AEG-Electrolux FM4513K-AN User Manual
FM 4513 K-AN
User manual Ceramic glass hob
2
The followi
1
Dear Customer
Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional
design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
In addition to this you find environmental and energy saving aspects as an integral part of our products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently.
To refer to this manual any time you need to, we recommend you to keep it in a
safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
ng symbols are used in this user information:
Warning! This must be read! Important advice for the safety of persons and
information on avoiding damage to the appliance
3 General information and advice
2 Information on environmental protection
z Dangerous voltage
Contents
Operating Instructions 4
Safety instructions 4
Description of the Appliance 6
Cooking surface layout 6
Control panel layout 6
Touch Control sensor fields 7
Displays 7
Residual heat indicator 7
Operating the appliance 8
Switching the appliance on and off 8
Setting the heat setting 8
To switch the outside ring on and off 8
Switching the STOP+GO function on and off 9
Using the automatic warm-up function 10
Using the child safety device 11
Using the timer 12
Automatic switch off 14
Tips on Cooking and Frying 15
Cookware 15
Energy saving 15
Examples of cooking applications 16
Cleaning and Care 17
3Contents
What to do if … 18
Disposal 19
Installation Instructions 20
Safety instructions 20
Assembly 21
Installing more than one Frontline hob 24
Rating Plate 28
Guarantee/Customer Service 29
Service 31
Operating Instructions4
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do not, any damage resulting is not
covered by the warranty.
Correct use
• This appliance is not intended for use by children or other persons whose
physical, sensory or mental capabilities or lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
• Do not leave the appliance unattended during operation.
• This appliance should be used only for normal domestic cooking and frying of
food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusi-
ble objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appliance on,
we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered
service engineers.
• Built-in appliances may only be used after they have built in to suitable builtin units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply, to prevent the possibility of an electric
shock.
• Repairs to the appliance must only be carried out by trained registered service
engineers.
5Safety instructions
Safety during use
• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
• There is the risk of burns from the appliance if used carelessly.
• Remove stickers and film from the glass ceramic.
• Cables from electrical appliances must not touch the hot surface of the appli-
ance or hot cookware.
• Switch the cooking zones off after each use.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or high-pres-
sure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by the cook-
ware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
scratch the glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass ceramic
and should be removed straightaway.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or
frying pans to boil dry.
• Do not use the cooking zones with empty cookware or without cookware.
Description of the Appliance6
Description of the Appliance
Cooking surface layout
Single cooking zone
1200W
Frontline strip
Control panel layout
Warm up pilot
STOP+GO pilot light
Heat setting
indicator
light
Timer indicator
Double ring
pilot light
Warm up
pilot light
Double ring cooking zone
700/1700W
Control panel
Heat setting
indicator
On/Off pilot
light
STOP+GO
Heat setting
selection
Automatic warm-up
function
Timer selection Automatic
Timer
warm-up
function
Outside ring
On/Off
On/Off
Heat setting
selection
7Description of the Appliance
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals.
Touch the sensor fields from above, without covering other sensor fields.
Sensor field Function
On / Off To switch the appliance on and off
Increase settings To increase heat settings
Reduce settings To reduce heat settings
Automatic warm-up
function
Double ring switch Switches outside ring
Timer Timer selection
Increase settings To increase Timer time
Reduce settings To reduce Timer time
Stop+Go To switch the Keep Warm setting on/off
To switch automatic warm-up
function on/off
on and off
Displays
Display Description
¾ Cooking zone is switched off
u Keep warm setting Keep warm setting/STOP+GO function is set
¿ - Ç Heat settings Heat setting is set
2 - 6 Heating setting plus
decimal point
Intermediate heat setting is set
e Fault Malfunction has occurred
h Residual heat Cooking zone is still hot
l Child safety device Child safety device is engaged
_ Automatic switch off Switch off is active.
Residual heat indicator
1 Warning! Risk of burns from residual heat. After being switched off, the cook-
ing zones need some time to cool down. Look at the residual heat indicator h .
3 Residual heat can be used for melting and keeping food warm.
Operating the appliance8
Operating the appliance
Switching the appliance on and off
Control panel Display Pilot light
Switch on Touch for 2 seconds ¾ / h lights up
Switch off Touch for 1 second h / none goes out
3 After switching on, within approx. 10 seconds a heat setting or a function must
be set, otherwise the appliance automatically switches itself off.
Setting the heat setting
Control panel Indicator
To increase Touch u to Ç
To decrease Touch Ç to ¾
To switch off Touch and at the same time ¾
To switch the outside ring on and off
By switching the outside ring on or off, the effective heating surface can be
matched to the size of the cookware.
3 Before the outside ring can be switched on, the inside ring must be switched on.
Double ring cooking zone Sensor field Pilot light
To switch on outside ring Touch for 1-2 seconds is lit
To switch off outside ring Touch for 1-2 seconds goes out
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that are
switched on to the keep warm setting and then back to the heat setting that
was previously set.
Control panel Display
To switch on Touch u
To switch off Touch heat setting that was previously
set (not automatic warm up function)
3 Timer functions are not stopped by STOP+GO.
3 STOP+GO locks the whole control panel except the sensor field .
9Operating the appliance
Operating the appliance10
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function. The automatic warm-up function sets the cooking zone to the highest setting for a certain period of time and then automatically switches back to the cooking setting
that was originally set.
Automatic warm-up
Sensor field Power indicator
function
To switch on Touch for 1 second is lit throughout the
automatic warm up period
To switch off Touch for 1 second goes out
3 If during the automatic warm up a higher heat setting is selected, e.g. from Á
to Ã, the automatic warm up is adjusted.
The length of time that the automatic warm up function operates depends on
the heat setting selected.
Heat
setting
v 0:30
1 1:00
2 1:40 2. 2:40
3 4:50 3. 5:30
4 6:30 4. 8:10
5 10:10 5. 12:20
6 2:00 6. 2:30
7 3:30
8 4:30
9 ---
Length of the
automatic warm up
[min:sec]
Intermediate heat
setting
Length of the
automatic warm up
[min: sec]
Loading...