user manual
Induction wok
Profiline
WOK38TSIO
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2
Installation instructions 3
Product description 6
Operating instructions 8
SAFETY INFORMATION
For your safety and correct operation
of the appliance, read this manual
carefully before installation and use. Always keep these instructions with the
appliance even if you move or sell it.
Users must fully know the operation
and safety features of the appliance.
GENERAL SAFETY
Warning! Persons (including children)
with reduced physical sensory, mental
capabilities or lack of experience and
knowledge must not use the appliance.
They must have supervision or
instruction for the operation of the
appliance by a person responsible for
their safety.
CHILD SAFETY
• Only adults can use this appliance. Children must get supervision to make sure
that they do not play with the appliance.
• Keep all packaging away from children.
There is a risk of suffocation.
• Keep children away from the appliance
when it is on.
Warning! Start the child safety device
to prevent small children and pets from
an accidental activation of the
appliance.
SAFETY DURING OPERATION
• Remove all packaging, stickers and layers from the appliance before the first
use.
• Set the cooking zones to "off" after each
use.
• The risk of burns! Do not put the objects
made of metal, for example cutlery or
Helpful hints and tips 10
Care and cleaning 11
What to do if… 12
Environment concerns 13
Subject to change without notice
saucepan lids, on the surface that you
cook. They can become hot.
• The Users with an implanted pacemaker
must keep their upper body minimum 30
cm from induction cooking zones that are
activated.
Warning! Fire risk! Too hot fats and
oils can occur with ignition very quickly.
CORRECT OPERATION
• Always monitor the appliance during operation.
• Only use the appliance for domestic
cooking tasks!
• Do not use the appliance as a work or a
storage surface.
• Do not put or keep very flammable liquids
and materials, or fusible objects (made of
plastic or aluminium) on or near the appliance.
• Be careful when you connect the appliance to the near sockets. Do not let electricity bonds touch the appliance or hot
cookware. Do not let electricity bonds
tangle.
HOW TO PREVENT A DAMAGE TO THE
APPLIANCE
• If the objects or cookware fall on the
glass ceramic, the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
scratch the glass ceramic if you move
them on the surface.
• Do not let cookware boil dry to prevent
the damage to cookware and glass ceramics.
• Do not use the cooking zones with empty
cookware or without cookware.
electrolux 3
• Do not cover the parts of the appliance
with aluminium foil.
• Do not cover the ventilation space between the worktop and front of the unit
below it.
INSTALLATION INSTRUCTIONS
Before the installation, note down
the serial number (Ser. Nr.) from the
rating plate.The rating plate of the
appliance is on its lower casing.
ELECTROLUX
Made in Switzerland
220-240 V 50/60 Hz
/ Induction 3,2 kW
3,2 kW
55WOK03AUTyp:
SAFETY INSTRUCTIONS
Warning! You must read these!
Make sure that the appliance is not
damaged because of transportation.
Do not connect a damaged appliance.
If it is necessary, speak to the supplier.
Only an authorised service technician
can install, connect or repair this appliance. Use only original spare parts.
Only use built-in appliances after you
assemble the appliance into correct
built-in units and work surfaces that
align to the standards.
Do not change the specifications or
modify this product. Risk of injury and
damage to the appliance.
Fully obey the laws, ordinances, directives and standards in force in the
country where you use the appliance
(safety regulations, recycling regulations, electrical safety rules etc.)!
Keep the minimum distances to other
appliances and units!
Install anti-shock protection, for example install the drawers only with a protective floor directly below the appliance!
Protect the cut surfaces of the worktop
against moisture with a correct sealant!
Seal the appliance to the work top with
no space left with a correct sealant!
Protect the bottom of the appliance
from steam and moisture, e.g. from a
dishwasher or oven!
941 560 813 / 00PNC:
Serie:
WOK38TSIO
Warning! If there is a crack on the
surface, disconnect power supply
to prevent the electric shock.
