Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future. The Electrolux ambition is to offer a
wide variety of quality products that make your life more comfortable. You find
some examples on the cover in this manual. Please take a few minutes to study
this manual so that you can take advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering Ease-ofMind. Good luck!
EN
Page 4
4 contents electrolux
Contents
Safety information..............................5
Product description ...........................7
Control panel.....................................8
Important information concerning your personal safety and information on how
to avoid damaging the appliance.
General information and tips
Environmental information
Page 5
safety information electrolux 5
Safety Information
In the interest of your safety and to
ensure the correct use, before
installing and first using the
appliance, read this user manual
carefully, including its hints and
warnings. To avoid unnecessary
mistakes and accidents, it is
important to ensure that all people
using the appliance are thoroughly
familiar with its operation and safety
features. Save these instructions
and make sure that they remain
with the appliance if it is moved or
sold, so that everyone using it
through its life will be properly
informed on appliance use and
safety.
General safety
● It is dangerous to alter the
specifications or attempt to modify
this product in any way.
● During high temperature wash
programmes the door glass may get
hot. Do not touch it!
● Make sure that small pets do not
climb into the drum. To avoid this,
please check into the drum before
using.
● Any objects such as coins, safety
pins, nails, screws, stones or any
other hard, sharp material can cause
extensive damage and must not be
placed into the machine.
● Only use the advised quantities of
fabric softener and detergent.
Damage to the fabric can ensue if
you over-fill. Refer to the
manufacturer’s recommendations of
quantities.
● Wash small items such as socks,
laces, washable belts etc in a
washing bag or pillow case as it is
possible for such items to slip down
between the tub and the inner drum.
● Do not use your washing machine to
wash articles with whalebones,
material without hems or torn
material.
● Always unplug the appliance and
turn off the water supply after use,
clean and maintenance.
● Under no circumstances should you
attempt to repair the machine
yourself. Repairs carried out by
inexperienced persons may cause
injury or serious malfunctioning.
Contact your local Service Centre.
Always insist on genuine spare parts.
Installation
● This appliance is heavy. Care should
be taken when moving it.
● When unpacking the appliance,
check that it is not damaged. If in
doubt, do not use it and contact the
Service Centre.
● All packing and transit bolts must be
removed before use. Serious
damage can occur to the product
and to property if this is not adhered
to. See relevant section in the user
manual.
● After having installed the appliance,
check that it is not standing on the
inlet and drain hose and the worktop
is not pressing the electrical supply
cable.
● If the machine is situated on a
carpeted floor, please adjust the feet
in order to allow air to circulate freely
● Always be sure, that there is no
water leakage from hoses and their
connections after the installation.
EN
Page 6
6 safety information electrolux
● If the appliance is installed in a
location subject to frost, please read
the “dangers of freezing”chapter.
● Any plumbing work required to install
this appliance should be carried out
by a qualified plumber or competent
person.
● Any electrical work required to install
this appliance should be carried out
by a qualified electrician or
competent person.
Use
● This appliance is designed for
domestic use. It must not be used
for purposes other than those for
which it was designed.
● Only wash fabrics which are
designed to be machine washed.
Follow the instructions on each
garment label.
● Do not overload the appliance. See
the relevant section in the user
manual.
● Before washing, ensure that all
pockets are empty and buttons and
zips are fastened. Avoid washing
frayed or torn articles and treat
stains such as paint, ink, rust, and
grass before washing. Underwired
bras must NOT be machine washed.
● Garments which have been in
contact with volatile petroleum
products should not be machine
washed. If volatile cleaning fluids are
used, care should be taken to
ensure that the fluid is removed from
the garment before placing in the
machine.
● Never pull the power supply cable to
remove the plug from the socket;
always take hold of the plug itself.
● Never use the washing machine if
the power supply cable, the control
panel, the working surface or the
base are damaged so that the inside
of the washing machine is
accessible.
Child safety
● This washing machine is not
intended for use by young children
or infirm persons without
supervision.
● Young children should be supervised
to ensure that they do not play with
the appliance.
● The packaging components (e.g.
plastic film, polystyrene) can be
dangerous to children - danger of
suffocation! Keep them out of
children’s reach
● Keep all detergents in a safe place
out of children’s reach.
● Make sure that children or pets do
not climb into the drum. To avoid this
the machine incorporates special
feature. To activate this device, rotate
the button (without pressing it) inside
the door clockwise until the groove
is horizontal. If necessary use a coin.
P1131
To disable this device and restore
the possibility of closing the door,
rotate the button anti-clockwise until
the groove is vertical.
Page 7
electrolux product description 7
Product description
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption.
The New Jet system allows total use of detergent and reduces water consumption
so saving energy.
1
Detergent dispenser drawer
2
Control panel
3
Door opening handle
4
Drain pump
5
Adjustable feet
12
Cottons
Spin
Normal
7
Kg
D
y
n
am
ic
Syste
m
Eco
Drain
Rinse
Synthetics
Soak
Delicates
Easy Iron
Jeans
Wool
Silk
Special
Handwash
Lingerie
r
e
g
a
n
a
M
e
im
T
Start/Pause
Delay
Extra rinse
Prewash
Spin
Temp.
EWF 14780 W
3
EN
Detergent dispenser drawer
Prewash
Wash
Fabric Softener
4
5
EN001
Page 8
8 electrolux control panel
Control panel
Rinse
Soak
Special
Jeans
Drain
Spin
Silk
Lingerie
Normal
Handwash
Eco
Wool
134587269
1
Programme selector dial
2
Temperature button
3
Spin reduction button
4
Prewash button
5
Extra rinse button
6
Delay button
7
Display
Cottons
Synthetics
Delicates
Easy Iron
Temp.
