AEG-Electrolux WASL2E100 User Manual

User manual

Wasching machine

WA SL2 E100

Welcome to the world of Electrolux

Thank you for choosing a first class product from Electrolux, which
hopefully will provide you with lots of pleasure in the future. The
Electrolux ambition is to offer a wide variety of quality products that
make your life more comfortable. You find some examples on the cover in
this manual. Please take a few minutes to study this manual so that you
can take advantage of the benefits of your new machine. We promise that
it will provide a superior User Experience delivering Ease-of-Mind. Good
luck!

3

The following symbols are used in this manual:

Important information concerning your personal safety and information on
how to avoid damaging the appliance

General information and tips

Environmental information

Contents

4

Contents

Instruction booklet 7

Safety information 7

Product Description 10

Detergent dispenser drawer 10

Control panel 11

Display 11

First use 14

Personalization 14

Acoustic signal 14
Child safety lock 14

Daily use 15

Load the laundry 15
Measure out the detergent and the fabric softener 15
Select the required programme by means of programme selector dial 16
Select the temperature 16
Select the Spin speed, Rinse Hold or Night Cycle option 16
Selected the desired option 17
Prewash option 17
Stain option 18
Sensitive option 18
Select an additional rinse 18
Time Saving option 18
Select the Start/Pause 19
Select the Delay Start 19
Altering an option or a running programme 20
Interrupting a programme 20

Contents

Cancelling a programme 20
Opening the door after the programme has started 20
At the end of the programme 21

Washing programmes 22

Programme information 25

Preparing the wash cycle 27

Sorting the laundry 27
Temperatures 27
Before loading the laundry 27
Maximum loads 28
Laundry weights 28
Removing stains 28
Detergents and additives 29
Quantity of detergent to be used 30
Degrees of water hardness 30

5

Care and cleaning 31

Descaling 31
After each wash 31
External cleaning 31
Detergent dispenser drawer 31
Drain pump 32
Water inlet filter 34
Frost precautions 34
Emergency emptying out 34

What to do if... 36

Technical Data 39

Consumption value 40

Contents

6

Installation 41

Unpacking 41
Positioning and levelling 43
Water inlet 43
Water-stop device 44
Water drainage 44
Electrical connection 45
Permanent connection 45

Enviroment concerns 46

Packaging materials 46
Old machine 46
Ecological hints 46

Guarantee 47-49

Customer service centres 50

Instruction booklet

Safety information

Prior to using for the first time

• The safety of ELECTROLUX appliances complies with the industry standards
and with legal requirements on the safety of appliances. However, as
manufacturers, we feel it is our duty to provide the following safety notes.
You MUST read them carefully before installing or using the appliance.

• It is most important that this instruction book should be retained with the
appliance for future reference. Should the appliance be sold or transferred to
another owner, or should you move house and leave the appliance, always
ensure that the book is supplied with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant
warnings.

• You MUST read them carefully before installing or using the appliance.

• Before first starting up, check the machine for any damage incurred during
transport. Never connect up a damaged machine. If parts are damaged,
contact your supplier.

• If the appliance is delivered in the winter months when there are minus
temperatures: Store the washing machine at room temperature for 24 hours
before using for the first time.

Safety information

7

General safety

• It is dangerous to alter the specifications or attempt to modify this product in
any way.

• During high temperature wash programmes the door glass may get hot. Do
not touch it!

• Make sure that small pets do not climb into the drum. To avoid this, please
check into the drum before using.

• Any objects such as coins, safety pins, nails, screws, stones or any other hard,
sharp material can cause extensive damage and must not be placed into the
machine.

• Only use the advised quantities of fabric softener and detergent. Damage to
the fabric can ensue if you over-fill. Refer to the manufacturer’s
recommendations of quantities.

• Wash small items such as socks, laces, washable belts etc in a washing bag or
pillow case as it is possible for such items to slip down between the tub and
the inner drum.

Safety information

8

• Do not use your washing machine to wash articles with whalebones, material
without hems or torn material.

• Always unplug the appliance and turn off the water supply after use, clean
and maintenance.

• This appliance is provided with a white drum light. It is class 1, in accordance
with IEC 60825-1:1993 + A1:1997 + A2:2001 standard. Should the appliance
drum light need to be replaced, this must be carried out by a Service Centre.

• Under no circumstances should you attempt to repair the machine yourself.
Repairs carried out by inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Centre. Always insist on genuine
spare parts.

Installation

• When unpacking the appliance, check that it is not damaged. If in doubt, do
not use it and contact the Service Centre.

• All packing and transit bolts must be removed before use. Serious damage can
occur to the product and to property if this is not adhered to. See relevant
section in the user manual.

• After having installed the appliance, check that it is not pressing or standing on
its electrical supply cable, inlet hose and drain hose.

• If the machine is situated on a carpeted floor, please adjust the feet in order to
allow air to circulate freely

• Always be sure, that there is no water leakage from hoses and their connections
after the installation.

• If the appliance is installed in a location subject to frost, please read the

ddaannggeerrss ooff ffrreeeezziinngg

“

• Any plumbing work required to install this appliance should be carried out by a
qualified plumber or competent person.

• Any electrical work required to install this appliance should be carried out by a
qualified electrician or competent person.

” chapter.

Use

• This appliance is designed for domestic use. It must not be used for purposes
other than those for which it was designed.

• Only wash fabrics which are designed to be machine washed. Follow the
instructions on each garment label.

• Do not overload the appliance. See the relevant section in the user manual.

• Before washing, ensure that all pockets are empty and buttons and zips are
fastened. Avoid washing frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras must NOT be machine
washed.

• Garments which have been in contact with volatile petroleum products should
not be machine washed. If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the garment before placing in
the machine.

• Never pull the power supply cable to remove the plug from the socket; always
take hold of the plug itself.

• Never use the washing machine if the power supply cable, the control panel,
the working surface or the base are damaged so that the inside of the washing
machine is accessible.

Child Safety

• This appliance is not intended for use by person (including children) with
reduced physical sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

• This washing machine is not intended for use by young children or infirm
persons without supervision.

• Young children should be supervised to ensure that they do not play with the
appliance.

• The packaging components (e.g. plastic film, polystyrene) can be dangerous to
children - danger of suffocation! Keep them out of children’s reach.

• Keep all detergents in a safe place out of children’s reach.

• Make sure that children or pets do not
climb into the drum. To avoid this the
machine incorporates special feature. To
activate this device, rotate the button
(without pressing it) inside the door
clockwise until the groove is horizontal.
If necessary use a coin. To disable this
device and restore the possibility of
closing the door, rotate the button anti­clockwise until the groove is vertical.

Safety information

9

Product description

10

Product description

Your new appliance meets all modern requirements for effective treatment of
laundry with low water, energy and detergent consumption.

