AEG-Electrolux FD26IMDEN User Manual

Grill Assembly Built-In Instructions

5-9

10-12

16-17

Welcome & Congratulations

Please record Grill information for future reference and service work:

Model #:

Serial #:

Date of Purchase:

Gas Type:

Please retain this manual for future reference

Congratulations on your purchase of a new gas grill! At Electrolux Home Products, we are very proud of our product and are completely committed to providing you with the best service possible. Your satisfaction is our number one priority.

We know you’ll enjoy your new gas grill and Thank You for choosing our product. We hope you consider us for future purchases.

PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTIONS

This Use & Care Manual provides specific operating instruction for your model. Use your gas grill only as instructed in this manual. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.

Questions? 1-800-320-0859

General Safety Instructions

IMPORTANT SAFETY INFORMATION

Read this manual carefully before using your grill to reduce the risk of fire, burn hazard or

other injury.

- Extreme care should be used because of the high temperatures produced by this appliance. CHILDREN SHOULD NOT BE LEFT UNATTENDED IN AN AREA WHERE THE GRILL IS BEING OPERATED.

- This appliance must be kept clear from combustible materials, gasoline or other flammable vapors and liquids. Do not allow flammable materials to come in contact with grate, burner or hot surfaces.

- Do not repair or replace any part of this appliance unless it is specifically recommended in this manual. A qualified service technician should conduct all other service.

- Follow the installation and servicing instructions provided with this product. Have your grill installed by a qualified service technician. Locate the main gas supply valve so that you know how to shut the gas off to your grill. If you smell gas, make sure all gas connections are tight before operation. If you continue to smell gas call a qualified technician.

- When lighting a burner, always pay close attention to what you are doing. Be certain you are pushing the ignitor that lights the burner you intend on using.

FOR YOUR SAFETY

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flames.

3. Open lid.

4. If odor continues, immediately call your gas supplier.

TESTED IN ACCORDANCE WITH ANSI Z21.58b-2002/CGA 1.6b-M02 STANDARD FOR OUTDOOR COOKING GAS APPLIANCES. THIS GRILL IS FOR OUTDOOR USE ONLY.

Check your local building codes for the proper method of installation. In the absence of local codes, this unit should be installed in accordance with the National Fuel Gas Code No. Z223.1-2002 and the National Electrical Code ANSI/NFPA No. 70-1990

WARNING

DO NOT try lighting this appliance without reading

the “LIGHTING INSTRUCTIONS” section of this

manual.

FOR YOUR SAFETY

DO NOT store or use gasoline or other flammable vapors and

liquids in the vicinity of this or any other appliance.

An LP cylinder not connected for use shall not be stored

the vicinity of this or any other appliance.

FOR OUTDOOR USE ONLY

This appliance is not intended to be

installed in or on recreational vehicles or boats.

CALIFORNIA PROPOSITION 65 - WARN- ING: The Burning of gas cooking fuels generates some by products which are on the list of substances which are known by the State of California to cause cancer or reproductive harm. California law requires businesses to warn customers of potential exposure to such substances. To minimize exposure to these substances, always operate this unit according to the use and care manual, ensuring you provide good ventila-

tion when cooking with gas.

Grill Features: FD26

1. Roll top grill hood 6. Handle

2. Grilling/Cooking surface 7. Warming shelf

3. Electronic ignitor: main burners 8. Side shelf

4. Control knobs: main burners 9. Pedestal base

5. Convection vents

Grill Components List

Cart Parts

13 sided pedestal base 1 Base 2 Wheel channels

Grill Par

1 Stainless steel grill head 2 Stainless steel side shelves 1 Electronic ignitor 1 Flavor grid 2 Porcelain bar grates 1 Stainless steel warming rack 1 Drip pan 1 Hose and regulator (LP models only) 1 Black plastic plug for right shelf hole

Assembly Par

8 Hex head screws 4 Bolts

Par

t #’s

WIP-192-326071 WIP-191-326070 WIP-192-326365

Grill Par

WIP-122-HDFA26 WIP-192-326393 RMP-122-00648 WIP-192-326313 RMP-122-00688 WIP-192-326009 RMP-122-00005 RMP-122-00820 RMP-122-00491

Assembly Par

RMP-122-00615 RMP-122-00036

Grill Assembly

Car

t Assembly

1. Set 3 sided pedestal upside down. Set the base on the top of the cart assembly aligning the four wheel channel holes and 2 screw holes . Then set the 2 wheel channels on the base and attach them using the (4) bolts provided, from inside the cart upwards through wheel channels. (See Fig. 1 & 2)

Attaching Grill Head to Cart

1. With the grill on its back, (be sure to hold the hood shut when doing this) loosen all 4 bolts on the bottom side of the grill. (See Fig. 3)

2. Have someone help you pick up the grill and set it on the top of the cart, with the rear of the grill above the opening . Make sure the 4 bolt heads fall through the large opening of the key hole slots in the top of the cart. Slide the grill head backward so the bolts are resting in the small opening of the key hole slots. Tighten the bolts securely-be sure not to over tighten and strip the bolts. Next insert 2 hex head screws into grill bottom through cart & 2 hex head screws into the cart base. (See Fig. 4)

Note: This is a very heavy step that requires

two individuals to complete.

Fig. 3

Fig. 4

Note: Prior to assembly remove protective film from stainless steel parts

Fig. 2

Fig. 1

Bolts

Screw holes

Caution: Gas regulator is not flush with bottom. DO NOT let the Grill head sit flat without placing support around regulator to prevent damage to the regulator prior to installing on cart.

Assembly requires: 6 tools and a Friend

Tools required:

Power screwdriver Screwdriver extension 1/4” socket wrench 1/2” socket wrench adjustable wrench scissors

Key hole slots

Wheel Channel holes

Screw Holes

+ 13 hidden pages