AEMC DL-1080, DL-1081 Data sheet
Special
product
features
▼
R
E
S
V
I
A
N
U
D
C
T
I
U
N
P
M
M
A
R
A
G
O
R
P
D
I
G
I
I
T
L
A
R
N
E
E
H
T
E
R
S
4
8
5
C
A
P
O
M
DATA LOGGERS
8 to 16 Channel Logger
L
Models DL-1080 & DL-1081
S
Versatile, powerful and cost
B
L
E
effective data loggers handling
O
/
analog, digital and other
types of variables with high
T
resolution and speed
E
L
B
I
T
SPECIFICATIONS
MODELS DL-1080 & DL-1081
ELECTRICAL
Input Type Measuring Range: Accuracy:
Linear 0 to 20mA
Linear 4 to 20mA
Linear 0 to 20mV
Linear 0 to 50mV
Linear 0 to 60mV
Linear -20 to 20mV
Linear 0 to 5V
Linear 0 to 10V
Digital Inputs
Internal Memory
Excitation Current
Maximum Pt100/Pt1000
Compensated Cable
Resistance
Maximum Input Voltage
Input Current @ 30Vdc
(typical)
Digital Outputs
Storage Rate
Maximum Channel Logged
Supported Modbus
Commands
Power Supply
ENVIRONMENTAL
Operating Temperature
Relative Humidity
Altitude
Protection
F.R. = Full Range
*The full scale refers to the input of the sensor signal and not the range of configured indication.
J
-184º to 1832ºF (-120 to 1000ºC)
K
-202º to 2501.6ºF (-130 to 1372ºC)
T
-202º to 752ºF (-130 to 400ºC)
E
-202º to 1436ºF (-130 a 780ºC)
N
-202º to 2372ºF (-130 to 1300ºC)
R
68º to 3214.4ºF (20 to 1768ºC)
S
68º to 3214.4ºF (20 to 1768ºC)
B
Pt100
Pt1000
212º to 3308°F (100 to 1820ºC)
-328º to 1562ºF (-200 to 850ºC)
-328º to 1562ºF (-200 to 850ºC)
User Programmable ± 0.15% (F.R.)*
Maximum relay current: 3A @ 250Vac; 3A @ 30Vdc
100 to 240V
For temperatures higher than 85°F (30°C),
Logic level “0”: from 0 to 0.8V
Logic level “1”: from 3 to 30Vdc
2MB
Pt100s: 360µA; ; Pt1000s: 320µA
40Ω
30Vdc
3mA
Maximum output voltage: 30V
Maximum output current: 200mA
from 1ms to 24 hours
100
Read Coil Status (01h)
Read Holding Registers (03h)
Write Single Coil (05h)
Write Single Register (06h)
Write Multiple Registers (0Fh)
ac, 50/60Hz. 20VA (max)
32° to 122°F (0 to 50°C)
80% up to 85°F (30°C)
decrease 3% per °C
< 6500 ft (2000m)
IP20
± 0.2% (F.R.) ± 1ºC
± 0.2% (F.R.) ± 3ºC
± 0.15% (F.R.)
dc
dc
Inputs rated CAT II
IP
20
Rated
FEATURES
• 8 universal analog input channels
• 8 digital I/Os (individually configured as
inputs or outputs)
• 2 relay outputs (NO, NC and common)
• RS485 interface
(Modbus master or slave)
• 24Vdc output to power up to eight
4 to 20mA transmitters
• Ethernet interface for LAN and
internet use
• USB-device interface for configuring,
monitoring and download
• USB-host interface for logged data
retrieval through a USB flash drive
• Up to 32 configurable alarms
• Up to 128 virtual channels
• Detachable display (optional)
• Up to 100 channels can be logged at a
configurable rate
• Data downloading through the
configuration software or through the
freely distributed download DLL
• 4 input channel types: analog, digital,
remoted and virtual
• 16GB SD card interface
www.aemc.com
Technical Assistance (800) 343-1391
Model DL-1081
Color Functional Displays
"FAVORITES" Screen
Shows a six-position grid where you can
assign a channel to be displayed real-time
in each position.
"CONFIGURATION" Screen
Data logger and display parameters can
be changed and viewed on this screen.
"CHART" Screen Software Screens
Displays a plot of the favorite
channels values.
"ALARMS" Screen
A 32-position grid where each numbered
position is related to its equivalent alarm or
event. When an alarm is active, its number
will be displayed in red on this screen.
CATALOG NO. DESCRIPTION
2134.61 Data Logger Model DL-1080 (8 Analog to 8 Digital Channel, no LCD)
2134.62 Data Logger Model DL-1081 (8 Analog to 8 Digital Channel, LCD)
Technical Assistance (800) 343-1391
PRODUCT INCLUDES
DL-1080 & DL-1081 software
USB stick supplied with software,
drivers and user manual
www.aemc.com
Loading...