Detergent dispenser drawer

1

Control panel

2
3

Drum light

4

Door opening handle

Detergent dispenser drawer

Compartment for detergent used for prewash. The prewash detergent is
added at the beginning of the wash programme.

Compartment for powder or liquid detergent used for main wash. If you
are using water softener, add it to main wash detergent in the left-hand
compartment.
Compartment for liquid additives (fabric softener, starch).
Compartment for stain remover used for main wash with STAIN-option.

Rating plate

5

Drain pump

6
7

Three adjustable feet; The rear
foot on the left-hand side is
automatic

Control panel

Control panel

Henceforth the programme selector dial, the buttons and the display will be
indicated with the numbers given in this table.

9

11

1

Programme selector dial

1
2

TEMPERATURE button
(Temperatur Temp.)

3

SPIN REDUCTION button
(U/Min Essorage)

4

OPTIONS button (Options)

5

OK button

2 3 4 5 6

TIME SAVING button

6

(Zeitsparen Temps)

7

START/PAUSE button
(Start/Pause Départ/Pause)

DELAY START button

8

(Zeitvorwahl Départ Différé)

9

Display

7 8

Display

12

Display (9)

1

2

3

9

4 5 6 7 8

9.1

Temperature indicator and COLD symbol

9.2

Spin Speed indicator, RINSE HOLD , NIGHT CYCLE - symbols

9.3

Programme progress display: PREWASH , MAIN WASH , RINSE , SPIN
, DRAIN , OVERDOSAGE
The programme progress display shows the washing phases of the selected

programme.
During a washing cycle, a black line blinks under the washing phase symbol of

the running programme. At the end of each washing phase, the line under the
corresponding symbol becomes fixed.

If the OVERDOSAGE symbol lights up at the end of the programme, it indicates
that too much detergent has been used.

9.4

Options: PREWASH , STAIN , SENSITIVE , EXTRA RINSE

9.5

DOOR - symbol (Door locked)
This symbol indicates if the door can be opened:

● the symbol is on: the door cannot be opened. The appliance is performing a

washing programme.

● the symbol is off: the door can be opened. The washing programme is

finished.

9.6

TIME SAVING - option symbol

DISPLAY

9.7

The display shows the following information:

Duration of the selected programme

After selecting a programme, the duration is displayed in hours and minutes (for
example
maximum recommended load for each type of fabric.

After the programme has started, the time remaining is updated every minute.

2.05). The duration is calculated automatically on the basis of the

Delay start

The selected delay (20 hours max) set by means of the relevant button appears
on the display for about 3 seconds (for example
previously selected programme is displayed.

The DELAY START symbol will appear on the display.
The delay time value decreases by one unit every hour and then, when remains 1

hour, the time decreases every minute.

90’), then the duration of the

Incorrect option selection

If an option which is not compatible with the set wash programme is selected,
the message Err is displayed for about 2 seconds and the yellow light of button

7 starts blinking.

Display

13

Alarm codes

In the event of operating problems, some alarm codes can be displayed, for
example

E20 (see chapter «What to do if...»).

End of the programme

When the programme has finished a blinking zero 0 is displayed, the DOOR
symbol disappears and the door can be opened.

9.8

DELAY START - symbol

9.9

CHILD SAFETY LOCK - symbol

Use

14

First Use

Ensure that the electrical and water connections comply with the installation
instructions.

Remove the polystyrene block and any material from the drum.
Run a cotton cycle at 95°C, without any laundry in the machine, to remove any

manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent
into the dispenser drawer and start the machine.

Personalization

Acoustic signals

The machine is provided with the acoustic device, which sounds in the following
cases:

● at the end of the cycle

● in the event of operating problems

By pressing the
acoustic signal is deactivated (except for the events of operating problems).

By pressing these two buttons again, the acoustic signal is reactivated.

3 and 4 buttons simultaneously for about 6 seconds, the

Child safety lock

This device permits you to leave the appliance unsupervised without having the
worry that children might be injured by or cause damage to the appliance.

This function remains able also when the washing machine is not working.
There are two different ways to set this option:

● before pressing the button 7: it will be impossible to start the machine.

● after pressing the button 7 it will be impossible to change any other

programme or option.

To enable (disable) this option press simoultaneously for about 6 seconds

5 buttons until the CHILD SAFETY LOCK symbol appears (disappears) on (from)

the display.

4 and

Daily Use

Load the laundry

1. Open the door by carefully pulling the door
handle outwards. Place the laundry in the drum,
one item at a time, shaking them out as much
as possible.

2. Close firmly the door. You must hear a click
during closing.
Attention! Do not embed the laundry
between the door and the rubber joint.

Measure out the detergent and the fabric softener

Your new appliance was designed to reduce
water, energy and detergent consumption.

1. Pull out the dispenser drawer until it
stops. Measure out the amount of
detergent required, pour it into the main
wash compartment and, if you wish
to carry out the prewash phase, pour
the detergent into the compartment
marked . If you wish to perform the
stain function , pour the stain remover
into the compartment .

Use

15

2. If required, pour fabric softener into the
compartment marked (the amount
used must not exceed the MAX mark in
the drawer). Close the drawer gently.

Use

16

Select the required programme by means of programme selector
dial (1)

You can choose the right programme for any type of laundry following the
descriptions on the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme
selector determines the type of washing cycle (e.g. water level, drum movement,
number of rinses) and the washing temperature according to the type of laundry.

The pilot light of button
the selected programme.

The selector dial can be turned either clockwise or anticlockwise.
Position O

At the end of the programme the selector dial must be turned to
position O, to switch the machine off.

For the description of each washing programmes of the selector dial, consult the
chapter «Washing programmes».

Attention!

If you turn the programme selector dial to another programme when the machine

is working, the yellow pilot light of button
Err is displayed on the display to indicate a wrong selection. The machine will not
perform the new selected programme.

(Aus Arrêt)= Reset programme/Switching OFF of the machine.

7 starts blinking and the display shows the duration of

7 will blink 3 times and the message

Select the temperature (button 2)

Press this button repeatedly to increase or decrease the temperature, if you want
your laundry to be washed at a temperature different from the one proposed by
the washing machine.

The maximum temperatures for each washing programme can be checked in the
paragraph «Washing programmes».

The symbol of cold wash corresponds to ().

Select the spin speed, NIGHT CYCLE or RINSE HOLD option
(button 3)

When the required programme has been selected, your appliance automatically
proposes the maximum spin speed provided for that programme.

Press this button repeatedly to change the spin speed, if you want your laundry
to be spun at a speed different from the one proposed by the washing machine.

For the maximum spin speed forseen for each programme consult the chapter
«Washing programmes».

Use

17

RINSE HOLD: by selecting this option the water of the last rinse is not emptied out
to prevent the fabrics from creasing. At the end of the programme,
HOLD symbol appear on the display, DOOR symbol (door locked) remains lit, the pilot
light of button
be emptied out.

