AEG-Electrolux EWF146410W User Manual
user manual
benutzerinformation
Washing Machine
Waschmaschine
EWF 146410 W
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2
Product description 4
Control panel 5
Personalisation 7
First use 7
Daily use 7
Helpful hints and tips 11
Washing programmes 12
SAFETY INFORMATION
Important! Read carefully & keep for future
reference.
• The safety of Your appliance complies
with the industry standards and with legal
requirements on the safety of appliances.
However, as manufacturers, we feel it is
our duty to provide the following safety
notes.
• It is most important that this instruction
book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another
owner, or should you move house and
leave the appliance, always ensure that
the book is supplied with the appliance in
order that the new owner can get to
know the functioning of the appliance
and the relevant warnings.
• You MUST read them carefully before installing or using the appliance.
• Before first starting up, check the appliance for any damage incurred during
transport. Never connect up a damaged
appliance . If parts are damaged, contact
your supplier.
• If the appliance is delivered in the winter
months when there are minus temperatures. Store it at room temperature for 24
hours before using for the first time.
General safety
• It is dangerous to alter the specifications
or attempt to modify this product in any
way.
Care and cleaning 14
What to do if… 19
Technical data 21
Consumption values 21
Installation 22
Electrical connection 25
Environment concerns 26
Subject to change without notice
• During high temperature wash programmes the door glass may get hot. Do
not touch it!
• Make sure that small pets and children
do not climb into the drum. To avoid this,
please check into the drum before using.
• Any objects such as coins, safety pins,
nails, screws, stones or any other hard,
sharp material can cause extensive damage and must not be placed into the machine.
• Only use the advised quantities of fabric
softener and detergent. Damage to the
fabric can ensue if you over-fill. Refer to
the manufacturer’s recommendations of
quantities.
• Wash small items such as socks, laces,
washable belts etc in a washing bag or pillow case as it is possible for such items
to slip down between the tub and the inner drum.
• Do not use your washing machine to
wash articles with whalebones, material
without hems or torn material.
• Always unplug the appliance and turn off
the water supply after use, cleaning and
maintenance.
• Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced people
may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
• This appliance is heavy. Care should be
taken when moving it.
electrolux 3
• When unpacking the appliance, check
that it is not damaged. If in doubt, do not
use it and contact the Service Centre.
• All packing and transit bolts must be removed before use. Serious damage can
occur to the product and to property if
this is not adhered to. See relevant section in the user manual.
• After having installed the appliance,
check that it is not standing on the inlet
and drain hose and the worktop is not
pressing the electrical supply cable
against the wall.
• If the machine is situated on a carpeted
floor, please adjust the feet in order to allow air to circulate freely under the appliance.
• Always be sure, that there is no water leakage from hoses and their connections after the installation.
• If the appliance is installed in a location
subject to frost, please read the “dangers
of freezing” chapter.
• Any plumbing work required to install this
appliance should be carried out by a qualified plumber or competent person.
• Any electrical work required to install this
appliance should be carried out by a qualified electrician or competent person.
Use
• This appliance is designed for domestic
use. It must not be used for purposes other than those for which it was designed.
• Only wash fabrics which are designed to
be machine washed. Follow the instructions on each garment label.
• Do not overload the appliance. See the
Washing Programme Table.
• Before washing, ensure that all pockets
are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink,
rust, and grass before washing. Underwired bras must NOT be machine washed.
• Garments which have been in contact
with volatile petroleum products should
not be machine washed. If volatile cleaning fluids are used, care should be taken
to ensure that the fluid is removed from
the garment before placing in the machine.
• Never pull the power supply cable to remove the plug from the socket; always
take hold of the plug itself.
• Never use the appliance if the power supply cable, the control panel, the working
surface or the base are damaged so that
the inside of the washing machine is accessible.
Child safety
• This appliance is not intended for use by
person (including children) with reduced
physical sensory or mental capabilities or
lack of experience and knowledge unless
they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• The packaging components (e.g. plastic
film, polystyrene) can be dangerous to children - danger of suffocation! Keep them
out of children’s reach.
• Keep all detergents in a safe place out of
children’s reach.