Do not install the appliance adjacent to
doors and below windows! If not, hot
cookware can be hit off the hob when
you open doors or windows.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Install correctly to give anti-shock protection.
• Loose and incorrect plug and socket
connections can make the terminal become too hot.
• A qualified electrician must install the
clamping connections correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a single-phase.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C;
or higher). Speak your local Service Force
Centre.
The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a
contact opening width of minimum 3 mm.
You must have correct isolation devices:
line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth leakage trips and contactors.
• You can use the fixing clamps supplied
with the appliance to install it in a worktop with a minimum thickness of 42 mm.
With thinner worktops you must use a
spacer (not supplied with the appliance).
TO ATTACH THE SEAL.
• Clean the worktop in the area of the cut
out section.
• Bond the seal stripe supplied on the lower edge of the appliance along the outer
4 electrolux
edge of the glass ceramic. Do not extend
it. Let stay the cut ends in the middle of
one side. When, you cut it to length (add
some mm), push the two ends together.
TO ATTACH THE SEAL TO THE
RABBET
• Clean the rabbet in the work surface.
• Bond the seal stripe supplied on the upper surface of the rabbet along the edges
of the cut out section.
ASSEMBLY
• Cut the seal stripe into four pieces in relation to the length of the edges of the rabbet.
• For the four corners of the rabbet the
ends of the seal stripes must be cut into
mitres. Do not bond the ends over one
another.
• Bond the seal stripe flush into the corner
of the rabbet. Make sure that no silicon
compound can get below the appliance
when grouting.
min.
500mm
min.
50mm
min.
50mm
min.
5mm
x4
x4
R 5mm
600mm
490
+1
mm
=
360+1mm
=
electrolux 5
min. 20 mm
BUILT-IN INSTALLATION
R10mm
R5mm
8mm
13mm
+1
360
mm
490+1
mm
+1
516
mm
min. 600mm
+1
386
mm
<36mm
≥36mm
min.
30 mm
min.
5 mm
min.
20 mm
<36mm
≥36mm
min.
25 mm
min.
5 mm
6 electrolux
PRODUCT DESCRIPTION
COOKING SURFACE LAYOUT
300 mm
CONTROL PANEL LAYOUT.
1 2 3 54 6 7 8
Induction Wok niche 2300 W, with
1
1
Power function 3200 W
Control panel
2
2
91112 10
Use the sensor fields to operate the appliance. The displays, indicators and
sounds shows which function operate.
sensor field function
1
2
3
the timer display It shows the time in minutes.
4
5
6
a heat setting display It shows the heat setting.
7
8
9
It activates and deactivates the appliance.
It locks/unlocks the control panel.
To set the Timer functions.
It shows that the Count Up Timer function operates (1 to 59 minutes).
It shows that the Count Down Timer operates (1 to
99 minutes). or shows that Minute Minder operates.
It activates the "continue simmering" mode.
It activates the Power function.
sensor field function
a control bar To set the heat setting.
10
11
12
/
It increases or decreases the time.
It activates and deactivates STOP+GO.
HEAT SETTING DISPLAYS
Display Description
The cooking zone is deactivated.
-
+ digit
/ /
3 STEP RESIDUAL HEAT INDICATOR
Warning! \ \ Risk of burns
The cooking zone operates.
Keep Warm / The function operates.
Power function operates.
There is a malfunction.
3 step Residual heat indicator: continue cook / stay warm / residual
heat.
Lock/The Child Safety functions operates.
Not correct cookware or too small or no cookware on the cooking
zone.
The Automatic Switch Off function operates.
• 390 mm , 6 litres
• With 2 handles
from residual heat!
3 step Residual heat indicator indicates the
level of the residual heat. The induction
cooking zones make the heat necessary for
cooking directly in the bottom of the cookware. The glass ceramic is heated by the
heat of the cookware.
electrolux 7
ACCESSORIES
The WOK pan P 6.0 stainless steel
(supplied)
DG39 Pan cover (special accessory)
• 390 mm, stainless steel
A39 Tempura rack (special accessory)
• 390 mm, semi circular, stainless steel
00- 99
8 electrolux
OPERATING INSTRUCTIONS
ON AND OFF
Touch
appliance.
