AEMC 1040 Data sheet

Digital/Analog Megohmmeter Models 1030, 1040 & 1045 (pdf) Rev. 03 01/04

Technical Assistance [phone] www.aemc.com 1 of 6

The AEMC®Digital/Analog Megohm­meters are innovative in the design of
multiple voltage insulation, resistance
and continuity meters.

They incorporate the latest measure­ment technology and are specifically
designed to the most recent
international insulation and continuity
testing standards as well as
EN 61010-1, 300V, Cat. II, IEC 61557
environments.

Their rugged construction is unique
in megohmmeters. Aslip-proof and
shock-proof holster is directly
over-molded on the high impact
polycarbonate case. The overall
ergonomic shape fits naturally into

the hand and the two back case
ridges facilitate a firm grip on the
meter. The case is rated IP44
(Index of Protection).

Digital and analog features are
enhanced by a third digital display,
which indicates alarm set point or
elapsed test time.

These megohmmeters offer many
features, such as: automatic detection
of potentially dangerous voltages
when connecting to a sample on the
MΩ ranges (with blocking of any
insulation test if V >25V), protection
against external voltage surges,
enhanced operator safety through
automatic discharge of the tested

sample, automatic shutdown to
optimize the battery life and large
LCD display with easy-to-read
symbols and indicators. And,
depending on the model: bright blue
electroluminescent backlighting, alarm
programming for quick tests, lead
resistance compensation for accurate
continuity

measurements, and display

of the

duration of the measurement

for easy DAR and PI measurements.

Digital/Analog Megohmmeter
Models 1030, 1040 & 1045

Digital/Analog Megohmmeter Models 1030, 1040 & 1045 (pdf) Rev. 03 01/04

Technical Assistance [phone] www.aemc.com 2 of 6

Model 1030

Models 1040 & 1045

Input Connections

Features

• True Megohmmeter

®

• Test voltage combinations of 250V, 500V and 1000V

• Insulation measurements to 2000MΩ (2GΩ)

• Automatic test inhibition (if live sample >25V)

• Automatic discharge for operator safety

• Multi-line 4000-count backlit digital display with analog bargraph

• Resistance measurements to 400kΩ

• Continuity with 200mA test current

• Timer function for easy DAR and PI (Model 1045)

• Over-molded slip-proof holster for rugged field use

• EN 61010-1-1, 300V Cat. II, IEC 61557 and CE Mark

• Includes a soft carrying case and test leads

Applications

• Motor insulation resistance measurements

• Continuity checks and low resistance measurement

• Test/industrial commercial wiring and motor control centers

• Test motors (AC and DC) and transformers

• Dielectric Absorption Ratio and Polarization Index (PI)

measurements

• Cable insulation testing

Remote probe used with Model 1045 to initiate a test at the motor.Target light
provides good visibility of test area.

Easy-to-read digital/analog display (backlight on)