Upright Vacuum Clean er
Owner’s Guide
Household Type
Z2950 Series
2 - 4
4
IMPORTANT INFORMATION
GUARANTEE
5
5
6
7
7
8
8
QUICK REFERENCE
HOW TO ASSEMBLE
HOW TO USE
ROUTINE MAINTENANCE
Dust Cup
Top Filter
Bottom Filter
PERIODIC MAINTENANCE
Brushroll
IMPORTANT
For any advice
on your cleaner and
to order fi lters and
accessories,
please telephone the
Electrolux Helpline on
8 - 9
10
11
Brushroll Belt
PROBLEM SOLVING
Clear Hose
Guide
08706 055055
FILTER REPLACEMENT CODE: EF87a and EF82
www.electrolux.co.uk
IMPORTANT INFORMATION
When using an electrical appliance, basic precautions should always be followed, in clud ing the following:
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
To reduce the risk of fi re, electric shock, or injury:
• Do not use outdoors or on wet surfaces.
• Do not leave vacuum cleaner whilst plugged in. Turn off the switch and unplug the electrical cord when not in
use and before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, dam aged,
left outdoors, or dropped into water, return it to a service centre before using.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
• Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything
that may reduce airfl ow.
• This vacuum cleaner creates suction and contains a revolving brushroll. Keep hair, loose clothing, fi ngers, and all parts
of body away from openings and moving parts.
• Do not place cleaner on furniture or stairs as the brushroll may cause damage. Place cleaner on fl oor with the handle in
storage position while using attachments.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without the dust cup or fi lter(s) in place.
• Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.
• Use extra care when cleaning on stairs.
• Do not use to pick up fl ammable or combustible liquids such as gasoline, or use in areas where they may be present.
• Store your cleaner indoors in a cool, dry area.
• Keep your work area well lighted.
• Unplug electrical appliances before vacuuming them.
PLEASE SAVE THESE INSTRUCTIONS
WARNING
The brush in the cleaning head rotates at high speed and can cause damage to the mains supply cable if the cleaner passes
over it during cleaning operations.
Care should be taken to ensure that this does not happen. If the cleaning head has accidentally passed over the mains supply cable
the following action should be taken:
1. Switch off and remove the plug from the socket outlet.
2. Examine the mains supply cable for damage (only after removing the plug from the socket outlet).
3. If there is any sign of damage to the supply cable it MUST be renewed. The repair MUST be carried out by an Electrolux Service
Agent or a similar qualifi ed person.
4. NEVER use the machine with a damaged mains supply cable.
Proprietary carpet conditioning and air freshening ma te ri als
After using proprietary carpet conditioning powders, it is recommended that the fi lters be changed. Some of these preparations contain
sub stanc es which if left in the vacuum cleaner for extended periods could damage the plastic mouldings which form the structure of
the cleaner.
Many air fresheners, household deodorants, sprays and polishes contain a highly fl am ma ble gas propellant.
Because of this, it is particularly important that these products are used strictly in ac cord ance with the relevant manufacturer’s
instructions.
It is essential that none of the above products are sprayed directly into the vacuum cleaner or any of its fi lters, hose assembly, dustbag
chamber or dust cup.
Thermal Cut Off
This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner switches off, push the
switch pedal once and unplug the cleaner. Check the cleaner for a possible source of overheating such as a full dust cup, a blocked hose or
clogged fi lter. If these conditions are found, fi x them and wait at least 60 minutes before attempting to use the cleaner. After the 60 minute
period, plug the cleaner back in and push the on/off switch On (I). If the cleaner still does not run, please call Electrolux Customer Care.
2
BEFORE YOU START
CHECK THE VOLTAGE
Before connecting the cleaner to an electrical supply, ensure that the voltage shown on the rating plate located beneath the cleaner
is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.
CONNECTING TO YOUR ELEC TRIC I TY SUPPLY
Permanently connected to the clean er is a mains supply (2-core) cable fi tted with a non-rewirable plug incorporating a 13A fuse.