NIGHT CYCLE: by selecting this option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed,
this washing cycle is very noiseless and it can be selected at night or in times with a
more economical power rate
with more water. At the end of the programme,
appear on the display, the DOOR symbol remains lit, the pilot light of button
goes off and the door is blocked to indicate that the water must be emptied out.

To empty out the water, please read chapter «At the end of the
porgramme».

7 goes off and the door is blocked to indicate that the water must

. In some programmes the rinses will be performed

0 and RINSE HOLD symbol

0 and RINSE

7

Select the desired option by means of button 4 and confirm your
choice by means of button 5

Depending on the programme, different functions can be combined.
Attention: Not all the options are compatible among themselves. The symbols of

the incompatible options disappear.
Anyway, if an option, which is not compatible with the set washing programme

or any other option, is selected, the Err message is displayed for few seconds
and the yellow pilot of button

You must select the options after you have selected the programme but before
pressing the button
display.

To scroll all the available options, press the button
appears on the display and starts blinking.

Press the button
under the selected symbol to indicate that this option has been set. Press the
same button to deactivate the option.

After selecting the options, wait about 10 seconds untill the display gets back to
the default status. The selected options appear on the display.

For the compatibility between this option and washing programmes consult the
chapter

«Washing programmes».

7. Press the button 4: all the option symbols appear on the

5 to activate and confirm your choice. A black dash appears

7 light starts blinking.

4. The corresponding symbol

Use

18

PREWASH option

Select this option if you wish your laundry to be prewashed at 30°C before the
main wash.

The Prewash ends with a short spin in programmes for COTTON and SYNTHETIC
fabrics, whereas in the programmes for DELICATE fabrics the water is only
drained. The relevant symbol will appear on the display.

STAIN option

Select this option to treat heavily soiled or stained laundry with stain remover
(extended main wash with time optimised stain action phase).

This option is not available with a temperature lower than 40°C.
Attention! If you wish to perform a programme with the stain option, pour stain

remover into compartment .

SENSITIVE option

By selecting this button the washing intensity will be reduced. The machine adds
one rinse in the programmes for COTTONS and SYNTHETICS.

This option is non selectable with EXTRA RINSE option.
This option is recommended for non fast coloureds items and for frequently

washed items.

Select an additional rinse (EXTRA RINSE)

This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).

If you wish to activate this option permanently for every washing cycle, depress
simoultaneously
on the display. This option remains active permanently.
If you wish to cancel it depress the same buttons untill the symbol disappears.

2 and 3 for about 6 seconds: the symbol EXTRA RINSE appears

TIME SAVING option (button 6)

The washing machine proposes by default the washing cycle for «Normally soiled
laundry». The washing cycle can be shorted by means of this button.

By pressing this button you can select the following options:
DAILY: by pressing this button once, the corresponding symbol appears on the

display and you will be able to short the washing duration for «Daily soiled
laundry». The display will show the shorted washing time. To be used for daily
soiled laundry.

SUPER QUICK: by pressing this button twice, the corresponding symbol remains
alight on the display and you will be able to short the washing duration for
«lightly soiled laundry».

The display will show the shorted washing time. To be used for very lightly soiled
laundry only.

Press the START/PAUSE (button 7)

To start the selected programme, press the button 7; the corresponding red pilot
light stops blinking.

The DOOR symbol appears on the display to indicate that the appliance has started
operating and the door is locked.

To interrupt a programme which is running, press the button
red pilot light starts blinking.

To restart the programme from the point at which it was interrupted, press the
button

If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, the yellow pilot light of the button

times, the message Err is displayed for about 2 seconds.

7 again.

7: the corresponding

Use

19

7 blinks 3

Select the DELAY START by means of button 8

Before you start the programme, if you wish to delay the start, press the

button
The corresponding symbol will appear on the display
The selected delay time value (up to 20 hours) will appear on the display for

about 3 seconds, then the duration of the programme will appear again.
You must select this option after you have set the programme and before you

press the button
You can modify or cancel the delay time at any moment, before you press the

button
If you wish to add laundry in the machine during the delay time, press the

button
door can be opened. After you have closed the door, press the button

The washing programme can be delayed from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of 20 hours by means of this button.

Selecting the delayed start:

8 repeatedly, to select the desired delay.

7.

7.

7 to set the machine to pause. When the DOOR symbol disappears, the

● Select the programme and the required options;

● Select the delay start;

7 again.

Use

20

● Press button 7: the machine starts its hourly countdown. The programme will

start after the selected delay has expired.

Cancelling the delayed start:

● set the washing machine to PAUSE by pressing the button 7;

● press the button 8 until the symbol 0’ is displayed;

● press the button 7 again to start the programme.

The button

8 cannot be selected with DRAIN programme.

Altering an option or a running programme

It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
button

7.

Changing a running programme is possible only by resetting it. Turn the
programme selector dial to O and then to the new programme position. The
washing water in the tub will be not emptied out. Start the new programme by
depressing the button

7 again.

Interrupting a programme

Depress the button 7 to interrupt a programme which is running, the
corresponding light starts to . Depress the button again to restart the
programme.

Cancelling a programme

Turn the selector dial to O to cancel a programme which is running. Now you
can select a new programme.

Opening the door after the programme has started

First set the machine to pause by pressing the button 7.

● if the DOOR symbol disappears, the door can be opened.

● if the DOOR symbol doesn’t go off, it means that the machine is already

heating, that the water level is above the bottom edge of the door. In this
case the door cannot be opened.

● If you cannot open the door but you need to open it, you have to switch the

machine off by turning the selector dial to O. After some minutes the door
can be opened (pay attention to the water level and temperature!).

At the end of the programme

The machine stops automatically, the pilot light of button 77pilot light goes off,
a blinking
minutes.

If you have choosen a programme or an option that ends with water in the tub,

follow the below instruction to empty the water out

● turn the programme selector dial to O

● select the DRAINING or SPINNING programme

● reduce the spin speed if needed, by means of the relevant button

● press the button 7

● when the programme has finished the display shows a blinking 0. On the

Turn the programme selector dial to O to switch the machine off. Remove the
laundry from the drum and carefully check that the drum is empty.

If you do not intend to carry out another wash, close the water tap. Leave the
door open to prevent the formation of mildew and unpleasant smells.

0 appears on the display and the acoustic signal sounds for some

::

display the DOOR symbol disappears and the door can be opened.

