Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed
with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great
results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH3
1.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included,
with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge use the appliance. They
must have supervision or instruction for
the operation of the appliance by a person who is responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the
appliance door when it is open.
• If the appliance has a child safety device, we recommend you activate it.
1.2 Installation
• Remove all the packaging and the
transit bolts.
• Keep the transit bolts. When you move
the appliance again you must block the
drum.
• Do not install or use a damaged appliance.
• Do not install or use the appliance
where the temperature is less than 0 °C
or where it is exposed to the weather.
• Obey the installation instruction supplied with the appliance.
• Make sure that the floor where you install the appliance is flat, stable, heat
resistant and clean.
• Do not install the appliance where the
appliance door can not be fully opened.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Make sure that there is air circulation
between the appliance and the floor.
• Adjust the feet to have the necessary
space between the appliance and the
carpet.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Contact the Service or an electrician to
change a damaged mains cable.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Do not touch the mains cable or the
mains plug with wet hands.
• This appliance complies with the E.E.C.
Directives.
Water connection
• Make sure not to cause damage to the
water hoses.
• The appliance is to be connected to the
water mains using the new supplied
hose-sets. Old hose sets must not be
reused.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
www.electrolux.com
4
1.3 Use
• Use this appliance in a household envi-
• Do not change the specification of this
• Obey the safety instructions on the de-
• Do not put flammable products or items
• Do not touch the glass of the door
• Make sure that you remove all metal
1.4 Care and Cleaning
WARNING!
Risk of injury, electrical shock, fire,
burns or damage to the appliance.
ronment.
appliance.
tergent packaging.
that are wet with flammable products
in, near or on the appliance.
while a programme operates. The glass
can be hot.
objects from the laundry.
WARNING!
Risk of injury or damage to the
appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug
from the mains socket.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
1.5 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
2. PRODUCT DESCRIPTION
123
Worktop
1
Detergent dispenser
2
Control panel
3
Door handle
4
Rating plate
4
5
6
7
5
Drain pump filter
6
Feet for the appliance level
7
2.1 Child safety device
ENGLISH5
When you activate this device, you cannot
close the door. This prevents children or
pets to be closed in the drum. To activate
the device, turn it clockwise, until the
groove is horizontal. To deactivate the device, turn it counter-clockwise, until the
groove is vertical.
2.2 Fixing plate kit
(4055171146)
Available from your authorized dealer.
3. CONTROL PANEL
12
Cottons
Synthetics
Refresh
14 Min.
Sports
Duvet
Spin/Drain
On/O
On Off button
1
Programme knob
2
Spin reduction touchpad
3
Temperature touchpad
4
Display
5
Prewash touchpad
6
Cottons
Cottons Eco
Synthetics
Delicates
Wool/Handwash
Jeans
Rinse
If you install the appliance on a plinth, secure the appliance in the fixing plates.
Follow the instructions supplied with the
kit.
534
Prewash
Easy Iron
Dealy Start
Extra Rinse
t
r
a
t
S
es
uaP
/
Temperature
Spin
imeManager
T
1011
Delay start touchpad
7
Extra rinse touchpad
8
Easy iron touchpad
9
Start pause touchpad
10
Time Manager touchpads
11
6
7
8
9
www.electrolux.com
6
3.1 Display
A)
B)
C)
D)
E)
The Temperature area:
: Temperature indicator
: Cold water indicator
: Time Manager indicator.
The time area:
–
: the programme duration
–
: the delay start
–
–
–
Washing indicators:
: the alarm codes
: the message of error
: Programme is completed.
: the child safety lock indicator.
ABCD
EFG
–
: the washing phase
–
: the rinses phase
–
: the spin phase
–
: the steam phase
–
: Extra rinse permanent option.
F)
The spin area:
–
–
–
–
G)
: the Spin speed indicator
: the No Spin indicator
: the Rinse Hold indicator
: the Extra Silent indicator.
: the Door locked indicator
4. PROGRAMMES
Programme
Temperature range
Cottons
90° C - Cold
Cottons Eco
60° C - 40° C
Synthetics
60° C - Cold
Delicates
40 °C - Cold
Type of load and soil
Maximum load, Maximum spin
White cotton and coloured cotton (normal soil
and light soil).
8 kg, 1400 rpm
1)
White cotton and colour-fast cotton. Normal soil.
