AEMC AEMC OX 9104 IV 100MHz Brochure

Oscilloscope

OX 9000 SERIES

4-in-1 Instrument

Oscilloscope

Multimeter

Analyzer

99 Washington Street
Melrose, MA 02176

Phone [phone]
Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

isolated channels

Logger

with the recorded files directly
viewable on screen

Safety

• All channels isolated from one another
and from the earth, 600V CAT III

Ergonomic

• Modern, high tech design which is
simple, compact and practical

Optimization

• of all tools; communication, storage
and operation

Our products are backed by over 125 years of experience in test and measurement
equipment, and encompass the latest international standards for quality and safety.

OSCILLOSCOPE OX 9000 SERIES

ERGONOMICS

Designed to simplify use with one button access to most functions

In a housing tailor-made to be as compact as possible,
the mechanical design makes it possible to integrate
the hardware components in a small size with the
keypad benefits from new technology developed in
the automotive industry.

CHANNEL AND PARAMETER IDENTIFICATION

Each channel and related parameters are identified with identical
color against a black background for simpler, quicker viewing.

EASY ACCESS VIA TOUCH SCREEN

Intuitive icons are provided to facilitate their use, even with gloves on.

ADJUSTABLE STRAP

This helps to optimize operation of the oscilloscope in your hand
or on your shoulder when working in the field.

A stand is also available to vary the orientation of the oscilloscope
when it is placed on a bench. The oscilloscope can be safely left
unattended using the Kensington locking system.

IP

54

ETHERNET

NEW KEYPAD DESIGN FOR OPTIMUM USER COMFORT

Configuration and measurement displays are simple to access from
the front panel in one of these 5 specific areas: Utilities (brightness,
full screen, screenshot), Measurements, Vertical, Horizontal, Trigger.

LINE POWER OR LI-ION BATTERY

Port on left side.

PRODUCT INCLUDES

Scope in carrying case with shoulder strap, set of two 5 ft color-coded leads, alligator clips
and test probes, 10 ft USB cable, µSD memory card, 1-PROBIX Banana Plug Adapter, set
of 5 styli pens, LI-ION 5.8 Ah battery pack, PA40W-2 power adapter with 110V power cord.
Additional accessories may be model dependent.

OSCILLOSCOPE OX 9000 SERIES

APPLICATIONS

Ideal for electronic and industrial maintenance

IP54

Housing protected against dust and water spray.

7" WVGA WIDE COLOR TFT TOUCH SCREEN

Makes it easy to view and read the measurements clearly.
It also provides a screen resolution of 800 x 480 dpi with manual
or automatic brightness.

TOUCH-SCREEN STYLUS STORAGE

Among the essential tools available, the sylus is equipped with a
hook for the addition of a cord to make it captive, as required. One
end is slightly flattened to prevent rolling when placed on a table
or bench.

AUTOSET BUTTON

Quickly and effortlessly adjusts the horizontal and vertical;
sensitivity and scales to provide the best resolution.

DIRECT SETTING AND SET-UP BUTTONS

COMMUNICATION INTERFACES

Electronic maintenance

The OX 9304 model is ideal for electronics with its
300 MHz bandwidth, 4 x 600V CAT III isolated channels,
advanced trigger functions, integrated FFT function,
complex mathematical calculations on the curves, automatic
measurements on 4 channels and the built-in WEB server.

Industrial maintenance

The OX 9304’s large 7-inch screen, 300 MHz bandwidth,
4 x 600V CAT III isolated channels and Harmonic
Analyzer and Multimeter modes make it ideal for
industrial maintenance applications.

These are isolated from one another and from the measurement
channels. A dedicated compartment on the right side protected
by a flexible cover contains all the different communication
interface ports:

• USB host for communication with a PC

• wired RJ45 or WiFi for communication with a PC or

printing via a network printer

• µSD card for data storage with quick transfer and for

upgrading of the instrument's firmware

DIRECT ACCESS ZOOM BUTTON

Channels are isolated.

CATALOG NO. DESCRIPTION

2150.31 ....................................................................................................................................Hand-Held Oscilloscope Model OX 9062 IV 60MHz

2150.32 ..................................................................................................................................Hand-Held Oscilloscope Model OX 9102 IV 100MHz

2150.33 ..................................................................................................................................Hand-Held Oscilloscope Model OX 9104 IV 100MHz

2150.34 ..................................................................................................................................Hand-Held Oscilloscope Model OX 9304 IV 300MHz

OSCILLOSCOPE OX 9000 SERIES

ACCESSORIES

Accessories automatically recognized
when connected to the oscilloscope

The plug and play accessories included are
automatically recognized when connected to the
oscilloscope. They provide quick and easy
implementation with total user safety. Additionally,
accessories equipped with BNC connectors or
standard banana plugs can also be connected when
using the supplied adapter.

