Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed
with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great
results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
Page 3
1.
ENGLISH3
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with
the appliance for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included, with reduced
physical sensory, reduced mental functions or lack of
experience and knowledge use the appliance. They
must have supervision or instruction for the operation
of the appliance by a person who is responsible for
their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door
when it is open.
• If the appliance has a child safety device, we recommend you activate it.
2.
1.2 General Safety
• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• Do not change the specification of this appliance.
• Obey the maximum load volume of 6 kg (refer to the
“Programme chart” chapter).
SAFETY INSTRUCTIONS
Page 4
www.electrolux.com
4
2.1 Installation
• Remove all the packaging and the
• Keep the transit bolts. When you move
• Do not install or use a damaged appli-
• Do not install or use the appliance
• Obey the installation instruction sup-
• Make sure that the floor where you in-
• Do not install the appliance where the
• Always be careful when you move the
• Make sure that there is air circulation
• Adjust the feet to have the necessary
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information
• Always use a correctly installed shock-
• Do not use multi-plug adapters and ex-
• Make sure not to cause damage to the
• Connect the mains plug to the mains
• Do not pull the mains cable to discon-
transit bolts.
the appliance again you must block the
drum.
ance.
where the temperature is less than 0 °C
or where it is exposed to the weather.
plied with the appliance.
stall the appliance is flat, stable, heat
resistant and clean.
appliance door can not be fully opened.
appliance because it is heavy. Always
wear safety gloves.
between the appliance and the floor.
space between the appliance and the
carpet.
WARNING!
Risk of fire and electrical shock.
on the rating plate agrees with the power supply. If not, contact an electrician.
proof socket.
tension cables.
mains plug and to the mains cable.
Should the appliance power supply cable need to be replaced, this must be
carried out by our Service Centre.
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
nect the appliance. Always pull the
mains plug.
• Do not touch the mains cable or the
mains plug with wet hands.
• This appliance complies with the E.E.C.
Directives.
Water connection
• Make sure not to cause damage to the
water hoses.
• The appliance is to be connected to the
water mains using the new supplied
hose-sets. Old hose sets must not be
reused.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
2.2 Use
WARNING!
Risk of injury, electrical shock, fire,
burns or damage to the appliance.
• Use this appliance in a household environment.
• Do not change the specification of this
appliance.
• Obey the safety instructions on the detergent packaging.
• Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
• Do not touch the glass of the door
while a programme operates. The glass
can be hot.
• Make sure that you remove all metal
objects from the laundry.
• Do not put a container to collect possible water leakage under the appliance.
Contact the Service to ensure which
accessories can be used.
2.3 Care and Cleaning
WARNING!
Risk of injury or damage to the
appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug
from the mains socket.
• Do not use water spray and steam to
clean the appliance.
Page 5
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
2.4 Disposal
WARNING!
Risk of injury or suffocation.
3. PRODUCT DESCRIPTION
123
Worktop
1
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
Detergent dispenser
2
Control panel
3
Door handle
4
Rating plate
5
Drain pump filter
4
5
6
Feet for the appliance level
7
3.1 Fixing plate kit
(4055171146)
Available from your authorized dealer.
6
If you install the appliance on a plinth, secure the appliance in the fixing plates.
Follow the instructions supplied with the
7
kit.
ENGLISH5
4. CONTROL PANEL
12
5 košil
Outdoor
Lůžkoviny
Záclony
Hedvábí
Dámské
prádlo
Odstřeďování/
Vypouštění
On Off button
1
Na/Vyp
Bavlna
Máchání
Bavlna Eco
Syntetické
Jemné
Vlna/Ruční praní
Jeans
Tepl o t a
ní
Odstředě
(Na/Vyp)
534
imeManager
T
6
Odložený
ředpírka
P
Start
Snadné
Extra
Žehlení
Máchání
řerušení
Start/P
7
8
9
1011
Page 6
www.electrolux.com
6
4.1 Display
Programme knob
2
Spin reduction touchpad
3
(Odstředĕní)
Temperature touchpad
4
(Teplota)
Display
5
Prewash touchpad
6
(Předpírka)
Delay start touchpad
7
(Odložený Start)
Extra rinse touchpad
8
(Extra Máchání)
Easy iron touchpad
9
(Snadné Zehlení)
Start pause touchpad
10
(Start/Přerušení)
Time Manager touchpads
11
ABCD
EFG
A)
The Temperature area:
: Temperature indicator
: Cold water indicator
B)
: Time Manager indicator.
