AEMC CM605 Data sheet
Special
product
features
▼
C
A
/
D
A
C
m
1
C
U
R
R
R
E
N
T
O
S
R
E
CLAMP-ON METERS
100Aac/dc Low Current
N
O
I
T
Model CM605
U
L
&
D
C
A
A
N
A
L
O
U
G
O
For general industrial monitoring
C
and troubleshooting
T
U
P
T
SPECIFICATIONS
T
A
I
L
V
E
E
R
F
U
N
O
I
C
T
MODEL CM605
ELECTRICAL
N
AC Current
Measurement Ranges 2 Ranges: 10A, 100A
Accuracy & Resolution
Frequency Range 2 Ranges: 50 to 500Hz
DC Current
(positive only)
Measurement Ranges 2 Ranges: 10A, 100A
Accuracy & Resolution
AC Volts
Measurement Ranges 600Vrms
Accuracy & Resolution 1.5% of Reading ± 5cts - 100mV Resolution
Frequency 40 to 500Hz
Input Impedance 10MΩ, < 50pF
DC Volts
(positive only)*
Measurement Ranges
Accuracy & Resolution 1.0% of Reading ± 2cts - 100mV Resolution
Input Impedance 10MΩ
Resistance (Ohms)
Measurement Ranges 10kΩ (9999Ω)
Accuracy & Resolution 1.0% of Reading ± 3cts - 1Ω Resolution
Test Voltage < 3.0V
Continuity
Measurement Ranges Buzzer < 100Ω ± 25Ω
Resolution 1Ω
Test Voltage < 3.0V
Analog Output
Output 10mV/A
Frequency 0 to 20kHz @ ± 3db
Output Impedance 3kΩ, < 50pF
Other Functions
Adc Zero &
Relative Function
One touch push button (∆ZERO Button) to Zero A
Relative function also used in the other ranges to compare two measurements.
HOLD Function Holds A & V measurements when pressed (HOLD button)
PEAK Function Captures PEAK (1ms) V or A measurement when activated (PEAK Button)
Auto-Ranging “AUTO” displayed on LCD
Over Range “OL” displayed on LCD for all measurements
Auto Power OFF Auto Power OFF after approx 10 minute with Over-Ride
Low Battery Low Battery indication on LCD
MECHANICAL
Max. Cable Diameter
Max. Jaw Opening
Power Source
Dimensions & Weight
Safety Standards
*For negative measurement, add 2cts to the accuracy
IEC/EN 61010-1 and 2-032 – 600V CAT II and 300V CAT III – Pollution Degree 2
10A: 2.0% of Reading ± 10cts - 1mA Resolution
80A: 2.0% of Reading ± 10cts - 10mA Resolution
> 80A: 3.5% of Reading ± 10cts - 10mA Resolution
10A: 2.5% of Reading ± 10cts - 1mA Resolution
80A: 2.5% of Reading ± 10cts - 10mA Resolution
> 80A: 4.5% of Reading ± 10cts - 10mA Resolution
Two 1.5V AAA (LR03) batteries (included)
7.95 x 2.76 x 1.33" (202 x 70 x 34mm) – 6.5 oz (180g)
Class 2 – Double or reinforced insulation, CE mark
600V
dc
dc
ac & Adc through front banana jacks
dc, or other readings.
Ø 0.45" (12mm)
Ø 0.60" (15mm)
FEATURES
• 10,000-count LCD display -
excellent resolution
• 100Aac/dc Ammeter with low
10A range (1mA resolution)
• Tapered jaws for crowded
wiring areas
Jaw opening:
Ø 0.60"- 15mm
Cable diameter:
Ø 0.45"- 12mm
• 600V
• Analog output in A
• Auto-ranging & A
• Data HOLD & PEAK
• Relative function to compare
• Ohm range & continuity test
• Auto Power OFF and low
• IEC/EN 61010 safety rated
• 600Vrms overload protection
ac/dc voltmeter
ac/dc to
data loggers, etc
dc zero
push-button
functions
two measurements
with beeper
battery indicator
& CE mark
PRODUCT INCLUDES
Soft carrying case, test leads,
two 1.5V AAA batteries and user manual.
CATALOG NO. DESCRIPTION
7000.02 Clamp-On Meter Model CM605 (100Aac/dc, Low Current)
www.aemc.com
Technical Assistance (800) 343-1391
Loading...