8 kg, 1400 rpm
Synthetic items or mixed fabric items. Normal
soil.
4 kg, 1000 rpm
Delicate fabrics as acrylics, viscose, polyester
items. Normal soil.
4 kg, 800 rpm
ENGLISH7
Programme
Temperature range
Wool/Handwash
40 °C – Cold
Type of load and soil
Maximum load, Maximum spin
Machine washable wool, hand washable wool
and delicate fabrics with «hand washing» care
symbol.
2 kg, 1000 rpm
Jeans
60 °C – Cold
Items in denim and jersey. Also for items in dark
colours. The Extra Rinse option activates automatically.
4 kg, 1000 rpm
Rinse
Cold
Spin/Drain
To rinse and spin the laundry. All fabrics.
8 kg, 1400 rpm
To spin the laundry and to drain the water in the
drum. All fabrics.
8 kg, 1400 rpm
Duvet
60° C - 30° C
Sports
30 °C
14 Min.
30 °C
Special programme for one synthetic blanket, duvet, bedspread and so on.
2.5 kg, 800 rpm
Synthetic and delicate items. Light soil or items to
refresh.
2.5 kg, 800 rpm
Synthetic and mixed fabric items. Light soil and
items to freshen up.
1 kg, 800 rpm
Steam — Refresh
Steam — Synthetics
Steam — Cottons
1)
Standard programmes for the Energy Label consumption values
According to regulation 1061/2010, the “Coton Eco 60° C” and “Coton Eco 40° C” are
respectively the “standard 60° C cotton programme” and the “standard 40° C cotton
programme”. They are the most efficient programmes in terms of combined energy and
water consumption for washing normally soiled cotton laundry.
The washing temperature of the washing phase may differ from the temperature declared for the selected programme.
Steam programme for cotton and synthetic
This cycle removes odours from the laundry.
Steam programme for synthetics.
This cycle helps to dewrinkle the laundry
Steam programme for cottons.
This cycle helps to dewrinkle the laundry
Programme options compatibility
Programme
■■■■■■■■
Eco
■■■■■
www.electrolux.com
8
Programme
■■■■■■■■
■■■■■■■■
■■■■■■■
■■■■■■■■
■■■■■■■
1)
■■■■■■■
■■
■■■■■■■
■■■
1)
If you set No Spin option the only drain phase is available.
5. CONSUMPTION VALUES
The data of this table are approximate. Different causes can change the data:
the quantity and type of laundry, the water and ambient temperature.
Pro-
grammes
Cottons 60
°C
Cottons 40
°C
Synthetics 40
°C
Delicates 40
°C
Wool 30 °C20.35575830
Standard cotton programmes
Standard 60
°C cotton
Standard 60
°C cotton
Load
(Kg)
Energy
consumption (kWh)
81.607216844
81.07216444
40.606011035
40.70609135
80.894922544
40.754017044
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme
duration
(minutes)
Remain-
ing moisture (%)
1)
ENGLISH9
Pro-
grammes
Standard 40
°C cotton
1)
At the end of spin phase.
6. OPTIONS
6.1 Temperature
Set this option to change the default temperature.
Indicator
The display shows the set temperature.
6.2 Spin
With this option you can decrease the default spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
•
The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with the
water in the drum. The drum turns regularly to prevent the laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
•
The display shows the indicator
Load
(Kg)
Energy
consumption (kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme
duration
(minutes)
40.504016544
Off Mode (W)Left On Mode (W)
0.60.6
Extra Silent
• Set this option to remove all spin phases and to perform a silent washing.
= cold water.
• The rinse phase uses more water for
some washing programmes.
• The washing programme stops with the
water in the drum. The drum turns regularly to prevent the laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
•
The display shows the indicator
To drain the water refer to ‘At the
end of the programme’.
6.3 Prewash
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
6.4 Delay Start
With this option you can delay the start of
a programme from 30 minutes to 20
hours.
The display shows the related indicator.
6.5 Extra Rinse
With this option you can add some rinses
.
to a washing programme.
To drain the water refer to ‘At the
end of the programme’.
Remain-
ing moisture (%)
.
1)
www.electrolux.com
10
Use this option for persons allergic to detergents and in areas where the water is
soft.
The related indicator comes on.
1)
Shortest: to fresh the laundry.
2)
Programme default duration.
