Household Type
Z2920 / Z2930 Series
5
5
6
8
8
8 - 9
10
IMPORTANT
www.electrolux.co.uk
GUARANTEE
QUICK REFERENCE
Top Filter
Clear Hose
Guide
For any advice
on your cleaner and
to order fi lters and
accessories,
please telephone the
Electrolux Helpline on
08706 055055
When using an electrical appliance, basic precautions should always be followed, in clud ing the following:
WARNING
To reduce the risk of fi re, electric shock, or injury:
Do not use outdoors or on wet surfaces.
Do not leave vacuum cleaner whilst plugged in
• Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.
Turn off all controls before unplugging.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything
that may reduce airfl ow.
This vacuum cleaner creates suction and contains a revolving brush roll. Keep hair, loose clothing, fi ngers, and all parts
of body away from openings and moving parts.
storage position while using attachments.
Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.
Store your cleaner indoors in a cool, dry area.
2
IMPOR
T
ANT INFORM
A
TION
WARNING
The brush in the cleaning head rotates at high speed and can cause damage to the mains supply cable if the cleaner passes
over it during cleaning operations.
Care should be taken to ensure that this does not happen. If the cleaning head has accidentally passed over the mains supply cable
the following action should be taken:
2
3.
If there is any sign of damage to the supply cable it MUST be renewed. The repair MUST be carried out by an Electrolux Service
Agent or a similar qualifi ed person.
use the machine with a damaged mains supply cable.
After using proprietary carpet conditioning powders, it is recommended that the fi lters be changed. Some of these preparations contain
sub stanc es which if left in the vacuum cleaner for extended periods could damage the plastic mouldings which form the structure of
the cleaner.
instructions.
chamber or dust cup.
Thermal Cut Off
This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner switches off, push the
switch pedal once and unplug the cleaner. Check the cleaner for a possible source of overheating such as a full dust cup, a blocked hose or
clogged fi lter. If these conditions are found, fi x them and wait at least 60 minutes before attempting to use the cleaner. After the 60 minute
period, plug the cleaner back in and push the on/off switch On (I). If the cleaner still does not run, please call Electrolux Customer Care.
3
CHECK THE VOLTAGE
is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.
CONNECTING TO YOUR ELEC TRIC I TY SUPPLY
MUST
be
indicated by the col oured insert on the base of the plug.
In no circumstances must the plug be used without a correct fuse cover fi tted.
The cut off plug should then be dis posed of to prevent the hazard of shocks in case it should be plugged into a 13 amp socket in
another part of your home.
The wires in the mains cable of this appliance are coloured in ac cord ance with the following code:
Blue: Neu tral. Brown: Live.
As the colours of the wires in the mains cable of this appliance may not correspond with the col oured markings iden ti fy ing the terminals
in your plug, proceed as follows:
The wire which is coloured blue must be con nect ed to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be con nect ed to the terminal which is marked with the letter L or coloured red.
or green-and-yellow. This cleaner is dou ble in su lat ed and no earth con nec tion is nec es sary.
the guarantee.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and
tion about recycling of this product, please contact your local city offi ce, your household waste disposal service or the shop
where you purchased the product.
Cover
Cord
Clamp
4
IMPOR
T
ANT INFORM
A
TION
SERVICE
Should you require service on your Electrolux cleaner, please telephone Electrolux Customer Services on 08706 055055.
spares, please contact Electrolux on 08706 055055.
SERVICE CHECKLIST
•
If
your cleaner will not operate, check the plug connection, plug fuse and mains fuse.
•
Never allow
the dust cup to become so full that it impedes the air-fl ow, thus reducing the cleaning effi ciency of the machine.
The character of household dust and its effect on the air-fl ow through the machine may vary considerably. Fluffy dust allows
air to pass through readily whereas fi ne powdery dust or proprietary cleaning powders, pack tightly in the dust cup, offering
greater resistance to air-fl ow and will reduce cleaning effi ciency if the cup becomes overloaded.