AUTOMATIC SWITCH OFF
The function stops the hob
automatically if:
• all cooking zones are off.
• you do not set the heat setting after you
• you cover a sensor field with an object (a
Automatic Switch Off times
THE HEAT SETTING
Touch the control bar at the heat setting.
Change to the left or the right, if it is necessary. Do not release before you have a correct heat setting. The display shows the
heat setting.
SWITCHING THE POWER FUNCTION
ON AND OFF
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 5 minutes at most. After that the induction
cooking zone automatically switches back
to heat setting 14. To switch on, touch
setting
TIMER
You can select the timer function with
The Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time. It deaktivates the cooking zone automatically after the time you set.
for 1 second to start or stop the
start the hob.
pan, a cloth, etc.) for longer than 10 sec-
Heat setting
Stops after
comes on. To switch off, touch a heat
- .
- - - -
6 hours 5 hours 4 hours 1.5 hours
P
.
onds. The sound operates until you remove the object.
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob
again, the cooking zone must be cool.
•
you use incorrect cookware.
on and after 2 minutes the cooking zone
stops automatically.
• you do not stop a cooking zone or
change the heat setting. After some time
comes on and the hob stops. See the
table.
The selection of Count Down Timer
function is possible when the cooking
zone is activated and the heat setting is
set.
When this function is activated,
comes on.
To activate of the Count Down Timer:
•
touch
cooking zone starts to flash slow, the
time counts down.
•
To see the remaining time: touch
again and again, until comes on. The
display shows the remaining time.
To change the Count Down Tim-
•
er:touch
comes on and then touch or .
• To deactivate the Count Down Timer:
touch
on and then touch
,
time counts back to
When the timer countdown comes to an
end, the sound operates and
The cooking zone deactivates.
•
To deactivate the sound: touch
The Count Up Timer
Use the Count Up Timer to monitor how
long the cooking zone operates.
•
When this function is activated,
comes on.
To activate the Count Up Timer:
•
of the timer to set the time (
minutes). When the indicator of the
again and again, until
again and again, until comes
. The remaining
.
00
00
comes
flashes.
00
electrolux 9
Touch
The symbol goes out and comes
on.
To see how long the cooking zone
•
operates: touch
til
comes on. The display shows the
time that the zone operates.
To deactivate the Count Up Timer:
•
touch
on and touch
out and
• To reset the Count Up Timer: touch
The Minute minder.
You can use the timer as a minute minder
while the cooking zones do not operate.
Touch
Touch or of the timer to set the time.
When the time comes to an end , the
sound operates and
•
To stop the sound: touch
STOP+GO
The
operate to the lowest heat setting - Keep
Warm (
When
heat setting.
The
function.
•
To activate this function touch
symbol
•
To deactivate this function touch
The heat setting that you set before
comes on.
LOCK
You can lock the control panel, but not
It prevents an accidental change of the heat
setting.
First set the heat setting.
To start this function touch
comes on for 4 seconds.
again and again, until comes
comes on.
. The time counts back to 00 .
When the two Timer functions operate
at the same time, the display shows
the Count Up Timer first.
function sets all cooking zones that
).
operates, you cannot change the
function does not stop the timer
comes on.
again and again, un-
. The symbol goes
flashes.
. The
.
. The symbol
The Timer stays on.
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also stop
this function.
THE CHILD SAFETY DEVICE
This function prevents an accidental operation of the hob.
Starting the child safety device
•
Start the hob with
heat settings.
•
Touch
comes on.
•
Stop the hob with
Switching off the child safety device
•
Start the hob with
heat settings. Touch
The symbol
•
Stop the hob with
Overriding the child safety device for
one cooking session
•
Start the hob with
comes on.
•
Touch
setting in less than 10 seconds. You
can operate the hob.