3)
Longest: for laundry with heavy soil.
6.6 Easy Iron
The appliances carefully washes and
spins the laundry to prevent the creases.
The appliance decreases the spin speed
and uses more water.
The related indicator comes on.
6.7 Time Manager
When you set a washing programme, the
display shows the default duration.
Press
programme duration.
The Time Manager is available only with
the programmes in the table.
or to decrease or increase the
Indicator
1)
■■
■■■
■■
■■■■
■■
2)
■
2)
■
■
■■
3)
■■
2)
■
Eco
2)
■
6.8 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate the option,
press
until the indicator
off.
You can activate this option:
• After you press
the programme knob are locked.
• Before you press
cannot start.
and at the same time
comes on/goes
, the options and
: the appliance
6.9 Permanent extra rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press
the indicator
and at the same time until
comes on/goes off.
6.10 Acoustic signals
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic signals, press
for 6 seconds.
If you deactivate the acoustic signals, they continue operate when
the appliance has a malfunction.
and at the same time
7. BEFORE FIRST USE
1.
Put 2 litre of water in the detergent
compartment for washing phase. This
activates the drain system.
2.
Put a small quantity of detergent in
the compartment for washing phase.
3.
Set and start a programme for cotton
at the highest temperature without
laundry. This removes all possible dirt
from the drum and the tub.
8. DAILY USE
8.1 Loading the laundry
8.2 Using detergent and additives
ENGLISH11
1.
Open the appliance door.
2.
Put the laundry in the drum, one item
at a time. Shake the items before you
put them in the appliance. Make sure
not to put too much laundry in the
drum.
3.
Close the door.
CAUTION!
Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
• Measure out the detergent and the fabric conditioner.
• Carefully close the detergent drawer.
Detergent compartment for prewash phase.
Detergent compartment for washing phase.
Compartment for liquid additives (fabric conditioner, starch).
Flap for powder or liquid detergent.
www.electrolux.com
12
Liquid or powder detergent
1.
2.
A
3.
4.
B
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.
8.3 Activating the appliance
Press the Marche/Arrêt button to activate
or deactivate the appliance. A tune
sounds when the appliance is activated.
2.
8.4 Setting a programme
1.
Turn the programme knob and set
the programme:
– The related programme indicator
comes on.
– The indicator of the
– The display shows the level of the
Time Manager, the programme du-
flashes.
8.5 Starting a programme
without delay start
Press :
•The indicator
ration and the indicators of the programme phases
If necessary, change the temperature,
the spin speed, the cycle duration, or
add available options. When you activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message Err.
stops to flash and
stays on.
•
The indicator
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
• The drain pump can operate for a short
time when the appliance fills water.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts automatically the programme duration
agree with the laundry load.
• The display shows the new value.
starts to flash on the
.
8.6 Starting a programme with
delay start
•
Press
play shows the delay you want to set.
The related indicator comes on the display.
• Press
– The appliance starts the countdown.
– When the countdown is completed,
To cancel the delay start:
1.
2.
again and again until the dis-
:
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
.
Press to set the appliance to
pause.
Press until the display shows ’.
Press
gramme immediately.
again to start the pro-
8.7 Interrupting a programme
and changing the options
You can change only some options before they operate.
1.
Press . The indicator flashes.
2.
Change the options.
3.
Press again. The programme continues.
8.8 Cancelling a programme
1.
Press the button for some seconds to cancel the programme and to
deactivate the appliance.
ENGLISH13
2.
Press the same button again to activate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.
8.9 Opening the door
While a programme or the delay start operates, the appliance door is locked and
the display shows the indicator
CAUTION!
If the temperature and level of the
water in the drum are too high,
you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press to pause the appliance.
2.
Wait until the door lock indicator
goes off.
3.
Open the door.
4.
Close the door and press again.
The delay start continues to operate.
Open the appliance door when the
programme operates:
1.
Press the button for some seconds to deactivate the appliance.
2.
Wait for some minutes and then open
carefully the appliance door.
3.
Close the appliance door.
4.
Set the programme again.
.
8.10 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is activated).
•
In the display a
•The indicator
•
The door lock indicator goes off.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent the mildew and odours.
• Close the water tap.
•
Press the button
to deactivate the appliance.
comes on.
goes off.
for some seconds
www.electrolux.com
14
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent the
–
– You must drain the water to open the
creases in the laundry.