C)
The time area:
–
: the programme duration
–
: the delay start
–
–
–
D)
E)
Washing indicators:
: the alarm codes
: the message of error
: Programme is completed.
: the child safety lock indicator.
–
: the washing phase
–
: the rinses phase
–
: the spin phase
–
: the steam phase
–
: Extra rinse permanent option.
F)
The spin area:
–
–
–
–
G)
: the Spin speed indicator
: the No Spin indicator
: the Rinse Hold indicator
: the Extra Silent indicator.
: the Door locked indicator
Page 7
5. PROGRAMMES
ENGLISH7
Programme
Temperature range
Bavlna
90° C - Cold
Bavlna Eco
60° C - 40° C
Syntetické
60° C - Cold
Jemné
40 °C - Cold
Vlna/Ruční praní
40 °C – Cold
Jeans
60 °C – Cold
Máchání
Cold
Odstřed'ování/Vy-
pouštění
Dámské prádlo
40 °C – Cold
Hedvábí
30 °C
Záclony
40 °C – Cold
Lůžkoviny
60° C - 30° C
Outdoor
30 °C
1)
Type of load and soil
Maximum load, Maximum spin
White cotton and coloured cotton (normal soil
and light soil).
6 kg, 1000 rpm
White cotton and colour-fast cotton. Normal soil.
6 kg, 1000 rpm
Synthetic items or mixed fabric items. Normal
soil.
3 kg, 1000 rpm
Delicate fabrics as acrylics, viscose, polyester
items. Normal soil.
3 kg, 1000 rpm
Machine washable wool, hand washable wool
and delicate fabrics with «hand washing» care
symbol.
2 kg, 1000 rpm
Items in denim and jersey. Also for items in dark
colours. The Extra Rinse option activates automatically.
6 kg, 1000 rpm
To rinse and spin the laundry. All fabrics.
6 kg, 1000 rpm
To spin the laundry and to drain the water in the
drum. All fabrics.
6 kg, 1000 rpm
Special programme for very delicate items, as lingerie, bras and underwear etc.
1 kg, 800 rpm
Special programme for silk and mixed synthetic
items
2 kg, 800 rpm
Special programme for curtains with prewash
phase. DO NOT put the detergent for prewash to
rinse with only water.
2 kg , 800 rpm
Special programme for one synthetic blanket, duvet, bedspread and so on.
2 kg, 800 rpm
Synthetic and delicate items. Light soil or items or
items to refresh.
2.5 kg, 800 rpm
Page 8
www.electrolux.com
8
Programme
Temperature range
5 koši
30 °C
1)
Standard programmes for the Energy Label consumption values
According to regulation 1061/2010, the “Bavlna Eco 60° C” and “Bavlna Eco 40° C” are
respectively the “standard 60° C cotton programme” and the “standard 40° C cotton
programme”. They are the most efficient programmes in terms of combined energy and
water consumption for washing normally soiled cotton laundry.
Type of load and soil
Maximum load, Maximum spin
Washing cycle to wash 5 slightly soiled shirts.
1.5 kg, 800 rpm
Programme options compatibility
Programme
■■■■■■■■
Eco
■■■■■■
■■■■■■■■
■■■■■■■
■■■■■
■■■■■■
■■■■■
1)
■■■
■■■■■
■■■
■■■■■
■■
■■■
■■■
1)
If you set No Spin option the only drain phase is available.
