AEG-Electrolux WAGL5S100 User Manual

Page 1
User Manual
Washing Machine
WAGL5S 100
Page 2
Page 3
electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine. We promise that it will provide a superior User Experience delivering Ease-of­Mind. Good luck!
Page 4
4 contents electrolux
Contents
Safety information..............................5
Product description ...........................7
Control panel.....................................8
Use..................................................11
Washing hints..................................16
Washing programmes......................19
Programme information ...................21
Care and cleaning ...........................22
What to do if....................................25
Technical data .................................29
Consumption values ........................30
Installation .......................................31
Environment concerns .....................34
The following symbols are used in this manual:
Important information concerning your personal safety and information on how to avoid damaging the appliance.
General information and tips
Environmental information
Page 5
safety information electrolux 5
Safety Information
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.
General safety
It is dangerous to alter the
specifications or attempt to modify this product in any way.
During high temperature wash
programmes the door glass may get hot. Do not touch it!
Make sure that small pets do not
climb into the drum. To avoid this, please check into the drum before using.
Any objects such as coins, safety
pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
Only use the advised quantities of
fabric softener and detergent. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.
Wash small items such as socks,
laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
Do not use your washing machine to
wash articles with whalebones, material without hems or torn material.
Always unplug the appliance and
turn off the water supply after use, clean and maintenance.
Under no circumstances should you
attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
This appliance is heavy. Care should
be taken when moving it.
When unpacking the appliance,
check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
All packing and transit bolts must be
removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.
After having installed the appliance,
check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable.
If the machine is situated on a
carpeted floor, please adjust the feet in order to allow air to circulate freely
Always be sure, that there is no
water leakage from hoses and their connections after the installation.
Page 6
6 electrolux safety information
If the appliance is installed in a
location subject to frost, please read the “dangers of freezing”chapter.
Any plumbing work required to install
this appliance should be carried out by a qualified plumber or competent person.
Any electrical work required to install
this appliance should be carried out by a qualified electrician or competent person.
Use
This appliance is designed for
domestic use. It must not be used for purposes other than those for which it was designed.
Only wash fabrics which are
designed to be machine washed. Follow the instructions on each garment label.
Do not overload the appliance. See
the relevant section in the user manual.
Before washing, ensure that all
pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
Garments which have been in
contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
Never pull the power supply cable to
remove the plug from the socket; always take hold of the plug itself.
Never use the washing machine if
the power supply cable, the control
panel, the working surface or the base are damaged so that the inside of the washing machine is accessible.
Child safety
This appliance is not intended for
use by person (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
The packaging components (e.g.
plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach
Keep all detergents in a safe place
out of children’s reach.
Make sure that children or pets do
not climb into the drum. To avoid this the machine incorporates special feature. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin.
P1131
To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.
Page 7
product description electrolux 7
EN003
Product description
Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.
The ECO valve system allows total use of detergent and reduces water consumption so saving energy.
1
Detergent dispenser drawer
2
Control panel
3
Door opening handle
4
Drain pump
5
Adjustable feet
1 2
3
Detergent dispenser drawer
Compartment for detergent used for prewash. The prewash detergent is added at the beginning of the wash programme.
Compartment for powder or liquid detergent used for main wash.
Compartment for liquid additives (fabric softener, starch)
4
5
Page 8
8 electrolux control panel
Control panel
Henceforth, the programme selector dial, the different buttons and the display will be indicated in all the book with the relevant numbers given in the table below.
1 2 3 4 6 7 85 10
9
1
Programme selector dial
2
Temperature button
3
Spin button
4
Easy Iron button
5
Extra Rinse button
Table of symbols
Cottons , Synthetics
Delicates
,
Lingerie ,Silk , Handwash ,
Special programmes
Cold
,
Rinse hold , Easy iron , Extra rinse , Delay
Time manager , Door locked
6
Delay Start button
7
Display
8
Start/Pause button
9
Door locked pilot light
10
Time Manger buttons
Spin , Drain , Rinses ,
,
Wool , Cottons Economy
, Child safety Lock
,
,
Page 9
Display (7)
control panel electrolux 9
7.4
7.1
Duration of selected programme/
After selecting a programme, the duration is displayed in hours and minutes (for example duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.