Spin
Prewash
Extra rinse
Time Manager
Delay
Start/Pause
EWF 14780 W
8
Start/Pause button
9
Time manger buttons
Page 9
Use
First Use
● Ensure that the electrical and water
connections comply with the
installation instructions.
● Remove the polystryrene block and
any material from the drum.
Daily Use
Acoustic signals
The machine is provided of an acoustic
device, which sounds in the following
cases:
● when selecting a wash programme
● when depressing the options buttons
● at the end of the cycle
● in the event of operating problems
By pressing the “Prewash” and “Extra
rinse” buttons simultaneously for about
6 seconds, the acoustic signal is
deactivated (except for the events of
operating problems).
By pressing these 2 buttons again, the
the acoustic signal is reactivated.
use electrolux 9
EN
P0004
Measure out the detergent and the
fabric softener
Pull out the dispenser drawer until it
stops. Measure out the amount of
detergent required, pour it into the main
wash compartment and, if you wish
to carry out the “prewash” phase, pour
it into the compartment marked .
C0064
If required, pour fabric softener into the
compartment marked (the amount
used must not exceed the “MAX” mark
in the drawer). Close the drawer gently.
Load the laundry
Open the door by carefully pulling the
door handle outwards. Place the laundry
in the drum, one item at a time, shaking
them out as much as possible. Close
the door.
C0065
Page 10
10 electrolux use
Select the required programme
Turn the programme selector dial to the
required programme. The buzzer sounds.
The washing machine will propose a
temperature and automatically select the
maximum spin value provided for the
programme you have chosen. You can
change these values by operating the
corresponding buttons. The Display
shows the following information about the
selected programme proposed:
1
temperature
2
spin speed
3
phase icons making up the
programme
4
soil degree
5
duration
The green Start/Pause light starts to flash.
1234
5
The selector dial is divided into following
sections:
Cottons
Eco
Synthetics
Delicates
Rinse
Soak
Drain
Spin
Normal
● Special programmes : Rinses,
Drain, Spin.
The selector dial can be turned either
clockwise or anticlockwise. Position O to
Reset programme/ Switching OFF of the
machine.
At the end of the programme the
selector dial must be turned to
position O, to switch the machine off.
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the red
Start/Pause pilot light will flash 3 times
and the message Err will apperar on
the display to indicate a wrong
selection. The machine will not perform
the new selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause button.
Select the temperature
Temp.
SpinPrewash Extra rinseDelay
Jeans
Silk
Special
● Cottons
● Synthetics , Synthetics ,
Lingerie
Handwash
Easy Iron
Wool
Delicates , Easy Iron , Wool
Handwash , Lingerie , Silk ,
Jeans and Soak .
Press this button repeatedly to increase or
decrease the temperature, if you want
your laundry to be washed at a
temperature different from the one
proposed by the washing machine.
Maximum temperatures are 90°C for
cottons, 60°C for synthetics and Easy
iron programme, 40°C for delicates,
wool, lingerie, jeans programme and
Page 11
use electrolux 11
fabrics to be handwashed, 30°C for
silk and soak, while corresponds to
cold wash.
During the washing cycle the
thermometer is animated.
Select the spin speed, No spin,
Rinse Hold or Night Cycle option
Tem p.
SpinPrewash Extra rinseDelay
Press the Spin button repeatedly to
change the spin speed, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine.
During the spinning phase the spiral is
animated.
Maximum speeds are:
● for Cotton: 1400 rpm or 1600 rpm
depending on the Model;
● for Jeans programme: 1200 rpm;
● Wool and Handwash: 1000 rpm
● for Synthetics, Easy iron and Lingerie:
900 rpm;
● for Delicates and Silk: 700 rpm.
No spinoption eliminates all the
spin phases and increases the number
of rinses for cottons, synthetics, delicates, silk and Jeans programme.
Rinse Hold : by selecting this
option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished the display shows a
0.00
flashing, the (Door) icon is still
visualized, the Start/Pause light is off and
the door is locked to indicate that the
water must be emptied out.
To empty out the water:
● turn the programme selector dial to
“O”
● select the (Drain), (Spin)
programme
● reduce the spin speed if needed, by
means of the relevant button
● depress Start/Pause button
● at the end of the programme, the
display shows a 0.00 flashing. The
(Door) icon desappears and the door
can be opened.
Night Cycle : by selecting this
option, the machine will not drain the
water of the last rinse, so as not to
wrinkle the laundry.
As all spinning phases are suppressed,
this washing cycle is very noiseless and
it can be selectionned at night or in
times with a more economical power
rate.
On cotton, synthetic (except for Easy
Iron), delicates, silk and Jeans
programmes the rinses will be
performed with more water.
When the programme has finished, the
display shows a
0.00 flashing, the
(Door) icon is still visualized, the
Start/Pause light is off and the door is
locked to indicate that the water must
be emptied out.
To empty out the water, please
read the previous option steps.
Select the Prewash option
Temp.
SpinPrewash Extra rinseDelay
EN
Page 12
12 electrolux use
Select this option if you wish your
laundry to be prewashed at 30°C
before the main wash (not available
for Wool, Handwash, Lingerie, Silk
and Soak programme). The prewash
ends with a short spin in programmes
for cotton and synthetic fabrics,
whereas in the programmes for delicate
fabrics the water is only drained.
The relevant pilot light will light up.
Select the Extra Rinse option
Tem p.
SpinPrewash Extra rinseDelay
This button can be selected with all
programmes except the
HHaannddwwaasshh, SSiillkk, JJeeaannss
WWooooll, LLiinnggeerriiee
programmes.
The machine performs some additional
rinses.
This option is recommended for people
who are allergic to detergents, and in
areas where the water is very soft.
Select the Delay start
Tem p.