In the event of the fuse requiring replacement the fuse cover should be re moved using a small screw driv er. The old fuse MUST be
re placed by a 13A ASTA ap proved BS1362 fuse or a BSI approved fuse. The cover must be re placed before the plug is used again.
In the event of loss of the fuse cover, re place ments can be obtained from your Electrolux Retailers and must be of the same colour as
indicated by the col oured insert on the base of the plug.
If diffi culty is ex pe ri enced in ob tain ing a replacement, con tact Electrolux Customer Services on 08706 055055.
In no circumstances must the plug be used without a correct fuse cover fi tted.
If the plug that is fi tted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fi tted.
Remove the fuse from the cut off plug.
The cut off plug should then be dis posed of to prevent the hazard of shocks in case it should be plugged into a 13 amp socket in
another part of your home.
The wires in the mains cable of this appliance are coloured in ac cord ance with the following code: Blue: Neu tral. Brown: Live.
As the colours of the wires in the mains cable of this appliance may not correspond with the col oured markings iden ti fy ing the terminals
in your plug, proceed as follows:
The wire which is coloured blue must be con nect ed to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be con nect ed to the terminal which is marked with the letter L or coloured red.
If using a three-pin plug, do not make any con nec tion to the terminal marked with the letter E or by the earth symbol or col oured green
or green-and-yellow. This cleaner is dou ble in su lat ed and no earth con nec tion is nec es sary.
It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, consult a qualifi ed elec tri cian, as
Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of
the guarantee.
Fuse
13 Amp Fuse
Cover
13 Amp
Fuse
Blue
Brown
Cord
Clamp
The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city offi ce, your household waste disposal service or
the shop where you purchased the product.
3
IMPORTANT INFORMATION
Should you require service on your Electrolux cleaner, please telephone Electrolux Customer Services on 08706 055055. Before
requesting service, please check whether your problem is covered under Service Checklist (see below).
New fi lter pads, brushrollers and drive belts can be obtained from Electrolux Retailers. If diffi culty is experienced in obtaining
spares, please contact Electrolux on 08706 055055.
SERVICE CHECKLIST
SERVICE
• If your cleaner will not operate, check the plug connection, plug fuse and mains fuse.
• Never allow the dust cup to become so full that it impedes the airfl ow, thus reducing the cleaning effi ciency of the machine.
The character of household dust and its effect on the airfl ow through the machine may vary considerably. Fluffy dust allows
air to pass through readily whereas fi ne powdery dust or proprietary cleaning powders, pack tightly in the dust cup, offering
greater resistance to airfl ow and will reduce cleaning effi ciency if the cup becomes overloaded.
• Always store your cleaner and spare dust fi lters in a dry place.
• Renew the fi lter pads three or four times a year. This is essential to ensure continued high fi ltration of dust particles.
• Sucking up such items as stockings, clippings of cloth, sizeable pieces of paper, wrappings from cigarette packets or sweets
etc., may block the hose. Electrolux regrets that the clearing of blocked hoses cannot be regarded as service that can
be given free of charge, under the guarantee. Should a blockage occur, fi rst disconnect the cleaner from the electricity
supply, refer to section headed “Block ag es”. If these op er a tions are not suc cess ful, contact Electrolux on 08706 055055.
• Never pick up hot cinders or lighted cigarette ends.
• Make certain that your cleaner does not come into contact with water or any other liquid. It is not designed as a
wet pick up cleaner, and must never be used on damp carpets or wet fl oors.
Important - in the event of the mains supply cable of this vacuum cleaner requiring replacement, we recommend that this be
carried out by Electrolux Service Staff.
Spares
New fi lters, brush rollers and drive belts can be obtained from Authorised Electrolux Dealers and electrical retailers. If diffi culty is experienced
in obtaining spares please call us on 08706 055055 or visit our website at www.shop.electrolux.co.uk
GUARANTEE
This guarantee is in addition to your statutory and other legal rights.
