AEG-Electrolux Z1136GB, Z1135GB User Manual

Website: www.electrolux.com

219 02 40-27

ABC

?

GUARANTEE

Customer Service Tel: [phone]

This guarantee is in addition to your statutory and other legal rights.

Electrolux products are carefully designed, manufactured, tested and
inspected and in consequence, we undertake to replace or repair any part
found to be defective in materials or workmanship, within one year of delivery
to the original purchaser, free of charge.

There are certain conditions which may invalidate this guarantee:
a. It is dependent upon the appliance being correctly installed and used in

accordance with the Company’s instructions under normal domestic
conditions within the United Kingdom or the Republic of Ireland.

b. Service at all times must be carried out by an Electrolux Service

Representative or authorised agent.

c. The guarantee may be invalidated by unauthorised repair or modification of

the appliance.

Electrolux decline all responsibility for all damages arising from neglect,
misuse or accident, any improper use of the appliance or in cases of tampering
with the appliance. This guarantee excludes such normal wearing parts as
drive belts, brushes and dust bags as the life of these depends upon the
amount and nature of use.

Proof of the date of purchase will be required before service under guarantee
is provided.

Important:

For future reference we suggest you record the following details here, and
keep the receipt with the handbook as proof of purchase.

Purchased from _________________________________________________________

Date purchased _________________________ Model No _____________________

MAIL ORDER FORM

Should you experience difficulty in obtaining original spares from your local
stockist, may we suggest you make use of this order form.

To order by phone call: 08706 055 055 between 8.30am – 5.00pm Monday to Friday.
To order by post, complete the form and send to the address printed at the bottom

of this page.

Name _____________________________________ Model No _______________________
Address____________________________________ Product No _____________________
____________________________________________ (These numbers can be found
____________________________________________ on your rating plate)
Postcode __________________________________

Prices are correct at time of publication.

Method of payment (Please tick):

Credit Card ______________ Postal Order __________Cheque _____________________
Mastercard ______________ Visa _______________________________________________
Card Number ___________________________________ Expiry date _________________

Please make cheques payable to Electrolux

Your Signature _____________________ Date ____________________________________

After Sales, 101 Oakely Road, Luton Beds, LU4 9QQ

Original Bags & Filters Qty Price

inc vat Total

E44 = 5 Dustbags £3.56
EF44 = Filters (pack of 4) £3.63

Floorcare & Light Appliances

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed,
including the following:

READ ALL THE INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING

To reduce the risk of fire, electric shock, or injury:

• Do not use outdoors or on wet surfaces.

• Do not leave the vacuum cleaner when plugged in. Turn off the switch and unplug the
electrical cord when not in use and before servicing.

• Do not allow to be used as a toy. Close attention is necessary when using around
children.

• Use only as described in this manual. Use only manufacturer’s recommended
attachments.

• Do not use with damaged cord or plug. If the vacuum cleaner is not working as it
should, has been dropped, damaged, left outdoors, or dropped into water, return it to a
service centre before using.

• Do not pull or carry by cord, use cord as a handle, close door on cord. Keep cord away
from heated surfaces.

• Do not use extension cords or outlets with inadequate current carrying capacity.

• Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug not the cord.

• Do not handle plug or vacuum cleaner with wet hands.

• Do not put any object into openings. Do not use with any opening blocked, keep free of
dust, lint, hair and anything that may reduce air flow.

• This vacuum cleaner creates suction. Keep hair, loose clothing, fingers and all parts of
the body away from openings and moving parts.

• Do not use to pick up anything that is burning or smoking, such as cigarettes, matches
or hot ashes.

• Do not use without dust bag and filters in place.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustibe liquids such as gasoline, or use in
areas where they may be present.

• Store your cleaner indoors in a cool, dry area.

• Keep your work area well lighted.

• Unplug electrical appliances before vacuuming them.

SAVE THESE INSTRUCTIONS

Thank You for choosing an Electrolux vacuum cleaner. To
ensure total satisfaction, please read this insturction book
carefully. Retain for reference.