6. CONSUMPTION VALUES
The data of this table are approximate. Different causes can change the data:
the quantity and type of laundry, the water and ambient temperature.
Page 9
ENGLISH9
Pro-
grammes
Load
(Kg)
Energy
consumption (kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme
duration
Remain-
ing moisture (%)
(minutes)
Bavlna 60 °C61.005614660
Bavlna 40 °C60.755614560
Syntetické 40
°C
30.474512735
Jemné 40 °C30.656210035
Vlna 30 °C20.25555630
Standard cotton programmes
Standard 60
°C cotton
Standard 60
°C cotton
Standard 40
°C cotton
60.764916960
30.664015460
30.514013360
Off Mode (W)Left On Mode (W)
0.750.75
1)
At the end of spin phase.
1)
7. OPTIONS
7.1 Temperature
Set this option to change the default temperature.
Indicator
The display shows the set temperature.
7.2 Spin
With this option you can decrease the default spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
= cold water.
•
The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with the
water in the drum. The drum turns regularly to prevent the laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
•
The display shows the indicator
To drain the water refer to ‘At the
end of the programme’.
Extra Silent
• Set this option to remove all spin phases and to perform a silent washing.
• The rinse phase uses more water for
some washing programmes.
.
Page 10
www.electrolux.com
10
• The washing programme stops with the
• The door stays locked. You must drain
•
7.3 Prewash
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
7.4 Delay Start
With this option you can delay the start of
a programme from 30 minutes to 20
hours.
The display shows the related indicator.
7.5 Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to detergents and in areas where the water is
soft.
The related indicator comes on.
7.6 Easy Iron
The appliances carefully washes and
spins the laundry to prevent the creases.
The appliance decreases the spin speed
and uses more water.
The related indicator comes on.
7.7 Time Manager
When you set a washing programme, the
display shows the default duration.
Press
programme duration.
The Time Manager is available only with
the programmes in the table.
water in the drum. The drum turns regularly to prevent the laundry creases.
the water to unlock the door.
The display shows the indicator
To drain the water refer to ‘At the
end of the programme’.
or to decrease or increase the
.
Eco
Indicator
■■■
1)
■■■■■
■■■
■■■■■■
■■■
■2)■
2)
■
2)
■
■
■■■
■■
3)
1)
Shortest: to fresh the laundry.
2)
Programme default duration.
3)
Longest: for laundry with heavy soil.
■2)■
2)
■
■
7.8 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate the option,
press
until the indicator
off.
You can activate this option:
• After you press
the programme knob are locked.
• Before you press
cannot start.
and at the same time
comes on/goes
, the options and
: the appliance
7.9 Permanent extra rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press
the indicator
and at the same time until
comes on/goes off.
2)
7.10 Acoustic signals
The acoustic signals operate when:
Page 11
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press
for 6 seconds.
and at the same time
8. BEFORE FIRST USE
ENGLISH11
If you deactivate the acoustic signals, they continue operate when
the appliance has a malfunction.
1.
Put 2 litre of water in the detergent
compartment for washing phase. This
activates the drain system.
2.
Put a small quantity of detergent in
the compartment for washing phase.
9. DAILY USE
9.1 Loading the laundry
9.2 Using detergent and additives
3.
Set and start a programme for cotton
at the highest temperature without
laundry. This removes all possible dirt
from the drum and the tub.
1.
Open the appliance door.
2.
Put the laundry in the drum, one item
at a time. Shake the items before you
put them in the appliance. Make sure
not to put too much laundry in the
drum.
3.
Close the door.
CAUTION!
Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
• Measure out the detergent and the fabric conditioner.
• Carefully close the detergent drawer.
Detergent compartment for prewash phase.
Page 12
www.electrolux.com
12
Bleach
Alternatively the softener, it is also possible to use a bleach agent in the compartment
Proceed as follows:
•
• Run a programme for white cottons.