This product is for household use only.
Electrolux products are carefully designed, manufactured, tested and inspected and, in consequence, we undertake to replace or repair
any part found to be defective in materials or workmanship, within one year of delivery to the original purchaser, free of charge. You may
be required to take the product to your nearest service provider if the product requires attention during the fi rst year.
There are certain conditions which may invalidate this guarantee:
a. It is dependent upon the appliance being correctly installed and used in accordance with the Company’s instructions under normal
domestic conditions within the United Kingdom or the Republic of Ireland.
b. Service at all times must be carried out by an Electrolux Service Representative or authorised agent.
c. The guarantee may be invalidated by unauthorised repair or modifi cation of the appliance.
d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.
(example: blocked/dirty fi lters)
Electrolux does not accept liability for all defects arising from neglect, misuse or accident. This guarantee excludes such normal wearing
parts as drive belts, brushes and fi lters as the life of these depends upon the amount and nature of use.
Proof of purchase will be required before service under guarantee is provided. Please call 08706 055 055 for assistance.
IMPORTANT:
For future reference we suggest you record the following details here, and keep the receipt with the handbook as proof of purchase.
Purchased from ____________________________________________________
Date purchased __________________Model no __________________________
101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ
Features of the Electrolux vacuum cleaner and ac ces so ries supplied with it are pro tect ed in Great Britain and abroad by Patents or Registered
Designs.
This appliance conforms with the requirements of the amend ed E.E.C. directive No. 89/336/EEC re lat ing to elec tro mag net ic compatibility
(EMC) CE.
Electrolux, may introduce modifi cations to their product from time to time, and con se quent ly the details given in this booklet are subject to
alteration without notice.
4
Quick Reference
Extension Tube and Crevice Nozzle. (Pull apart.)
1
Dusting Brush.
2
Hose.
3
Vacuum Cleaner Body.
4
QUICK REFERENCE HOW TO ASSEMBLE
4
3
Electrical Cord.
5
Handle.
6
Screws located in the accessory package.
7
How To Assemble
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts. Make sure ON/OFF switch is
in the OFF position before plugging in.
Slide the handle into the
1
grooves at the top of the
vacuum body as shown.
Place the two screws
2
(supplied) into the holes at
back of the unit and tighten
with a screwdriver.
5
1
2
6
Place the hose
6
on the back of the
vacuum, wrapping it
up and over the hose
hook as shown.
Firmly push the
7
end of the hose into
the hose retainer
in the hood of the
vacuum.
Pull the electrical cord
3
up to the cord retainer
and fi rmly push down
into retainer. This will
keep the cord out of the
way the next time you
vacuum.
Wind the cord around
4
the two cord hooks
on the back of the
vacuum.
Secure plug to the cord
5
to prevent unwinding.
Store the extension
8
tubes on the side
of the vacuum in
front of the hose.
Store the dusting
9
brush on its
holder.
5
HOW TO USE
WARNING: Avoid injury. Keep loose clothing,
hair, fi ngers, and all other parts of
body away from any moving part
(such as the revolving brushroll).
Turn off the switch and unplug the
cleaner before changing the cleaner
height setting.
ON/OFF Switch.
International symbol I
means On, International
symbol O means Off.
HOW TO USE
NOTE: While using accessories,ensure the
cleaner is in the upright parked position
and the fl oor selector is switched to
"long pile."
1. To use accessories remove hose from hose retainer in
hood of cleaner by lifting up and twisting.
2. Place desired accessory onto end of hose or wand.
Dusting/
Upholstery
Brush
Crevice
Nozzle
Handle Release. Step
on handle release to pull
handle back to a comfortable
operating position. To lower
handle completely to the
fl oor, depress handle release
a second time.
Helpful Information:
Before cleaning under
low furniture, check area
fi rst for objects that might
harm the unit or block the
vacuum hose.
Cleaner Height Setting. An adjustment that raises or
lowers the cleaner base to match the type of fl oor surface.
