AEG-Electrolux FAVORIT 88002 User Manual

FAVORIT 88002

DISHWASHER USER MANUAL

2

CONTENTS

4 SAFETY INFORMATION
6 PRODUCT DESCRIPTION
7 CONTROL PANEL

8PROGRAMMES
10 OPTIONS
11 BEFORE FIRST USE
14 DAILY USE
17 CARE AND CLEANING
18 TROUBLESHOOTING
21 INSTALLATION
22 TECHNICAL INFORMATION

ENVIRONMENT CONCERNS

Recycle the materials with the symbol . Put the packaging in applicable
containers to recycle it.
Help protect the environment and human health and to recycle waste of electrical

and electronic appliances. Do not dispose appliances marked with the symbol
with the household waste. Return the product to your local recycling facility or
contact your municipal office.

VISIT OUR WEBSITE FOR:

- Products

- Brochures

- User manuals

- Trouble shooter

- Service information

www.aeg.com

LEGEND

Warning - Important Safety information.
General information and tips
Environmental information

Subject to change without notice

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please spend
a few minutes reading to get the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect, from
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…

ENGLISH 3

Visit the webshop at:
www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate.

Model
PNC
Serial Number

4

SAFETY INFORMATION

Before the installation and use of the
appliance, carefully read the supplied
instructions. The manufacturer is not re­sponsible if an incorrect installation and
use causes injuries and damages. Al­ways keep the instructions with the ap­pliance for future reference.

CHILDREN AND VULNERABLE
PEOPLE SAFETY

WARNING!

Risk of suffocation, injury or per­manent disability.

• Do not let persons, children inclu­ded, with reduced physical sensory,
reduced mental functions or lack of
experience and knowledge use the
appliance. They must have supervi­sion or instruction for the operation
of the appliance by a person who is
responsible for their safety. Do not
let children play with the appliance.

• Keep all packaging away from chil­dren. There is the risk of suffocation
and injury.

• Keep all detergents away from chil­dren.

• Keep children and pets away from
the appliance door when it is open.

INSTALLATION

WARNING!

This appliance must be installed
by a qualified or competent per­son.

• Remove all the packaging.

• Do not install or use a damaged ap­pliance.

• Do not install or use the appliance
where the temperature is less than 0
°C.

• Obey the installation instruction sup­plied with the appliance.

Water connection

• Make sure not to cause damage to
the water hoses.

• Before you connect the appliance to
new pipes or pipes not used for a
long time, let the water flow until it is
clean.

• The first time you use the appliance,
make sure that there is no leakage.

•

WARNING!

Dangerous voltage.

The water inlet hose has a safety
valve and a sheath with an inner
mains cable.

• If the water inlet hose is damaged,
immediately disconnect the mains
plug from the mains socket. Contact
Service to replace the water inlet
hose.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• The appliance must be earthed.

• Make sure that the electrical informa­tion on the rating plate agrees with
the power supply. If not, contact an
electrician.

• Always use a correctly installed
shockproof socket.

• Do not use multi-plug adapters and
extension cables. There is a risk of
fire.

• Make sure not to cause damage to
the mains plug and to the mains ca­ble. Contact Service or an electrician
to change a damaged mains cable.

• Connect the mains plug to the mains
socket only at the end of the installa­tion. Make sure that there is access
to the mains plug after the installa­tion.

• Do not pull the mains cable to dis­connect the appliance. Always pull
the mains plug.

• Only for UK and Ireland. The appli­ance has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS

1362) fuse.

USE

WARNING!

Risk of injury.

• Use this appliance in a household en­vironment.

• Do not change the specification of
this appliance.

• Put knives and cutlery with sharp
points in the cutlery basket with the
points down or in a horizontal posi­tion.

• Do not keep the appliance door
open without supervision to prevent
to fall on it.

• Do not sit or stand on the open door.

• Dishwasher detergents are danger­ous. Obey the safety instructions on
the detergent packaging.

ENGLISH 5

• Do not drink and play with the water
in the appliance.

• Do not remove the dishes from the
appliance until the programme is
completed. There can be detergent
on the dishes.

