AEG-Electrolux FM4800TYAN 55R User Manual
FM4800TYAN
User manual Induction Teppan Yaki
2
The followi
1
Dear Customer
Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional
design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
In addition to this you find environmental and energy saving aspects as an integral part of our products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently.
To refer to this manual any time you need to, we recommend you to keep it in a
safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
ng symbols are used in this user information:
Warning! This must be read! Important advice for the safety of persons and
3 General information and advice
information on avoiding damage to the appliance
2 Information on environmental protection
z Dangerous voltage
Contents
Operating Instructions 4
Safety instructions 4
Description of the Appliance 6
The most important features of your appliance 6
Teppan Yaki layout 7
Control panel layout 7
Touch Control sensor fields 8
Displays 8
Residual heat indicator 8
Operating the appliance 9
Preparing food with the Teppan Yaki 9
Temperature range 9
Switching the appliance on and off 9
Setting the temperature 10
Using the child safety device 11
Using the timer 12
Automatic switch off 13
Tips for cooking with the Teppan Yaki 14
Using fats and oils 14
Tables 15
Cleaning and care 18
3Contents
What to do if … 19
Disposal 20
Installation Instructions 21
Safety instructions 21
Assembly 22
Installing more than one Frontline hob 26
Rating Plate 30
Guarantee/Customer Service 31
Service and Spare Parts 35
Operating Instructions4
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do not, any damage resulting is not
covered by the warranty.
Correct use
• Persons (including children) who, due to their physical, sensory or mental capacity or their inexperience or lack of knowledge are unable to use the appliance safely should not operate this appliance without the supervision or
instruction of a responsible person.
• Do not leave the appliance unattended during operation.
• This appliance should be used only for normal domestic cooking and frying of
food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusi-
ble objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Child safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appliance on,
we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered service engineers, or competent persons.
• Built-in appliances may only be used after they have been built in to suitable
built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply to prevent the possibility of an electric
shock.
• Repairs to the appliance must only be carried out by trained registered service
engineers.
5Safety instructions
Safety during use
• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
• IMPORTANT Risk of burns! Fat or oil added to the cooking surface which has
already been heated ignites quickly and can spit.
• There is the risk of burns from the appliance if used carelessly.
• Remove stickers and film from the glass ceramic and the cooking surface.
• Cables from electrical appliances must not touch the hot surface of the appli-
ance or hot cookware.
• Switch cooking zone off after every use.
• Users with implanted pacemakers should keep their upper body at least 30 cm
from the cooking zones that are switched on.
• The ventilation gap of 5mm between the worktop and front of the unit underneath it must not be covered.
• Do not use pots and pans made of cast iron or those with damaged bases that
are rough and have burrs. Pushing these about can cause scratches.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or high-pres-
sure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The ceramic glass can be damaged by objects falling onto it.
• The edge of the ceramic glass can be damaged by being knocked by the cook-
ware.
• Objects that melt and things that boil over can burn on and should be removed straightaway.
Special notes for the Teppan Yaki
• During operation, noises can be caused by the grill expanding. This is not a defect in the cooking surface and its way of operating is not affected in any way
by this.
• While using the Teppan Yaki, do not place any magnetically chargeable objects
on the cooking surface.
• If the grill is used frequently, a slight depression may form in the middle of the
cooking surface where the two zones meet. This is not a defect in the cooking
surface and its way of operating is not affected in any way by this. Therefore:
– Do not place pots and pans over the transition between the two zones, as
the depression can cause them to wobble.
– Frying on the transition between the zones can result in uneven browning
(e. g. with pancakes).
Description of the Appliance6
Description of the Appliance
The most important features of your appliance
• The cooking surface is 11 mm thick. It is made of two layers of stainless steel
with a layer of aluminium between them. The cooking surface stores thermal
energy well. This storing of thermal energy prevents the temperature of the
cooking surface sinking rapidly, for example, when preparing meat taken from
the fridge.
• The cooking surface is divided into two separately controlled grilling zones of
the same size (see “Teppan Yaki layout”).
• The groove around the edge fulfils three important functions:
– It reduces the temperature on the mounting surface to such a degree that
the cooking surface can be installed into different types of kitchen worktops.
– The indentation of the groove takes up some of the expansion of the heated
cooking surface.
– Smaller food residues and liquids can simply be pushed into the groove and
effortlessly removed.