Use

21

Washing programmes

22

Washing programmes

Programme/

Temperature

COTTONS

(Koch- und
Buntwäsche /
Blanc Couleurs)
95°C - COLD

HYGIENE
60°C

40-60 MIX
40°C

JEANS
60°C - COLD

SYNTHETICS
(Pflegeleicht /
Synthétiques)
60°C - COLD

EASY IRON
(Leichtbügeln
Plus / Repassage
facile plus)
60°C - COLD

TTyyppee ooff llaauunnddrryy

White and coloured
cotton (normally soiled

cotton items)

Special programme for
white cottons

Mixed fabrics

Special programme for
jeans, denim items

Synthetic or mixed
fabrics

Synthetic or mixed
fabrics

Options

Spin reduction/Rinse

hold/Night cycle

Prewash - Stain (*)-

Sensitive - Extra rinse

Time saving

Spin reduction/Rinse

hold

Prewash - Stain

Spin reduction/Rinse

hold/Night cycle

Prewash - Stain -

Sensitive - Extra rinse

Spin reduction/Rinse

hold/Night cycle

Prewash

Spin reduction/Rinse

hold/Night cycle

Prewash - Stain (*) -

Sensitive - Extra rinse

Time saving

Spin reduction/Rinse

hold

Prewash - Extra rinse

Description of the

programme

Main wash, Rinses
Long spin at maximum
speed
Max Load Kg 7
** Red. Load Kg 3.5

Main wash/Rinses
Long spin at maximum
speed
Max Load Kg 7

Main wash/Rinses
Long spin at maximum
speed
Max Load Kg 7

Main wash
Rinses
Long spin at 1200 rpm
Max Load Kg 3.5

Main wash
Rinses
Short spin at 1200 rpm
Max Load Kg 3.5

Main wash
Rinses
Short spin at 1200 rpm
Max Load Kg 1

DELICATES
(Feinwäsche /
Linge Délicats)
40°C - COLD

Delicate fabrics: for
example curtains

Spin reduction/Rinse

hold/Night cycle

Prewash - Stain (*) -

Extra rinse

Time saving

Main wash
Rinses
Short spin at 1200 rpm
Max Load Kg 3.5

Washing programmes

Washing programmes

23

Programme/

Temperature

VISCOSE
(Viskose /
Viscose)
40°C - COLD

DELICATE
RINSES
(Feinspülen /
Rinçages
Délicats)

DRAIN
(Pumpen /
Vidange)

SPIN
(Schleudern /
Essorage)

DELICATE SPIN
(Schonschleudern
Essorage Délicat)

WOOL

(Handwash)

(Wolle plus /
Laine plus)
40°C - COLD

TTyyppee ooff llaauunnddrryy

Viscose items

Separate rinse cycle for
hand washed items

For emptying out the
water

Separate spin for cottons

Delicate spin for
woolens and synthetic,
delicate items

Garments bearing the
«Pure new wool, non­shrink, machine
washable» or
«Handwash» label

Options

Spin reduction/Rinse

hold/Night cycle

Prewash - Stain (*) -

Extra rinse

Spin reduction/Rinse

hold/Night cycle

Extra rinse

Spin reduction

Spin reduction

Spin reduction/Rinse

hold/Night cycle

Description of the

programme

Main wash
Rinses
Short spin at 1200 rpm
Max Load Kg 3.5

Rinses
Short spin at 1200 rpm
Max Load Kg 7

Drain
Max Load Kg 7

Drain and long spin at
maximum speed

Main wash
Rinses
Short spin at 1200 rpm
Max Load Kg 3.5

Main wash
Rinses
Short spin at 1200 rpm
Max Load Kg 2

LINGERIE
(Dessous /
Lingerie)
40°C - COLD

SILK
(Seide / Soie)
30°C - COLD

Special programme for
extremly delicate
handwashed garments

Silk items to be gentle
washed and spun

Spin reduction/Rinse

hold/Night cycle

Spin reduction/Rinse

hold/Night cycle

Main wash
Rinses
Short spin at 1200 rpm
Max Load Kg 1

Main wash
Rinses
Short spin at 1200 rpm
Max Load Kg 1

Washing programmes

24

Washing programmes

Programme/

Temperature

SPORT JACKETS
(Outdoor /
Blouson)
40°C - COLD

SPORT
INTENSIVE
(Sport Intensiv /
Sport)
40°C - COLD

20 MIN - 3 Kg
30°C

QUICK
INTENSIVE
(Schnell Intensiv
/ Intensif)
60°C - 40°C

TTyyppee ooff llaauunnddrryy

Special programme for
sport clothes

Special programme for
heavily soiled sportwear
items

For slightly soiled
fabrics, except wool

To use for cotton or
mixed fabrics, slightly
soiled or worn only
once.

Options

Spin reduction/Rinse

hold

Extra rinse

Spin reduction/Rinse

hold/Night cycle

Extra rinse

Spin reduction

Spin reduction/Rinse

hold

Extra rinse

DDeessccrriippttiioonn ooff tthhee

pprrooggrraammmmee

Main wash
Rinses

Short spin at 800 rpm
Max Load Kg 2.5

Prewash at 30°
Main wash
Rinses
Short spin at 1200 rpm

Max Load Kg 2.5

Main wash
Rinses

Short spin at 1200 rpm
Max Load Kg 3

Main wash
Rinses

Short spin at 1200 rpm
Max Load Kg 5

ECO
(Energiesparen /
Economique)
60°C

OOffff

O/

((AAuuss // AArrrrêêtt))

White and fast
coloured cotton ­economy, lightly-

normally soiled items,
shirts, underwear.

For cancelling the programme which is running
or to switch the machine off.

Spin reduction/Rinse

hold/Night cycle

Prewash - Stain (*) -

Sensitive - Extra rinse

Main wash
Rinses
Long spin at maximum
spin speed

Max Load Kg 7

* Stain option can be selected only at the temperature of 40°C or higher.
** If you Select the Super Quick Option by means of button TIME SAVING, we reco-

mend you, to reduce the maximum load as indicated. (Red.load=Reducted Load). Full
loading possible however with somewaht reduced cleaning results.

Programme information

The washing programme for white cottons. This program
eliminates the micro-organisms thanks to the washing by

HYGIENE

MIX 40-60

JEANS

EASY IRON

60°C and an additional rinse. In this way the action is more
effective. Put into the compartment STAIN a special
additive for hygiene and select the option STAIN.

Special programme for white and coloured cotton suitable
for different washing temperatures. This programme can be
used for laundry, which should be washed at 40°C or 60°C
separately. So, you can put into the drum the maximum
load capacity in order to save energy and water. You will
obtain the same good washing result as a normal
programme at 60°C.

With this programme it is possible to wash items like
pants, shirts or jackets in jeans and also jersey realized
with hi-tech materials. (The EXTRA RINSE option will be
activated automatically).

Selecting this programme the laundry is gently washed
and spun to avoid any creasing. In this way ironing is
easier. Furthermore the machine will perform additional
rinses.

Programme information

25

VISCOSE

BLANKET

WOOL
(HANDWASH)

LINGERIE

SILK

Special gentle programme for fabrics such a viskose, cupro,
lyocell. It performs an cleaning action more intensive than
the HANDWASH programme.

Washing programme for a single synthetic blanket,
bedspread etc.

Washing programme for machine washable wool as well
as for hand washable woollens and delicate fabrics with
the «hand washing» care symbol .