• At the end of the programme, run the programme RINSE. Use softener, if desired.
Liquid or powder detergent
Detergent compartment for washing phase.
Compartment for liquid additives (fabric conditioner, starch).
Flap for powder or liquid detergent.
with the programmes for white cottons.
Put the bleach in the compartment
tergent dispenser drawer.
This helps to eliminate any bleach residues.
Never pour bleach and softener into the compartment at the same time.
. Do not exceed the «MAX» mark in the de-
1.
A
2.
1
2
3.
4.
B
Page 13
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.
9.3 Activating the appliance
Press the Na/Vyp button to activate or
deactivate the appliance. A tune sounds
when the appliance is activated.
9.4 Setting a programme
1.
Turn the programme knob and set
the programme:
– The related programme indicator
comes on.
– The indicator of the
– The display shows the level of the
Time Manager, the programme du-
ration and the indicators of the pro-
gramme phases
2.
If necessary, change the temperature,
the spin speed, the cycle duration, or
add available options. When you activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message Err.
flashes.
9.5 Starting a programme
without delay start
Press :
•The indicator
stays on.
•
The indicator
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
• The drain pump can operate for a short
time when the appliance fills water.
stops to flash and
starts to flash on the
.
9.6 Starting a programme with
delay start
•
• Press
To cancel the delay start:
1.
2.
9.7 Interrupting a programme
and changing the options
You can change only some options before they operate.
1.
2.
3.
ENGLISH13
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts automatically the programme duration
agree with the laundry load.
• The display shows the new value.
Press
play shows the delay you want to set.
The related indicator comes on the display.
– The appliance starts the countdown.
– When the countdown is completed,
again and again until the dis-
:
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
.
Press to set the appliance to
pause.
Press until the display shows ’.
Press
gramme immediately.
Press . The indicator flashes.
Change the options.
Press again. The programme con-
tinues.
again to start the pro-
Page 14
www.electrolux.com
14
9.8 Cancelling a programme
1.
2.
9.9 Opening the door
While a programme or the delay start operates, the appliance door is locked and
the display shows the indicator
Open the appliance door when the
delay start operates:
1.
2.
3.
4.
Open the appliance door when the
programme operates:
1.
2.
3.
4.
9.10 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is acti-
•
•The indicator
•
• Remove the laundry from the appliance.
Press the button for some seconds to cancel the programme and to
deactivate the appliance.
Press the same button again to activate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.
.
CAUTION!
If the temperature and level of the
water in the drum are too high,
you cannot open the door.
Press to pause the appliance.
Wait until the door lock indicator
goes off.
Open the door.
Close the door and press again.
The delay start continues to operate.
Press the button for some seconds to deactivate the appliance.
Wait for some minutes and then open
carefully the appliance door.
Close the appliance door.
Set the programme again.
vated).
In the display a
The door lock indicator goes off.
Make sure that the drum is empty.
comes on.
goes off.
• Keep the door ajar, to prevent the mildew and odours.
• Close the water tap.
•
Press the button
to deactivate the appliance.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent the
creases in the laundry.
–
The door lock indicator
door stays locked.
– You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed. If you set
ance only drains.
2.
Press . The appliance drains the
water and spins.
3.
When the programme is completed
and the door lock indicator
goes off, you can open the door.
4.
Press the button for some seconds to deactivate the appliance.
The appliance drains and spins
automatically after approximately
18 hours (except for Wool programme).
for some seconds
is on. The
, the appli-
9.11 AUTO Stand-by option
The AUTO Stand-by option automatically
deactivates the appliance to decrease the
energy consumption when:
• You do not use the appliance for 5 minutes before you press
Press the button
pliance again.
• After 5 minutes from the end of the
washing programme
Press the button
pliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a new
cycle.
.
to activate the ap-
to activate the ap-
Page 15
10. HINTS AND TIPS
ENGLISH15
10.1 The laundry load
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
• Obey the washing instructions that are
on the laundry care labels.