2.05). The
7.5
/Delayed start
The selected delay set by pressing the relevant button appears on the display for a few seconds, then the duration of the previously selected programme is displayed.
/Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example do if...»).
E20 (see chapter «What to
7.1
2.05
7.27.3
/Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for a few seconds and the integrated
red light of button
/End of programme
When the programme has finished three blinking zeros the pilot light 9 and the pilot light of button 8 go out and the door can be opened.
7.2
Washing phase icons
By selecting the wash programme, the washing programme phase icons corresponding to the various phases making up the programme are shown in the bottom of the display.
After the machine has started, only the running icon stays on. When the programme has finished, a flashing
0.00) is displayed.
zero (
8 starts blinking.
0.00 are displayed,
Page 10
10 electrolux control panel
7.3
Heating phase
During the washing cycle the display shows a temperature icon to indicate that the appliance has started the heating phase of the water in the tub.
7.4
Soil level icons
When selecting a programme on the display appears an icon indicating the degree of soilness automatically proposed by the machine.
7.5
Child lock
This device permits you to leave the appliance unsupervised during it’s functioning.
Door locked light (9)
The pilot light
9 illuminates to indicate
that the appliance starts operating and the door is locked.
This light indicates if the door can be opened:
light on: the door is locked and
cannot be opened.
light blinking: the door is opening.
light off: the door is unlocked and
can be opened.
If your laundry is not removed during 10 minutes after the programme is finished, the backlight of the display switches off and the energy saving system will be enabled.
Only the pilot light of the button 88is blinking to indicate that the appliance has to be switched off.
By pressing any button the appliance will come out from the energy saving status and you could set another washing programme or swich the appliance off.
Page 11
use electrolux 11
Use
First Use
Ensure that the electrical and water
connections comply with the installation instructions.
Remove the polystryrene block and
any material from the drum.
Pour 2 litres of water into the main
wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 90°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
Acoustic signals
The machine is provided with an acoustic device, which sounds in the following cases:
at the end of the cycle
in the event of operating problems
By pressing buttons simultaneously for about 6 seconds, the acoustic signal is deactivated (except for the events of operating problems).
By pressing these 2 buttons again, the the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unsupervised and not to worry that children might be injured by or cause damage to the appliance.
4 and 5
This function remains able also when the washing machine is not working. There are two different ways to set this option:
1
before pressing button 8: it will be impossible to start the machine.
2
after pressing button
8: it will be
impossible to change any other programme or option.
To enable or disable this option press simultaneously for about 6 seconds buttons
5 and 6 until on the display,
the icon appears or disappears.
Daily Use
Load the laundry
Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P0004
Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment and, if you wish to carry out the prewash, pour it into the compartment marked
.
Page 12
12 electrolux use
C0070
If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently.
C0071
Select the required programme by turning the programme selector dial (1)
Turn the programme selector dial to the required programme. The light of button
8 starts to flash and
the display shows the duration of the selected programme.
The selector dial can be turned either clockwise or anticlockwise. Position O corresponds to Reset programme/ Switching OFF the machine.
At the end of the programme the selector dial must be turned to position O, to switch the machine off.
Attention!
If you turn the programme selector dial to another programme when the machine is working, the red of button
8 will flash 3 times and the message
Err will apperar on the display to
indicate a wrong selection. The machine will not perform the new selected programme.
Programme Option buttons
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing the button When these buttons are pressed, the corresponding pilot lights illuminates. When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the integrated red pilot light of the button flashes for 3 times and the Err message appears on the display for some seconds.
For the compatibility among the washing programmes and the options see chapter «Washing Porgrammes».
8.
8
For the description of each washing programmes of the selector dial, consult the chapter «Washing programmes».
Select the temperature by pressing button
2
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine.
Page 13
use electrolux 13
When selecting a programme, the appliance automatically proposes a temperature. For the maximum temperature of each programme consult the chapter “Washing programmes”.
Select the spin speed or Rinse Hold option
Press button 3 repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up.
The maximum spin speed for cotton programmes is 1100 rpm.
Rinse Hold: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows flashing, the pilot light 9 is on, the light of button 8 is off and the door is locked to indicate that the water must be emptied out.