Please keep both flaps open when reading these operating
instructions.

Tools for the Mondo range

C

Dust bags

B

Extension tubes (x2)

C Telescopic tube

D

Swivel hose and handle with manual suction control

E

Combination carpet/hard floor nozzle

G

Narrow crevice nozzle
Upholstery nozzle

I

Dusting brush

J

Small tool holder

K

Large tool holder

Ensuring your safety

The Electrolux Mondo is for domestic use only and has
been designed to ensure maximum safety and performance.
Please follow these simple precautions:

L

The Mondo is double-insulated so it must not
be earthed

M

The Mondo is only to be used by adults

N

Always store in a dry place

O

Do not use to pick up liquids

P

Avoid sharp objects

Q

Do not pick up hot cinders or lighted cigarette ends

R

Do not use near flammable gases

S

Avoid tugging on the mains cable and check cable
regularly for damage

T

Note: Do not use cleaner with a damaged cable.
If the cable is damaged, it should be replaced at
an Electrolux Service Centre.

U

The plug must be removed from the socket-outlet
before cleaning or maintaining the appliance

W

All service and repairs must be carried out by
authorised Electrolux service staff

Getting Started

•

Check the dust bag is in place.

•

Insert the hose until the catches click to engage.
(Press catches inwards to release).

•

Attach tubes or telescopic tube to the hose handle and
floor nozzle by pushing together.
(Pull apart to dismantle.)

•

Extend the cable and connect to mains. Mondo’s are
fitted with cable rewind, ensure cable is not twisted
before use (Press foot pedal to rewind. Note: Please

hold the plug to prevent it striking you or the
machine).

•

Press the On/Off button to activate the cleaner.

•

To reduce suction, gradually open the aperture on the
hose handle. Slide the electronic suction control
between ‘–’ and ‘+’.

Features for the Mondo range

AXMains cable
B

Y

Cable rewind pedal

C

c

Power outlet (for the use of power driven tools)

D

t

Electronic suction control

E

d

Mechanical dust bag indicator

F

e

Hose connection

G

f

Dust bag security device – prevents lid closing
without a dust bag in place

H

A

Carrying Handle

I

h

Cover release catch for dust bag compartment

J

i

On/off switch

K

j

Storage slot for floor nozzle and extension tubes
when in use

L

k

Storage slot for floor nozzle and extension tubes
when not in use

M

J

Tool holder (for attachment to hose handle or
extension tube) with slot for wall mounting

N

K

Tool holder (for attachment to hose handle)

Getting the best results

n

Carpets: Use the floor nozzle with the lever in
this position

k

Hard floors: Use the floor nozzle with the lever in
this position

p

Loose rugs/curtains/lightweight fabrics: Reduce
the suction power. Use the floor nozzle for loose rugs
and the upholstery nozzle for curtains, cushions etc.

q

Lamps, pictures and bookshelves: Use the dusting
brush.

r

Confined areas: Use the crevice nozzle for crevices,
corners and radiators.

Dust bag indicator and changing the dust bag

For peak performance the dust bag must be changed
when full. If the dust bag breaks in the cleaner, the
Mondo must be taken to an Electrolux Service Centre
for cleaning. The dust bag indicator window will
gradually turn red when filling and completely red
when full.

To check the dust bag, the cleaner must be switched
on, with all attachments connected and off the floor.

The dust bag full indicator may signify that the bag is
blocked (occasionally caused by very fine dust)
which will cause loss of suction and may result in
overheating. If this occurs change the dust bag even
if it is not full.

To change the dust bag:

A Release catch and swing back lid before removing

the dust bag, bend the tab into the hole to prevent

dust escaping
B Remove the dust bag
C Insert new dust bag by fitting the bag slots over

holder.

We recommend the dust bag is changed:

*

after using a carpet cleaning powder.
*

if there is a bad smell from the cleaner, then you

should also change the filter.

