Please read these operating instructions carefully
and pay particular attention to the safety notes
indicated in the first pages. We recommend that you
keep this instruction booklet for future reference and
pass it on to any future owners.
Transport damages
When unpacking the appliance, check that it is not
damaged. If in doubt, do not use it and contact the
Service Centre.
The symbols you will see on some paragraphs of this booklet have the following meaning:
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly
important for your safety or correct functioning of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use of
the appliance.
Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the
environment: we use environmentally
friendly paper.
2
Page 3
Contents
Warnings4
Disposal5
Tips for environmental protection5
Technical specifications6
Installation7
Unpacking7
Positioning7
Water inlet7
Water drainage8
Electrical connection8
Your new washing machine9
Description of the appliance9
Door locked pilot light9
Detergent dispenser drawer9
Use10
Control panel10
Controls10-13
Washing hints14
Sorting the laundry14
Temperatures14
Before loading the laundry14
Maximum loads14
Laundry weights14
Removing stains14
Detergents and additives15
Bodywork21
After each wash21
Detergent dispenser drawer21
Drain filter21
Water inlet filter22
Emergency emptying out22
The dangers of freezing22
ENGLISH
Something not working?23-24
3
Page 4
Warnings
P1076
The following warnings are provided in the interests of overall safety. You must read them carefully before
installing or using the appliance.
General safety
• Repairs to the machine must be carried out only by
qualified personnel. Repairs carried out by
inexperienced persons could cause serious
danger. Contact your local Service Centre.
• Never start the machine if the electrical supply
cable is damaged or the control panel or worktop
are so damaged that inner components can be
reached.
• Unplug the appliance before carrying out any
cleaning or maintenance operations.
• Never pull the power supply cable to remove the
plug from the socket; always take hold of the plug
itself.
• Never spray the machine with a jet of water.
Danger of electric shock!
• During high temperature wash programmes the
door glass may get hot. Do not touch it!
• Let the water cool down before carrying out
emergency emptying or before opening the door in
an emergency.
• Small animals can gnaw electric wires and water
hoses causing electrocution hazard and damage
due to water leaks.
• Do not use your machine for dry cleaning.
• Dyes and bleaching agents may only be used if
specifically permitted by the manufacturer of these
products. We cannot be held responsible for any
damage.
• Always unplug the appliance and turn off the water
tap after use.
Child safety
• Children are often not aware of how dangerous
electrical appliances can be. When the machine is
working, children should be carefully supervised
and not be allowed to play with the appliance there is a risk that they could become trapped
inside.
• The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children - danger
of suffocation! Keep them out of children’s reach.
• Keep all detergents in a safe place out of children’s
reach.
• When the appliance is to be scrapped, cut off the
electrical supply cable and destroy the plug with
the remaining cable. Disable the door catch in
order to prevent children from becoming trapped
inside while playing.
Positioning, connection, starting up
• Follow the instructions for positioning and
connection.
• Carry out a first wash without laundry (COTTONS
60, with half the amount of detergent) in order to
remove any manufacturing residue from the tub
and the drum.
• Should the machine be purchased in winter, when
temperatures can be below 0°, leave the appliance
for 24 hours at ambient temperature before starting it.
Proper use
• This appliance is designed for domestic use only. If
the machine is used for any other purposes or is
not used correctly, the manufacturer accepts no
responsibility for any damage that might occur.
• For safety reasons, the appliance must not be
modified.
• Use only detergents suitable for washing machines
and follow the manufacturer’s instructions.
• Garments which have been in contact with
flammable solvents should not be machine washed.
Child safety feature
• This machine incorporates a special child safety
feature to prevent small children from being
trapped inside the machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the
groove is horizontal. If necessary use a coin. To
disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise
until the groove is vertical.
4
Page 5
Disposal
ENGLISH
Packaging materials
The materials marked with the symbol are
recyclable.
This means that they can be recycled by disposing of
them properly in appropriate collection containers.
Tips for environmental protection
To save water, energy and to help protect the
environment, we recommend that you follow these
tips:
• Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
• The machine works more economically if it is fully
loaded.
Machine
Use authorised disposal sites for your old appliance.
Help to keep your country tidy!