Interchangeable ID Markers can be used on the
accessories plugged into a given channel to identify them
with the trace color displayed on the screen.

Additionally the 10:1 probe accessory is equipped with
3 adjustable buttons to optimize its measurement capabilities.

Identication and Safety Management

Once one of the provided standard accessories has been
plugged in, it is automatically identified and its
characteristics and calibration references are retrieved by
the OX9000 Series Oscilloscope. All accessories are
directly powered by the oscilloscope.

Channel Conguration and Sensor Management

Sensor coefficients scales and units of measure are managed
automatically, as is channel configuration. Control buttons on
the probes can be used to modify the settings of the channels
to which they are connected. They also offer functions
accessible on the oscilloscope's front panel.

PROBE FUNCTIONS

voltage measurements

• by probe with different
bandwidths and attenuation

• by BNC or banana jack connection

current measurements

• by AC or AC/DC current clamp

• directly through banana
jack connections

temperature measurements

• using a K thermocouple sensor

• using a PT100 RTD sensor

Accessories & Replacements

Cat #2124.73 - PROBIX PRHX1 10:1 Probe, 250MHz 600V CAT III
Cat #2124.77 - PROBIX Current Probe, 20mA-20A 1MHz-3dB
Cat #5000.17 - Set of 5 styli pens

OSCILLOSCOPE OX 9000 SERIES

COMMUNICATION

For added equipment and operator safety all communication from the

instrument is totally isolated from the measurement process

Choice of communication interfaces―you can choose
the type of communicaton to fit your requirements.
Several communication choices are built into the OX9000
Series oscilloscope.

• Wired Ethernet LAN network with integrated DHCP
server for easy connection to your network

• WiFi® radio link to communicate with a PC, tablet or
smartphone using the dedicated interfaces

• USB for interfacing with the PC; record, recall or
load configurations

• µSD with >8 GB, default storage giving priority over
the 1 GB internal memory

File Management

Any of the signal traces can be displayed instantaneously as
the reference by pressing a single button which will obtain a
comparison an immediate measurements of the deviation of
ongoing measurements.

Backups are available in various formats for direct export into
a standard application such as Windows base spreadsheets
or word processors.

It is easy to take screenshots directly from the front panel and
save them in a .PNG format, print documents on a network
printer and transfer or delete files in the file manager.

Electrical Troubleshooting

Education

Storage capability

Type of le

for each mode

setup (cfg)

traces (trc)

math (fct)

Oscilloscope mode

Multimeter mode

Logger mode

Harmonics mode

   
 
 
  

Data Processing

• Use the oscilloscope screen to recall screenshots and
stored traces for direct review on screen

• On your PC, use the ScopeNet application in your web
browser with either the USB or Ethernet connection for
remote control and programming with SCPI commands

meas (txt)

screen shot (png)

In the laboratory

OSCILLOSCOPE OX 9000 SERIES

4 MODES: Oscilloscope, Multimeter, Analyzer, Recorder

Improved functions and performance levels of the OX9000 Series

• wider bandwidth up to 300 MHz

• new triggering and recording options

• increased storage capacity, and more!

OSCILLOSCOPE:

• 12 bit resolution

• 2.5 GS/sec

Trigger Functions

An oscilloscope with complex trigger functions
records what is necessary, while capturing all the faults
The OX9000 models offer advanced triggers which
complement the main edge trigger options: pulse width,
counting and delay.

• The Delay mode enables you to observe any
event with maximum resolution, even if it occurs
a long time after effective triggering, or on two
different channels.

• The Counting mode enables you to count the
events before triggering, so that you can check the
content of digital frames. For example, the trigger
can be linked to a second “auxiliary” signal which
is different from the “main” signal.

Automatic Measurements

Comprehensive automatic measurements are displayed
with cursors for precise analysis. The automatic
measurements window displays all 20 parameters at
the touch of a button for 4 channels. Two horizontal
and vertical cursors can be used to view the section
of the signal where the first automatic measurement
was performed.

The Math Functions

In oscilloscope mode, the MATH functions (1, 2, 3
and 4) allow you to define a mathematical function
for each of the traces, along with vertical scaling and
labeling of the actual physical unit.

The mathematical editor is capable of displaying 4
calculated traces on which all the automatic or cursor
measurements remain available. This means it is
possible to examine the waveforms, such as the power
(V x I), and perform all the associated measurements.

A large number of operators are available, including +,

-, x and / , as well as more complex operators such as
sine, cosine, exponential, logarithm, square root, etc.
opening the way for specific applications.