• Do not wash together white and coloured items.
• Some coloured items can discolour
with the first wash. We recommend that
you wash them separately for the first
times.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty the pockets and unfold the
items.
• Turn inside out multilayered fabrics,
wool and items with painted illustrations.
• Remove hard stains.
• Wash with a special detergent heavy
soil stains.
• Be careful with the curtains. Remove
the hooks or put the curtains in a washing bag or pillowcase.
• Do not wash in the appliance :
– Laundry without hems or with cuts
– Underwired bras.
– Use a washing bag to wash small
items.
• A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in the
tub and start the spin phase again.
10.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you remove these
stains before you put the items in the appliance.
Special stain removers are available. Use
the special stain remover that is applicable to the type of stain and fabric.
10.3 Detergents and additives
• Only use detergents and additives specially made for washing machines.
• Do not mix different types of detergents.
• To help the environment, do not use
more than the correct quantity of detergent.
• Obey the instructions that you find on
the on packaging of these products.
• Use the correct products for the type
and colour of the fabric, the programme
temperature and the level of soil.
• If your appliance has not the detergent
dispenser with the flap device, add the
liquid detergents with a dosing ball.
10.4 Ecological hints
• Set a programme without the prewash
phase to wash laundry with normal soil.
• Always start a washing programme with
the maximum load of laundry.
• If necessary, use a stain remover when
you set a programme with a low temperature.
• To use the correct quantity of the detergent, check the water hardness of your
domestic system
10.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you use
a water softener for washing machines. In
areas where the water hardness is soft it
is not necessary to use a water softener.
To know the water hardness in your area,
contact your local water authority.
Use the correct quantity of the water softener. Obey the instructions that you find
on the packaging of the product.
Page 16
www.electrolux.com
16
11. CARE AND CLEANING
WARNING!
Before maintenance, disconnect the appliance from the mains supply.
11.1 External cleaning
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents or
chemical products.
11.2 Descaling
If the water hardness in your area is high
or moderate, we recommend that you use
a water softener for washing machines.
Regularly examine the drum to prevent
limescale and rust particles.
11.4 Door seal
To remove rust particles use only special
products for washing machine. Do this
separately from the laundry wash.
Always obey the instructions that
you find on the packaging of the
product.
11.3 Maintenance wash
With the low temperature programmes it
is possible that some detergent stays in
the drum. Make regularly a maintenance
wash. To do this:
• Remove the laundry from the drum.
• Set the cotton programme with the
highest temperature with a small quantity of detergent.
Regularly examine the seal and remove all
objects from the inner part.
11.5 Cleaning the detergent dispenser
1.
1
2.
2
Page 17
3.4.
11.6 Cleaning the drain filter
WARNING!
Do not clean the drain filter if the
water in the appliance is hot.
1.
ENGLISH17
2.
11
2
3.4.
2
1
Page 18
www.electrolux.com
18
5.
1
2
7.8.
9.
6.
1
2
Page 19
11.7 Cleaning the inlet hose and the valve filter
ENGLISH19
1.
1
2
3
3.4.
11.8 Emergency drain
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (9) of
'Cleaning the drain filter'.
If necessary, clean the pump.
When you drain the water with the emergency drain procedure, you must activate
again the drain system:
1.
Put 2 litres of water in the main wash
compartment of the detergent dispenser.
2.
Start the programme to drain the water.
11.9 Frost precautions
If the appliance is installed in an area
where the temperature can be less than
0° C, remove the remaining water from
the inlet hose and the drain pump.
2.
45°
20°
1.
Disconnect the mains plug from the
mains socket.
2.
Close the water tap.
3.
Remove the water inlet hose.
4.
Put the two ends of the inlet hose in a
container and let the water flow out of
the hose.
5.
Empty the drain pump. Refer to the
emergency drain procedure.
6.
When the drain pump is empty, install
the inlet hose again.