• The desired temperature can be kept constant by the thermostat with a readable temperature setting. This prevents the food being overheated and makes
possible low-fat methods of cooking that retain nutrients.
• The foods are prepared (heated) directly on the cooking surface, with or without fat. There is also the option of cooking with pots or pans.
• The heating up time, e.g. to 180 °C, is approx. 4 minutes. The cooling down
time, e.g. from 180 °C to 100 °C, is approx. 25 minutes, or to 60 °C approx.
60 minutes.
• The cooking surface must always be preheated.
Teppan Yaki layout
front grilling zone 1400 W
Control panel
Control panel layout
7Description of the Appliance
rear grilling zone 1400 W
Frontline strip
Temperature display for
rear grilling zone
Child lock pilot
light
Temperature selection
for rear grilling zone
Child lock
Pilot light for tem-
parature preset
160 °C / 180 °C tem-
perature preset
Timer indicator
Timer
Timer selection
Temperature display for
Pilot light for tem-
parature preset
Temperature selection
for front grilling zone
160 °C / 180 °C tem-
perature preset
front grilling zone
On/Off pilot light
On/Off
Description of the Appliance8
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. You control the
functions by touching the sensor fields.
Touch the sensor fields from above, without covering other sensor fields.
Sensor field Function
On / Off Switches appliance on and off
Increase settings To increase the temperature
Reduce settings To reduce temperature
Timer Timer selection
Increase settings To increase Timer time
Reduce settings To reduce Timer time
Child lock Locking control panel for children
160 °C temperature preset To switch on 160 °C temperature pre-
set
180 - 230 °C temperature
preset
To switch on 180 °C temperature preset
Displays
Display Description
Appliance is switched on
50 220
Fault Malfunction has occurred
Residual heat Cooking zone is still hot
Child safety device Child safety device is engaged
Automatic switch off Switch off is active.
Temperature display in degrees Celsius
Temperature is set
Residual heat indicator
1 Warning! Risk of burns from residual heat. After being switched off, the cook-
ing zones need some time to cool down. Look at the residual heat indicator
3 Residual heat can be used for melting and keeping food warm.
.
9Operating the appliance
Operating the appliance
Preparing food with the Teppan Yaki
The foods are prepared (heated) directly on the cooking surface, with or without
fat. There is also the option of cooking with pots or pans.
However, if pots and pans are used on the cooking surface, the warm up time is
markedly longer than on glass ceramic, gas or cast-iron plates.
Accompaniments, e.g. sauces, rice, etc., can be cooked or kept warm in pots or
pans placed directly on the cooking surface.
We do not recommend boiling large quantities on the cooking surface, such as,
e.g. for spaghetti.
3 When food is cooking on the cooking surface, don’t be frightened to turn it or
remove it from the grill surface using a flipper. Wear marks in the cooking surface are normal and do not limit the operation in any way.
3 The induction Teppan Yaki may make noises during operation. These noises are
not a fault in the appliance and do not affect how it works in any way.
Temperature range
You can set the cooking surface to the temperature you want in 10° steps in the
range 50 °C to 220 °C.
3 The heating up time, e.g. to 180 °C, is approx. 4 minutes.
Switching the appliance on and off
Control panel Display Pilot light
To switch on Touch for 2 seconds / lights up
To switch off Touch for 2 seconds / none goes out
3 After switching on, within approx. 10 seconds a heat setting or a function must
be set, otherwise the appliance automatically switches itself off.
Operating the appliance10
Setting the temperature
Control panel Display
To increase Touch 50 to 220
To decrease Touch 220 to 50
To switch off Touch and the same time 0
3 If a temperature is selected, the indicator flashes until the desired temperature is
reached. When the selected temperature is reached, a signal sounds. The indicator stops flashing and displays the selected temperature
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Switching on the child safety device
Step Control panel Display/Signal
1. Switch on appliance. (Do not set a
heat setting.)
2. Touch for 4 seconds
Appliance switches off. Child safety device is switched on after 4 seconds.
Switching off the child safety device
Step Control panel Display/Signal
1. Switch appliance on
2. Touch for 4 seconds 0 lights up
Appliance switches off. Child safety device is switched off after 4 seconds.
Overriding the child safety device
11Operating the appliance
The child safety device can be released in this way for a single cooking session; it
remains activated afterwards.
Step Control panel Display/Signal
1. Switch on the appliance
2. Touch and at the same time / acoustic signal
Until the appliance is next switched off, it can used as normal.
Loading...