This programme is suitable for very delicate items, as lingerie,
bras and underwear etc.

Delicate washing programme suitable for silk and mixed
synthetic items.

Programme information

26

Programme information

SPORT JACKETS

SPORT INTENSIVE

20 MIN. - 3 Kg

QUICK INTENSIVE

ECO

DELICATE RINSES

DRAIN

Special program for sport clothes. By selecting this
program, do not add any additives.

This programme is suitable for washing heavily soiled sport
items. The machine will add automatically a prewash phase
before the main wash to eliminate mud stains. We
recommend you
compartent of the detergent drawer.

Special program at 30°C, duration - approx. 20 minutes,
ideal for laundry to be refreshed: e.g. a sport jacket worn
only once or slightly soiled or new garments.

Quick washing programme, to be used for lightly soiled
white/fast coloured cottons and mixed fabrics.

This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and the
washing time will be extended. This allows to obtain a
good washing efficiency by saving energy.

With this programme it is possible to rinse and spin
garments which have been washed by hand. The machine
performs 3 rinses, followed by a final long spin. The spin
speed can be reduced by relevant button.

For emptying out the water of the last rinse in
programmes with the RINSE HOLD and NIGHT CYCLE
option. Before selecting this programme the selector dial
must be turned to O.

NNOOTT

to put the detergent into the

SPIN

Separate spin for hand washed garments and after
programmes with the RINSE HOLD and NIGHT CYCLE
option. Before selecting this programme the selector dial
must be turned to O. You can choose the speed by means
of the relevant button to adapt it to the fabrics to be
spun.

Preparing the wash cycle

Preparing the wash cycle

Sorting out the laundry

Follow the wash code symbols on each garment label and the manufacturer’s
washing instructions. Sort the laundry as follows: whites, coloureds, synthetics,
delicates, woollens.

Temperatures

27

95° or 90°

60°/50°

40°-30°- Cold

for normally soiled white cottons and linen (e.g. tea cloths,
towels, tablecloths, sheets...).

for normally soiled, colour fast garments (e.g. shirts, night

dresses, pyjamas....) in linen, cotton or synthetic fibres and

for lightly soiled white cotton (e.g. underwear).

for delicate items (e.g. net curtains), mixed laundry including
synthetic fibres and woollens bearing the label «pure new
wool, machine washable, non-shrink».

Before loading the laundry

Never wash whites and coloureds together. Whites may lose their “whiteness” in
the wash.

New coloured items may run in the first wash; they should therefore be washed
separately the first time.

Make sure that no metal objects are left in the laundry (e.g. hair clips,
safety pins, pins).

Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or
long tapes.

Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks or tie them up in a bag or net.

Preparing the wash cycle

28

Maximum loads

Recommended loads are indicated in the washing programme charts.
General rules:

Cotton, linen: drum full but not too tightly packed;
Synthetics: drum no more than half full

;

Delicate fabrics and woollens: drum no more than one third full.
Washing a maximum load makes the most efficient use of water and energy.
For heavily soiled laundry, reduce the load size.
Washing a maximum load makes the most efficient use of water and energy. For

heavily soiled laundry, reduce the load size.

Laundry weights

The following weights are indicative:

bathrobe

1200 g

100 gnapkin
700 gquilt cover
500 gsheet
200 gpillow case
250 gtablecloth
200 gtowelling towel
100 gtea cloth
200 gnight dress
100 gladies’ briefs
600 gman’s work shirt
200 gman’s shirt
500 gman’s pyjamas
100 gblouse
100 gmen’s underpants

Removing stains

Stubborn stains may not be removed by just water and detergent. It is therefore
advisable to treat them prior to washing.

Blood: treat fresh stains with cold water. For dried stains, soak overnight in
water with a special detergent then rub in the soap and water.

Oil based paint::moisten with benzine stain remover, lay the garment on a soft

cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft

surface and dab the stain with the fingertips and a cotton cloth.

Preparing the wash cycle

Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be
careful with rust stains which are not recent since the cellulose structure will
already have been damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with acetone (*), lay the garment on a soft

cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains with methylated

spirits. Treat any residual marks with bleach.
Red wine: soak in water and detergent, rinse and treat with acetic or citric acid,

then rinse. Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the fabric first with acetone (*), then

with acetic acid; treat any residual marks on white fabrics with bleach and then
rinse thoroughly.

Tar stains: first treat with stain remover, methylated spirits or benzine, then rub
with detergent paste.

(*) do not use acetone on artificial silk.

Detergents and additives

Good washing results also depend on the choice of detergent and use of the
correct quantities to avoid waste and protect the environment.

Although biodegradable, detergents contain substances which, in large
quantities, can upset the delicate balance of nature.

The choice of detergent will depend on the type of fabric (delicates, woollens,
cottons, etc.), the colour, washing temperature and degree of soiling.

All commonly available washing machine detergents may be used in this
appliance:

• powder detergents for all types of fabric,

• powder detergents for delicate fabrics (60°C max) and woollens,

• liquid detergents, preferably for low temperature wash programmes (60°C
max) for all types of fabric, or special for woollens only.

The detergent and any additives must be placed in the appropriate
compartments of the dispenser drawer before starting the wash programme.

If using concentrated powder or liquid detergents, a programme without

prewash must be selected.
The washing machine incorporates a recirculation system which allows an

optimal use of the concentrated detergent.

29

Preparing the wash cycle

30

Pour liquid detergent into the dispenser drawer compartment marked just
before starting the programme.

Any fabric softener or starching additives must be poured into the compartment
marked before starting the wash programme.

Follow the product manufacturers’ recommendations on quantities to use and do

not exceed the «MAX» mark in the detergent dispenser drawer.

Quantity of detergent to be used

The type and quantity of detergent will depend on the type of fabric, load size,
degree of soiling and hardness of the water used.

Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:

• you are washing a small load,

• the laundry is lightly soiled,

• large amounts of foam form during washing. For the stain treatment before
the washing cycl, follow the product manufacturers’ instructions on
detergent quantities. If you use any specific product to remove the stains, you
must start the cycle of washing immediately .

Degrees of water hardness

Water hardness is classified in so-called “degrees” of hardness. Information on
hardness of the water in your area can be obtained from the relevant water
supply company, or from your local authority.

Note: A water softener must be added when water has a medium-high degree
of hardness (from degree of hardness II). Follow the manufacturer’s instructions.
The quantity of detergent can then always be adjusted to degree of hardness I (=
soft).

DDeeggrreeeess ooff wwaatteerr hhaarrddnneessss

LLeevveell

1
2 medium
3 hard
4 very hard

Characteristic

soft

GGeerrmmaann

°°ddHH

0-7 0-15

8-14 16-25

15-21 26-37

> 21 > 37

FFrreenncchh

°°TT..HH..

Care and cleaning

Care and cleaning

You must DISCONNECT the appliance from the electricity supply, before you can
carry out any cleaning or maintenance work.

