureS

• MR400 Series has a

measurement range of 400AAC/600ADC

• MR500 Series has a measurement range of

1000AAC/1500ADC

• Two distinct jaw shapes to be used for hooking

or prying around the conductor

• Low phase shift for power measurements

• Designed for DMMs, recorders, oscilloscopes,

power and harmonic meters

• EN 61010, 600V CAT III, 300V CAT IV,

Pollution Degree 2

Models K100 & K110

Very small and compact, our microprobes
are designed for accurate measurements of
very low currents with 50µA

SpecificationS

MODELS K100 K110

Current Range

Output (Vout)

Resolution

Accuracy

Output Noise

Frequency
Response

Power Source

Battery Life

0 to ± 4.5A

DC: 50μA typical,
AC: 100μA typical

DC: ±1% of Reading

AC: ±2% of Reading,

<100μV, DC to 3kHz <100μV, DC to 3kHz

(@ -3dB sine)

DC

0 to 3Arms

1mV/mA 10mV/mA

DC: ±0.5% of Reading

± 200μA,

AC: ±0.8% of Reading,

± 200μA

DC to 2kHz

One 9V Alkaline battery (included)

20 hours

dc sensitivity

0 to ± 450mADC

0 to 300mArms

DC: 50μA typical,

AC: 100μA typical

± 150μA,

± 200μA

DC to 1.5kHz

(@ -3dB sine)

featureS

• Measures extremely

• Outputs signal proportional to total current

• Low noise

• Ultra-compact size and non-contact clamp-on

• Simple plug-in operation

• Designed for use with digital multimeters and

• Accurate display of waveforms

• No range or mode (AC/DC) switching required

• Red LED indicates momentary or continuous

• Green LED indicates power and battery condition

Model K100

low level DC from 100μA

(DC + AC)

convenience

oscilloscopes

overload

CATALOG NO. DESCRIPTION

1200.68 AC/DC Current Probe Model MR411 (Lead – 10mV/A – 60A max & 1mV/A – 600A max)

1200.69 AC/DC Current Probe Model MR521 (Lead – 10mV/A – 150A max & 1mV/A 1500A – max)

1200.67 DC/AC MicroProbe Model K100 (1mV/mA – 4.5A max)

2111.73 DC/AC MicroProbe Model K110 (10mV/mA – 450mA max)

86

www.aemc.com

Technical Assistance [phone]

PRICE NIST CALIBRATION

$ 364.00 $ 65.00
$ 389.00 $ 65.00
$ 635.00 $ 65.00
$ 675.00 $ 65.00