• With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
• Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
5
Page 6
Technical specifications
DIMENSIONSHeight85 cm
Width60 cm
Depth62 cm
MAXIMUM LOADCotton5.0 kg
Synthetics2,5 kg
Delicates2,5 kg
Woollens / Hand wash2kg
SPIN SPEED1200 rpm max. (EW 1200N)
1600 rpm max. (EW 1600N)
POWER SUPPLY VOLTAGE/FREQUENCY220-230 V/50 Hz
TOTAL POWER ABSORBED2200 W
MINIMUM FUSE PROTECTION10 A
WATER PRESSUREMinimum500 kPa
Maximum800 kPa
This appliance complies with the following EEC Directives:
73/23/EEC of 19/02/73 relating to low voltage
89/336/EEC of 03/05/89 relating to electromagnetic compatibility.
6
Page 7
Installation
P0001
P0021
P1051
P0002
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so that
they can be refitted if the machine ever has to be
transported again.
1. Using a spanner, unscrew and remove the two
rear bottom screws. Slide out the two plastic pins.
2. Lay the machine on its back, taking care not to
squash the hoses. This can be avoided by
placing one of the corner packing pieces between
the machine and the floor.
3. Remove the polystyrene block from the bottom of
the machine and release the two plastic bags.
7. Plug the open holes with the plugs which are
supplied with the instruction booklet.
ENGLISH
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is
not impeded by carpets, rugs etc. Check that the
machine does not touch the wall or other kitchen
units.
Carefully level by screwing the adjustable feet in or
out. Never place cardboard, wood or similar
materials under the machine to compensate for any
unevenness in the floor.
4. Very carefully slide out the left polythene bag,
removing it towards the right and then downwards.
5. Very carefully slide out the right polythene bag,
removing it towards the left and then upwards.
6. Set the machine upright and remove the
remaining rear screw from the back. Slide out
the relevant pin.
Water inlet
Connect the water inlet hose to a tap with a 3/4" thread.
The other end of the inlet hose which connects to the
machine can be turned in any direction. Simply
loosen the fitting, rotate the hose and retighten the
fitting, making sure there are no water leaks.
P1088
The inlet hose must not be lengthened. If it is too
short and you do not wish to move the tap, you will
have to purchase a new, longer hose specially
designed for this type of use.
7
Page 8
Water drainage
P0023
P0022
Electrical connection
The end of the drain hose can be positioned in three
ways:
Hooked over the edge of a sink using the plastic
hose guide supplied with the machine. In this
case, make sure the end cannot come unhooked
when the machine is emptying.
This could be done by tying it to the tap with a piece
of string or attaching it to the wall.
In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm
above the ground.
Directly into a drain pipe at a height of not less
than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain pipe
must be larger than the outside diameter of the drain
hose.
The drain hose must not be kinked. Run it along the
floor; only the part near the drainage point must be
raised.
This machine is designed to operate on a 220-230 V,
single-phase, 50 Hz supply.
Check that your domestic electrical installation can
take the maximum load required (2.2 kW), also
taking into account any other appliances in use.
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
Should the appliance power supply cable
need to be replaced, this should be carried
out by our Service Centre.
The power supply cable must be easily
accessible after installing the machine.
8
Page 9
Your new washing machine
C0063
This new machine, which is fitted with the Direct Spray system, patented Electrolux, meets all modern needs
for effective treatment of laundry with low water, energy and detergent consumption.
Further savings are achieved by washing small loads of laundry, since water and electricity consumption is
proportional to the quantity and type of laundry being washed.
• Selection of the programme and temperature by means of the relevant buttons.
• The programme phase indicator shows the wash cycle progress.
• The programme progress display shows the programme steps selected and the programme phase which
is running.
• The Delay Start option allows you to delay starting of the wash programme to the desired time of day.
• The Anticrease function (stop with water in drum) can be selected for all fabrics: the laundry is left
immersed in the final rinse water to avoid the formation of creases.
• The special wool programme with its new delicate wash system treats your woollens with extreme care.
• 3-compartment drawer for detergent and fabric softener.
• The balance control device ensures the machine is stable during the spin.
ENGLISH
Description of the appliance
1 Detergent dispenser drawer
2 Control panel
3 Door locked light
4 Door opening handle
5 Drain filter
6 Adjustable feet
Door locked light
It stays on during the whole programme indicating
that the door is locked.