Descaling

The water we use normally contains lime. It is a good idea to periodically use a
water softening powder in the machine. Do this separately from any laundry
washing, and according to the softening powder manufacturer's instructions.

This will help to prevent the formation of lime deposits.

After each wash

Leave the door open for a while. This helps to prevent mould and stagnant smells
forming inside the appliance. Keeping the door open after a wash will also help
to preserve the door seal.

Maintenance wash

With the use of low temperature washes it is possible to get a build up of
residues inside the drum.

We recommend that a maintenance wash be performed on a regular basis.
To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash programme.

• Use a normal measure of detergent, must be a powder with biological
properties

.

31

External cleaning

Clean the exterior cabinet of the appliance with soap and water only, and then
dry thoroughly.
Important! Do not use methylated spirits, solvents or similar products to clean
the cabinet.

Detergent dispenser drawer

The detergent dispenser drawer should be
cleaned regularly.

1. Remove the detergent dispenser drawer
by pulling it firmly.

Care and cleaning

32

2. Remove the conditioner insert from the middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it

will go, so that it is firmly in place.

5. Clean all parts of the washing ma­chine, especially the nozzles in the top
of the washing-in chamber, with a
brush.

6. Insert the detergent dispenser drawer in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the
washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless
steel.

2. Run a washing cycle without any washing to clean off any cleaning agent
residues. Programme: COTTONS/LINEN 90° or 95°C, press the button
approx. 1/4 measuring cup of detergent.

6, add

Door seal

Check from time to time the door seal and eliminate
eventual possible objects that could be trapped in the
fold.

Drain pump

The pump should be inspected regularly and particularly if

• the machine does not empty and/or spin

• the machine makes an unusual noise during draining due to objects such as
safety pins, coins etc. blocking the pump.

Proceed as follows:

1. Disconnect the appliance.

2. If necessary wait until the water has cooled down.

3. Open the pump door.

4. Place a container close to the pump to collect any spillage.

5. Release the emergency emptying hose,

place it in the container and remove its
cap.

6. When no more water comes out,
unscrew the pump and remove it.
Always keep a rag nearby to dry up
spillage of water when removing the
pump.

Care and cleaning

33

7. Remove any objects from the pump
impeller by rotating it.

Care and cleaning

34

8. Put the cap back on the emergency
emptying hose and place the latter
back in its seat.

9. Screw the pump fully in.

10. Close the pump door.

Warning!

When the appliance is in use and depending on the programme selected there
can be hot water in the pump. Never remove the pump cover during a wash
cycle, always wait until the appliance has finished the cycle, and is empty. When
replacing the cover, ensure it is securely retightened so as to stop leaks and
young children being able to remove it.

Water inlet filter

If you notice that the machine is taking longer to fill, check that the filter in
the water inlet hose is not blocked.

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff

brush.

4. Screw the hose back onto the tap.

Frost precautions

If the machine is installed in a place where the
temperature could drop below 0°C, proceed as follows:

1. Close the water tap and unscrew the water inlet hose from the tap.

2. Place the end of the emergency emptying hose and that of the inlet hose in a

bowl placed on the floor and let water drain out.

3. Screw the water inlet hose back on and reposition the emergency emptying
hose after having put the cap on again

By doing this, any water remaining in the machine is removed, avoiding ice
forming and consequently damage to the appliance.

When you use the machine again, make sure that the ambient temperature is
above 0°C.

.

Care and cleaning

Emergency emptying out

If the water is not discharged, proceed as follows to empty out the machine:

1. pull out the plug from the power socket;

2. close the water tap;

3. if necessary, wait until the water has cooled down;

4. open the pump door;

5. place a bowl on the floor and place the end of the emergency emptying hose

into the bowl. Remove its cap. The water should drain by gravity into the
bowl. When the bowl is full, put the cap back on the hose. Empty the bowl.
Repeat the procedure until water stops flowing out;

6. clean the pump if necessary as previously described;

7. replace the emergency emptying hose in its seat after having plugged it;

8. screw the pump again and close the door.

35

What to do if...

36

What to do if...

Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service Centre,
please carry out the checks listed below.

During machine operation it is possible that the
the following alarm codes appears on the display and at the same some acoustic signals
sound every 20 seconds to indicate that the machine is not working:

• E10 : problem with the water supply

• E20 : problem with the water draining

• E40 : door open.

• EF0 : Anti-flooding system has activated

Once the problem has been eliminated, press the button
after all checks, the problem persists, contact your local Service Centre.

Problem Possible cause/Solution

The door has not been closed. E40

• Close firmly the door.
The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.
There is no power at the socket.

• Please check your domestic electrical installation.

The washing machine does not
start:

The main fuse has blown.

• Replace the fuse.
The selector dial is not correctly positioned and the

button

• Please turn the selector dial and press the button

again.

The delay start has been selected.

• If the laundry is to be washed immediately, cancel

the delay start.

yyeellllooww

pilot light of button

77

to restart the programme. If

7 has not been depressed.

7 blinks, one of

7

The machine does not fill:

The water tap is closed. E10

• Open the water tap.

The inlet hose is squashed or kinked.

• Check the inlet hose connection.

The filter in the inlet hose is blocked.

• Clean the water inlet hose filter.

The door is not properly closed.

• Close firmly the door.

E40

E10

E10

What to do if...

Problem Possible cause/Solution

37

The machine fills then empties
immediately:

The machine does not empty
and/or does not spin:

There is water on the floor:

Unsatisfactory washing results:

The end of the drain hose is too low.

• Refer to relevant paragraph in «water drainage»

section.

The drain hose is squashed or kinked. E20

• Check the drain hose connection.

The drain filter is clogged.

• Clean the drain filter.

An option or a programme that ends with the water
still in the tub or a that eliminates all the spinning
phases has been selected.

• Disable the option.

• Select the draining or the spinning programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Too much detergent or unsuitable detergent (creates
too much foam) has been used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this as
the water runs down the hose; check to see if it is
damp.

• Check the water inlet hose connection.

The drain hose is damaged.

• Change it with a new one.

The cap on the filter has not been replaced or the
filter has not been proparly screwed in after cleaning
action.

• Put the cap back on the filter or screw the filter

fully in.

Too little detergent or unsuitable detergent has been
used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to
washing.

• Use commercial products to treat the stubborn

stains

.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Introduce into the drum less laundry.

E20

What to do if...

38

Problem Cause possible/Solution

The door will not open:

The machine vibrates or is noisy:

Spinning starts late or the machine
does not spin:

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

• Wait until the DOOR symbol disappears.

There is water in the drum.

• Select drain or spin programme to empty out the

water.

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The support feet have not been adjusted

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rotation
of the drum. This may happen several times before
the unbalance disappears and normal spinning can
resume. If, after some minutes, the laundry is still not
evenly distributed in the drum, the machine will not
spin.

• Redistribute the laundry.