The door lock indicator
door stays locked.
door.
To drain the water:
1.
If necessary, decrease the spin
speed. If you set
ance only drains.
2.
Press . The appliance drains the
water and spins.
3.
When the programme is completed
and the door lock indicator
goes off, you can open the door.
4.
Press the button for some seconds to deactivate the appliance.
The appliance drains and spins
automatically after approximately
18 hours (except for Wool programme).
is on. The
, the appli-
8.11 AUTO Stand-by option
The AUTO Stand-by option automatically
deactivates the appliance to decrease the
energy consumption when:
• You do not use the appliance for 5 minutes before you press
Press the button
pliance again.
• After 5 minutes from the end of the
washing programme
Press the button
pliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a new
cycle.
.
to activate the ap-
to activate the ap-
9. HINTS AND TIPS
9.1 The laundry load
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
• Obey the washing instructions that are
on the laundry care labels.
• Do not wash together white and coloured items.
• Some coloured items can discolour
with the first wash. We recommend that
you wash them separately for the first
times.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty the pockets and unfold the
items.
• Turn inside out multilayered fabrics,
wool and items with painted illustrations.
• Remove hard stains.
• Wash with a special detergent heavy
soil stains.
• Be careful with the curtains. Remove
the hooks or put the curtains in a washing bag or pillowcase.
• Do not wash in the appliance :
– Laundry without hems or with cuts
– Underwired bras.
– Use a washing bag to wash small
items.
• A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in the
tub and start the spin phase again.
9.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you remove these
stains before you put the items in the appliance.
Special stain removers are available. Use
the special stain remover that is applicable to the type of stain and fabric.
9.3 Detergents and additives
• Only use detergents and additives specially made for washing machines.
• Do not mix different types of detergents.
• To help the environment, do not use
more than the correct quantity of detergent.
• Obey the instructions that you find on
the on packaging of these products.
• Use the correct products for the type
and colour of the fabric, the programme
temperature and the level of soil.
• If your appliance has not the detergent
dispenser with the flap device, add the
liquid detergents with a dosing ball.
9.4 Ecological hints
• Set a programme without the prewash
phase to wash laundry with normal soil.
10. CARE AND CLEANING
ENGLISH15
• Always start a washing programme with
the maximum load of laundry.
• If necessary, use a stain remover when
you set a programme with a low temperature.
• To use the correct quantity of the detergent, check the water hardness of your
domestic system
9.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you use
a water softener for washing machines. In
areas where the water hardness is soft it
is not necessary to use a water softener.
To know the water hardness in your area,
contact your local water authority.
Use the correct quantity of the water softener. Obey the instructions that you find
on the packaging of the product.
WARNING!
Before maintenance, disconnect the appliance from the mains supply.
10.1 External cleaning
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents or
chemical products.
10.2 Descaling
If the water hardness in your area is high
or moderate, we recommend that you use
a water softener for washing machines.
Regularly examine the drum to prevent
limescale and rust particles.
To remove rust particles use only special
products for washing machine. Do this
separately from the laundry wash.
Always obey the instructions that
you find on the packaging of the
product.
10.3 Maintenance wash
With the low temperature programmes it
is possible that some detergent stays in
the drum. Make regularly a maintenance
wash. To do this:
• Remove the laundry from the drum.
• Set the cotton programme with the
highest temperature with a small quantity of detergent.
www.electrolux.com
16
10.4 Door seal
10.5 Cleaning the detergent dispenser
Regularly examine the seal and remove all
objects from the inner part.
1.
1
2
3.4.
10.6 Cleaning the drain filter
WARNING!
Do not clean the drain filter if the
water in the appliance is hot.
2.
ENGLISH17
1.
2
1
3.4.
5.
2.
1
6.
2
1
7.8.
2
1
2
www.electrolux.com
18
9.
2
1
10.7 Cleaning the inlet hose and the valve filter
1.
1
2
3
3.4.
2.
10.8 Emergency drain
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (9) of
'Cleaning the drain filter'.
If necessary, clean the pump.
When you drain the water with the emergency drain procedure, you must activate
again the drain system:
1.
Put 2 litres of water in the main wash
compartment of the detergent dispenser.
45°
20°
2.
Start the programme to drain the water.