To empty the water out please reed the chapter «At the end of the programme».
Select the Easy iron option by pressing button
Selecting this button the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform some additional rinses for some programmes. This function can be used for cotton and synthetic fabrics. On cotton programmes the maximum spin speed is reduced.
by pressing button 3
0.00
4
Select the Extra Rinse option by pressing button 5
The machine performs some additional rinses. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
Select the Delay Start by pressing button
Before you start the programme, if you wish to delay the start, press button 6 repeatedly, to select the desired delay. The relevant light will illuminate.
The selected delay time value (up to 20 hours) will appear on the display for a few seconds, then the duration of the programme will appear again.
You must select this option after you have set the programme and before you press button
If you wish to add laundry in the machine during the delay time you will press button pause. Add the laundry, close the door and press button 8 again.
You can cancel or modify the delay time at any moment, before you press button
The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.
Selecting the delayed start.
• Select the programme and the
• Select the delay start.
• Press button
The programme will start after the selected delay has expired.
6
8.
8 to put the machine in
8.
required options.
8: the machine starts its
hourly countdown.
Page 14
14 electrolux use
Cancelling the delayed start after having started the machine
• Press button
• Press button
8. 6 button once until the
symbol 0’ is displayed.
• Press button
8 again.
The Delay Start can not be selected with Drain programme.
Select the Start/Pause by pressing button
8
To start the selected programme, press button 8; the green pilot light stops flashing.
To interrupt a programme which is running, press button
8: the green pilot
light starts to flash. To restart the programme from the point at which it was interrupted, press button 8 again.
If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, an integrated red pilot light of button
8
flashes for 3 times the message Err is displayed for a few seconds.
Select the Time Manager option by pressing buttons 10
This function allows you to modify the washing time, automatically proposed by the washing machine.
By pressing this buttons repeatedly, the duration of the washing cycle can be increased or decreased. A soil level icon will appear on the display to indicate the choosen degree of soil.
(*) We recommend you to reduce the load
sizes (see Washing programmes table).
Soil
Level
Intensive For heavy soiled items
Normal For normal soiled items
Daily For daily soiled items
Light For slightly soiled items
Quick For very slightly soiled items
Super Quick (*)
Icon Type of fabric
For items used or worn for a short time
Attention!
This option cannot be selected with the Economy cottons programmes.
The availability of these soil level icons change according to the type of fabric as shown in the following chart.
Fabric Soil Level
Intensive Normal Daily Light Quick S. Quick
Cottons
95°-90°C
60°C 40°C 30°C
Synthetics
60°C 40°C 30°C
Delicates
40°C 30°C
X X X X X X X X X X X X X X X X X X X X X X X X
(cold)
X X X X X X
X X X X X X X X X X X X
(cold)
(cold)
X X X X
X X X X X X X X X X X X
Page 15
use electrolux 15
Altering an option or a running programme
It is possible to change some option before the programme carries it out. Before you make any change, you must pause the washing machine by pressing
8.
button (Only the Time Manager option cannot be modified after the programme has started. )
Changing a running programme is possible only by resetting it. Turn the programme selector dial to O and then to the new programme position. Start the new programme by pressing button
8 again. The washing water in the tub
will not emptied out.
Interrupting a programme
Press button programme which is running, the corresponding light starts to flash. Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to O to cancel a programme which is running. You can now select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing button
If the pilot light 9 blinks and in a few minutes goes off, the door can be opened.
If the pilot light few minutes doesn’t go off, this means that the machine is already heating, that the water level is above the bottom edge of the door.
In this case the door can not be opened.
8 to interrupt a
8.
9 doesn’t blink and in a
If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial to O. After a few minutes the door can be opened (pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme and options again and press button
At the end of the programme
The machine stops automatically, the pilot light of button three blinking «0.00» will appear on the display. The buzzer sounds.
If a programme with option that ends with water in the tub has been selected, the pilot light and the door locked to indicate that the water must be emptied out before opening the door.
To empty out the water:
turn the programme selector dial to
O
select the Drain or the Spin
programme
reduce the spin speed if needed, by
pressing the relevant button
press button 8
At the end of programme, the pilot
9 goes off an the door can be
lights opened.