SpinPrewash Extra rinseDelay
You must select this option after you
have set the programme and before you
press the Start/Pause button.
If you wish to add laundry in the
machine during the delay time you will
press Start/Pause button to put the
machine in pause. Add the laundry,
close the door and press Start/Pause
button again.
You can cancel the delay time at any
moment, before you press the
Start/Pause button.
The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of
20 hours by means of this button.
Selecting the delayed start.
• Select the programme and the
required options.
,
• Select the delay start.
• Depress “Start/Pause” button: the
machine starts its hourly countdown.
The programme will start after the
selected delay has expired.
Cancelling the delayed start
• Depress “Start/Pause” button.
• Depress “Start/Pause” button, the
symbol
0’ is displayed.
• Depress “Start/Pause” button again.
The Delay Start cannot be selected
with Drain programme.
Before you start the programme, if
you wish to delay the start, press the
Delay Start button repeatedly, to select
the desired delay. The corresponding
icon will appear on the display in the
upper part of the display.
The selected delay time value (up to 20
hours) will appear on the display for
about 3 seconds, then the duration of
the programme will appear again.
Display
The display shows the following
information:
Duration of the selected programme
After selecting a programme, the
duration is displayed in hours and
minutes (for example 2.05). The
segments inside the clock icon are
animated.
Page 13
The duration is calculated automatically
on the basis of the maximum
recommended load for each type of
fabric.
Temp.
use electrolux 13
SpinPrewash Extra rinseDelay
EN
Temp.
SpinPrewash Extra rinseDelay
After the programme has started, the
time remaining is updated every minute.
Washing programme phase icons
By selecting the wash programme, all
the washing programme phase icons
corresponding to the various phases
making up the programme are shown in
the upper part of the display.
Temp.
SpinPrewash Extra rinseDelay
After you have pressed the Start/Pause
button and the machine has started, the
Door icon is lighted-on and only the
phase running icon stays on. When the
programme has finished, a flashing zero
0.00) is displayed and the(Door)
(
icon desappears.
Delay
The selected delay (20 hours max) set
by means of the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed. The relevant
phase icon is lighted-on.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected,
the message Err is displayed for about
2 seconds and the integrated red
Start/Pause light start flashing.
Prewash Extra rinseDelay
Start/Pause
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example
E20 (see paragraph
“Something not working”).
Prewash Extra rinseDelay
Start/Pause
End of programme
When the programme has finished a
flashing zero is displayed, the(Door)
icon desappears and the door can be
opened.
PrewashExtra rinseDelayStart/Pause
Page 14
14 electrolux use
Heating phase
During the washing cycle the display
shows the temperature icon animated
to indicate that the appliance has
started the heating phase of the water
in the tub.
Tem p.
SpinPrewash Extra rinseDelay
Select the Start/Pause
Prewash Extra rinseDelay
Start/Pause
To start the selected programme, press
the “Start/Pause” button; the green
pilot light stops flashing.
The “door” (Door) icon appears on
the display to indicate that the appliance
starts operating and the door is locked.
To interrupt a programme which is
running, depress the “Start/Pause”
button: the green pilot light starts to
flash.
To restart the programme from the point
at which it was interrupted, press the
“Start/Pause” button again.
If you have chosen a delayed start, the
machine will begin the countdown.
If an incorrect option is selected, an
integrated red pilot light of the “Start/
Pause” button flashes for 3 times the
message Err is displayed for about 2
seconds. Three acoustic signals sound.
Select the “Time Manager” option
Time Manager
Temp.
SpinPrewash Extra rinse Delay
This function allows you to modify the
washing time, automatically proposed
by the washing machine.
By pressing the “Time Manager”
button repeatedly, the duration of the
washing cycle can be increased or
decreased.
A soil level icon will appear on the
display to indicate the choosen degree
of soil.
Soil
Level
IntensiveFor heavy soiled items
NormalFor normal soiled items
DailyFor daily soiled items
LightFor slightly soiled items
QuickFor very slightly soiled items
Super
Quick (*)
(*) Max. load for cotton: 3,5 kg.
IconType of fabric
For items used or worn for a
short time
Max. load for synthetic and
delicate: 2.5 kg.
Attention!
The “Time Manager” option cannot
be selected with the Eco(Cottons)
programme.
The availability of these soil level icons
change according to the type of fabric
as shown in the following chart:
Page 15
use electrolux 15
FabricSoil Level
Cottons
90°C
60°C
50°C
40°C
30°C
Synthetics
60°C
50°C
40°C
30°C
Delicates
40°C
30°C
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
(cold)
XXXXXX
XXXX
XXXX
XXXX
XXXX
(cold)
(cold)
XXXX
XXXX
XXXX
XXXX
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you must
pause the washing machine by pressing
the “Start/Pause” button. (Only the
Time Manager option cannot be
modified after the programme has
started. )
Changing a running programme is
possible only by resetting it. Turn the
programme selector dial to “O” and
then to the new programme position.
The washing water in the tub will not
emptied out. Start the new programme
by depressing the “Start/Pause” button
again.
Interrupting a programme
Depress the “Start/Pause” button to
interrupt a programme which is running,
the corresponding light starts to flash.
Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to “O” to cancel
a programme which is running. Now
you can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by pressing
the “Start/Pause” button.
If the “door” icon desappears on the
display, the door can be opened.
If the “door” light does not goes off,
this means that the machine is already
heating, that the water level is above the
bottom edge of the door or that the drum
is turning.
In this case the door can not be opened.
If you cannot open the door but you need
to open it you have to switch the machine
off by turning the selector dial to “O”. After
about 3 minutes the door can be opened
(pay attention to the water level and
temperature!).
At the end of the programme
The machine stops automatically. Some
acoustic signals sound for 2 minutes.