•
Always store
your cleaner and spare dust fi lters in a dry place.
•
the fi lter pads three or four times a year. This is essential to ensure continued high fi ltration of dust particles.
Sucking up
such items as stockings, clippings of cloth, sizeable pieces of paper, wrappings from cigarette packets or sweets
etc., may block the hose.
be given free of charge, under the guarantee.
Should a blockage occur, fi rst disconnect the cleaner from the electricity
supply, refer to section headed “Block ag es”. If these op er a tions are not suc cess ful, contact Electrolux on 08706 055055.
•
Never
pick up hot cinders or lighted cigarette ends.
Make certain
that your cleaner does not come into contact with water or any other liquid. It is not designed as a
wet pick up cleaner, and must never be used on damp carpets or wet fl oors.
carried out by Electrolux Service Staff.
Spares
in obtaining spares please call us on 08706 055055 or visit our website at www.shop.electrolux.co.uk
GUARANTEE
This guarantee is in addition to your statutory and other legal rights.
This product is for household use only.
any part found to be defective in materials or workmanship, within one year of delivery to the original purchaser, free of charge. You may
be required to take the product to your nearest service provider if the product requires attention during the fi rst year.
There are certain conditions which may invalidate this guarantee:
a.
It is dependent upon the appliance being correctly installed and used in accordance with the Company’s instructions under normal
domestic conditions within the United Kingdom or the Republic of Ireland.
b.
Service at all times must be carried out by an Electrolux Service Representative or authorised agent.
c. The guarantee may be invalidated by unauthorised repair or modifi cation of the appliance.
d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.
(example: blocked/dirty fi lters)
parts as drive belts, brushes and fi lters as the life of these depends upon the amount and nature of use.
____________________________________________________
__________________
__________________________
101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ
This appliance conforms with the requirements of the amend ed E.E.C. directive No. 89/336/EEC re lat ing to elec tro mag net ic compatibility
(EMC) CE.
alteration without notice.
5
Quick Reference
xtension Tube
and Crevice Nozzle. (Pull apart.)
Vacuum Cleaner Body.
Electrical Cord.
Screws located in the accessory package.
Riser Viser
Turbo Nozzle (on some models only)
2
3
4
6
Electrical Cord.
5
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts. Make sure ON/OFF switch is
2
Slide the handle into the
grooves at the top of the
vacuum body as shown.
back of the unit and tighten
with a screwdriver.
6
on the back of the
vacuum, wrapping it
end of the hose into
th e hose retaine r
vacuum.
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts. Make sure ON/OFF switch is
3
and fi rmly push down
way the next time you
vacuum.
Wind the cord around
th e two cord hooks
on the back of the
vacuum.
Secure plug to the cord
to prevent unwinding.
4
5
8
9
Store the extension
tubes on the side
of the vacuum in
front of the hose.
Store the dusting
brush on its
2
3
5
6
QUICK REFERENCE
HOW TO ASSEMBLE
Riser Viser
8
8
How To Assemble
6
HOW TO USE
to your cleaner. If you notice a change in the sound
of the motor or a change in performance, it could simply
as a need to raise or lower the carpet height adjustment,
possible blockage in hose or brush roll area, or a broken
or loose brush roll belt. These are all easy to fi x and the
familiar with the information in this guide will help you to
get the best possible performance from your new cleaner
for many years to come.
ON/OFF Switch
symbol
O
means Off.
Step
on handle release to pull
operating position. To lower
fl oor, depress handle release
a second time.
Cleaner Height Setting
With the cleaner cord unplugged, set the adjustment to
diffi cult to push, move adjustment to next highest setting
The brush roll must
the adjustment knob, place handle in operating position and
tilt cleaner back to remove weight from front wheels.
fi rst for objects that might
vacuum hose.
WARNING: Avoid injury. Keep loose clothing,
body away from any moving part
(such as the revolving brushroll).
Turn off the switch and unplug the
cleaner before changing the cleaner
cleaner is in the upright parked position
and the fl oor selector is switched to
2. Place desired accessory onto end of hose or wand.
Turn ridge end to center.