Real-time Fast Fourier Transform (FFT) for frequency
decomposition of your signals on 4 channels

The FFT is used to calculate, from 2500 points
upwards, the discrete representation of a signal in the
frequency domain from its representation in the time
domain. It is often particularly useful for arriving at an
effective diagnosis during qualitative analysis of
the signals:

A specific measurement area can then be selected
by framing it with manual cursors for more accurate,
reliable results.

Direct comparison of two traces can be performed
by checking the “reference memory deviation” box,
so that these 20 signal parameters are displayed in
terms of deviations.

PRACTICAL!

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

VIEW ALL 4 CHANNELS
SIMULTANEOUSLY

waveform + FFT
waveform + XY
waveform + zoom

TestEquipmentDepot.com

• measurement of the individual harmonics or
distortion of a signal

• analysis of a pulse response

• search for the source of noise in the logic circuits

Several weighting windows are available, as well
as 2 representation modes: linear or logarithmic
(scale in dB). The 2 cursors can then be used for
precise measurements of the frequency lines, the
levels and the attenuations, taking advantage of
the 80 dB dynamic range allowed by the 12-bit /

2.5 GS/s conversion.

The autoset button makes it easier to obtain an
optimum spectral representation to which a graphical
zoom can be applied to analyze all the details of
the spectrum.

OSCILLOSCOPE OX 9000 SERIES

4 MODES: Oscilloscope, Multimeter, Analyzer, Recorder

The four modes are directly accessed at the press of a button or touch

screen icon providing instant access the mode you need

Harmonic Analysis

Harmonic analysis is performed on all 4 channels up to
the 63rd order to comply with the requirements of the EN
50160 standard (THD on harmonics up to the 50th), with a
fundamental frequency between 40 and 450 Hz.

It is possible to preselect the frequency of the fundamental
for the standards (50 Hz, 60 Hz and 400 Hz).

This function helps to improve analytical performance and,
above all, measurement when the level of a harmonic order
is greater than the fundamental.

It is possible to view the harmonic analyses of two or four
channels simultaneously: RMS level, harmonic distortion,
harmonic frequency, phase of the harmonic in relation to
the fundamental.

Multimeter

By simply selecting the dedicated icons, you can gain access
to the multimeter mode without changing the measurement
input channels. The OX9000 models offer an 8,000-count
TRMS digital multimeter with two or four channels which can
perform the following measurements:

Harmonics

4 Simultaneous Channels

• amplitude (DC or AC voltage and current, power,
temperature, etc.)

• resistance, continuity, capacitance

• component diode tests

Temperature is measured using the Pt 100 and Pt 1000
sensors or K thermocouples via the dedicated PROBIX
sensors. The power measurements are proposed as follows
with choice of the configuration:

• single-phase power

• three-phase power on balanced network without neutral

• three-phase power on balanced network with neutral

• 3-wire three-phase power (2-wattmeters method)

Measurement between H and V cursors:
T1, T2, Dt, 1/Dt, V1, V2, dV, Ph

Recorder/logger

This is the mode for recording the trends in Multimeter mode. A genuine fast digital logger is provided inside the
instrument to monitor the variations of physical or mechanical phenomena over time. It offers acquisition intervals
as short as 40µs between 2 measurements and recording can cover any period from 2 seconds to one month.

Technical Assistance [phone] www.aemc.com 7

TECHNICAL SPECIFICATIONS

HUMAN-MACHINE INTERFACE

Type of display 7" WVGA color TFT LCD touch screen, 800x480 – LED backlighting (adjustable standby mode)
Different display mode 2,500 real acquisition points on screen - Vectors with interpolation
Display of curves on screen 4 curves + 4 references – Split Screen & Full Screen modes
Screen commands Touch screen – ANDROID-type icons and graphical commands – customizable channel colors
Choice of language 15 complete languages, menus & online help

OSCILLOSCOPE MODE

Vertical deection

Bandwidth

Number of channels 2 isolated channels 4 isolated channels

Input impedance 1 MΩ ± 0.5% , approx. 12 pF

Maximum input voltage 600 V / CAT III (1,000V per Probix) – from 50 to 400 Hz – Probix safety connectors

Vertical sensitivity 16 ranges from 2.5 mV to 200 V/div and up to 156 µV/div in vertical zoom mode (12-bit converter) – Accuracy ± 2%

Vertical zoom "One Click Winzoom" mode (12-bit converter and direct graphical zoom on screen) – x 16 max.