The machine makes an unusual
noise

No water is visible in the drum:

The display shows the alarm code

::

EF0

The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a softer
start and more even distribution of the laundry in the
drum when spinning, as well as increased stability of
the machine.

Machines based on modern technology operate very
economically using very little water without affecting
performance.

Anti-flooding system has activated.

• Disconnect the appliance and contact the Service

Force Centre

What to do if...

Mod. ..........

Prod. No. ...........

Ser. No. .........

Mod. ..........

Prod. No. ...........

Ser. No. .........

P0042 BD

Problem Cause possible/Solution

The drum light doesn’t work: Please contact your local Service Centre.

If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.

Technical Data

39

Width

Dimensions

Height
Depth
(door included)

Electrical connection

Power supply voltage/frequency
Total power absorbed

220-230 V/50 Hz

Minimum fuse protection

Water supply pressure

Maximum Load

Minimum
Maximum

Cottons 7 kg

Spin Speed Maximum 1600 rpm

60 cm
85 cm
63 cm

2200 W

10 A

0,05 MPa
0,80 MPa

Consumption value

40

Consumption value

Programme

White Cottons 95° 62 2.1

Cottons 60° 67 1.7

(*)Cotton Economy 60° 45 1.19

Cottons 40° 45 1.3

Synthetics 60° 54 0.9

Delicates 40° 63 0.55

Wool/ Handwash 40° 62 0.4

Water consumption

(lltres)

Energy consumption

(KWh)

Programme duration

The consumption data shown on this chart is to be considered purely indicative,
as it may vary depending on the quantity and type of laundry, on the inlet water
temperature and on the ambient temperature.

(*) «Economy 60°C» with a load of 7 kg is the reference programme for the data
entered in the energy label, in compliance with EEC 92/75 standards.

(Minutes)

control panel.

to the display on the

For the duration of the

programmes, please refer

Installation

HEC0008

A

HEC00022

HEC0001

Unpacking

All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the

machine ever has to be transported again.

1. After removing all the packaging, carefully lay
machine on it’s back to remove the
polystyrene base from the bottom.

2. Remove the power supply cable and the
draining hose from the hose holders on the rear of the
appliance.

Installation

41

With a suitable spanner unscrew and remove the

3.

central rear bolt A.

Installation

C

C

B

D

HEC0003

B

C

C

HEC0023

E

HEC0010

HEC0005

42

4. Unscrew and remove the two large rear bolts B
and the six smaller bolts C.

5. Remove the bracket D and tighten up the six
smaller bolts C. Slide out the relevant plastic
spacer E.

6. Open the porthole, take out the inlet hose from the
drum and remove the polystyrene block fitted on the
door seal.

7. Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the bag
containing the instruction booklet.

8. Connect the water inlet hose as described under the
paragraph «Water inlet».

All the different plug caps are supplied with the appliance in
the plastic bag containing the instruction booklet.

Installation

Positioning and levelling

Install the machine on a flat hard floor.
Make sure that air circulation around the machine is

not impeded by carpets, rugs etc.
Before placing it on small tiles, apply a rubber

coating.
Never try to correct any unevenness in the floor by

putting pieces of wood, cardboard or similar
materials under the machine.

If it is impossible to avoid positioning the machine next to a gas cooker or coal­burning stove, an insulating panel covered with aluminium foil on the side facing
the cooker or stove, must be inserted between the two appliances.

The machine must not be installed in rooms where the temperature can drop
below 0.

The water inlet hose and the drain hose must not be kinked.
Please ensure that when the appliance is installed, it is easily accessible for the

engineer in the event of a breakdown.
Carefully level by screwing the adjustable feet in or out. Never place cardboard,

wood or similar materials under the machine to compensate for any unevenness
in the floor.

Automatic foot: The rear foot on the left-hand side of your washing machine is
built as a shock absorbing foot, which is why the appliance gives in the back left­hand corner if put under load. The automatic foot guarantees that the appliance
does not move even at high spin speeds. Basically the automatic foot does not
need to be set.

HEC007S

43

Water inlet

An inlet hose is supplied and can be found inside the machine drum.

Do not use the hose from your previous
machine to connect to the water supply.

This appliance must be connected to a cold
water supply.

1. Open the porthole and extract the inlet hose.

2. Connect the hose with the angled connection to

the machine.

Do not place the inlet hose downwards. Angle
the hose to the left or right depending on the position of your water
tap.

HEC0006

Installation

A

352

44

3. Set the hose correctly by loosening the ring nut.
After positioning the inlet hose, be sure to tighten

the ring nut again to prevent leaks.

4. Connect the hose to a tap with a 3/4” thread.
Always use the hose supplied with the appliance.

The inlet hose must not be lengthened. If it is too
short and you do not wish to move the tap, you
will have to purchase a new, longer hose specially
designed for this type of use.

Water-stop device

The inlet hose is provided with a water stop device,
which protects against damage caused by water leaks in
the hose which could develop due to natural ageing of
the hose. This fault is shown by a red sector in the
window “AA”. Should this occur, turn the water tap off
and refer to your Service Centre to replace the hose.

Water drainage

The end of the drain hose can be positioned in three ways:

Hooked over the edge of a sink using the plastic hose guide supplied
with the machine.

In this case, make sure the end cannot come
unhooked when the machine is emptying.

This could be done by tying it to the tap with a piece
of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm above
the ground.

Directly into a drain pipe at a height of not less than 60 cm and not more
than 90 cm.

The end of the drain hose must always be ventilated, i.e. the inside diameter of
the drain pipe must be larger than the outside diameter of the drain hose.

The drain hose must not be kinked.

Installation

P1118

Important!

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and
joining piece is available from your local Service Centre.

Electrical connection

Information on the electrical connection is given on the rating plate on the inner
edge of the appliance door and in the chapter «Technical Data».

Check that your domestic electrical installation can take the maximum load
required, also taking into account any other appliances in use.

45

Connect the machine to an earthed socket.

The manufacturer does not accept any responsibility for damage or
injury through failure to comply with the above safety precaution.

The power supply cable must be easily accessible after installing the
machine.

Should the appliance power supply cable need to be replaced, this must
be carried out by a Service Centre.

Permanent connection

In the case of a permanent connection it is necessary that you install a double pole
switch between the appliance and the electricity supply (mains), with a minimum
gap of 3 mm between the switch contacts and of a type suitable for the required
load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.
This operation must be performed by a qualified electricia

Environment concerns

46

Enviroment concerns

Packaging materials

The materials marked with the symbol are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them properly in

appropriate collection containers.

Old machine

Use authorised disposal sites for your old appliance. Help to keep your country tidy!

The symbol on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city office,
your household waste disposal service or the shop where you purchased the
product.

Ecological hints

To save water, energy and to help protect the environment, we recommend that
you follow these tips:

• Normally soiled laundry may be washed without prewashing in order to save

detergent, water and time (the environment is protected too!).