If the Rinse Hold” or Night Cycle
options have been selected, the
“Start/Pause” light goes off, a flashing
0.00” will appear on the display, the
“
(Door) icon is still visualized and the door
remains locked to indicate that the water
must be emptied out before opening the
door.
To empty out the water please read
the steps on the Rinse Hold option
paragraph.
At the end of the cycle, turn the
programme selector dial to “O” to switch
the machine off. Remove the laundry from
the drum and carefully check that the drum
is empty. If you do not intend to carry out
another wash, close the water tap. Leave
the door open to prevent the formation of
mildew and unpleasant smells.
EN
Page 16
columns and margins electrolux 1616 electrolux washing hints
Washing hints
Sorting the laundry
Follow the wash code symbols on each
garment label and the manufacturer’s
washing instructions. Sort the laundry as
follows: whites, coloureds, synthetics,
delicates, woollens.
Temperatures
for normally soiled white
90°
50°/60°
30°-40°
(cold)
Before loading the laundry
Never wash whites and coloureds
together. Whites may lose their
“whiteness” in the wash.
New coloured items may run in the first
wash; they should therefore be washed
separately the first time.
Make sure that no metal objects
are left in the laundry (e.g. hair
clips, safety pins, pins).
Button up pillowcases, close zip
fasteners, hooks and poppers. Tie any
belts or long tapes.
Remove persistent stains before
washing.
cottons and linen (e.g. tea
cloths, towels, tablecloths,
sheets...)
for normally soiled, colour
fast garments (e.g. shirts,
night dresses, pyjamas....) in
linen, cotton or synthetic
fibres and for lightly soiled
white cotton (e.g.
underwear).
for delicate items (e.g. net
curtains), mixed laundry
including synthetic fibres and
woollens bearing the label
«pure new wool, machine
washable, non-shrink».
Rub particularly soiled areas with a
special detergent or detergent paste.
Treat curtains with special care. Remove
hooks or tie them up in a bag or net.
Maximum loads
Recommended loads are indicated in
the programme charts.
General rules:
Cotton, linen: drum full but not too
tightly packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum
no more than one third full.
Washing a maximum load makes the
most efficient use of water and energy.
For heavily soiled laundry, reduce the
Stubborn stains may not be removed by
just water and detergent. It is therefore
advisable to treat them prior to washing.
Blood: treat fresh stains with cold water.
For dried stains, soak overnight in water
with a special detergent then rub in the
soap and water.
Page 17
washing hints electrolux 17
Oil based paint: moisten with benzine
stain remover, lay the garment on a soft
cloth and dab the stain; treat several
times.
Dried grease stains: moisten with
turpentine, lay the garment on a soft
surface and dab the stain with the
fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water
or a rust removing product used cold.
Be careful with rust stains which are not
recent since the cellulose structure will
already have been damaged and the
fabric tends to hole.
Mould stains: treat with bleach, rinse
well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone (*), lay the garment on a soft
cloth and dab the stain.
Lipstick: moisten with acetone as
above, then treat stains with methylated
spirits. Remove any residual marks from
white fabrics with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with
bleach.
Ink: depending on the type of ink,
moisten the fabric first with acetone (*),
then with acetic acid; treat any residual
marks on white fabrics with bleach and
then rinse thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub
with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on
the choice of detergent and use of the
correct quantities to avoid waste and
protect the environment. Although
biodegradable, detergents contain
substances which, in large quantities,
can upset the delicate balance of nature.
The choice of detergent will depend on
the type of fabric (delicates, woollens,
cottons, etc.), the colour, washing
temperature and degree of soiling.
All commonly available washing machine
detergents may be used in this
appliance:
• powder detergents for all types of
fabric,
• powder detergents for delicate fabrics
(60°C max) and woollens,
• liquid detergents, preferably for low
temperature wash programmes (60°C
max) for all types of fabric, or special
for woollens only.
The detergent and any additives must
be placed in the appropriate
compartments of the dispenser drawer
before starting the wash programme.
If using concentrated powder or liquid
detergents, a programme without
prewash must be selected.
The washing machine incorporates a
recirculation system which allows an
optimal use of the concentrated
detergent.
Pour liquid detergent into the dispenser
drawer compartment marked justbefore starting the programme.
Any fabric softener or starching additives
must be poured into the compartment
marked before starting the wash
programme.
EN
Page 18
18 electrolux washing hints
Follow the product manufacturer’s
recommendations on quantities to use
and do not exceed the «MAX» mark
in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will
depend on the type of fabric, load size,
degree of soiling and hardness of the
water used.
Water hardness is classified in so-called
“degrees” of hardness. Information on
hardness of the water in your area can
be obtained from the relevant water
supply company, or from your local
authority.
Follow the product manufacturers’
instructions on quantities to use.
Use less detergent if:
• you are washing a small load,
• the laundry is lightly soiled,
• large amounts of foam form during
washing.
Degrees of water hardness
Level
Characteristic
German
10-70-15soft
28-1416-25medium
315-2126-37hard
4> 21 > 37very hard
Degrees
°dH
French
°T.H.
Page 19
International wash code symbol electrolux 19
95
60
60
40
40
40
30
30
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Specially tested
programme for wool
garments bearing the
“Pure new wool, nonshrink, machine
washable” label.
Special programme
for hand washing
fabrics.
.