With the cleaner cord unplugged, set the adjustment to
lowest setting for maximum carpet cleaning. If the cleaner is
diffi cult to push, move adjustment to next highest setting
until cleaner is comfortable to push. The brush roll must
reach the carpet for effective cleaning. For ease in moving
the adjustment knob, place handle in operating position and
tilt cleaner back to remove weight from front wheels.
Helpful Information:
Listen to your cleaner. If you notice a change in the sound
of the motor or a change in performance, it could simply
indicate a common usage or maintenance issue. Such
as a need to raise or lower the carpet height adjustment,
possible blockage in hose or brush roll area, or a broken
or loose brush roll belt. These are all easy to fi x and the
instructions are included in this owner’s guide. Becoming
familiar with the information in this guide will help you to
get the best possible performance from your new cleaner
for many years to come.
Dusting/Upholstery Brush is for furniture, blinds,
books, lamp shades, shelves, curtains, draperies, cushions
and fabrics.
Crevice Wand cleans corners, stairs, skirting boards, and
between cushions.
Nested extension tubes to add reach.
• Grasp both tubes near ridges.
• Pull apart.
• Turn ridge end to center.
The instructions in the booklet serve as a guide to routine
maintenance. To avoid unnecessary service calls, check the
top and bottom fi lters, belt and brush roll often.
• Push tubes together.
6
ROUTINE MAINTENANCE
NOTE: Turn off the switch and unplug the electrical
cord before routine maintenance. Never
operate the vacuum cleaner without the
top and bottom fi lters in place.
NOTE: When vacuuming carpet fresheners or
cleaners, powder, plaster dust, or similar
fi ne substances, the top and bottom fi lters
will require more frequent maintenance.
Removing the Dust Cup:
Remove dust cup by sliding
dust cup lever from right to
left.
Grasp dust cup with both
hands and pull out.
Maintenance of Top Filter, Code EF87a:
This new Electrolux Upright uses a cyclone system as a
primary fi lter and a secondary or top mounted fi lter that
has been moved outside of the dust cup. This makes
emptying the dirt cup much easier and less messy. It is
normal for this fi lter to trap fi ne particles, pet hair, and
carpet fi bres. It should be cleaned periodically depending
on vacuuming conditions. For optimum performance
replace it every 12 months.
NOTE: Use only GENUINE ELECTROLUX
replacement fi lters, Code EF87a.
Remove top fi lter cover by
grasping right edge and
pivoting to the left.
Remove fi lter frame from top
fi lter cover.
ROUTINE MAINTENANCE
Empty dust cup into bin.
Reposition dust cup in cleaner
body and secure by moving
lever from left to right.
Remove foam from fi lter
frame. Shake fi lter frame
and foam fi lter to remove
excess dust.
When dry, replace foam
fi lter into fi lter frame.
WARNING: Always check foam fi lter and frame
are correctly installed in the cover
before using vacuum.
If necessary, the fi lter frame
and foam fi lter can be rinsed
in luke warm water and
air dried. NOTE: The fi lter
frame, foam and cover are
not dishwasher safe.
Replace fi lter frame into top
fi lter cover. Replace top fi lter
cover by pivoting back onto
cleaner from left to right.
7
ROUTINE MAINTENANCE
(Continued)
Filter Screen
The fi lter screen is located directly above the dust cup and
is easily removed by turning it counter-clockwise. It should
be checked regularly to ensure an open airway. Reinsert
the screen by turning it clockwise.
Maintenance of Bottom Filter, Code EF2 or EF82:
Check the bottom fi lter frequently. For optimum performance,
replace bottom fi lter every 12 months.
NOTE: Use only GENUINE ELECTROLUX
replacement fi lter, Code EF2.
NOTE: Use only GENUINE ELECTROLUX
replacement HEPA fi lter, Code EF82.