WARNING!

Risk of electrical shock, fire or
burns.

• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.

• Do not use water spray and steam to
clean the appliance.

• The appliance can release hot steam
if you open the door while a pro­gramme operates.

DISPOSAL

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the
mains supply.

• Cut off the mains cable and dispose
of it.

• Remove the door catch to prevent
children and pets to get closed in the
appliance.

6

PRODUCT DESCRIPTION

Worktop

1

Top spray arm

2

Upper spray arm

3

Lower spray arm

4

Filters

5

Rating plate

6

Salt container

7

13

12

11

10

2

1

5

9

8

6

7

Water hardness dial

8

Rinse aid dispenser

9

Detergent dispenser

10

Cutlery basket

11

Lower basket

12

Upper basket

13

4

3

CONTROL PANEL

ENGLISH 7

1

On/off button

1

Programme guide

2

Program touchpad

3

Programme indicators

4

Display

5

ABC

3

2

4

8

Indicators Description

Multitab indicator.

ÖKO PLUS indicator.

ExtraHygiene indicator.

5 6

79

Delay touchpad

6

Start touchpad

7

Indicators

8

Option touchpad

9

Washing phase indicator.

Rinsing phase indicator.

Drying phase indicator.

End indicator.

Rinse aid indicator. This indicator is off while the
programme operates.

Salt indicator. This indicator is off while the pro­gramme operates.

Delay indicator.

Door indicator. It comes on when the door is not
closed.

8

PROGRAMMES

Programme Type of soil

Programme phases Options

Type of load

1)

All
Crockery, cutlery,
pots and pans

Prewash
Wash 45 °C or 70 °C
Rinses

ExtraHygiene
ÖKO PLUS

Dry

2)

Heavy soil
Crockery, cutlery,
pots and pans

Prewash
Wash 70 °C
Rinses

ÖKO PLUS

Dry

3)

Normal soil
Crockery and cut­lery

Prewash
Wash 50 °C
Rinses
Dry

4)

Fresh soil
Crockery and cut-

Wash 60 °C
Rinse

ExtraHygiene

lery

5)

Normal soil
Crockery and cut­lery

Prewash
Wash 50 °C
Rinses

ExtraHygiene
ÖKO PLUS

Dry

6)

Mixed soil
Crockery, cutlery,
pots and pans

Prewash
Wash 70 °C
Rinses

ÖKO PLUS

Dry

Normal or light soil
Delicate crockery
and glassware

7)

1)

The appliance senses the type of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy consumption
and the programme duration.

2)

This programme includes the ExtraHygiene option.

3)

This is the most silent washing programme. The pump works at a very low speed to
decrease the level of noise. Because of the low speed, the programme duration is long.

4)

With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.

5)

This is the standard programme for test institutes. With this programme you have the most
efficient use of water and energy consumption for crockery and cutlery with normal soil.
Refer to the supplied leaflet for test information.

6)

With this programme you can wash a load with mixed soil. Very heavy soil in the lower
basket and normal soil in the upper basket. The water pressure and the water temperature
in the lower basket are higher than in the upper basket.

7)

Use this programme to quickly rinse the dishes. This prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.

All Prewash

Wash 45 °C
Rinses
Dry

ÖKO PLUS

ENGLISH 9

Consumption values

Programme

1)

Energy (kWh) Water (l)

0.9 - 1.7 8 - 15

1.4 - 1.6 13 - 14

1.1 - 1.2 9 - 11

0.8 9

0.9 - 1.0 9 - 11

1.3 - 1.5 14 - 15

0.8 - 0.9 11 - 12

0.1 4

1)

The display shows the programme duration.
The water pressure and temperature, the variations of the mains supply, the options and

the quantity of dishes can change the programme duration and the consumption values.

10

OPTIONS

MULTITAB FUNCTION

Activate this function only when you
use the combi detergent tablets.
This function deactivates the flow of
rinse aid and salt. The related indicators
are off.
The programme duration can increase.

