AEMC L562 Data sheet
POWER QUALITY ANALYZERS, METERS & LOGGERS
GROUND RESISTANCE TESTER
Simple Logger® II TRMS Current
Three-Phase Power Quality Analyzer
Simple Logger® II TRMS Voltage & Current
DATA LOGGERS
DATA LOGGERS
Multi-Function
Two input channel logger capable of
recording Arms, Vrms and VA
SPECIFICATIONS
MODEL L562
ELECTRICAL
IP
40
Rated
FEATURES
• 2 input channels
• Voltage: 0 to 600VAC TRMS
• Current: compatible with voltage output
AC current probes with voltage outputs
• 64 samples per cycle
• Records Arms, Vrms & VA
(VA displays in DataView® software)
• 4 user selectable storage modes
• Programmable storage rates from 8 every
second to 1 every day
• Stores up to 240,000 measurements in
non-volatile memory
• Powered by standard Alkaline batteries
• Lightweight, compact, fits anywhere
• 5 LED indicators quickly and clearly
display logger status
• Includes FREE DataView® software for
data storage, real-time display, analysis
and report generation
• Optically isolated USB 2.0 communication
cable included
• Complies with EN 61010-1; 300V CAT IV;
600V CAT III (a safety rated current probe
is required)
Channels
Connection Current Channel Voltage Channel
Input Connection
Input Range*
Resolution
Accuracy (50/60Hz)
Input Impedance
Maximum
Input Voltage***
Sample Rate
Storage Rate
Storage Modes
Recording Length
Memory
Communication
Power Source**
Battery Life
MECHANICAL
Dimensions
Max Conductor Size
Weight (with battery)
Case
Vibration
Shock
Drop
*The native measurement of the instrument is voltage.
This voltage is scaled to display current corresponding to the users probe selection.
This accuracy specification does not account for probe errors.
**A memory backup provides backup power while the batteries are being changed.
***Input level beyond this range may damage the instrument.
0 to 1V
probes with a voltage output)
±(0.5% of Reading + 1mV)
±(0.5% of Reading + 0.5mV)
Start/Stop, FIFO, Extended Recording Mode (XRM
BNC Two recessed banana jacks
ac (for use with current
0.1mV 0.1V
0 to 10mV unspecified
10 to 50mV:
50 to 1000mV:
800kΩ 40MΩ
5Vrms or ± 7.07V peak 1.2 x 600V
Programmable from 8 every second to 1 every day
15 minutes to 8 weeks, programmable using DataView
240,000 measurement (512KB).
The recorded data is stored in non-volatile memory and
will be retained even if the battery is low or removed.
USB 2.0 optically isolated
2 x 1.5V AA-cell Alkaline batteries (included)
(dependent on sample rate and recording length)
5.38 x 2.75 x 1.28" (136 x 70 x 32mm)
Current probe dependent
IEC 68-2-6 (1.5mm, 10 to 55Hz)
Two
64 samples/cycle
100 hours to > 45 days
6.4 oz (181g)
UL94-VO
IEC 68-2-27 (30G)
IEC 68-2-32 (1m)
Model L562
0 to 600V
ac
0 to 5V unspecified
5 to 50V:
±(0.5% of Reading + 1V)
50 to 600V:
±(0.5% of Reading + 0.5V)
™
) and Alarm
®
Special
product
features
▼
APPLICATIONS
• Single phase power monitoring
• Residential, commercial, industrial,
troubleshooting
• Find sags and surges
• Track energy usage
• Start-Stop time stamping
CATALOG NO. DESCRIPTION
2126.35 Simple Logger® II Model L562 (2-Channel, TRMS, Voltage & Current, DataView® software)
Technical Assistance (800) 343-1391
PRODUCT INCLUDES
Set of two color-coded 5 ft voltage leads,
color-coded alligator clips (red/black),
USB type A to 5 pin Mini-B, and USB
stick supplied with DataView® software
and user manual.