Turn the programme selector dial to «O» to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
8.
8 goes off and
9 remains lit
Page 16
16 electrolux washing hints
Washing hints
Sorting the laundry
Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.
Temperatures
for normally soiled white
90°or
95°
60°
30°-40°-
(cold)
Before loading the laundry
Never wash whites and coloureds together. Whites may lose their “whiteness” in the wash.
New coloured items may run in the first wash; they should therefore be washed separately the first time.
Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes.
cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...)
for normally soiled, colour fast garments (e.g. shirts,
night dresses, pyjamas....) in
linen, cotton or synthetic fibres and for lightly soiled white cotton (e.g. underwear).
for delicate items (e.g. net curtains), mixed laundry including synthetic fibres and woollens bearing the label «pure new wool, machine washable, non-shrink».
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks or tie them up in a bag or net.
Maximum loads
Recommended loads are indicated in the programme charts.
General rules: Cotton, linen: drum full but not too
tightly packed;
Synthetics: drum no more than half full; Delicate fabrics and woollens: drum
no more than one third full. Washing a maximum load makes the
most efficient use of water and energy. For heavily soiled laundry, reduce the
load size.
Laundry weights
The following weights are indicative:
1200 gbathrobe
100 gnapkin 700 gquilt cover 500 gsheet 200 gpillow case 250 gtablecloth 200 gtowelling towel 100 gtea cloth 200 gnight dress 100 gladies’ briefs 600 gman’s work shirt 200 gman’s shirt 500 gman’s pyjamas 100 gblouse 100 gmen’s underpants
Removing stains
Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing.
Page 17
washing hints electrolux 17
Blood: treat fresh stains with cold water.
For dried stains, soak overnight in water with a special detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with acetone (*), lay the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Remove any residual marks from white fabrics with bleach.
Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment. Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature.
The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling.
All commonly available washing machine detergents may be used in this appliance:
• powder detergents for all types of fabric,
• powder detergents for delicate fabrics (60°C max) and woollens,
• liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only.
The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme.
If using concentrated powder or liquid detergents, a programme without prewash must be selected.
The washing machine incorporates a recirculation system which allows an optimal use of the concentrated detergent.
Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme.
Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme.
Page 18
18 electrolux washing hints
Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark
in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used.
Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority.
Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:
• you are washing a small load,
• the laundry is lightly soiled,
• large amounts of foam form during washing.
Degrees of water hardness
Level
Characteristic
German
1 0-7 0-15soft 2 8-14 16-25medium 3 15-21 26-37hard 4 > 21 > 37very hard
Degrees
°dH
French
°T.H.
Page 19
Washing programmes
washing programmes electrolux 19
Programme/
Temperature
Cottons 90°- Cold
Cottons + Prewash
90°- Cold
Synthetics 60° - Cold
Synthetics + Prewash
60° - Cold
Delicates 40° - Cold
Type of laundry Options
SPIN REDUCTION/
White
and coloured
cotton (normally
soiled items)
White
and coloured
cotton (heavy soiled
items)
Synthetic or mixed fabrics
(normally
soiled items)
Synthetic or mixed fabrics
(heavy soiled
items)
Delicate fabrics
RINSE HOLD
EASY IRON
EXTRA RINSE
TIME MANAGER
SPIN REDUCTION/
RINSE HOLD
EASY IRON
EXTRA RINSE
TIME MANAGER
SPIN REDUCTION/
RINSE HOLD
EASY IRON
EXTRA RINSE
TIME MANAGER
SPIN REDUCTION/
RINSE HOLD
EASY IRON
EXTRA RINSE
TIME MANAGER
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
TIME MANAGER
Description of
programme
Main wash Rinses Long spin at maximum speed. Max. load kg 3,5 ** Red. load kg 2
Prewash, Main wash Rinses Long spin at maximum speed. Max. load kg 3,5 ** Red. load kg 2
Main wash Rinses Short spin Max. load kg 1,5 ** Red. load kg 1
Prewash, Main wash Rinses Short spin Max. load kg 1,5 ** Red. load kg 1
Main wash,Rinses
/
Short spin Max. load kg 1,5 ** Red. load kg 1
Drain and long spin
Spin
Separate spin for
cottons
SPIN REDUCTION
at the maximum speed Max. load kg 3,5
For emptying out the
Drain
last rinse water in programmes with the
Draining of water
Rinse Hold option
Separate rinse
Rinses
cycle for cotton
hand washed items
** If you select the Super Quick option by pressing Time Manager buttons (10), we recom-
mend you, to reduce the maximum load as indicated. (Red. load = reduced load). Full loading is possible however with somewhat reduced cleaning results.