When the light goes out, the door can be opened
(see page 13).
Detergent dispenser drawer
Prewash
Main wash
Fabric softener, starch
9
Page 10
Use
Control panel
1 ON/OFF button (Açma/Kapama)
Press this button to switch the washing machine on.
The display (8) will show three blinking dashes or a
blinking zero. You will find more detailed
explanations on pages 11-12 (see “DISPLAY”).
Press the ON/OFF button again to switch the
machine off.
2 Mains-on light
This light is connected to the ON/OFF button. It lights
up when you press the button, and goes out when
you press it again.
3 FABRIC button (Çamaçır)
Press this button repeatedly to select the programme
on the basis of the type of laundry to be washed. The
light relevant to the selected programme will light up.
The washing machine will propose a temperature
and automatically select the maximum spin value
provided for the programme you have chosen.
You can change these values by operating buttons
4 and 5.
Hand wash (Elde Yıkananlar)
When you select this programme, you obtain a
particularly delicate washing, suitable for articles of
clothing whose label indicates that they must be
hand-washed .
4 TEMPERATURE button (Sıcaklık)
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the washing machine. The relevant light
will light up.
Maximum temperatures are 95°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed (HAND WASH
programme).
Position SOGUK corresponds to a COLD WASH.
This option can be used for very delicate laundry,
such as curtains.
Important!
By depressing TEMPERATURE and SPIN SPEED
buttons simultaneously, the acoustic signal at the
end of the cycle is suppressed.
5 SPIN SPEED button (DEVIR)
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine. The relevant light will light up.
Maximum speeds are:
• for synthetic fabrics, wool, and fabrics to be hand-
washed: 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD position (SUDA BEKLETME): when
you choose this option, the machine will not drain the
water of the last rinse, so as not to wrinkle the
laundry.
At the end of the cycle, the light of the
START/PAUSE button (BAÇLAT/BEKLET) will flash,
to indicate that the water must be drained.
To complete the cycle, choose one of the following
options:
10
Page 11
• Draining and spin:
2.05
- Press the START/PAUSE button. The machine will
drain the water, then spin the laundry at the maximum
speed provided for the performed programme.
- Select spin speed by means of button 5, and
press the START/PAUSE button.
• Drain only
- Press the SKIP/RESET button (ILERLETME/IPTAL)
once, so as to cause the DRAIN light (BOÇALTMA)
to light up, then press the START/PAUSE button.
switch the machine on, if the previously selected
cycle has been erased.
ENGLISH
Important!
If you accidentally press the SKIP/RESET button
more than once, the display will show three blinkingdashes. To cause the washing machine to drain the
water, select any washing programme by means of
the FABRIC button, then press SKIP/RESET threetimes in order to select the DRAIN position (only the
DRAIN light will remain lit).
6 OPTIONS button (SEÇENEKLER)
Press this button to select the following options:
• PREWASH (ÖN YIKAMA): select this option if you
wish your laundry to be prewashed before the main
wash (not available for wool and hand-wash cycle).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained.
• SUPER RINSE (EKSTRA DURULAMA): this
option can be selected with all programmes exceptthe wool programme and hand wash. The
machine performs 4 rinses instead of 3. This option
is recommended for people who are allergic to
detergents, and in areas where the water is very soft.
7 QUICK WASH (HIZLI YIKAMA)
•
Duration of washing programme in hours and
minutes, after you have selected a programme.
While the programme is running (after you have
pressed the START/PAUSE button
BAÇLAT/BEKLET), the displayed time value
decreases by one unit every minute.
• The washing machine has stopped with water in
the tub, at the end of a programme with the RINSE
HOLD (SUDA BEKLETME) option: this is indicated
by a static zero.
• The washing machine has completed the
programme: this is indicated by a blinking zero. At
the same time, the door locked light goes out. The
zero will reappear when you switch the washing
machine on, unless the previous programme has
been erased by means of the SKIP RESET
(ILERLETME/IPTAL) button.
This button allows you to select the QUICK WASH
function, for laundry that is only slightly soiled (notfor wool and HAND WASH programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
8 Display
The following pieces of information are shown on the
display:
• Three blinking dashes, when a programme is
cancelled by means of the SKIP/RESET
(BAÇLAT/BEKLET) button.