Probe factor (non-Probix) 1 / 10 / 100 / 1,000 or any scaling – denition of measurement unit

Horizontal deection

Sweep speed 35 ranges from 1 ns/div to 200 s/div., accuracy ± [50 ppm + 500 ps] – Roll mode from 100 ms to 200 s/div

Horizontal zoom "One Click Winzoom" system (direct graphical zoom on screen) x 1 to x 5 or x 100 – storage 100 kpts/channel

Triggering

Mode On all the channels: automatic, triggered, one-shot, auto level 50%

Type Edge, pulse width (16 ns-20 s), delay (48 ns to 20 s), counting (3 to 16,384 events) Continuous adjustment of Trigger position

Coupling AC, DC GND, HFR, LFR, noise – Level and Hold-Off adjustable from 64 ns to 15 s

Sensitivity ≤ 1.2 division p-p up to 300 MHz

Digital storage

Maximum sampling rate 2.5 GS/s in one-shot mode on each channel (100 GS/s max. in ETS mode)

Vertical resolution 12 bits (vertical resolution 0.025 %)

Memory depth 100 kpts per channel and le viewer in the manager

User storage
File management

GLITCH mode Duration ≤ 2 ns – 500,000 Min/Max pairs

Display modes Envelope, vector, accumulation-, averaging (factors 2 to 64) – XY (vector) and Y(f)=FFT

Other functions

AUTOSET Complete in under 5 s, with recognition of the channels – Frequency > 30 Hz

FFT analyzer & MATH functions 2,500-point FFT (Lin or Log) with measurement cursors – Functions + , - , x , / and mathematical function editor

Cursors 2 or 3 cursors: simultaneous V and T with AUTO measurement: T1, T2, Dt, 1/Dt, dBV, Ph

Automatic measurements Simultaneously with waveform, 20 automatic measurements per channel and on the 4 channels simultaneously with scroll

MULTIMETER MODE

General specications 2 or 4 channels – 8,000 cts min/max/frequency/relative – TRMS – Time/date-stamped graphical recording in logger mode

AC, DC and AC + DC voltages 600 mV to 600 VRMS, 800 mV to 800 VDC – VDC accuracy +/- (0.5 % + 25 D) – 200 kHz bandwidth

Resistance 80 Ω to 32 MΩ – accuracy 0.5%R+ 25D – Quick continuity test < 10 ms

Other measurements Temperature (HX0035 = KTC, HX0036 = Pt100) / Capacitance 5nF to 5mF / Frequency 200 kHz / Diode test 3.3 V

Single and three-phase power Active, Reactive and Apparent power values plus Power Factor simultaneously with the U & I measurements

HARMONIC ANALYSER MODE

Multi-channel analysis 2 or 4 (depending on model), 63 orders, fundamental frequency 40 to 450 Hz in auto or manual mode

Simultaneous measurements Total Vrms, THD and selected order (% fundamental, phase, frequency, Vrms)

LOGGER MODE

Acquisition Duration: 20,000 s – Interval: 0.2 s – Files: 100,000 measurements

GENERAL SPECIFICATIONS

Conguration memories Not limited according to device - variable le sizes

Printing Network printing via Ethernet/Wi in .png format

PC communication – software link Ethernet (100 baseT), WiFi-USB (device, 12 Mbs) – "ScopeNet" application software for PC

Software

Mains power supply

Safety / EMC Safety as per IEC 61010-2-30, 2010 – 600V CAT III / 1000V CAT II – EMC as per EN61326-1, 2010

Mechanical specications 292.5 x 210.6 x 66.2 mm – 2.1 kg with batteries – IP54 protection

OX 9062 OX 9102 OX 9104 OX 9304

60 MHz 100 MHz 100 MHz 300 MHz

15 MHz, 1.5 MHz or 5 kHz bandwidth limiter

Internal = 1 GB to store the les: trace, text, conguration, math functions, System memory: .pdf print les, .png image les

+ high-capacity removable µSD-Card: SD 2 GB, SDHC 4-32 GB and SDXC > 32 GB

PC: Ethernet and USB, ScopeNet (remote control, data recovery, cursors and automatic measurements)

Android tablet – ScopeAdmin Fleet Administration utility

Li-Ion rechargeable battery (6,900mAH-40 Wh) – Battery life of up to 8 hrs – Adjustable standby mode

Adapter / 2-hour fast charger, universal 98-264 V / 50/60 Hz)

Call the AEMC® Instruments Technical Assistance Hotline for immediate consultation with an applications engineer: [phone]

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments • 200 Foxborough Blvd. • Foxborough, MA 02035 USA • (800 ) 343-1391 • (508 ) 698-2115 • Fax [phone]

Expor t Department: [phone] (x520) • Fax [phone] • E-mail: [e-mail] • E-mail: sales @aemc.com

950.BR-OX9000Series_0519 Printed in the USA