SPIN REDUCTION/
RINSE HOLD
EASY IRON
EXTRA RINSE
3 rinses Long spin at maximum speed. Max. load kg 3,5
Page 20
20 electrolux washing programmes
Washing programmes
Programme/ Temperature
Lingerie 40° - Cold
Silk 30° - Cold
Handwash 40° - Cold
Wool 40° - Cold
Cottons Economy + Prewash 90° - 40°
Cottons Economy 90° - 40°
O
Type of laundry Options
Special programme for extremely
delicate hand
SPIN REDUCTION/
RINSE HOLD
washable items
Silk items to be
gentle washed and spun
Special programme for hand washing fabrics
Specially tested programme for wool garments bearing the “Pure new wool, non­shrink, machine washable” label
White and coloured cotton economy, normally
soiled
White and coloured cotton economy, lightly-
normally soiled
SPIN REDUCTION/
RINSE HOLD
SPIN REDUCTION/
RINSE HOLD
SPIN REDUCTION/
RINSE HOLD
SPIN REDUCTION
RINSE HOLD
EASY IRON
EXTRA RINSE
SPIN REDUCTION/
RINSE HOLD
EASY IRON
EXTRA RINSE
For cancelling the wash programme which is running and to switch the machine off
Description of
programme
Main wash Rinses Short spin
Max. load kg 0,5
Main wash Rinses Short spin
Max. load kg 0,5
Main wash Rinses Short spin
Max. load kg 0,8
Main wash Rinses Short spin
Max. load kg 0,8
Main wash
/
Rinses Long spin at maximum speed.
Max. load kg 3,5
Main wash Rinses Long spin at maximum speed.
Max. load kg 3,5
Page 21
Programme information
programme information electrolux 21
Wool and
Handwash
Silk
Lingerie
Economy
Rinses
Drain
Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with the “hand washing” care symbol .
Delicate washing programme suitable for silk and mixed synthetics items. Washing temperature is maximum 30°C. The maximum spin speed is automatically reduced.
This programme is suitable for very delicate items, aslingerie, bras and underwear etc.
This programme can be selected for slightly or normally soiled cotton items. The temperature will decrease and the washing time will be extended. This allows to obtain a good washing efficiency by saving energy.
With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine performs 3 rinses, followed by a final long spin at maximum speed. The spin speed can be reduced by pressing button 3.
For emptying out the water of the last rinse in programmes with the Rinse Hold option. Turn first the programme selector dial to O, then select programme Drain and press button 8.
Spin
O = Cancelling/OFF
Separate spin for hand washed garments and after programmes with Rinse Hold option. Before selecting this programme the selector dial must be turned to O. You can choose the speed by pressing the relevant button to adapt it to the fabrics to be spun.
To reset a programme and to switch off the machine turn the selector dial to O. Can now a new programme be selected.
Page 22
22 electrolux care and cleaning
P0038
C0073
C0072
Care and cleaning
You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
After each wash
Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance. Keeping the door open after a wash will also help to preserve the door seal.
Maintenance Wash
With the use of low temperature washes it is possible to get a build up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash programme.
• Use a normal measure of detergent, must be a powder with biological properties.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer should be cleaned regularly. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder.
To aid cleaning, the top part of the additive compartment should be removed. Clean all parts with water.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess.
External cleaning
Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly.
Insert the detergent dispenser drawer in the guide rails and push it in.
Page 23
Washing drum
P1050
Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.
Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.
1. Remove any rust deposits on the
drum with a cleaning agent for stainless steel.
2. Run a washing cycle without any
washing to clean off any cleaning agent residues. Programme: COTTONS/LINEN 90°C, press button 6, add approx. 1/4 measuring cup of detergent.