• Make sure that children or pets do not
climb into the drum. To prevent children
and pets becoming trapped inside the
drum the machine incorporates a special
feature. To activate this device, rotate the
button (without pressing it) inside the
door clockwise until the groove is horizontal. If necessary use a coin.
To disable this device and restore the possibility of closing the door, rotate the button counterclockwise until the groove is
vertical.
4 electrolux
PRODUCT DESCRIPTION
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption. Its new washing system allows total use of detergent and reduces water consumption so saving energy.
1 2
3
4
5
6
1 Detergent dispenser drawer
2 Control panel
3 Door opening handle
Detergent dispenser drawer
Compartment for detergent used for prewash and soak phase or for stain remover
used during the stain action phase (if available). The prewash and soak detergent is
added at the beginning of the wash programme. The stain remover is added during the stain action phase.
Compartment for powder or liquid detergent used for main wash. If using liquid detergent pour it just before starting the programme.
Compartment for liquid additives (fabric
softener, starch).
Follow the product manufacturer’s recommendations on quantities to use and do not
exceed the «MAX» mark in the detergent
dispenser drawer. Any fabric softener or
starching additives must be poured into the
compartment before starting the wash programme.
4 Rating Plate
5 Drain pump
6 Adjustable feet
electrolux 5
CONTROL PANEL
Below is a picture of the control panel. It shows the programme selector dial as well as
the buttons, pilot light and the display. These are presented by relevant numbers on
the following pages.
1 2 4 6 7
1 Programme selector dial
2
TEMPERATURE button ( Temp. )
3 SPIN reduction button ( Centrif. - Es-
sorage )
4 PREWASH button ( Voorwas - Prélav-
age )
5 EXTRA RINSE button ( Extra spoelen
- Rinçage plus )
TABLE OF SYMBOLS
Symbols on the control panel
Cold Wash
Rinse Hold
Programme Selector Dial
It allows you to switch the appliance on/off
and/or to select a programme.
Temperature
This button allows you to increase or decrease the washing temperature.
Spin
By pressing this button you can change the
spin speed of the selected programme or
to select Rinse Hold option.
3 5
6 DELAY START button ( Startuitstel -
Depart différé )
7 Display
8 START/PAUSE button ( Start/Pauze -
Départ/Pause )
9 DOOR LOCKED pilot light
10 TIME MANAGER buttons
Rinse hold
By selecting this function the water of the
last rinse is not emptied out to prevent the
fabrics from creasing. Before opening the
door it will be necessary to empty out the
water. To empty out the water, please read
the paragraph «At the end of the programme».
Prewash
By selecting this option the machine performs a prewash cycle before the main
wash phase. The washing time will be pro-
9
8
Door locked
Child Lock
10
6 electrolux
longed. This option is recommended for
heavily soiled laundry.
Extra Rinse
This appliance is designed to save energy.
If it necessary to rinse the laundry using an
extra quantity of water (extra rinse), select
this option. Some additional rinses will be
performed. This option is recommended for
people who are allergic to detergents, and
in areas where the water is very soft.
Delay Start
The programme can be delayed from 30
min - 60 min - 90 min, 2 hours and then by
1 hour up to a maximum of 20 hours by
means of this button.
Start Pause
This button allows you to start or to interrupt the selected programme.
Display
7.4 7.5 7.1
Time Manager
These buttons allows you to modify the programme duration automatically proposed
by the appliance.
Door locked pilot light
The pilot light 9 illuminates when the programme starts and indicates if the door can
be opened:
• light on: the door cannot be opened. The
machine in working or has stopped with
water left in the tub.
• light off: the door can be opened. The programme is finished or the water has been
emptied out.
• light flashing: the door is opening
The display shows the following information:
7.1:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for example 2.05 ). The duration is calculated
automatically on the basis of the maximum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every minute.
• Delayed start
The Selected delay set by pressing the relevant button appears on the display for
7.27.3
few seconds, then the duration of the selected programme is displayed again.
• Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for example E20 (see paragraph «What to do if...»).
• Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed at the bottom
of the display for a few seconds and the
integrated red light of button 8 start flashing.
