AEG-Electrolux FAV675I-S, FAV675I-W AN, FAV675I-B I, FAV675I-W NSFS, FAV675I M User Manual
...Specifications and Main Features
- Dishwasher: OKO_FAVORIT 675i
- Volume: Fits 12 standard place settings
- Water supply: At least 1 bar and a maximum of 10 bar
- Energy consumption (Normal 65°C program): 1.3 kWh per standard wash
- Water intake (Normal 65°C program): 15 liters per cycle
- Wash programs:
- Extra Pre-wash
- Intensive 65° C
- Standard 65° C
- Standard BIO 50° C
- Economy BIO 50° C
- Quick 50° C
- Capacity of rinse aid dispenser: Around 150 cm³
- Capacity of detergent dispenser: From 20 up to 40 ml, depending on the level of soiling
- Indicator for salt refill
- Indicator for replenishing rinse aid
- Upper basket with height adjustability
- Interface with the program selector and the operation light
- Safety functions: Water protection system, overflow prevention
Frequently Asked Questions
Q: What is the maximum number of sets that OKOFAVORIT 675i can hold?
A: The maximum number of sets that OKOFAVORIT 675i can hold is 12.
Q: What should not be washed using the dishwasher?
A: Do not dishwasher wooden boards, parts made of plastic that are tormented by hot water, tin dishes, glued pottery and knives made of non-rust stainless steel.
Q: What steps can I take to troubleshoot my dishwasher that will not start?
A: First and foremost, check that the door is fully closed and also ensure that the water source tap is switched on.
Q: What are the conditions that require me to refill the dishwasher salt?
A: It is best to top it up when the indicator that alerts the user on salt deficiency turns on.
Q: Is it possible to utilize standard dishwashing soap manually in the dishwasher?
A: Certainly not, it is critical that only recommended brands of dishwasher soap be used as it was intended to be. Without a doubt, normal dishwashing soaps will lead to excessive soap suds and this is entirely an unwanted outcome.
Q: In what sequence should the plates be positioned into the machine?
A: Bigger plates that are heavily soiled should be placed towards the lower end and smaller and more delicate plates towards the upper part of the machine, however, this is on the condition all the plates can have water sprayed onto them.
Q: What is the ideal water hardness for the machine that I am using?
A: There is a variable between the localities that need to be taken into account, therefore the water supplier would be the most suitable person to inform this.
User Manual
Loading...