AEG-Electrolux FM7530K-AN User Manual

FM 7530 K-AN
Ceramic hob
Installation and Operating Instructions
Dear Customer,
Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appli­ance.
The following symbols are used in the text:
1 Safety instructions
Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance.
3 Useful tips and hints
2 Environmental information
2
Contents
Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Description of the Appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Selecting the heat setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
To switch the outside ring on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Switching the STOP+GO function on and off. . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Tips on cooking and frying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Installing more than one Frontline hob . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Rating Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do not, any damage re-
3
sulting is not covered by the warranty.
5 This appliance conforms with the following EU Directives:
73/23/EEC dated 19.02.1973 Low Voltage Directive89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
This appliance should be used only for normal domestic cooking and frying of food.
The appliance must not be used as a work surface or as a storage sur­face.
Additions or modifications to the appliance are not permitted.
Do not place or store flammable liquids, highly inflammable materials
or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Child safety
Small children must be kept away from the appliance.
Only let older children work on the appliance under supervision.
General safety
The appliance may only be installed and connected by trained, regis­tered service engineers, or competent persons.
Built-in appliances may only be used after they have been built in to suitable built-in units and work surfaces that meet standards.
In the event of faults with the appliance or damage to the glass ce­ramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply to prevent the possibility of an electric shock..
Repairs to the appliance must only be carried out by trained regis­tered service engineers.
4
Safety during use
Remove stickers and film from the glass ceramic.
There is the risk of burns from the appliance if used carelessly.
Cables from electrical appliances must not touch the hot surface of
the appliance or hot cookware.
Overheated fat and oil can ignite quickly. When cooking with fat or oil (e.g. frying chips) do not leave the appliance unattended.
Switch the cooking zones off after each use.
Safety when cleaning
For cleaning, the appliance must be switched off and cooled down.
For safety reasons, the cleaning of the appliance with steam jet or
high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
The ceramic glass can be damaged by objects falling onto it.
The edge of the ceramic glass can be damaged by being knocked by
the cookware.
Cookware made of cast iron, cast aluminium or with damaged bot­toms can scratch the ceramic glass if pushed across the surface.
Objects that melt and things that boil over can burn onto the ceramic glass and should be removed straightaway.
Do not use the cooking zones with empty cookware or without cook­ware.
5
Description of the Appliance
Cooking surface layout
Double ring cooking zone
700/1700W
Frontline strip
Single cooking zone
1200W
Control panel
Double ring cooking zone
700/1700W
Triple ring cooking zone
800/1600/2300W
6
Control panel layout
Left-hand side
Child lock pilot
light
Heat setting
indicator
Heat setting
selection
Child lock
Right-hand side
Heat setting
indicator
Warm up pilot
light
Double ring
pilot light
Outer ring
On/Off
Automatic
warm-up
Warm up pilot
light
Timer indicator Double ring pilot
light
Warm up
pilot light
Timer selection Automatic
warm-up
function
Timer Outer ring
On/Off
Triple ring pilot
light
Timer indicator
Warm up
pilot light
Heat setting
indicator
Heat setting
selection
Heat setting
indicator
On/Off pilot
light
Heat setting
selection
Automatic warm-
up function
Timer selection Automatic
Timer
Middle/outer ring
On/Off
On/Off
warm-up
Heat setting
selection
7
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
Sensor field Function
On / Off Switches appliance on and off
Increase settings To increase heat settings
Reduce settings To reduce heat settings
Automatic warm-up
function
Dual zone touch control Switches outside zone
Triple zone touch con-
trol
Timer Timer selection
Increase settings To increase Timer time
Reduce settings To reduce Timer time
Stop+Go To switch the Keep Warm setting
To switch automatic warm-up function on/off
on and off
Switches outside zones on and off
on/off
8
Displays
Display Description
¾ Cooking zone is switched off u Keep warm setting Keep warm setting/STOP+GO
function is set
¿ - Ç Heat settings Heat setting is set 2 - 6 Heating setting plus
decimal point
e Fault Malfunction has occurred h Residual heat Cooking zone is still hot l Child safety device Child safety device is engaged _ Safety cut-out Safety cut-out has been activated
Intermediate heat setting is set
Residual heat indicator
1 Warning! Risk of burns from residual heat. After being switched off,
the cooking zones need some time to cool down. Look at the residual heat indicator
h .
3 Residual heat can be used for melting and keeping food warm.
9
Operating the appliance
Switching the appliance on and off
Control panel Display Pilot light
Switch on Touch for 2 seconds ¾ / h lights up Switch off Touch for 1 second h / none goes out
3 After switching on, within approx. 10 seconds a heat setting or a func-
tion must be set, otherwise the appliance automatically switches itself off.
3 Switching off also works by touching and at the same time. This
applies for all individual functions, for example, ”Switching off the Timer”.
Selecting the heat setting
Control panel Indicator
To increase Touch u to Ç
10
To decrease Touch Ç to ¾ To switch off Touch and at the same time ¾
To switch the outside ring on and off
By switching the outside rings on or off, the effective heating surface can be matched to the size of the cookware.
3 Before an outside ring can be switched on, the inside ring must be
switched on.
Double ring cooking zones
To switch on outside ring
To switch off outside ring
Triple cooking zone Sensor panel Power indicator
To switch on middle ring Touch for 1-2 seconds. One power indicator is lit.
To switch on outside ring Touch for 1-2 seconds.
To switch off outside ring Touch for 1-2 seconds.
To switch off middle ring Touch for 1-2 seconds.
Sensor field Pilot light
Touch for 1-2 seconds is lit
Touch for 1-2 seconds goes out
Two power indicators are
Second power indicator
goes out.
First power indicator goes
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set. This function can be used to briefly in­terrupt and then continue the cooking process e.g. to take a telephone call.
lit.
out.
Control panel Display
To switch on Touch STOP+GO u
To switch off Touch STOP+GO heat setting that was previ-
ously set (not automatic warm up function)
3 Timer functions are not stopped by STOP+GO. 3 STOP+GO locks the whole control panel except the sensor field .
11
Loading...
+ 25 hidden pages