• End of programme
electrolux 7
When the programme has finished three
flashing zeros are displayed, the pilot light
9 and the pilot light of button 8 go out
and the door can be opened.
7.2: Washing programme phase icons
•
Wash
•
Rinses
•
Drain
•
Spin
By selecting the wash programme, the
washing programme phase icons corresponding to the various phases making up
the programme are shown in the bottom
part of the display. After having pressed button 8 only the icon of the running phase
stays on.
7.3: Heating phase
During the washing cycle the display shows
a temperature icon indicating that the appli-
PERSONALISATION
Acoustic signals
The machine is provided with an acoustic
device, which sounds in the following cases:
• at the end of the cycle
• if there is a fault.
By pressing the 4 and 5 buttons simultaneously for about 6 seconds , the acoustic
signal is deactivated (except if there is a
fault). By pressing these 2 buttons again,
the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unattended and not to worry that children might be injured by or cause damage
ance has started the heating phase of the
water in the tub.
7.4: Soil degree icons
•
Intensive
•
Normal
•
Daily
•
Light
•
Quick
•
Super Quick
•
Refresh
•
Super Refresh
When selecting a programme on the display appears an icon indicating the degree
of soiling automatically proposed by the machine.
7.5: Child safety lock
ty Lock» paragraph).
to the appliance. This function remains enabled also when the washing machine is not
working.
There are two different ways to set this option:
1. Before pressing button 8 : it will be im-
possible to start the machine.
2. After pressing button 8 : it will be impos-
sible to change any other programme or
option.
To enable or disable this option press simultaneously for about 6 seconds buttons 5
and 6 until on the display, the icon
pears or disappears.
(see «Child Safe-
ap-
FIRST USE
• Ensure that the electrical and water
connections comply with the installation instructions.
• Remove the polystyrene block and
any material from the drum.
• Pour 2 litres of water into the main
wash compartment
gent drawer in order to activate the
of the deter-
DAILY USE
Load the laundry
Open the door by carefully pulling the door
handle outwards. Place the laundry in the
ECO valve. Then run a cotton cycle
at the highest temperature without
any laundry in the machine, to remove any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the main
wash compartment and start the machine.
drum, one item at a time, shaking them out
as much as possible. Close the door.
8 electrolux
Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it into the main wash compartment
or in the appropriate compartment
if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).
If required, pour fabric softener into the compartment marked
(the amount used
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the required programme. The washing machine
will propose a temperature and automatically select the maximum spin value provided
for the programme you have chosen. You
can change these values by operating the
corresponding buttons. The green pilot
light of the button 8 starts to flash.
The selector dial can be turned either clockwise or counterclockwise. Turn to position
to reset programme/Switching the ma-
chine off.
At the end of the programme the selector dial must be turned to position
,
to switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 8 will blink 3 times
and the message Err is displayed to
indicate a wrong selection. The
machine will not perform the new
selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired programme and before pressing the button 8 .
electrolux 9
Select the temperature by pressing
button 2
By selecting a programme, the appliance
proposes automatically a default temperature.
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a different temperature.
Reduce the spin speed by pressing
button 3
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 3 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant light
illuminates.
Select the available option by pressing
buttons 3, 4 and 5
Depending on the selected programme, different functions can be combined before
pressing the button 8 . By selecting an option the relevant pilot light illuminates.
If an incorrect option is selected, the integrated red pilot light of the button 8 flashes 3
times and the Err message appears on the
display for few seconds.
For compatibility among the washing
programmes and the options see chapter «Washing Programmes».
Select the Delay Start by pressing
button 6
Before you start the programme, if you wish
to delay the start, press the button 6 repeatedly, to select the desired delay. The relevant pilot light goes on.
The selected delay time value (up to 20
hours) will appear on the display a few seconds, then the duration of the programme
will appear again.
You must select this option after you have
set the programme and before you press
button 8 .
You can cancel or modify the delay time at
any moment, before you press button 8 .
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton 6 .
3. Press button 8 :
– the machine starts its hourly count-
down.
– The programme will start after the se-
lected delay has expired.