PERIODIC MAINTENANCE
CAUTION: Turn off the switch and unplug
the electrical cord before periodic
maintenance. Never operate the vacuum
cleaner without the dust cup or fi lter
assembly in place.
Brushroll
The brushroll turns as it sweeps and combs the carpet pile.
Remove hair and threads from the brushroll so it continues
brushing the carpet. To maintain the most effi cient cleaning,
the bristles must touch the carpet. To test the bristle length,
hold a ruler against the underneath side of the cleaner. If the
bristles no longer touch the ruler, replace the brushroll.
Brushroll Belt, Code ZE090
The brushroll belt turns the brushroll to agitate, sweep, and
comb the carpet pile. Check the belt regularly to be sure it is
in good condition. Replace the belt if it stretches, cracks or
loses tension. Cut away any hair or threads wound around
the brushroll or the belt pulley because the build-up could
cause the belt to rotate unevenly.
How To Replace Brushroll Belt
Remove the bottom
fi lter cover by grasping the right edge and
pivoting to the left.
ROUTINE MAINTENANCEPERIODIC MAINTENANCE
On some models,
remove fi lter pad and
shake to remove excess
dust. If necessary this
pad can be cleaned
by vacuuming with
8
another cleaner.
Pull fi lter frame from unit by
pulling on tab in center.
Replace filter into unit.
Replace bottom fi lter cover
by pivoting back onto cleaner
from left to right.
1. Lower handle to fl oor to change belt.
2. Remove the two screws from the top of the hood.
PERIODIC MAINTENANCE (continued)
3. Lift hood to remove.
4. Lift left end of brushroll.
5. Remove and discard belt.
6. Place new belt around motor shaft.
7. Place new belt around brushroll pulley.
8. Align left end cap with base. Push end cap securely into
place.
9. Pull right side of brushroll to stretch belt. Secure right end
cap into base.
IMPORTANT
10. Rotate brushroll by hand 2 full rotations to properly
position belt.
11. Place hood back on cleaner. Replace and tighten two
screws.
12. Return vacuum to upright position.
NOTE: Use only GENUINE ELECTROLUX
replacement brush roll belt, Code ZE090.
PERODIC MAINTENANCE
9
To Clear Blockages in Hose
CAUTION: Turn off the switch and unplug the
electrical cord before clearing hose.
PROBLEM SOLVING
3. Remove the hood from the cleaner and check for a
blockage in the brushroll area. Make sure the hose inlet
is clear. If no blockage is found, continue to step 4.
After the blockage is found and cleared, replace the hood
on the cleaner.
Hose
Retainer
Hose
1. Firmly pull the end of the hose from the hose retainer on
the hood of the vacuum.
2. Check for blockages in the hose and hose retainer. Flexing
the hose may help loosen any blockage. If no blockage
is found, continue to step 4.
If blockage is found, clear the blockage and replace the
hose in the hose retainer. If the blockage is in the hose
retainer and cannot be cleared, continue to step 3.
4. Twist the hose from the coupling elbow on the back of
cleaner. Check for blockages at cleaner opening and in
hose. If a blockage is found, clear the blockage.
The screw attaching the clear hose adapter can be
removed for better access to a blockage.
5. Screw the hose back onto the back of the cleaner and
replace the other end of the hose into the hose retainer
on the hood of vacuum.
10
PROBLEM SOLVING
11
If you experience any problems with your cleaner,
don’t struggle taking it back to the shop
Call our dedicated Customer Helpline
for help and advice on
08706 055055
Accessory Items in This Carton
1 Dusting/Upholstery Brush
1 extension tube,
1 crevice wand
1 extra belt
Riser Visor Turbo
(on some models)
1 accessory
package (2 screws)
1 vacuum cleaner
Thank you for purchasing an Electrolux
handle
cleaner.
Don’t Forget to Use
Genuine Electrolux Belts
Caution: Damages caused by the use of non-genuine
parts are not covered by the Electrolux Guarantee.
Part No. 76042 (11/05) Printed in PRC
Loading...