Spin Reduction /
No spin //
Prewash
Extra rinse
Spin Reduction /
No spin //
Prewash
Extra rinse
Spin Reduction /
No spin //
Prewash
Extra rinse
Spin Reduction /
No spin //
Extra rinse
Spin Reduction /
No spin //
Prewash
Extra rinse
Spin Reduction /
No spin //
Spin Reduction /
No spin //
Description of
programme
Main wash from 90°C
to (cold)
3 rinses
Long spin
Main wash from 90°C
to 40°C
3 rinses
Long spin
Main wash from 60°C
to (cold)
3 rinses
Short spin
Main wash from 40°
to (cold)
3 rinses
Short spin
Main wash from 60°C
to (cold)
3 rinses
Short spin
Main wash from 40°
to (cold)
3 rinses
Short spin
Main wash from 40°
to (cold)
3 rinses
Short spin
Lingerie
40°
Max. load 1 kg
Special programme
for extremely delicate
hand washable items
Spin Reduction /
No spin //
Main wash at 40°C
3 rinses
Short spin
Page 21
Washing programmes
washing programmes electrolux 21
Programme/
Temperature
Silk
30°
Max. load 1 kg
Jeans
40°
Max. load 3 kg
Soak
30°C
Rinse
Drain
Type of laundryOptions
Silk items to be
gentle washed and
spun.
Special programme
for Jeans items,
pants, shirts, jackets
Heavy soiled laundry
(not for wool and
handwash)
Separate rinse cycle
for cotton hand
washed items.
For emptying out the
last rinse water in
programmes with
the Rinse Hold
or Night Cycle
option.
Spin Reduction /
No spin //
Spin Reduction /
No spin //
Easy Iron
Spin Reduction /
No spin //
Extra rinse
Description of
programme
Main wash at 30°C
2 rinses
Short spin
Main wash at 40°C
5 rinses
Long spin at 1200
rpm
Soak for about 20
minutes at 30°C
Stop with water in
the tub
3 rinses
Long spin
Draining of water
EN
Spin
O
Max. Cottons load .......................... 7 kg
Synthetics/Delicates/
Jeans programme load ....................3 kg
Separate spin for
cottons.
For cancelling the
wash programme
which is running and
for switching the
machine off.
Spin ReductionDrain and long spin
Wool and Handwash load................2 kg
Easy Iron/Lingerie/Silk ......................1 kg
Page 22
22 electrolux programme information
Programme information
This programme can be selected for slightly or normally
Eco
Easy Iron
Wool and
Handwash
soiled cotton items. The temperature will decrease and the
washing time will be extended. This allows to obtain a
good washing efficiency by saving energy.
Selecting this programme the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform some additional rinses.
Washing programme for machine washable wool as
well as for hand washable woollens and delicate fabrics
with the “hand washing” care symbol .
The wool wash cycle of this machine has been approved by
Woolmark for the washing of machine washable Woolmark
products provided that the garments are washed according
to the instructions on the garment label and those issued
by the manufacturer of this washing machine. M9604.
Lingerie
Silk
Jeans
This programme is suitable for washing extremely delicate
items such underwears, lace brassieres, etc. Washing
temperature is 40°C. The maximum spin speed is
automatically reduced to 700 rpm.
Delicate washing programme suitable for silk and mixed
synthetics items. Washing temperature is 30°C.
The maximum spin speed is automatically reduced to 700
rpm.
With this programme it is possible to wash free time items
like pants, shirts or jackets in Jeans and also jersey realized
with hi-tech materials. The washing temperature is 40°C.
The maximum spin speed is 1200 rpm.
Page 23
Programme information
programme information electrolux 23
Soak
Rinse
This is a special programme for heavily soiled laundry. The
machine performs a soak of about 20 minutes at 30°C.
At the end of the soak time the machine will stop automatically with water left in the tub. Pour the detergent for the
soak programme into the compartment marked
This programme cannot be used for very delicate fabrics
as silk or wool. Before starting a new washing phase, it is
necessary to empty out the water by:
• Draining only: turn the programme selector dial to Drain
programme . (Depress the Start/Pause button).
• Draining and spin: turn the programme selector dial to
programme Spin , reduce the spin speed by turning
the Spin speed selector dial button, and then depress
Start/Pause button.
Important!
At the end of the soak (after having emptied out the water)
you can select the washing programme. First turn the programme selector dial to “O”, then select the programme
and depress the Start/Pause button.
With this programme it is possible to rinse and spin cotton
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final spin at
maximum speed. The spin speed can be reduced by
depressing Spin button.
.
EN
Drain
Spin
O = Cancelling/OFF
For emptying out the water of the last rinse in programmes
with the Rinse Hold and Night Cycle option.
Turn first the programme selector dial to O, then select
Drain programme and depress the Start/Pause button.
Separate spin for hand washed garments and after
programmes with Rinse Hold and Night Cycle
option. Before selecting this programme the selector dial
must be turned to O. You can choose the speed by means
of the relevant button to adapt it to the fabrics to be spun.
To reset a programme and to switch off the machine turn
the selector dial to O. Now can a new programme be
selected.
Page 24
24 electrolux care and cleaning
C0067
C0066
Care and cleaning
You must DISCONNECT the appliance
from the electricity supply, before you
can carry out any cleaning or
maintenance work.
Descaling
The water we use normally contains
lime. It is a good idea to periodically use
a water softening powder in the
machine. Do this separately from any
laundry washing, and according to the
softening powder manufacturer's
instructions. This will help to prevent the
formation of lime deposits.
After each wash
Leave the door open for a while. This
helps to prevent mould and stagnant
smells forming inside the appliance.
Keeping the door open after a wash will
also help to preserve the door seal.
Maintenance Wash
With the use of low temperature washes
it is possible to get a build up of residues
inside the drum.
We recommend that a maintenance
wash be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash
programme.
• Use a normal measure of detergent,
must be a powder with biological
properties.
External cleaning
Clean the exterior cabinet of the
appliance with soap and water only, and
then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive
dispenser drawer should be cleaned
regularly.
Remove the drawer by pressing the
catch downwards and by pulling it out.
Flush it out under a tap, to remove any
traces of accumulated powder.