Cancelling the delayed start after having
pressed button 8 :
1. Set the washing machine to PAUSE by
pressing button 8 .
2.
Press button 6 once until the symbol 0’
is displayed
3. Press button 8 again to start the pro-
gramme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start can not be selected with
DRAIN programme.
Start the programme by pressing
button 8
To start the selected programme, press the
button 8 , the green pilot light of the button
8 stops blinking.
To interrupt a programme which is running,
press the button 8 : the green pilot light
starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 8
again . If you have chosen a delayed start,
the machine will begin the countdown. If an
incorrect option is selected, the red pilot
light of the button 8 blinks for 3 times the
message Err is displayed for a few seconds.
Select the Time Manager option by
pressing buttons 10
By pressing these buttons repeatedly, the
duration of the washing cycle can be increased or decreased. The soil level icon
will appear on the display to indicate the
chosen degree of soil. This option is available only with
Cotton , Synthetic and Deli-
cate programmes.
Soil Level Icon Type of fabric
Intensive For heavy soiled
Normal For normal soiled
items
items
10 electrolux
Soil Level Icon Type of fabric
Daily For daily soiled items
Light For slightly soiled
Quick For very slightly
Super Quick
Refresh
Super Refresh
1) We recommend you to reduce the load sizes (see
Washing programmes table).
2) When you select this option the relevant icon appears
just for a while and then it disappears immediately.
1)
1)
1)
items
soiled items
For items used or
worn for a short time
2)
For refreshing items
only
2)
For refreshing a very
few items only
Altering an option or a running
programme
It is possible to change some options before the programme carries them out .
Before you make any change, you must
PAUSE the appliance by pressing the button 8 (if you wish to change the Time Manager option, you must cancel the running
programme and make your selection again).
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
and then to the new pro-
gramme position. Start the new programme
by pressing the button 8 again. The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 8 to interrupt a programme which is running, the corresponding green pilot light starts blinking.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to
to cancel a programme which is running.
You can select now a new programme.
Opening the door
After the programme has started (or during
the delay time) the door is locked, if you
need to open it, set first the machine to
PAUSE by pressing the button 8 .
After a few minutes the pilot light 9 goes
out and it is possible to open the door.
If this pilot light remains lit, this means that
the machine is already heating or that the
water level is too high. In any case, do not
try to force the door!
If you cannot open the door but you need
to open it you have to switch the machine
off by turning the selector dial to O . After a
few minutes the door can be opened (pay
attention to the water level and temperature!) .
After closing the door, it is necessary to select the programme and options again and
to press button 8 .
At the end of the programme
The machine stops automatically. Three
blinking 0.00 appear on the display and the
pilot light of button 8 goes off. Some acoustic signals sound.
If a programme or an option that ends with
water left in the tub has been selected, the
door remains locked to indicate that the water must be emptied out before opening the
door.
Follow the below instructions to empty out
the water:
1.
Turn the programme selector dial to O .
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, by
pressing the relevant button.
4. Press button 8 .
At the end of the programme, the door is released and can be opened. Turn the programme selector dial to O to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty. If you do
not intend to carry out another wash, close
the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
Stand by : once the programme has finished after a few minutes the energy saving system will be enabled. The brightness of the
display is reduced. By pressing any button
the appliance will come out of the energy
saving status.
HELPFUL HINTS AND TIPS
Sorting out the laundry
Follow the wash code symbols on each garment label and the manufacturer’s washing
instructions. Sort the laundry as follows:
whites, coloureds, synthetics, delicates,
woollens.
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first
wash; they should therefore be washed separately the first time.
Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long
tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove
hooks or tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by
just water and detergent. It is therefore advisable to treat them prior to washing.
Blood: treat fresh stains with cold water.
For dried stains, soak overnight in water
with a special detergent then rub in the
soap and water.
Oil based paint: moisten with benzine
stain remover, lay the garment on a soft
cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and
dab the stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since
the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with ace-
1)
tone
, lay the garment on a soft cloth and
dab the stain.
1) do not use acetone on artificial silk
electrolux 11
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with
bleach.
Ink: depending on the type of ink, moisten
the fabric first with acetone
1)
, then with acetic acid; treat any residual marks on white
fabrics with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the environment.