WARNING!
Make sure that the temperature is
more than 0 °C before you use
the appliance again.
The manufacturer is not responsible for damages caused by low
temperatures.
Page 20
www.electrolux.com
20
12. TROUBLESHOOTING
The start of the appliance does not occur
or it stops during operation.
First try to find a solution to the problem
(refer to the table). If not, contact the service centre.
With some problems, the acoustic
signals operate and the display
shows an alarm code:
•
- The appliance does not fill with
water.
•
- The appliance does not drain
the water.
•
- The appliance door is open or
not closed correctly. Please check the
door!
•
- The mains supply is unstable.
Wait until the mains supply is stable.
WARNING!
Deactivate the appliance before
you do the checks.
ProblemPossible solution
The programme does
not start.
Make sure that the mains plug is connected to the mains
socket.
Make sure that the appliance door is closed.
Make sure that there is not a damaged fuse in the fuse
box.
Make sure that the Start/Pause has been pressed.
If the delay start is set, cancel the setting or wait for the
end of countdown.
Deactivate the Child Lock function if it is on.
The appliance does
Make sure that the water tap is open.
not fill with water.
Make sure that the pressure of the water supply is not
too low. For this information, contact your local water
authority.
Make sure that the water tap is not clogged.
Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to “Care and cleaning”.
Make sure that the inlet hose has no kinks or bends.
Make sure that the connection of the water inlet hose is
correct.
The appliance does
Make sure that the sink spigot is not clogged.
not drain the water.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the
filter, if necessary. Refer to 'Care and cleaning'.
Make sure that the connection of the drain hose is cor-
rect.
Set the drain programme if you set a programme without
drain phase.
Page 21
ENGLISH21
ProblemPossible solution
Set the drain programme if you set an option which ends
with water in the tub.
The spin phase does
Set the spin programme.
not operate or the
washing cycle lasts
longer than usually.
Make sure that the drain filter is not clogged. Clean the
filter, if necessary. Refer to 'Care and cleaning'.
Adjust manually the items in the tub and start the spin
phase again. This problem may be caused by balance
problems.
There is water on the
floor.
Make sure that the couplings of the water hoses are tight
and there is not water leakages.
Make sure that the drain hose have no damages.
Make sure you use the correct detergent and the correct
quantity of it.
You cannot open the
Make sure that the washing programme is finished.
appliance door.
Set the drain or the spin programme if there is water in
the drum.
The appliance makes
an unusual noise.
Make sure the levelling of the appliance is incorrect. Re-
fer to 'Installation'.
Make sure that the packaging and/or the transit bolts are
removed. Refer to 'Installation'.
Add more laundry in the drum. The load may be too
small.
The appliance fills with
water and drain imme-
Make sure that the drain hose is in the correct position.
The hose may be too low.
diately.
The washing results
are not satisfactory.
Increase the detergent quantity or use a different deter-
gent.
Use special products to remove the stubborn stains be-
fore you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
After the check, activate the appliance.
The programme continues from the point
of interruption.
If the problem occurs again, contact the
Service.
If the display shows other alarm codes.
Deactivate and activate the appliance. If
the problem continues, contact the Service.
Page 22
www.electrolux.com
22
13. TECHNICAL INFORMATION
DimensionsWidth / Height / Depth600 / 850 / 430 mm
Total depth487 mm
Electrical connection:Voltage
Overall power
Fuse
Frequency
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, except
where the low voltage equipment has no protection
against moisture
Water supply pressureMinimum0,5 bar (0,05 MPa)
Maximum8 bar (0,8 MPa)
Water supply
1)
Cold water
Maximum loadCotton6 kg
Spin speedMaximum1000 rpm
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
14. ENVIRONMENT CONCERNS
230 V
2200 W
10 A
50 Hz
IPX4
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
and electronic appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
Page 23
ENGLISH23
Page 24
www.electrolux.com/shop
132921700-A-282012
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.