The three blinking dashes will also appear when you
press the ON/OFF (AÇMA KAPAMA) button to
Important!
The first time you use the washing machine,
when you switch it on, it may display a blinking zero
and give an audible warning signal. This is due to the
fact that the washing machine has performed a
washing cycle during the manufacturer’s inspection
11
Page 12
tests, and this cycle has not been erased after its
completion.
• Delay start, a time value indicated in hours and
selected by means of the relevant button
(GECIKTIRME).
The delay time is displayed for 5 seconds, then the
duration of the selected programme reappears.
After you have pressed the START/PAUSE button,
the countdown begins, and the delay time value
decreases by one unit every hour.
You can delay the start of the selected programme
by up to 24 hours in one hour intervals.
9 START/PAUSE button
(Baçlat/Beklet)
This button has three functions:
• Start: after you have selected the desired
programme and options, press this button to start the
washing machine. The light above the button will
stop flashing and remain lit.
If you have selected a delay time by means of
button L, the countdown will begin and will be shown
on the display.
• Pause: when you press this button again, the
programme in progress is interrupted. The light
above the button will start flashing. To restart the
programme, press the button again.
When you PAUSE the cycle, the DOOR LOCKED
light goes out, and it becomes possible to open the
door, provided
• the washing machine is not in the heating phase;
• An incorrect option selection has been made:
this is indicated by the message Err when a function
incompatible with the current programme is selected.
The incorrect selection is also indicated by an
audible warning signal.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter on page 23).
• the level of the water is not high;
• the drum is not turning.
Important!
You must set the washing machine to PAUSE before
you make any change in the programme in progress.
• Draining of water and spinning after the
execution of programmes with the RINSE HOLD
(SUDA BEKETME) option.
10 SKIP/RESET button
(ILERLETME/IPTAL)
At the end of a programme, you must press this
button once or repeatedly, in order to clear the
contents of the memory (the display will show three
blinking dashes); otherwise, the next time you switch
the washing machine on, the blinking zero will
reappear and the audible warning signals relevant to
the end of the previous cycle will be given.
You can also press the SKIP/RESET button to
exclude one or several phases of the programme
which is running, as indicated below.
- set the washing machine to PAUSE by pressing the
START/PAUSE button (the relevant light will flash);
- press the SKIP/RESET button once or several
times, until the required phase(s) is(are) cancelled
(the light next to the name of the phase(s) will go
out).
12
Page 13
Example:
PREWASH
ÖN YIKAMA
WASH
YIKAMA
RINSES
DURULAMA
SPIN
SIKMA
DRAIN
BOSALTMA
PREWASH
ÖN YIKAMA
WASH
YIKAMA
RINSES
DURULAMA
SPIN
SIKMA
DRAIN
BOSALTMA
PREWASH
ÖN YIKAMA
WASH
YIKAMA
RINSES
DURULAMA
SPIN
SIKMA
DRAIN
BOSALTMA
In this case, both the
drain and the spin (at
the speed provided for
the selected type of
fabric) will be
performed.
This button allows you also to select special
programmes, such as RINSES, SPIN and DRAIN.
• If the machine is already switched on because it
has just performed a washing programme, proceed
as follows:
- depress SKIP/RESET once or repeatidly to cancel
the previously performed programme;
- select the type of fabric by means of button
“ÇAMASIR”;
- select the special programme:
• RINSES (DURULAMA)
Depress SKIP/RESET once, the pilot light YIKAMA
(WASH) goes out.
• SPIN (SIKMA)
Depress SKIP/RESET twice, the pilot lights
YIKAMA (WASH) and DURULAMA (RINSES) go
out.
• DRAIN (BOÇALTMA)
Depress SKIP/RESET three times, the pilot lights
YIKAMA (WASH), DURULAMA (RINSES) and
SIKMA (SPIN) go out.
Example:
In this case the machine
will perform the rinses
followed by the spin.
11 DELAY START button
(GECIKTIRME)
This button makes it possible to delay the starting of
the programme by up to 24 hours. The delay you
have selected is shown on the display for about 5
seconds; afterwards, the duration of the programme
reappears.