www.aemc.com
DATA LOGGERS
Probe Selection Chart
AEMC
MODEL
NUMBER
MN261
JM830A
JM861
MF 300-6-2-10
300-24-2-1
1000-24-1-1
1000-24-2-1
1000-36-2-1
3000-24-2-0.3
6000-36-2-0.1
30000-24-2-0.1
AEMC
CATALOG
NUMBER
2115.82
2110.83 0.333mA/Aac 1 to 2400A 2400a
2110.90
2126.81
2112.88
2112.39 1mV/Aac 5 to 1000A 1000A
2112.98
2113.00
2114.87
2113.21
2113.33
PROBE
OUTPUT
100mV/A
10mV/Aac
10mV/Aac
1mV/Aac
0.1mV/Aac
100mV/A
10mV/Aac
100mV/A
10mV/Aac
ac
10mV
1mV/Aac
ac
10mV
1mV/Aac
3.3mV/A
0.3mV/Aac
1mV/A
0.1mV/Aac
1mV/A
0.1mV/Aac
ac
ac
ac
ac
ac
ac
PROBE
RANGE
0.1 to 24Aac
0.5 to 240Aac
1 to 30Aac
1 to 300Aac
1 to 3000Aac
30Aac
300Aac
5 to 30A
5 to 300A
5 to 100A
5 to 1000A
5 to 100A
5 to 1000A
5 to 300A
5 to 3000A
5 to 600A
5 to 6000A
5 to 3000A
5 to 30,000A
MAX RANGE
FOR SLII
10Aac
100Aac
30Aac
300Aac
3000Aac
10Aac
100Aac
10A
100A
100A
1000A
100A
1000A
300A
3000A
600A
6000A
1000A
10000A
CABLE
DIAMETER
0.78"
(19.8mm)
2.52"
(64mm)
2.52"
(64mm)
1.77"
(44.96mm)
8"
(203.2mm)
8"
(203.2mm)
8"
(203.2mm)
11"
(279.4mm)
8"
(203.2mm)
11"
(279.4mm)
8"
(203.2mm)
BUS BAR
SIZE
N/A Lead w/BNC
1.97 x 5.31"
(50 x 134.87mm)
1.97 x 5.31"
(50 x 134.87mm)
2.25 x 0.75"
(57.15 x 19.05mm)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
OUTPUT
CONNECTION
Lead L111 —
Lead w/BNC
Sensor w/BNC
Sensor
w/Banana Plugs
Sensor
w/Banana Plugs
Sensor
w/Banana Plugs
Sensor
w/Banana Plugs
Sensor
w/Banana Plugs
Sensor
w/Banana Plugs
Sensor
w/Banana Plugs
USED WITH
LOGGER
MODEL
L101
L102
L562
L101
L102
L562
L101
L102
L562
L101
L102
L562
L101
L102
L562
L101
L102
L562
L101
L102
L562
L101
L102
L562
L101
L102
L562
L101
L102
L562
NOTES
—
—
—
Must use adapter
# 2118.46
Must use adapter
# 2118.46
Must use adapter
# 2118.46
Must use adapter
# 2118.46
Must use adapter
# 2118.46
Must use adapter
# 2118.46
Must use adapter
# 2118.46
MN01
MN02
MN03
MN93-BK
MN193-BK
MN251
MN255
www.aemc.com
2129.17 1mA/Aac 2 to 150A 150A
50mA to 100A
2129.20 1mA/Aac
2129.18 1mV/Aac 2 to 100Aac 100Aac
2140.32 5mV/Aac 2 to 240Aac 200Aac
ac
2140.36
2115.77 1mV/Aac 0.5 to 240A 240Aac
2115.81
200mV/A
10mV/Aac
100mV/A
10mV/Aac
ac
(1Ω)
50mA to 90A
(10Ω)
5 to 100Aac
0.1 to 24Aac
0.1 to 240Aac
100A
5A
100A
10Aac
100Aac
0.39"
(9.9mm)
ac
0.39"
(9.9mm)
0.47"
(11.94mm)
0.8"
(20.32mm)
0.8"
(20.32mm)
0.78"
(19.81mm)
0.78"
(19.81mm)
N/A Lead L111 —
N/A Lead L111 —
N/A
N/A Proprietary
N/A Proprietary
N/A
N/A
Lead
w/Banana Plug
Lead
w/Banana Plug
Lead
w/Banana Plug
L101
L102
L562
L104
L564
L104
L564
L101
L102
L562
L101
L102
L562
Must use adapter
# 2118.46
Must use adapter
# 2118.46
Must use adapter
# 2118.46
—
—
Technical Assistance (800) 343-1391
Loading...