•
When you stop the hob with
child safety device operates again.
DEACTIVATION AND ACTIVATION OF
THE SOUNDS
Deactivate the appliance.
Touch
on and come down. Touch
onds.
, comes on, the sound is off.
Touch
When the sounds are off, you can hear
sounds only when:
•
you touch
.
• the Minute Minder comes down,
• the Count Down Timer comes down,
• you put something on the control panel.
for 4 seconds. The symbol
comes on.
for 4 seconds. Set the heat
for 3 seconds. The displays come
comes on, the sound is on. Touch
again to activate the sounds.
,
. The heat
. Do not set the
.
. Do not set the
for 4 seconds.
.
. The symbol
for 3 sec-
, the
10 electrolux
HELPFUL HINTS AND TIPS
Use the appliance only with original
Wok with round bottom.
Warning! Safe operation of the
appliance in accordance with EN60335
can only be guaranteed with the wok
pan supplied with it. Cookware with a
flat bottom must not be used.
COOKWARE FOR INDUCTION WOK
Important! In induction cooking a powerful
electromagnetic field generates an almost
instant heat inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, a multi-layer bottom
(marked as correct by a manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct if …
• ... some water boils very quickly on a
zone set to the highest heat setting..
• ... a magnet pulls on to the bottom of the
cookware.
THE WOK USE
• Put the wok pan into the wok niche carefully. If used carelessly, the handle can hit
the glass-ceramic surface and damage it.
• Do not shake the wok pan while it is in
the wok niche. The handle can scratch or
cause other damage to the glass-ceramic surface.
THE NOISES DURING OPERATION
If you can hear
• crack noise: cookware is made of different materials (Sandwich construction).
• whistle sound: you use the cooking zone
with high power levels and the cookware
is made of different materials (Sandwich
construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to appliance malfunction.
ENERGY SAVING
• If possible, always put the lids on the
cookware.
•Put cookware on a cooking zone before you start it.
AUTOMATIC USE OF RESIDUAL HEAT
To save the energy, the heater of the
cooking zone switches itself off earlier
than count down timer signal. The
heating time reduction depends on
cooking time.
THE TIPS FOR COOKING WITH THE
WOK
The induction wok is best for preparing "a
la minute" dishes, in particular Chinese specialities. The food is continuously turned
during the short frying time. The induction
heating system means that in the wok you
can cook very quickly and at high heat. As
a result meat and fish stay succulent and
vegetables keep their colour, taste and vitamins.
Warning! Take care! Risks of burns
from overheated fats and oils.
The induction wok has - specially at the
heat setting 9 and above - a high power with very fast reaction time. Fat and
oil become too hot very quickly. When
it starts to smoke, it is too hot.
When cooking with fat or oil do not
leave the appliance unattended.
With small quantity of food / oil use the
Power function only for a short time. If
not, there is the risk of damage to the
wok pan.
The frying temperature can be estimated by testing with a wooden spoon.
Hold the handle of a wooden spoon in
the hot fat:
– If small bubbles rise to the surface,
the frying temperature has been
reached.
– If there are no bubbles, the frying
temperature has not yet been
reached.
COOKING METHODS FOR THE WOK
Stir-frying
• Swirl the wok with oil.
• Cut the ingredients into small pieces. Add
sauces and seasonings and quickly fry
electrolux 11
over a high heat while stirring continuously.
• The cooking time is very short. Make
sure that the ingredients are prepared
before you start cooking.
• Start with the ingredients with the longest
cooking time.
• Stir-frying is a very healthy cooking method.
• Vegetables keep their taste and colour,
and stay nice and crunchy.
• Small pieces of meat stay tender.
Deep-frying
• The wok provides a very small drop in
temperature and low oil consumption.
• Because of the constant temperature the
fried food does not absorb much fat.
• Meat, fish, potatoes, vegetables, etc.
keep an even colour and crust, and thus
also the usual taste.
• Only use fats that are specially intended
for deep-frying.