ÖKO PLUS

This function decreases the tempera­ture in the drying phase. The energy
consumption decreases by 25%.
The dishes can be wet at the end of the
programme. We recommend that you
keep the door ajar and let the dishes
dry.

EXTRAHYGIENE

This function gives better results for the
hygiene. During the rinsing phase, the
temperature stays at 70 °C for 10 to 14
minutes.

ACTIVATING THE OPTIONS

• Activate or deactivate the options
before the start of a programme. You
cannot activate or deactivate the op­tions while a programme operates.

• It is not possible to activate the Ex-

traHygiene function and the ÖKO
PLUS function together.

Press
Option
touch­pad

1 time on off off
2 times off on off
3 times on on off
4 times off off on
5 times on off on
6 times off off off

If you stop to use the combi
detergent tablets, before you start
to use separately detergent, rinse aid
and dishwasher salt, do these steps:

1. Deactivate the multitab function.

2. Adjust the water softener to the

highest level.

3. Make sure that the salt container

and the rinse aid dispenser are full.

4. Start the shortest programme with a

rinsing phase, without detergent
and without dishes.

5. Adjust the water softener to the wa-

ter hardness in your area.

6. Adjust the released quantity of rinse

aid.

BEFORE FIRST USE

ENGLISH 11

1. Make sure that the set level of the

water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your lo­cal water authority to know the wa­ter hardness in your area.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Processing residues can stay in the

appliance. Start a programme to re­move them. Do not use detergent
and do not load the baskets.

If you use the combi detergent
tablets, activate the multitab
function. These tablets contain

ADJUSTING THE WATER
SOFTENER

Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these miner­als.
The dishwasher salt keeps the water
softener clean and in good conditions.
Refer to the table to adjust the water
softener to the right level. It makes sure
that the water softener uses the correct
quantity of dishwasher salt and water.

You must adjust the water soft­ener manually and electronical­ly.

detergent, rinse aid and other
added agents. Be sure that
these tablets are applicable to
the water hardness in your area.
Refer to the instructions on the
packaging of the products.

Water hardness

German
degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

51 - 70 91 - 125 9.1 - 12.5 64 - 88

43 - 50 76 - 90 7.6 - 9.0 53 - 63

37 - 42 65 - 75 6.5 - 7.5 46 - 52

29 - 36 51 - 64 5.1 - 6.4 36 - 45

23 - 28 40 - 50 4.0 - 5.0 28 - 35

19 - 22 33 - 39 3.3 - 3.9 23 - 27

Water softener

adjustment

Manual Elec-

2

2

1)

2

1)

2

1)

2

1)

2
15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2

< 4 < 7 < 0.7 < 5

1)

Factory position.

2)

Do not use salt at this level.

2)

1

tronic

1)

1)

10

9

8

7

6

1)

5

2)

1

12

Manual adjustment

Turn the water hardness dial to the po­sition 1 or 2.

Electronic adjustment

1. Press the on/off button to activate

the appliance.

2. Make sure that the appliance is in

setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.

3. Press and hold Delay and Start at

the same time until the indicators
(A), (B) and (C) flash.

4. Press Program.

FILLING THE SALT CONTAINER

• The indicators (B) and (C) go off.

• The indicator (A) continues to

flash.

• The display shows the setting of
the water softener. Example:
= level 5.

5. Press Program again and again to

change the setting.

6. Deactivate the appliance to confirm.

CAUTION!

Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion. To
prevent it, after you fill the salt
container, start a programme.

1. Turn the cap counterclockwise and

open the salt container.

2. Put 1 litre of water in the salt con-

tainer (only for the first time).

3. Fill the salt container with dish-

washer salt.

4. Remove the salt around the open-

ing of the salt container.

5. Turn the cap clockwise to close the

salt container.

FILLING THE RINSE AID DISPENSER

ENGLISH 13

A

B

CAUTION!

Only use rinse aid for dishwash­ers. Other products can cause
damage to the appliance.

A

X

M

2

1

3

4

+

-

The rinse aid, during the last
rinsing phase, helps to dry the
dishes without streaks and
stains.

C

1. Press the release button (D) to

D

open the lid (C).