To aid cleaning, the top part of the
additive compartment should be
removed.
Cleaning the drawer recess
Having removed the drawer, use a small
brush to clean the recess, ensuring that
all washing powder residue is removed
from the upper and lower part of the
recess.
Replace the drawer and run the rinse
programme without any clothes in the
drum.
Page 25
care and cleaning electrolux 25
EN
P0038
Cleaning the pump
The pump should be inspected if
• the machine does not empty and/or
spin
• the machine makes an unusual noise
during draining due to objects such as
safety pins, coins etc. blocking the
pump.
Proceed as follows:
• Disconnect the appliance.
• If necessary wait until the water has
cooled down.
• Open the pump door.
P1114
• Place a containfer close to the pump
to collect any spillage.
• Pull out the emergency emptying
hose, place it in the container and
remove its cap.
• When no more water comes out,
unscrew the pump cover and remove
it. Always keep a rag nearby to dry up
spillage of water when removing the
cover.
P1115
• Remove any objects from the pump
impeller by rotating it.
• Put the cap back on the emergency
emptying hose and place the latter
back in its seat.
P1117
• Screw the pump cover fully in.
• Close the pump door.
Warning!
When the appliance is in use and
depending on the programme selected
there can be hot water in the pump.
Page 26
26 electrolux care and cleaning
P1090
Never remove the pump cover during a
wash cycle, always wait until the
appliance has finished the cycle, and is
empty. When replacing the cover, ensure
it is securely retightened so as to stop
leaks and young children being able to
remove it.
Cleaning the water inlet filter
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged.
It is therefore a good idea to clean it
from time to time.
Turn off the water tap. Unscrew the
water inlet hose. Clean the filter using a
hard bristle brush. Tighten up the inlet
hose.
• When you intend to start the machine
up again, make sure that the room
temperature is above 0°C.
Emergency emptying out
If the water is not discharged, proceed
as follows to empty out the machine:
• pull out the plug from the power
socket;
• close the water tap;
• if necessary, wait until the water has
cooled down;
• open the pump door;
• place a bowl on the floor and place
the end of the emergency emptying
hose into the bowl. Remove its cap.
The water should drain by gravity into
the bowl. When the bowl is full, put
the cap back on the hose. Empty the
bowl. Repeat the procedure until water
stops flowing out;
• clean the pump if necessary as
previously described;
• replace the emergency emptying hose
in its seat after having plugged it;
• screw the pump cover again and
close the door.
The dangers of freezing
If the machine is exposed to
temperatures below 0°C, certain
precautions should be taken.
• Turn off the water tap.
• Unscrew the inlet hose.
• Place the end of the emergency
emptying hose and that of the inlet
hose in a bowl placed on the floor and
let water drain out.
• Screw the water inlet hose back on
and reposition the emergency
emptying hose after having put the
cap on again.
Page 27
something not working electrolux 27
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the red Start/Pause pilot light flashes,
one of the following alarm codes appears on the display and at the same some
acoustic signals sound every 20 seconds to indicate that the machine is not working:
● E10: problem with the water supply
● E20: problem with water draining
● E40: door open.
Once the problem has been eliminated, press the Start/Pause button to restart the
programme. If after all checks, the problem persists, contact your local Service
Centre.
MalfunctionPossible causeSolution
The washing machine does
not start:
● The door has not been
closed.
E40.
● Close firmly the door.
EN
● The plug is not properly
inserted in the power
socket.
● There is no power at the
socket.
● The main fuse has blown.
● The selector dial is not
correctly positioned and the
Start/Pause button has not
been depressed.
● The delay start has been
selected.
The machine does not fill:● The water tap is closed.
E10
● The inlet hose is squashed
or kinked.
● The filter in the inlet hose is
blocked.
● The door is not properly
closed.
E10
E10
E40
● Insert the plug into the
power socket.
● Please check your domestic
electrical installation.
● Replace the fuse.
● Please turn the selector dial
and press the Start/Pause
button again.
● If the laundry are to be
washed immediately, cancel
the delay start.
● Open the water tap.
● Check the inlet hose
connection.
● Clean the water inlet hose
filter.
● Close firmly the door.
Page 28
28 electrolux something not working
MalfunctionPossible causeSolution
The machine fills then
empties immediately:
The machine does not
empty and/or does not spin:
● The end of the drain hose is
too low.
● The drain hose is squashed
or kinked.
● The drain pump is clogged.
E20
E20
● The the option or
has been selected.
● The laundry is not evenly
distributed in the drum.
There is water on the floor:● Too much detergent or
Unsatisfactory washing
results:
unsuitable detergent
(creates too much foam)
has been used.
● Check whether there are
any leaks from one of the
inlet hose fittings. It is not
always easy to see this as
the water runs down the
hose; check to see if it is
damp.
● The drain hose is damaged.
● The cap on the emergency
emptying hose has not
been replaced after
cleaning the pump.
● Too little detergent or
unsuitable detergent has
been used.
● Stubborn stains have not
been treated prior to
washing.
● The correct temperature
was not selected.
● Excessive laundry load.
● Refer to relevant paragraph
in “water drainage” section.
● Check the drain hose
connection.
● Clean the drain pump.
● Disable the option or
● Redistribute the laundry.
● Reduce the detergent
quantity or use another one.
● Check the water inlet hose
connection.
● Change it with a new one.
● Put the cap back on the
emergency emptying and
place the latter back in its
seat.
● Increase the detergent
quantity or use another one.
● Use commercial products to
treat the stubborn stains.
● Check if you have selected
the correct temperature.
● Introduce into the drum less
laundry.
Page 29
something not working electrolux 29
MalfunctionPossible causeSolution
The door will not open:● The programme is still
running.