Door seal
Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.
care and cleaning electrolux 23
P1114
• Place a containfer close to the pump to collect any spillage.
• Pull out the emergency emptying hose, place it in the container and remove its cap.
• When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover.
Cleaning the pump
The pump should be inspected if
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump.
Proceed as follows:
• Disconnect the appliance.
• If necessary wait until the water has cooled down.
• Open the pump door.
P1115
• Remove any objects from the pump impeller by rotating it.
• Put the cap back on the emergency emptying hose and place the latter back in its seat.
Page 24
P1090
24 electrolux care and cleaning
P1117
• Screw the pump cover fully in.
• Close the pump door.
Warning!
The dangers of freezing
If the machine is exposed to temperatures below 0°C, certain precautions should be taken.
• Turn off the water tap.
• Unscrew the inlet hose.
• Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.
• Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again.
• When you intend to start the machine up again, make sure that the room temperature is above 0°C.
When the appliance is in use and depending on the programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose. Clean the filter using a hard bristle brush. Tighten up the inlet hose.
Emergency emptying out
If the water is not discharged, proceed as follows to empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the pump door;
• place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bowl. When the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out;
• clean the pump if necessary as previously described;
• replace the emergency emptying hose in its seat after having plugged it;
• screw the pump cover again and close the door.
Important!
Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO VALVE device avoiding that part of the detergent remains unused at next washing.
Page 25
what to do if... electrolux 25
What to do if...
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
During machine operation it is possible that the red light of button 8 blinks, at the same some acoustic signals sound and one of the following alarm codes appears on the display to indicate that the machine is not working:
E10: problem with the water supply
E20: problem with water draining
E40: door open.
Once the problem has been eliminated, press button 8 to restart the programme. If after all checks, the problem persists, contact your local Service Centre.
Malfunction Possible cause Solution
The washing machine does not start:
The machine does not fill:
The door has not been
closed. E40.
The plug is not properly
inserted in the power socket.
There is no power at the
socket.
The main fuse has
blown.
The selector dial is not
correctly positioned and button 8 has not been pressed.
The delay start has been
selected.
The Child Safety Lock
has been activated.
The water tap is closed.
E10
The inlet hose is
squashed or kinked. E10
The filter in the inlet hose
is blocked. E10
Close firmly the door.
Insert the plug into the
power socket.
Please check your
domestic electrical installation.
Replace the fuse.
Please turn the selector
dial and press button 8 again.
If the laundry are to be
washed immediately, cancel the delay start.
Deactivate the Child
Safety Lock.
Open the water tap.
Check the inlet hose
connection.
Clean the water inlet
hose filter.
The door is not properly
closed. E40
Close firmly the door.
Page 26
26 electrolux what to do if...
Malfunction Possible cause Solution
The machine fills then empties immediately:
The machine does not empty and/or does not spin:
There is water on the floor:
Unsatisfactory washing results:
The end of the drain
hose is too low.
The drain hose is
squashed or kinked. E20
The drain pump is
clogged. E20 The Rinse Hold option
has been selected.
The laundry is not evenly
distributed in the drum.
Too much detergent or
unsuitable detergent (creates too much foam) has been used.
Check whether there are
any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp.
The drain hose is
damaged.
The cap on the
emergency emptying hose has not been replaced after cleaning the pump.
Too little detergent or
unsuitable detergent has been used.
Stubborn stains have not
been treated prior to washing.
Refer to relevant
paragraph in “water drainage” section.
Check the drain hose
connection.
Clean the drain pump.
Select the Drain or Spin
programme.
Redistribute the laundry.
Reduce the detergent
quantity or use another one.
Check the water inlet
hose connection.
Change it with a new
one.
Put the cap back on the
emergency emptying and place the latter back in its seat.
Increase the detergent
quantity or use another one.
Use commercial products
to treat the stubborn stains.
The correct temperature
was not selected.
Excessive laundry load.
Check if you have
selected the correct temperature.
Introduce into the drum
less laundry.
Page 27
what to do if... electrolux 27
Malfunction Possible cause Solution
The door will not open: The programme is still
running.
The door lock has not
been released.