10.9 Frost precautions
If the appliance is installed in an area
where the temperature can be less than
0° C, remove the remaining water from
the inlet hose and the drain pump.
1.
Disconnect the mains plug from the
mains socket.
2.
Close the water tap.
3.
Remove the water inlet hose.
4.
Put the two ends of the inlet hose in a
container and let the water flow out of
the hose.
5.
Empty the drain pump. Refer to the
emergency drain procedure.
6.
When the drain pump is empty, install
the inlet hose again.
11. TROUBLESHOOTING
ENGLISH19
WARNING!
Make sure that the temperature is
more than 0 °C before you use
the appliance again.
The manufacturer is not responsible for damages caused by low
temperatures.
The start of the appliance does not occur
or it stops during operation.
First try to find a solution to the problem
(refer to the table). If not, contact the service centre.
With some problems, the acoustic
signals operate and the display
shows an alarm code:
•
- The appliance does not fill with
water.
•
- The appliance does not drain
the water.
•
- The appliance door is open or
not closed correctly. Please check the
door!
•
- The mains supply is unstable.
Wait until the mains supply is stable.
WARNING!
Deactivate the appliance before
you do the checks.
ProblemPossible solution
The programme does
not start.
Make sure that the mains plug is connected to the mains
socket.
Make sure that the appliance door is closed.
Make sure that there is not a damaged fuse in the fuse
box.
Make sure that the Start/Pause has been pressed.
If the delay start is set, cancel the setting or wait for the
end of countdown.
Deactivate the Child Lock function if it is on.
The appliance does
Make sure that the water tap is open.
not fill with water.
Make sure that the pressure of the water supply is not
too low. For this information, contact your local water
authority.
Make sure that the water tap is not clogged.
Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to “Care and cleaning”.
Make sure that the inlet hose has no kinks or bends.
Make sure that the connection of the water inlet hose is
correct.
www.electrolux.com
20
ProblemPossible solution
The appliance does
not drain the water.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the
Make sure that the connection of the drain hose is cor-
Set the drain programme if you set a programme without
Set the drain programme if you set an option which ends
The spin phase does
not operate or the
washing cycle lasts
longer than usually.
Make sure that the drain filter is not clogged. Clean the
Adjust manually the items in the tub and start the spin
There is water on the
floor.
Make sure that the drain hose have no damages.
Make sure you use the correct detergent and the correct
You cannot open the
appliance door.
Set the drain or the spin programme if there is water in
The appliance makes
an unusual noise.
Make sure that the packaging and/or the transit bolts are
Add more laundry in the drum. The load may be too
The appliance fills with
water and drain immediately.
The washing results
are not satisfactory.
Use special products to remove the stubborn stains be-
Make sure that you set the correct temperature.
Make sure that the sink spigot is not clogged.
filter, if necessary. Refer to 'Care and cleaning'.
rect.
drain phase.
with water in the tub.
Set the spin programme.
filter, if necessary. Refer to 'Care and cleaning'.
phase again. This problem may be caused by balance
problems.
Make sure that the couplings of the water hoses are tight
and there is not water leakages.
quantity of it.
Make sure that the washing programme is finished.
the drum.
Make sure the levelling of the appliance is incorrect. Refer to 'Installation'.
removed. Refer to 'Installation'.
small.
Make sure that the drain hose is in the correct position.
The hose may be too low.
Increase the detergent quantity or use a different detergent.
fore you wash the laundry.
ProblemPossible solution
Decrease the laundry load.
After the check, activate the appliance.
The programme continues from the point
of interruption.
If the problem occurs again, contact the
Service.
12. TECHNICAL INFORMATION
DimensionsWidth / Height / Depth600 / 850 / 605 mm
Total depth640 mm
Electrical connection:Voltage
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, except
where the low voltage equipment has no protection
against moisture
Water supply pressureMinimum0,5 bar (0,05 MPa)
Water supply
1)
Maximum loadCotton8 kg
Spin speedMaximum1400 rpm
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
Overall power
Fuse
Frequency
Maximum8 bar (0,8 MPa)
Cold water
ENGLISH21
If the display shows other alarm codes.
Deactivate and activate the appliance. If
the problem continues, contact the Service.
230 V
2200 W
10 A
50 Hz
IPX4
13. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
and electronic appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
www.electrolux.com
22
ENGLISH23
www.electrolux.com/shop
132921320-A-222012
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.