Note:
use only Electrolux original dust bags (Ref E44)
and filters (EF 44)

Dust bag safety device

To avoid damaging the cleaner, do not use it without
a dust bag. A safety device is fitted which prevents
the cover closing without a dust bag. Do not attempt
to force the cover shut.

Changing the filters

These should be changed every fifth dust bag. Never
use the cleaner without the motor protection filter.

To change filters:

a) Lift lid, remove dust bag and filter
b) Insert new filter, replace dust bag and close.

There is also an exhaust filter.

To change exhaust filters:

a) Lift rear grill and remove filter
b) Insert new filter and replace grill.

Troubleshooting

1. Power: If the electric power does not come on,
disconnect from mains and check plug, cable and

fuses where appropriate.

2. Blockages/dirty filters: The cleaner may switch
itself off in the event of a severe blockage or
excessively dirty filter(s). In such cases, disconnect
from mains and allow to cool for 20-30 minutes.
Clear blockage and/or replace filter(s) and restart.

The cleaning of blocked hoses is not covered by the
guarantee. To avoid blockages and maintain suction
efficiency, the floor nozzles should be cleaned
regularly using the hose handle.

3. Water: If water is sucked into the cleaner the motor
must be changed at an Electrolux Service Centre.

If you have any comments on the cleaner or the
Instructions For Use Booklet please e-mail us on:
[e-mail]

The Global Appliance Company

ELECTRICAL SUPPLY
Before you start … check the voltage

Before connecting the cleaner to an electrical supply
ensure that the voltage marked on the data plate (on the
underside of the cleaner) is correct for your electrical
supply. If it is not, do not use the cleaner but refer back to
your dealer.

Connecting to your electricity supply

Permanently connected to the cleaner is a mains supply
(2-core) cable fitted with a non-rewirable plug
incorporating a 13A fuse. In the event of the fuse requiring
replacement the fuse cover should be removed using a
small screwdriver. The old fuse MUST be replaced by a
13A ASTA approved BS1362 fuse and the fuse cover must
be replaced before the plug is used again. In the event of
loss of the fuse cover, replacements can be obtained from
your Electrolux dealer or Electricity Board and must be of
the same colour as indicated by the coloured insert on the
base of the plug.

If difficulty is experienced in obtaining a replacement,
contact your nearest Electrolux Service Centre or phone
Electrolux Customer Services on 08706 055 055.

In no circumstances must the plug be used without a
correct fuse cover fitted.

If the plug that is fitted to your appliance is not suitable for
your socket outlet, it must be cut off and the appropriate
plug fitted. Remove the fuse from the cut off plug. The cut
off plug should then be disposed of to prevent the hazard
of shocks in case it should be plugged into a 13 amp
socket in another part of your home.

The wires in the mains cable of this appliance are
coloured in accordance with the following code:
Blue: Neutral.
Brown: Live.

As the colours of the wires in the mains cable of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black.

The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or
coloured red.

If using a three-pin plug, do not make any connection to
the terminal marked with the letter E or by the earth
symbol or coloured green or green-and-yellow.
This cleaner is double insulated and no earth connection
is necessary.

It is in your interest to ensure that the plug is correctly
attached to the mains cable. In case of doubt, have it
done by a qualified electrician, as Electrolux cannot
regard the repair of faults on the plug connection as a
service that can be given free of charge under the terms
of the guarantee.

As a general guide to fitting any plug

•

Ensure the lengths of wire inside the plug are
prepared correctly.

•

Connections should be firmly made after all conductor
strands are entered into the terminal posts.

•

When preparing the cable ends take care not to
damage the outer sheath, or the insulation
surrounding the inner conductors.

•

Tighten all screws.

•

Replace the top cover of the plug and secure.

219 0172-98

L

A

F

H

J

E

D

B

K

I

G

C

N

M

b

d

Y

t

1

2

3

1

2

3

MONDO Z1135

1+1

-





-











-

-

-









MONDO Z1136

1+1

-





-











-

-

-