There is water in the
drum.
The machine vibrates or is noisy:
The transit bolts and
packing have not been removed.
The support feet have
not been adjusted.
The laundry is not evenly
distributed in the drum.
Maybe there is very little
laundry in the drum.
Spinning starts late or the machine does not spin:
The electronic unbalance
detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and select the spin programme.
Wait the end of washing
cycle.
Wait until the pilot light 9
goes off.
Select drain or spin
programme to empty out the water.
Check the correct
installation of the appliance.
Check the correct
levelling of the appliance.
Redistribute the laundry.
Load more laundry.
Redistribute the laundry.
Page 28
28 electrolux what to do if...
Mod. ..........
Prod. No. ...........
Ser. No. .........
M
o d . . . .
. .
. . . . .
P
r
o
d
. N o . . . . . .
. . . . . .
S e r
. N o .
. . . .
. . . . .
P0042 BD
Malfunction Possible cause Solution
The machine makes an unusual noise
The machine is fitted
with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and more even distribution of the laundry in the drum when spinning, as well as increased stability of the machine.
No water is visible in the drum
Machines based on
modern technology operate very economically using very little water without affecting performance.
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
Page 29
technical data electrolux 29
Technical data
Dimensions Width 60 cm
Height
Depth
85 cm
35 cm
Electrical connection Voltage - Overall power ­Fuse
Water supply pressure Minimum 0,05 MPa
Maximum Load
Spin Speed
Information on the electrical connection is given on the rating plate on the inner edge of the appliance door
Maximum
Cotton
Maximum
0,8 MPa
3,5 kg
1100 rpm
Page 30
30 electrolux consumption values
Consumption values
Programme Energy
Water
consumption
(in litres)
Cottons 90° 1,544
Cottons 60° 0,8539
Cottons Economy 60° (*) 0,6639
Synthetics 60°
Delicates 40° 0,548
Wool 40° 0,453
Handwash 40° 0,453
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme.
Programme
consumption
(in kWh)
0,845
duration
(in minutes)
the control panel.
programmes, please
refer to the display on
For the duration of the
(*) The programme «Cottons Economy»
at 60°C is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards.
Page 31
Installation
P0001
P1129
P1051
P0002
Unpacking
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
Using a spanner unscrew and remove
1. the 3 rear bottom screws.
installation electrolux 31
Positioning
Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by car­pets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
2. Slide out the three plastic pins.
3. Stop all the holes with the plastic plugs supplied with the instruction booklet.
Water inlet
Connect the water inlet hose to a tap with a 3/4" thread.
Do not use already employed hoses for water connection.
Page 32
32 electrolux installation
A
P0352
P0351
P0022
P0021
Water-stop device
The inlet hose is provided with a water stop device, which protects against damage caused by water leaks in the hose which could develop due to natural ageing of the hose. This fault is shown by a red sector in the window «A». Should this occur, turn the water tap off and refer to your Service Centre to replace the hose.
The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.
Water drainage
The end of the drain hose can be positioned in three ways:
Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this
case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall.
Important!
The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks.
In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground.
Page 33
Directly into a drain pipe at a
P1118
height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose. The drain hose must not be kinked.
For a correct functioning of the machine the drain hose must remain hooked on the proper support piece situated on the top part of the back side of the appliance.
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre.
installation electrolux 33
The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.
The power supply cable must be easily accessible after installing the machine.
Should the appliance power supply cable need to be replaced, this must be carried out by a Service Centre.
Electrical connection
Information on the electrical connection is given on the rating plate on the inner edge of the appliance door.
Check that your domestic electrical installation can take the maximum load required, also taking into account any other appliances in use.
Connect the machine to an earthed socket.
Page 34
34 electrolux environment concerns
Environment concerns
Packaging materials
The materials marked with the symbol
are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled
by disposing of them properly in appropriate collection containers.
Old machine
Use authorised disposal sites for your old appliance. Help to keep your country tidy!
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Ecological hints
To save water, energy and to help protect the environment, we recommend that you follow these tips:
• Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).
• The machine works more economically if it is fully loaded.
• With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.
• Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.
Page 35
Page 36
ANC number: 135499430 - 00 - 122008
Loading...