2. Fill the rinse aid dispenser (A), no

more than the mark 'max'.

3. Remove the spilled rinse aid with

an absorbent cloth to prevent too
much foam.

4. Close the lid. Make sure that the

release button locks into position.

You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 (highest quantity).

14

DAILY USE

1. Open the water tap.

2. Press the on/off button to activate

the appliance. Make sure that the
appliance is in setting mode. Refer
to ’SETTING AND STARTING A
PROGRAMME’.

• If the salt indicator is on, fill the
salt container.

• If the rinse aid indicator is on, fill
the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct pro-

gramme for the type of load and
soil.

LOADING THE BASKETS

Refer to the supplied leaflet with
examples of the load of the bas­kets.

• Only use the appliance to wash items
that are dishwasher-safe.

• Do not put in the appliance items
made of wood, horn, aluminium,
pewter and copper.

• Do not put in the appliance items
that can absorb water (sponges,
household cloths).

• Remove remaining food from the
items.

• Make soft the remaining burned food
on the items.

• Put hollow items (cups, glasses and
pans) with the opening down.

• Make sure that cutlery and dishes do
not bond together. Mix spoons with
other cutlery.

• Make sure that glasses do not touch
other glasses.

• Put small items in the cutlery basket.

• Put light items in the upper basket.
Make sure that the items do not
move.

• Make sure that the spray arms can
move freely before you start a pro­gramme.

USING THE DETERGENT

M

A

X

1

2

3

4

+

-

ENGLISH 15

B

A

30

20

C

SETTING AND STARTING A
PROGRAMME

Setting mode

The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:

• All the programme indicators come
on.

• The display shows two horizontal sta­tus bars.

If the control panel shows other condi­tions, press and hold Delay and Start
at the same time until the appliance is
in setting mode.

Starting a programme without
delay start

CAUTION!

Use only detergents for dish­washers.

1. Press the release button (B) to
open the lid (C).

2. Put the detergent in the compart­ment (A) .

3. If the programme has a prewash
phase, put a small quantity of de­tergent on the inner part of the ap­pliance door.

4. If you use detergent tablets, put
the tablet in the compartment (A).

5. Close the lid. Make sure that the
release button locks into position.

Do not use more than the cor­rect quantity of detergent. Refer
to the instructions on the deter­gent packaging.

Detergent tablets do not fully
dissolve with short programmes
and detergent residues can stay
on the dishes.
We recommend that you use
detergent tablets with long pro­grammes.

1. Open the water tap.

2. Press the on/off button to activate

the appliance.

3. Close the appliance door.

4. Make sure that the appliance is in

setting mode.

5. Press Program again and again un-

til the indicator of the programme
that you want to set comes on.

• The programme duration flashes
in the display.

• The phase indicators of the set
programme come on.

6. If you want, you can set the options.

7. Press Start. The programme starts.

• Only the indicator of the phase in
operation stays on.

16

• The display shows the pro­gramme duration that decreases
with steps of 1 minute.

Starting a programme with
delay start

1. Set the programme and the op-

tions.

2. Press Delay again and again until

the display shows the delay time
you want to set (from 1 to 24 hours).

• The delay time flashes in the dis­play.

• The delay indicator is on.

3. Press Start. The countdown starts.

• The display shows the countdown
of the delay start that decreases
with steps of 1 hour.

• The phase indicators of the set
programme go off.

• When the countdown is completed,
the programme starts.

– The indicator of the phase in oper-

ation comes on.

Opening the door while the
appliance operates

If you open the door, the appliance
stops. When you close the door, the
appliance continues from the point of
interruption.

Cancelling the delay start while
the countdown operates

Press Delay again and again until:

• The display shows the programme
duration.

• The phase indicators come on.

• The programme starts.

Press and hold Delay and Start at the
same time until:

• All the programme indicators come
on.

• The display shows two horizontal sta­tus bars.

Make sure that there is deter­gent in the detergent dispenser
before you start a new pro­gramme.

At the end of the programme

When the programme is completed,
the end indicator is on and the display
shows 0.