Although biodegradable, detergents contain
substances which, in large quantities, can
upset the delicate balance of nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washing machine detergents may be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics
(60°C max) and woollens
• liquid detergents, preferably for low tem-
perature wash programmes (60°C max)
for all types of fabric, or special for wool-
lens only.
The detergent and any additives must be
placed in the appropriate compartments of
the dispenser drawer before starting the
wash programme.
If using liquid detergents, a programme
without prewash must be selected.
Your appliance incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Follow the product manufacturer’s recommendations on quantities to use and do
not exceed the «MAX» mark in the detergent dispenser drawer .
12 electrolux
Quantity of detergent to be used
The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water
used.
Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during washing.
WASHING PROGRAMMES
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Katoen - Coton
90° - Cold
Main wash - Rinses
Maximum spin speed 1400 rpm
Max. load 6 kg - Reduced load 3 kg
For white and coloured cotton (normally soiled
items).
Synthetisch - Synthétique
60° - Cold
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 3 kg - Reduced load 1.5 kg
Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses.
Fijne was - Délicats
40° - Cold
Main wash - Rinses
Maximum spin speed 700 rpm
Max. load 3 kg - Reduced load 1.5 kg
Delicate fabrics: acrylics, viscose, polyester.
Wol / Handwas - Laine / Lavage à la main
1)
1)
1)
Degrees of water hardness
Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. If the water hardness degree is medium or high we
suggest you to add a water softener following always the manufacturer’s instructions.
When the degree of hardness is soft, readjust the quantity of the detergent.
Options
SPIN REDUCTION
RINSE HOLD
PREWASH
EXTRA RINSE
TIME MANAGER
SPIN REDUCTION
RINSE HOLD
PREWASH
EXTRA RINSE
TIME MANAGER
RINSE HOLD
PREWASH
EXTRA RINSE
TIME MANAGER
SPIN REDUCTION
RINSE HOLD
2)
2)
2)
Detergent
Compartment
40° - Cold
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 2 kg
Washing programme for machine washable wool as
well as for hand washable woollens and delicate fabrics with «hand washing» care symbol. Note : A single
or bulky item may cause imbalance. If the appliance
doesn’t perform the final spin phase, add more items,
redistribute the load manually and then select the spinning programme.
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Zijde - Soie
30° - Cold
Main wash - Rinses
Maximum spin speed 700 rpm
Max. load 1 kg
Delicate washing programme suitable for silk and
mixed synthetic items.
Lingerie
40° - Cold
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 1 kg
This programme is suitable for very delicate items
such a lingerie, bras and underwear.
Spoelen - Rinçages
Rinse - Long spin
Maximum spin speed 1400 rpm
Max. load 6 kg
With this programme it is possible to rinse and spin cotton garments which have been washed by hand. To intensify the rinsing action, select the option EXTRA
RINSE. The appliance will add some additional rinses.
Pompen - Vidange
Draining of water
Max. load 6 kg
For emptying out the water of the last rinse in programmes with the Rinse Hold option selected.
Centrifugeren - Essorage
Drain and long spin
Maximum spin speed 1400 rpm
Max. load 6 kg
Separate spin for hand washed garments and after programmes with the Rinse Hold option selected. You
can choose the spin speed by pressing the relevant
button to adapt it to the fabrics to be spun.
Katoen Eco - Coton Eco
90° - 40°
Main wash - Rinses
Maximum spin speed 1400 rpm
Max. load 6 kg
White and fast coloured cotton
This programme can be selected for slightly or normally soiled cotton items. The temperature will decrease
and the washing time will be extended. This allows to
obtain a good washing efficiency so saving energy.
electrolux 13
Options
Detergent
Compartment
RINSE HOLD
SPIN REDUCTION
RINSE HOLD
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
SPIN REDUCTION
SPIN REDUCTION
RINSE HOLD
PREWASH
2)
EXTRA RINSE
14 electrolux
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Antikreuk- Repassage facile
60°- Cold
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 1 kg
Selecting this programme the laundry is gently washed and spun to avoid any creasing. In this way ironing
is easier. Furthermore the machine will perform additional rinses.