Poaching / Whipping
• The curved shape of the wok is suitable
for whipping up custards, sabayons, butter sauces, fatless sponge or parfait mixtures without a bain marie at 65° C to
80° C.
Simmering
• Boiling: to cook food (for example spaghetti) at the boiling point.
• Simmering: to cook food (for example
dumplings) just under the boiling point.
Stewing
• Cook the food in its own juice, or add of
a little fat and other liquid.
• Use this method to cook food with a high
water content (such as vegetables, fish
and fruit) with a lid on over moderate
heat, to keep the flavour.
Steaming
• This is a gentle cooking method, which
keeps a high level of the food’s nutrient
content and colour.
• Using fats and oils
When the temperature is too high, the fat
begins to smoke (so-called “smoking
point”)
Fats / Oils Max. tem-
Butter 130 150
Pork fat 170 200
Beef fat 180 210
Olive oil 180 200
Sunflower oil 200 220
Groundnut
oil
Coconut oil 200 240
perature
(°C)
200 235
Smoking
point (°C)
The Power function is suitable for heating
large quantities of water.
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus,
we recommend that you cook at the lowest
temperatures and do not brown food too
much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the appliance operates.
To remove the dirt:
1. – Remove immediately:melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to
the appliance. Use a special scraper
for the glass .
Remove after the appliance is
–
sufficiently cool:limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic or stainless
steel.
12 electrolux
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
CLEANING THE WOK PAN (WOK P6)
• Clean the wok pan thoroughly inside and
out with washing up liquid after every
use.
WHAT TO DO IF…
Problem Possible cause and remedy
You cannot activate the appliance or operate it.
A sound operates when the appliance is deactivated.
The residual heat indicator
does not come on.
The heat setting changes between two heat settings.
A sound operates and appliance activates and deactivates
again. After 5 seconds one
more sound operates.
comes on
comes on
and number come on.
comes on
There is no signal when you
touch the panel sensor fields.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the control panel
• Activate the appliance again and set the heat setting in 7 seconds.
• The child safety device or the lock or Stop+Go operates. See
the chapter Operating the appliance.
You put something on one or more sensor fields. Remove the object from the sensor fields.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the service centre.
The Power management is activated. See the section Power
management.
You put something . Remove the object from the sensor field.
• The Automatic Switch Off operates. Deactivate the appliance
and activate it again.
• No cookware on the cooking zone. Put cookware on the cooking zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for the
cooking zone. Move cookware to a smaller cooking zone.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If
tre.
There is an error in the appliance, because a cookware boils dry.
The protection against become too hot for the cooking zone operates. The Automatic Switch Off operates.
Deactivate the appliance. Remove the hot cookware. After, ap-
proximately 30 seconds activate the cooking zone again.
should go out of the display, residual heat indicator can stay. Let
the cookware become sufficiently cool and check it with the section Cookware for the induction cooking zone.
The signals are deactivated.
Activate the signals (see OffSound Control ).
• Soften heavy deposits with hot water. If
necessary, clean with a commercially
available chromium steel cleaner and a
sponge.
• Blue discolourations, limescale stains or
protein stains are best removed with vinegar or lime juice.
comes on again, speak to the service cen-
electrolux 13
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the Customer Care Department. Give the
data from the rating plate, three-digit-letter
code for the glass ceramic (it is in the corner of the cooking surface) and an error
message that comes on.
ENVIRONMENT CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
If you operated the appliance incorrectly,
the servicing by a customer service technician or dealer will not be free of charge,
even during the warranty period. The instructions about the customer service and
conditions of guarantee are in the guarantee booklet.
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
PACKAGING MATERIAL
The packaging materials are friendly to
the environment and can be recycled.
The plastic components are identified
by marking: >PE<,>PS<, etc. Discard
the packaging materials as household
waste at the waste disposal facilities in
your municipality.
14 electrolux
electrolux 15
www.electrolux.com/shop
892947893-F-322011
Loading...