● The door lock has not been
released.
● There is water in the drum.
The machine vibrates or is
noisy:
● The transit bolts and
packing have not been
removed.
● The support feet have not
been adjusted.
● The laundry is not evenly
distributed in the drum.
● Maybe there is very little
laundry in the drum.
Spinning starts late or the
machine does not spin:
● The electronic unbalance
detection device has cut in
because the laundry is not
evenly distributed in the
drum. The laundry is
redistributed by reverse
rotation of the drum. This
may happen several times
before the unbalance
disappears and normal
spinning can resume. If,
after 10 minutes, the
laundry is still not evenly
distributed in the drum, the
machine will not spin. In this
case, redistribute the load
manually and select the
spin programme.
● Wait the end of washing
cycle.
● Wait for the Door icon
desappearing.
● Select drain or spin
programme to empty out
the water.
● Check the correct
installation of the appliance.
● Check the correct levelling
of the appliance.
● Redistribute the laundry.
● Load more laundry.
● Redistribute the laundry.
EN
Page 30
30 electrolux something not working
Mod. ..........
Prod. No. ...........
Ser. No. .........
M
o
d
.
.
.
.
.
.
.
.
.
.
.
P
r
o
d
.
N
o
.
.
.
.
.
.
.
.
.
.
.
.
S
e
r
.
N
o
.
.
.
.
.
.
.
.
.
.
P0042 BD
MalfunctionPossible causeSolution
The machine makes an
unusual noise
● The machine is fitted with a
type of motor which makes
an unusual noise compared
with other traditional
motors. This new motor
ensures a softer start and
more even distribution of
the laundry in the drum
when spinning, as well as
increased stability of the
machine.
No water is visible in the
drum
● Machines based on modern
technology operate very
economically using very little
water without affecting
performance.
If you are unable to identify or solve the
problem, contact our service centre.
Before telephoning, make a note of the
model, serial number and purchase date
of your machine: the Service Centre will
require this information.
Page 31
technical data electrolux 31
Technical data
DimensionsWidth60 cm
Height
Depth
85 cm
63 cm
EN
Electrical connection Voltage
- Overall power - Fuse
Water supply pressureMinimum0,05 MPa
Maximum Load7 kg
Spin Speed1400 rpm EWF 14780
Information on the electrical connection is given on
the rating plate on the inner edge of the appliance
door
Maximum
Cotton
Synthetics and Jeans
Delicates
Woollens and handwash
Easy Iron/Lingerie/Silk
Maximum
1600 rpm EWF 16780
0,8 MPa
3 kg
3 kg
2 kg
1kg
Page 32
32 electrolux consumption value
Consumption values
Programme Energy
Water
consumption
(in litres)
Cottons Normal 90°2.162
Cottons Eco 60° (*)
Synthetics 60°
Delicates 40°0.5060
Easy iron 60°0.4563
Wool 40°0.4058
Handwash 40°0.4058
Lingerie 40°0.3555
Silk 30°0.2550
Jeans 40°0.5055
Soak 30°0.4023
Rinses0.145
Drain2.346
Spin2.346
consumption
(in kWh)
1.1957
0.8552
Programme
duration
(in minutes)
the display on the control panel.
For the duration of the programmes, please refer to
The consumption data shown on this
chart is to be considered purely
indicative, as it may vary depending on
the quantity and type of laundry, on the
inlet water temperature and on the
ambient temperature. It refers to the
highest temperature for each wash
programme.
(*) The programme “Cottons Eco”
with a load of 7 kg at 60°C is the
reference programme for the data
entered in the energy label, in
compliance with EEC 92/75
standards.
Page 33
Installation
HEC0001
HEC0008
C
C
HEC0014
HEC0011S
D
HEC0003S
C
C
B
B
HEC0002S
A
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it’s back to
remove the polystyrene base from the
bottom.
installation electrolux 33
EN
4. Unscrew and remove the two large
rear bolts B and the six smaller bolts
C.
5. Remove the bracket D and tighten up
the six smaller bolts C.
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
3. With a suitable spanner unscrew and
remove the central rear bolt A. Slide
out the relevant plastic spacer.
Page 34
34 electrolux installation
HEC0005
HEC0010
HEC0006
HEC007S
6. Open the porthole, take out the inlet
hose from the drum and remove the
polystyrene block fitted with the
adhesive tape on the door seal.
7. Fill the smaller upper hole and the two
large ones with the corresponding
plastic plug caps supplied in the bag
containing the instruction booklet.
Accurate levelling prevents vibration,
noise and displacement of the machine
during operation.Never place cardboard,
wood or similar materials under the
machine to compensate for any
unevenness in the floor.
Water inlet
An inlet hose is supplied and can been
found inside the machine drum. Do not
use the hose from your previous
machine to connect to the water supply.
1. Open the porthole and extract the
inlet hose.
2. Connect the hose with the angled
connection to the machine.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the
machine is not impeded by carpets,
rugs etc. Check that the machine does
not touch the wall or other kitchen units.
Level the washing machine by raising or
lowering the feet. The feet may be tight
to adjust as they incorporate a self
locking nut, but the machine MUST be
level and stable.
If necessary, check the setting with a
spirit level.
Any necessary adjustment can be made
with a spanner.
Do not place the inlet hose
downwards. Angle the hose to the
left or right depending on the
position of your water tap.
Page 35
A
P0352
P0351
P1118
P0022
installation electrolux 35
3. Set the hose correctly by loosening
the ring nut.
After positioning the inlet hose, be
sure to tighten the ring nut again to
prevent leaks.
4. Connect the hose to a tap with a 3/4”
thread. Always use the hose supplied
with the appliance.
The inlet hose must not be lengthened. If
it is too short and you do not wish to
move the tap, you will have to purchase
a new, longer hose specially designed
for this type of use.