1. Open the appliance door.

2. Press the on/off button to deacti-

vate the appliance.

3. Close the water tap.

If you do not press the on/off
button, the AUTO OFF device
automatically deactivates the
appliance after some minutes.
This helps to decrease the ener­gy consumption.

• For better drying results, keep the
appliance door ajar for some mi­nutes.

• Let the dishes become cold before
you remove them from the appli­ance. Hot dishes can be easily dam­aged.

• First remove the items from the lower
basket, then from the upper basket.

There can be water on the sides
and on the door of the appli­ance. Stainless steel becomes
cool more quickly than the
dishes.

Cancelling the programme

CARE AND CLEANING

ENGLISH 17

WARNING!

Before maintenance, deactivate the ap­pliance and disconnect the mains plug
from the mains socket.

CLEANING THE FILTERS

C

C

A

B

A1

A2

Dirty filters and clogged spray
arms decrease the washing re­sults.
Make a check regularly and, if
necessary, clean them.

1. Turn the filter (A) counter-

clockwise and remove it.

2. To disassemble the filter (A),
pull apart (A1) and (A2).

3. Remove the filter (B).

4. Wash the filters with water.

5. Put the filter (B) to its initial

position. Make sure that it
assembles correctly under
the two guides (C).

6. Assemble the filter (A) and
put it into position in filter
(B). Turn it clockwise until it
locks.

An incorrect position of
the filters can cause bad
washing results and dam­age to the appliance.

CLEANING THE SPRAY ARMS

Do not remove the spray arms.
If the holes in the spray arms are clog­ged, remove remaining parts of soil
with a thin pointed object.

EXTERNAL CLEANING

Clean the appliance with a moist soft
cloth.

Only use neutral detergents. Do not
use abrasive products, abrasive clean­ing pads or solvents.

18

TROUBLESHOOTING

The appliance does not start or it stops
during operation.
First try to find a solution to the prob­lem (refer to the table). If not, contact
Service.

With some problems, the display
shows an alarm code:

•

- The appliance does not fill with

water.
Problem Possible cause Possible solution
The programme

does not start.
The appliance door is open. Close the appliance door.
You did not press Start. Press Start.
The fuse in the fuse box is

The delay start is set. Cancel the delay start or

The appliance does
not fill with water.

The water pressure is too

The water tap is clogged or

The filter in the water inlet

The water inlet hose has a

The anti-flood device is on.

The appliance does
not drain the water.

The water drain hose has a

After the checks are completed, acti­vate the appliance. The programme
continues from the point of interrup­tion.

The mains plug is not con­nected in the mains socket.

damaged.

The water tap is closed. Open the water tap.

low.

there is limescale on it.

hose is clogged.

kink or a bend.

There are water leakages in
the appliance.

The sink spigot is clogged. Clean the sink spigot.

kink or a bend.

•

- The appliance does not drain

the water.

•

- The anti-flood device is on.

WARNING!

Deactivate the appliance before
you make the checks.

Connect the mains plug.

Replace the fuse.

wait for the end of the
countdown.

Contact your local water au­thority.

Clean the water tap.

Clean the filter.

Make sure that the position
of the hose is correct.

Close the water tap and
contact Service.

Make sure that the position
of the hose is correct.

If the problem occurs again, contact
Service.
If the display shows other alarm codes,
contact Service.

ENGLISH 19

THE WASHING RESULTS AND DRYING RESULTS ARE NOT
SATISFACTORY

Problem Possible cause Possible solution
The dishes are not

clean.
The filters are not correctly

The spray arms are clog-

The programme was not

Incorrect position of the

The spray arms could not

The quantity of detergent

There was no detergent in

Limescale particles
on the dishes.

The set level of the water

The cap of the salt contain-

Whitish streaks and
stains or bluish lay­ers on glasses and
dishes.

The filters are clogged. Clean the filters.

assembled and installed.

ged.

applicable for the type of
load and soil.

items in the baskets. Water
could not wash all items.

turn freely.

was not sufficient.

the detergent dispenser.

The salt container is empty. Make sure that there is dish-

softener is incorrect.

er is loose.
The released quantity of

rinse aid is too much.