Jeans
60° - Cold
Main wash - Rinses
Maximum spin speed 1200 rpm
Max. load 3 kg
With this programme it is possible to wash items like
pants, shirts or jackets in denim and also jersey realized with hi-tech materials (the Extra Rinse option will
be activated automatically).
Sport Intensief - Sport Intensif
40° - Cold
Prewash - Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 2.5 kg
This programme is suitable for washing heavily soiled
sport items. The machine will add automatically a prewash phase without detergent before the main wash
to eliminate mud stains.
Sport Kort - Sport Court
30°
Main wash - Rinses
Maximum spin speed 700 rpm
Max. load 2.5 kg
Short programme for lightly soiled mixed fabric sports
clothes.
/OFF
For cancelling the programme which is running or to
switch the machine off .
1) If you select the Quick or Super Quick option by pressing button 10 , we recommend that you reduce the
maximum load as indicated. Full loading is possible however with somewhat reduced cleaning results. If you
select the Refresh or Super Refresh option, we recommend that you reduce the load even more.
2) If using liquid detergents, a programme without PREWASH must be selected.
Options
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
SPIN REDUCTION
RINSE HOLD
PREWASH
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
2)
Detergent
Compartment
CARE AND CLEANING
Warning! You must disconnect the
appliance from the electricity supply,
before you can carry out any cleaning
or maintenance work.
Descaling
The water we use normally contains lime. It
is a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder manufac-
turer's instructions. This will help to prevent
the formation of lime deposits.
After each wash
Leave the door open for a while. This helps
to prevent mould and stagnant smells forming inside the appliance. Keeping the door
open after a wash will also help to preserve
the door seal.
Maintenance wash
With the use of low temperature washes it
is possible to get a build up of residues inside the drum.
We recommend that a maintenance wash
be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash programme.
• Use a normal measure of detergent,
must be a powder with biological properties.
External cleaning
Clean the exterior cabinet of the appliance
with soap and water only, and then dry thoroughly.
Important! Do not use methylated spirits,
solvents or similar products to clean the
cabinet.
Cleaning the dispenser drawer
The detergent dispenser drawer should be
cleaned regularly.
The washing powder and additive dispenser drawer should be cleaned regularly.
Remove the drawer by pressing the catch
downwards and by pulling it out.
electrolux 15
Flush it out under a tap, to remove any
traces of accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed. Clean all
parts with water.
Clean the chamber of dispenser drawer
with a brush.
16 electrolux
Washing drum
Rust deposits in the drum may occur due
to rusting foreign bodies in the washing or
tap water containing iron.
Important! Do not clean the drum with
acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum
with a cleaning agent for stainless steel.
2. Run a washing cycle without any wash-
ing to clean off any cleaning agent residues.
Programme: Short Cotton Programme
at maximum temperature and add approx. 1/4 measuring cup of detergent.
Door seal
Check from time to time the door seal and
eliminate eventual possible objects that
could be trapped in the fold.
Drain pump
The pump should be inspected regularly
and particularly if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise during draining due to objects such as safety
pins, coins etc. blocking the pump.
• a problem with water draining is detected
(see chapter “What to do if...” for more details).
Warning! Before opening the pump
door, switch the appliance off and
remove the mains plug from the socket.
Proceed as follows:
1. Unplug the appliance.
2. If it is necessary, wait until the water
has cooled down.
3. Open the pump door.
4. Place a container close to the pump to
collect any spillage.
5. Pull out the emergency emptying hose,
place it in the container and remove its
cap.
6. When no more water comes out, unscrew the pump cover by turning it anticlockwise and remove the filter. Use pliers, if necessary. Always keep a rag
nearby to dry up any water spillages
when removing the cover.
Clean the filter under a tap, to remove
any traces of fluff.
7. Remove foreign bodies and fluff from
the filter seat and from the pump impeller.
electrolux 17
9. Put the cap back on the emergency
emptying hose and place the latter
back in its seat.
10. Replace the filter into the pump by inserting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
8. Check carefully whether the pump impeller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
11. Close the pump door.
Loading...