AEG-Electrolux Z166A User Manual
Lightweight
Vacuum Cleaner
Household Type
Owner’s Guide
Model Z160A
IMPORTANT
For any advice
on your cleaner,
please telephone
Customer Care
08706 055055
Index
Important Safeguards .............2
Service Information ................. 4
Identify Parts ........................... 5
Assemble ................................ 5
Use..........................................6
Dust Cup ................................. 7
Dust Cup Filter ........................ 7
Cleaner Care...........................8
Guarantee ............................... 9
www.electrolux.com
IMPORTANT SAFEGUARDS
When using an electric appliance, basic precautions should always be follo wed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER
WARNING
To reduce the risk of fire, electric shock, or injury:
●●
● Do not use outdoors or on wet surfaces.
●●
●●
● Do not leave vacuum cleaner when plug ged in. Turn off the switch and unplug the
●●
electrical cord when not in use and before servicing.
●●
● Do not allow to be used as a toy. Close attention is necessary when used by or near
●●
children.
●●
● Use only as described in this manual. Use only manufacturer’s recommended
●●
attachments.
●●
● Do not use with damaged cord or plug. If vacuum cleaner is not working as it should,
●●
has been dropped, damaged, left outdoors, or dropped into water, retur n it to a
service center before using.
●●
● Do not pull or carry by cord, use cord as a handle, close a door on cord or pull cord
●●
around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord
away from heated surfaces.
●●
● Do not use extension cords or outlets with inadequate current carrying capacity.
●●
●●
● Turn off all controls before unplugging.
●●
●●
● Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
●●
●●
● Do not handle plug or vacuum cleaner with wet hands.
●●
●●
● Do not put any object into openings. Do not use with any opening blocked; keep free
●●
of dust, lint, hair, and anything that may reduce airflow.
●●
● This vacuum cleaner creates suction. K eep hair , loose clothing, fingers, and all parts
●●
of body away from openings and moving parts.
●●
● Do not pick up anything that is burning or smoking, such as cigarettes, matches, or
●●
hot ashes.
●●
● Do not use without motor filter in place.
●●
●●
● Use extra care when cleaning on stairs.
●●
●●
● Do not use to pick up flammable or combustible liquids such as gasoline, or use in
●●
areas where they may be present.
●●
● Store your cleaner indoors in a cool, dry area.
●●
●●
● Keep your work area well lighted.
●●
●●
● Unplug electrical appliances before vacuuming them.
●●
Double Insulation
●●
●
Your vacuum cleaner is double insulated. This means that all external parts are electrically
●●
insulated from the mains. This is done by placing insulation barriers between the electrical and
mechanical components, making it unnecessary for the cleaner to be earthed.
SAVE THESE INSTRUCTIONS
2
BEFORE YOU START
CHECK THE VOLTAGE
First check the voltage shown on the data plate (see rear view) to make sure that the cleaner is of the correct
voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.
CONNECTING TO YOUR ELECTRICITY SUPPLY
Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a rewirable plug
incorporating a 3A fuse.
In the event of the fuse requiring replacement the fuse cover should be removed using a small screwdriver. The old
fuse MUST be replaced by a 3A ASTA approved BS1362 fuse or a BSI approved fuse. The cover must
be replaced before the plug is used again. In the event of loss of the fuse cover, replacements can be
obtained from your Electrolux dealer or Electrical Retailers and must be of the same colour as indicated
by the coloured insert on the base of the plug.
If difficulty is experienced in obtaining a replacement, contact Electrolux on 08706 055055.
In no circumstances must the plug be used without a correct fuse cover fitted.
If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate
plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13
amp socket in another part of your home.
The wires in the mains cable of this appliance are coloured in accordance with the following code: Blue: Neutral.
Brown: Live.
As the colours of the wires in the mains cable of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
If using a three-pin plug, do not make any connection to the terminal marked with the letter E or by the earth symbol
or coloured green or green-and-yellow. This cleaner is double insulated and no earth connection is necessary.
It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, have it done
by a qualified electrician, as Electrolux cannot regard the repair of faults on the plug connection as a service that
can be given free of charge under the terms of the guarantee.
Fuse Cover
3 Amp Fuse
WARNING
The cleaning head can cause damage to the mains supply cable if the cleaner passes over it during cleaning
operations.
Care should be taken to ensure that this does not happen. If the cleaning head has accidentally passed over the mains
supply cable the following action should be taken:
1. Switch off and remove the plug from the socket outlet.
2. Examine the mains supply cable for damage (only after removing the plug from the socket outlet).
3. If there is any sign of damage to the supply cable it MUST be renewed. The repair MUST be carried out by Electrolux
Service Staff or a similar qualified person.
4. NEVER use the machine with a damaged mains supply cable.
Proprietary carpet conditioning and air freshening materials
After using proprietary carpet conditioning powders, it is recommended that the filter be changed. Some of these
preparations contain substances which if left in the vacuum cleaner for extended periods could damage the plastic
mouldings which form the structure of the cleaner.
Many air fresheners, household deodorants, sprays and polishes contain a highly flammable gas propellant.
Because of this, it is particularly important that these products are used strictly in accordance with the relevant
manufacturer’ s instructions.
It is essential that none of the above products are spra yed directly into the vacuum cleaner or its filter .
Fuse
Blue
Brown
Cord Clamp
3
SERVICE
Should you require service on your Electrolux cleaner, please telephone 08706 055055.
Before requesting service, please check whether your problem is covered under Service
Checklist (see below).
SERVICE CHECKLIST
• If your cleaner will not operate, check the plug connection, plug fuse and mains fuse .
• Never allow the filter to become so clogged that it impedes the air-flow , thus reducing
the cleaning efficiency of the machine. The character of household dust and its eff ect
on the air-flow through the machine may vary considerably. Fluffy dust allows air to
pass through readily whereas fine powdery dust or proprietary cleaning powders,
pack tightly in the filter, off ering greater resistance to air-flow and will reduce cleaning
efficiency if the filter becomes overloaded. Always ensure that you have a spare
genuine Electrolux filter.
• Always store your cleaner and spare filters in a dry place.
• Renew the filter three or four times a y ear. This is essential to ensure continued high
filtration of dust particles.
• Never pick up hot cinders or lighted cigarette ends.
• Make certain that your cleaner does not come into contact with water or any
other liquid. It is not designed as a wet pick up cleaner, and must never be
used on damp carpets or wet floors.
Important - in the event of the mains supply cable of this vacuum cleaner requiring
replacement, we recommend that this be carried out by a Electrolux Service Agent.
Spares
New filters can be obtained from Authorised Electrolux Dealers and electrical retailers.
If difficulty is experienced in obtaining spares please call us on 08706 055055.
DO NOT OIL the motor at any time. The bearings are permanently
lubricated and sealed.
Rating Plate
The model, type, and serial numbers are
indicated on the rating plate located on the back
side of the cleaner. For prompt and complete
service information, always refer to these
numbers when inquiring about service.
Model & Type No. ____________________
Serial No. ___________________________
4
MODEL TYPE SERIAL NO.
VOLTS WATTS HERTZ
ELECTROLUX
Loading...