Make sure that the filters are
correctly assembled and in­stalled.

Remove remaining soil with a
thin pointed object.

Make sure that the pro­gramme is applicable for the
type of load and soil.

Make sure that the position
of the items in the baskets is
correct and that the water
can easily wash all items.

Make sure that the position
of the items in the baskets is
correct and does not cause
the blockage of the spray
arms.

Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.

Make sure that you add de­tergent in the dispenser be­fore you start a programme.

washer salt in the salt con­tainer.

Make sure that the set level
of the water softener agrees
with the water hardness in
your area.

Tighten the cap.

Decrease the released quan­tity of rinse aid .

20

Problem Possible cause Possible solution
The quantity of detergent

Dry water drop
stains on glasses
and dishes.

The quality of the detergent

The dishes are wet. • The programme had no

The dishes are wet
and matt.

The quality of the rinse aid

The quality of the combi

was too much.

The released quantity of
rinse aid was not sufficient .

can be the cause.

drying phase.

• The programme had a
low temperature drying
phase.

The rinse aid dispenser is
empty.

can be the cause.

detergent tablets can be
the cause.

Activating the rinse aid
dispenser with the multitab
function activated

1. Press the on/off button to activate

the appliance.

2. Make sure that the appliance is in

setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.

3. Press and hold Delay and Start at

the same time until the indicators
(A), (B) and (C) flash.

4. Press Option .

• The indicators (A) and (C) go off.

5. Press Option to change the setting.

6. Deactivate the appliance to confirm.

7. Adjust the released quantity of rinse

8. Fill the rinse aid dispenser.

Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.

Increase the released quanti­ty of rinse aid.

Try a different brand of de­tergent.

For better drying results,
keep the door ajar for some
minutes.

Make sure that there is rinse
aid in the rinse aid dispenser.

Try a different brand of rinse
aid.

• Try a different brand of
combi detergent tablets.

• Activate the rinse aid dis­penser and use the rinse
aid together with the com­bi detergent tablets.

• The indicator (B) continues to

flash.

• The display shows the setting of
the rinse aid dispenser.

Off

On

aid.

INSTALLATION

WARNING!

Refer to “SAFETY INFORMA­TION”.

INSTALLATION UNDER A KITCHEN COUNTER

ENGLISH 21

820 mm

3

570-600 mm

600 mm

1

1. Make sure that the dimen-

sions of the recess agree
with the dimensions in the
figure.

2. Put the appliance adjacent

to a water tap and a water
drain.

3. Remove the worktop of the

appliance.

4. Loosen or tighten the ad-

justable feet for a correct
level of the appliance.

With a correct level the ap­pliance door closes and
seals correctly.

5. Install the appliance under

2

4

the kitchen counter.

22

WATER DRAIN CONNECTION

max. 850 mm

max.
4000 mm

min. 400 mm

A

Connect the water drain hose to:

• The sink spigot. Attach the water
drain hose under the kitchen counter.
This prevents that waste water from
the sink goes back to the appliance.

• A stand pipe with vent-hole. The in­ternal diameter must be minimum 40
mm.

Remove the sink plug when the appli­ance drains. This prevents water to go
back to the appliance.
An extension hose for the water drain
hose must be shorter than 2 m and with
the same diameter as the water drain
hose.

If you connect the water drain hose to a
trap spigot under the sink, remove the
plastic membrane (A). A not complete
removal of the membrane causes a
blockage in the spigot and problems
with drain.
The appliance has a non-return valve
that prevents dirty water to go back to
the appliance. If there is a non-return
valve in the sink spigot, remove it to
prevent the appliance to drain incor­rectly.

TECHNICAL INFORMATION

Dimensions Width / Height / Depth (mm) 596 / 850 / 610
Electrical connection Refer to the rating plate.
Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )

Water supply
Capacity Place settings 12

1)

Connect the water inlet hose to a water tap with a 3/4'' thread.

2)

If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.

1)

Cold water or hot water

2)

max. 60 °C

ENGLISH 23

www.aeg.com/shop 117931430-A-192011