AEMC CA1110 Specifications
Special
product
features
▼
I
S
N
O
E
C
C
O
R
T
R
C
E
A
P
M
F
U
N
O
I
C
T
T
O
O
H
P
E
I
C
R
E
S
N
P
O
ENVIRONMENTAL TESTERS
Lightmeter Data Logger
Model 1110
D
E
Features optical sensors that are
designed to match the response of
the human eye
N
SPECIFICATIONS
P
T
I
MODELS 1110
C
Measurement Range
E
S
Accuracy
Accuracy with
compensation
Display Resolution
Recording
Other Functions
Sampling Rate
MAP mode
Memory
Communication
Power Source
Battery Life
Dimensions
Weight (with battery)
Case
Operating temperature
Storage temperature
Relative Humidity
Ingress Protection (IP)
EMC
Safety Compliance
Warranty
.01 lx to 200,000lx 0.01 fc to 18,580 fc
±3% of R on incandescent sources
±6% of R on LEDs (3,000K to 6,000K)
±9% of R on flourescent sources
LED mode: ±4% of R (at 4,000K)
Flou mode: ±4% of R (type F11, 4,000K)
0.1 lx (0.1 lx to 999.9 lx)
1 lx (1,000 lx to 9,999 lx)
10 lx (10,000 lx to 99.99 klx)
0.01 fc (0.01 fc to 99.99 fc)
0.1 fc (100.0 fc to 999.9 fc)
1 fc (1,000 fc to 9,999 fc)
100 lx beyond
Manual start/stop on the product
Short press for MEM: spot recording/long press for REC at the
defined default rate
Programed recording: start date, recording interval, and end date
defined using DataView® software
MIN-AVG-MAX-HOLD
Programmable from 1s, 2s, 5s, 10s, 20s, 30s, 2min, 5min, 10min,
15min, 30min, and 1hr
The MAP mode can be used to map the lighting on the surface of a
room. In this case the measurements are saved in the same file
1,000,000 measurements on each channel (4MB). Recorded data is
stored in non-volatile memory and will be retained even if battery is
low or removed.
USB 2.0 and Bluetooth
3x1.5V AA (LR6) alkaline batteries (included) or USB port (micro-USB
adaptor offered as an accessory)
500hrs, 3yrs with 15min intervals
Case: 5.9 x 2.84 x 1.28" (150 x 72 x 32mm)
Sensor: 2.64 x 2.52 x 1.38" (67 x 64 x 35mm)
12.2 oz (345g) with batteries
Polycarbonate
14° to 140°F (-10° to 60°C)
-4° to 140°F (-20° to 60°C)
Up to 90%
IP50 with USB connector closed and protective cap on sensor
EN 61326-1
IEC 61010-1
2 years
10 fc beyond
IP
50
Rated
FEATURES
• User selectable light source, natural,
LED or fluorescent
• Spectral error compensation for LED
and fluorescent lighting
• Removable light sensor with
expandable cord up to 48”
• Map mode profiles the illuminance
map of the area or room by storing
multiple measurements
• Min, Max, and Average measurements
stored
• Hold function freezes the display
• Spot or continuous recording of up
to 1,000,000 measurements stored in
8MB flash memory
• Blue luminescent backlit display
• User selectable Foot Candle or Lux
units
• USB and Bluetooth communication
• Magnetic mount
• Battery or USB powered
• DataView® graphing and analysis
software included
Measure and record multiple measurements
to create an illuminance map of the room or
area of interest
CATALOG NO. DESCRIPTION
2121.71 Lightmeter Data Logger Model 1110
www.aemc.com
Technical Assistance (800) 343-1391
Loading...