• The machine works more economically if it is fully loaded.

• With adequate pre-treatment, stains and limited soiling can be removed; the

laundry can then be washed at a lower temperature.

• Measure out detergent according to the water hardness, the degree of soiling

and the quantity of laundry being washed.

Guarantee

Garantie/Kundendienst, Garantie/service-clientèle,
Garanzia/Servizio clienti, Guarantee/Customer
Service Centres

47

Servicestellen Points de Service Servizio dopo

vendita

5506 Mägenwil/Zürich
Industriestrasse 10

9000 St.
GallenZürcherstrasse
204 e

4127 Birsfelden
Hauptstrasse 52

6020 Emmenbrücke
Seetalstrasse 11

7000 Chur
Comercialstrasse 19

3018 Bern
Morgenstrasse 131

1028 Préverenges Le
Trési 6

Point of Service

6916 Grancia Zona
Industriale E

Ersatzteilverkauf/Points de vente de rechange/Vendita pezzi di ricambio/
spare parts service:

5506 Mägenwil, Industriestrasse 10, Tel. [phone]

Fachberatung/Verkauf/Demonstration/Vente/Consulente (cucina)/Vendita

8048 Zürich, Badenerstrasse 587, Tel. [phone]

Garantie

Für jedes Produkt gewähren wir ab Verkauf bzw. Lieferdatum an den
Endverbraucher eine Garantie von 2 Jahren. (Ausweis durch Garantieschein,
Faktura oder Verkaufsbeleg). Die Garantieleistung umfasst die Kosten für Material,
Arbeits- und Reisezeit. Die Garantieleistung entfällt bei Nichtbeachtung der
Gebrauchsanweisung und Betriebs-vorschriften, unsachgerechter Installation,
sowie bei Beschädigung durch äussere Einflüsse, höhere Gewalt, Eingriffe Dritter
und Verwendung von Nicht-Original Teilen.

Garantie

Nous octroyons sur chaque produit 2 ans de garantie à partir de la date de livraison
ou de la mise en service au consommateur (documenté au moyen d’une facture,

Guarantee

48

d’un bon de garantie ou d’un justificatif d’achat). Notre garantie couvre les frais
de mains d’œuvres et de déplacement, ainsi que les pièces de rechange.
Les conditions de garantie ne sont pas valables en cas d’intervention d’un tiers non
autorisé, de l’emploi de pièces de rechange non originales, d’erreurs de maniement
ou d’installation dues à l’inobser-vation du mode d’emploi, et pour des dommages
causés par des influences extérieures ou de force majeure.

Garanzia

Per ogni prodotto concediamo una garanzia di 2 anni a partire dalla data di
consegna o dalla sua messa in funzione. (fa stato la data della fattura, del certificato
di garanzia o dello scontrino d’acquisto) Nella garanzia sono comprese le spese di
manodopera, di viaggio e del materiale. Dalla copertura sono esclusi il logoramento
ed i danni causati da agenti esterni, intervento di terzi, utilizzo di ricambi non
originali o dalla inosservanza delle prescrizioni d’istallazione ed istruzioni per l’uso.

Warranty

For each product we provide a two-year guarantee from the date of purchase or
delivery to the consumer (with a guarantee certificate, invoice or sales receipt
serving as proof). The guarantee covers the costs of materials, labour and travel.
The guarantee will lapse if the operating instructions and conditions of use are not
adhered to, if the product is incorrectly installed, or in the event of damage caused
by external influences, force majeure, intervention by third parties or the use of
non-genuine components.

European Guarantee

European Guarantee

This appliance is guaranteed by Electrolux in each of the countries listed at the
back of this user manual, for the period specified in the appliance guarantee
orotherwise by law. If you move from one of these countries to another of the
countries listed, the appliance guarantee will move with you subject to the
following qualifications:

• The appliance guarantee starts from the date you first purchased the appliance

which will be evidenced by production of a valid purchase document issued by
the seller of the appliance.

• The appliance guarantee is for the same period and to the same extent for

labour and parts as exists in your new country of residence for this particular
model or range of appliances.

• The appliance guarantee is personal to the original purchaser of the appliance

and cannot be transferred to another user.

• The appliance is installed and used in accordance with instructions issued by

Electrolux and is only used within the home, i.e. is not used for commercial
purposes.

• The appliance is installed in accordance with all relevant regulations in force

within your new country of residence.
The provisions of this European Guarantee do not affect any of the rights

granted to you by law.

49

Customer service centres

50

www.electrolux.com

à

Albania
Belgique/België/Belgien
Česká republika
Danmark
Deutschland

Eesti
España
France
Great Britain
Hellas
Hrvatska
Ireland
Italia
Latvija
Lituania
Luxembourg
Magyarország
Nederland
Norge
Österreich
Polska
Portugal
Romania
Schweiz-Suisse-Svizzera
Slovenija
Slovensko
Suomi
Sverige
Türkiye

Россия

 

35 5 4 261 450
[phone]
[phone]
[phone]
[phone]

[phone]
[phone]

www.electrolux.fr
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
[phone]
www.electrolux.fi
[phone]
[phone]
[phone]

Rr. Pjeter Bogdani Nr. 7 Tirane
Bergensesteenweg 719, 1502 Lembeek
Budějovická 3, Praha 4, 140 21
Sjællandsgade 2, 7000 Fredericia
Muggenhofer Str. 135, 90429 Nürnberg
Mustamäe tee 24, 10621 Tallinn
Carretera M-300, Km. 29,900 Alcalá de Henares Madrid

Addington Way, Luton, Bedfordshire LU4 9QQ
4, Limnou Str., 54627 Thessaloniki
Slavonska avenija 3, 10000 Zagreb
Longmile Road Dublin 12
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Kr. Barona iela 130/2, LV-1012, Riga
Verkiu,2 9, 09108 Vilnius, Lithuania
Rue de Bitbourg, 7, L-1273 Hamm
H-1142 Budapest XIV, Erzsébet királyné útja 87
Vennootsweg 1, 2404 CG - Alphen aan den Rijn
Risløkkvn. 2 , 0508 Oslo
Herziggasse 9, 1230 Wien
ul. Kolejowa 5/7, Warsaw
Quinta da Fonte - Edificio Gonçalves Zarco - Q35 -2774-518 Paço de Arcos
Str. Garii Progresului 2, S4, 040671 RO
Industriestrasse 10, CH-5506 Mägenwil
Tr aška 132, 1000 Ljubljana
Electrolux Slovakia s.r.o., Electrolux Domáce spotrebiče SK, Seberíniho 1, 821 03 Bratislava

Electrolux Service, S:t Göransgatan 143, S-105 45 Stockholm
Tarlabași caddesi no : 35 Taksim Istanbul

129090 Москва, Олимпийский проспект, 16, БЦ «Олимпик»

www.electrolux.ch

ANC number: 132 968 540-00-402007