The inlet hose is provided with a water
stop device, which protects against
damage caused by water leaks in the
hose which could develop due to natural
ageing of the hose. This fault is shown
by a red sector in the window “A”.
Should this occur, turn the water tap off
and refer to your Service Centre to
replace the hose.
Water drainage
The end of the drain hose can be
positioned in three ways:
Hooked over the edge of a sink
using the plastic hose guide
supplied with the machine. In this
case, make sure the end cannot come
unhooked when the machine is
emptying. This could be done by tying it
to the tap with a piece of string or
attaching it to the wall.
In a sink drain pipe branch. This
branch must be above the trap so that
the bend is at least 60 cm above the
ground.
Directly into a drain pipe at a
height of not less than 60 cm and not
more than 90 cm. The end of the drain
hose must always be ventilated, i.e.
the inside diameter of the drain pipe
must be larger than the outside diameter
of the drain hose.
The drain hose must not be kinked.
EN
The drain hose may be extended to a
maximum of 4 metres. An additional
drain hose and joining piece is available
from your local Service Centre.
Page 36
36 electrolux
Electrical connection
This machine is designed to operate on
a 220-230 V, single-phase, 50 Hz
supply.
Check that your domestic electrical
installation can take the maximum load
required (2.2 kW), also taking into
account any other appliances in use.
Connect the machine to an earthed
socket.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the above
safety precaution. Should the appliance
power supply cable need to be
replaced, this should be carried out by
our Service Centre.
Please ensure that when the appliance is
installed the power supply cable is easily
accessible.
Page 37
environment concerns electrolux 37
Environment concerns
Packaging materials
The materials marked with the symbol
are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by
disposing of them properly in
appropriate collection containers.
Old machine
Use authorised disposal sites for your
old appliance. Help to keep your country
tidy!
The symbol on the product or on its
packaging indicates that this product
may not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
Ecological hints
To save water, energy and to help
protect the environment, we recommend
that you follow these tips:
• Normally soiled laundry may be
washed without prewashing in order to
save detergent, water and time (the
environment is protected too!).
• The machine works more
economically if it is fully loaded.
• With adequate pre-treatment, stains
and limited soiling can be removed;
the laundry can then be washed at a
lower temperature.
• Measure out detergent according to
the water hardness, the degree of
soiling and the quantity of laundry
being washed.
EN
Page 38
38 electrolux guarantee conditions
European guarantee
This appliance is guaranteed by
Electrolux, in each of the countries listed
in the following page, for the period
specified in the appliance guarantee or
otherwise by law. If you move from one
of these countries to another of these
countries the appliance guarantee will
move with you subject to the following
qualifications:
● The appliance guarantee starts from
the date you first purchased the
appliance which will be evidenced
by production of a valid purchase
document issued by seller of the
appliance.
● The appliance guarantee is for the
same period and to the same
extent for labour and parts as exists
in your country of residence for this
particular model or range of
appliances.
● The appliance guarantee is personal
to the original purchaser of the
appliance and cannot be transferred
to another user.
● The appliance is installed and used
in accordance with instructions
issued by Electrolux and is only
used within the home, i.e. is not
used for commercial purposes.
● The appliance is installed in
accordance with all relevant
regulations in force within your new
country of residence.
The provisions of this European
Guarantee do not affect any of the rights
granted to you by law.
Page 39
customer service centres electrolux 39
Customer Service Centres
Should you need further assistance please contact your local Customer Service
Centre
www.electrolux.com
EN
à
Albania
Belgique/België/Belgien
Česká republika
Danmark
Deutschland
Eesti
España
France
Great Britain
Hellas
Hrvatska
Ireland
Italia
Latvija
Lituania
Luxembourg
Magyarország
Nederland
Norge
Österreich
Polska
Portugal
Romania
Schweiz-Suisse-Svizzera
Slovenija
Slovensko
Suomi
Sverige
Türkiye
Rr. Pjeter Bogdani Nr. 7 Tirane
Bergensesteenweg 719, 1502 Lembeek
Budějovická 3, Praha 4, 140 21
Sjællandsgade 2, 7000 Fredericia
Muggenhofer Str. 135, 90429 Nürnberg
Mustamäe tee 24, 10621 Tallinn
Carretera M-300, Km. 29,900 Alcalá de Henares Madrid
Addington Way, Luton, Bedfordshire LU4 9QQ
4, Limnou Str., 54627 Thessaloniki
Slavonska avenija 3, 10000 Zagreb
Longmile Road Dublin 12
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Kr. Barona iela 130/2, LV-1012, Riga
Verkiu, 2 9, 09108 Vilnius, Lithuania
Rue de Bitbourg, 7, L-1273 Hamm
H-1142 Budapest XIV, Erzsébet királyné útja 87
Vennootsweg 1, 2404 CG - Alphen aan den Rijn
Risløkkvn. 2 , 0508 Oslo
Herziggasse 9, 1230 Wien
ul. Kolejowa 5/7, Warsaw
Quinta da Fonte - Edificio Gonçalves Zarco - Q35 -2774-518 Paço de Arcos
Str. Garii Progresului 2, S4, 040671 RO
Industriestrasse 10, CH-5506 Mägenwil
Tr aška 132, 1000 Ljubljana
Electrolux Slovakia s.r.o., Electrolux Domáce spotrebiče SK, Seberíniho 1, 821 03 Bratislava
Electrolux Service, S:t Göransgatan 143, S-105 45 Stockholm
Tarlabași caddesi no : 35 Taksim Istanbul
129090 Москва, Олимпийский проспект, 16, БЦ “Олимпик”
Page 40
Page 41
Page 42
www.electrolux.be
Numéro ANC : 132 979 720-00-312006
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.