Grasp both tubes near ridges.
books, lamp shades, shelves, curtains, draperies, cushions
and fabrics.
Crevice Wand
cleans corners, stairs, skirting boards, and
between cushions.
tubes
to add reach.
Crevice
The instructions in the booklet serve as a guide to routine
top and bottom fi lters, belt and brush roll often.
7
ROUTINE MAINTENANCE
Turn off the switch and unplug the electrical
cord before routine maintenance. Never
operate the vacuum cleaner without the
top and bottom fi lters in place.
When vacuuming carpet fresheners or
cleaners, powder, plaster dust, or similar
fi ne substances, the top and bottom fi lters
will require more frequent maintenance.
Grasp dust cup with both
of debris.
dust cup lever from right to
and secure by moving lever
from left to right.
grasping r ight edge an d
pivoting to the left.
aintenance of Top Filter, Code EF87
This new Electrolux Upright uses a cyclone system as a
primary fi lter and a secondary or top mounted fi lter that
emptying the dirt cup much easier and less messy. It is
carpet fi bres. It should be cleaned periodically depending
on vacuuming conditions. For optimum performance
fi lter cover.
frame.
Shake fi lter frame
and foam fi lter to remove
excess dust.
and foam fi lter can be rinsed
air dried.
frame, foam and cover are
When dry, replace foam
fi lter into fi lter frame.
fi lter cover. Replace top fi lter
cover by pivoting back onto
cleaner from left to right.
WARNING: Always check foam fi lter and frame
are correctly installed in the cover
before using vacuum.
ROUTINE MAINTENANCE
8
ROUTINE MAINTENANCE
(Continued)
cover by grasping the right
edge and pivoting to the left.
Check the bottom fi lter frequently. For optimum performance,
by pivoting back onto cleaner
from left to right.
pulling on tab in center.
On some mod e l s,
shake to remove excess
dust. If necessary this
pad can be cleaned
by va cuuming with
another cleaner.
2. Remove the two screws from the top of the hood.
CAUTION
the electrical cord before periodic
cleaner without the dust cup or fi lter
assembly in place.
The brush roll turns as it sweeps and combs the carpet pile.
brushing the carpet. To maintain the most effi cient cleaning,
the bristles must touch the carpet. To test the bristle length,
bristles no longer touch the ruler, replace the brush roll.
Code ZE090
The brush roll belt turns the brush roll to agitate, sweep, and
comb the carpet pile. Check the belt regularly to be sure it is
the brush roll or the belt pulley because the build-up could
cause the belt to rotate unevenly.
PERIODIC MAINTENANCE
9
4. Lift left end of brush roll.
5. Remove and discard belt.
6. Place new belt around motor shaft.
7. Place new belt around brush roll pulley.
8. Align left end cap with base. Push end cap securely into
place.
9. Pull right side of brush roll to stretch belt. Secure right end
cap into base.
position belt.
screws.
PERIODIC MAINTENANCE
(continued)
3. Lift hood to remove.
brush roll belt
ZE090
PERODIC MAINTENANCE
To Clear Blockages in Hose
CAUTION
electrical cord before clearing hose.
the hood of the vacuum.
Check for blockages in the hose and hose retainer. Flexing
the hose may help loosen any blockage.
3. Remove the hood from the cleaner and check for a
blockage in the brush roll area. Make sure the hose inlet
If no blockage is found, continue to step 4.
After the blockage is found and cleared, replace the hood
on the cleaner.
4.
Twist the hose from the coupling elbow on the back of
cleaner. Check for blockages at cleaner opening and in
The screw attaching the clear hose adapter can be
5. Screw the hose back onto the back of the cleaner and
on the hood of vacuum.
PROBLEM SOLVING
(5/05)
Printed in PRC
Thank you for purchasing an Electrolux
Accessory Items in This Carton
Caution: Damages caused by the use of non-genuine
parts are not covered by the Electrolux Guarantee.
for help and advice on
Loading...