You must select this option after you have set the
programme and before you press the
START/PAUSE button.
The time value shown on the display will decrease
by one unit every hour.
You can change the delay time at any moment,
before you press the START/PAUSE button.
If you have already pressed the START/PAUSE
button, and you wish to change or cancel the delay
time, proceed as follows:
• set the washing machine to PAUSE by pressing the
START/PAUSE button;
• press the DELAY button until the display shows the
desired delay time or
• press the DELAY button once, to erase the delay
time. The display will indicate “0h”.
• press the START/PAUSE button again.
Important!
The door will be locked throughout the delay time
(DOOR LOCKED light lit).
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
12 Programme phase indicator lights
ENGLISH
• If the machine is switched off:
- depress ON/OFF (AÇMA/KAPAMA) button to
switch it on;
- select the type of fabric by means of button
“ÇAMAÇIR”;
- select the special programme as previously described.
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started
the programme, only
the light relevant to
the phase that is
currently being carried
out will remain lit.
13
Page 14
Washing hints
Sorting the laundry
Follow the wash code symbols on each garment
label and the manufacturer’s washing instructions.
Sort the laundry as follows:
whites, coloureds, synthetics, delicates, woollens.
Temperatures
95°for normally soiled white cottons and linen
(e.g. tea cloths, towels, tablecloths,
sheets...)
60°for normally soiled, colour fast garments
(e.g. shirts, night dresses, pyjamas....) in
linen, cotton or synthetic fibres and for
lightly soiled white cotton (e.g. underwear).
(cold)for delicate items (e.g. net curtains), mixed
30°-40° laundry including synthetic fibres and
woollens.
Laundry weights
The following weights are indicative:
bathrobe1200 g
napkin100 g
quilt cover700 g
sheet500 g
pillow case200 g
tablecloth250 g
towelling towel200 g
tea cloth100 g
night dress200 g
ladies’ briefs100 g
man’s work shirt600 g
man’s shirt200 g
man’s pyjamas500 g
blouse100 g
men’s underpants100 g
Before loading the laundry
Never wash whites and coloureds together. Whites
may lose their “whiteness” in the wash.
New coloured items may run in the first wash; they
should therefore be washed separately the first time.
Make sure that no metal objects are left in the
laundry (e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks
and poppers. Tie any belts or long tapes.
Remove persistent stains before washing. Rub
particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie
them up in a bag or net.
Maximum loads
Recommended loads are indicated in the
programme charts.
General rules:
Cotton, linen: drum full but not too tightly packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more than
one third full.
Washing a maximum load makes the most efficient
use of water and energy.
For heavily soiled laundry, reduce the load size.
Removing stains
Stubborn stains may not be removed by just water
and detergent. It is therefore advisable to treat them
prior to washing.
Blood: treat fresh stains with cold water. For dried
stains, soak overnight in water with a special
detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and dab the
stain; treat several times.
Dried grease stains: moisten with turpentine, lay
the garment on a soft surface and dab the stain with
the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with rust
stains which are not recent since the cellulose
structure will already have been damaged and the
fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites
and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and
fast coloureds only).
Ball point pen and glue: moisten with acetone (*),
lay the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat
stains with methylated spirits. Remove any residual
marks from white fabrics with bleach.
Red wine: soak in water and detergent, rinse and
treat with acetic or citric acid, then rinse. Treat any
residual marks with bleach.
14
Page 15
Ink: depending on the type of ink, moisten the fabric
first with acetone (*), then with acetic acid; treat any
residual marks on white fabrics with bleach and then
rinse thoroughly.
Tar stains: first treat with stain remover, methylated
spirits or benzine, then rub with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the choice of
detergent and use of the correct quantities to avoid
waste and protect the environment. Although
biodegradable, detergents contain substances
which, in large quantities, can upset the delicate
balance of nature.
The choice of detergent will depend on the type of
fabric (delicates, woollens, cottons, etc.), the colour,
washing temperature and degree of soiling.
All commonly available washing machine detergents
may be used in this appliance:
– powder detergents for all types of fabric,
– powder detergents for delicate fabrics (60°C max)
and woollens,
– liquid detergents, preferably for low temperature
wash programmes (60°C max) for all types of
fabric, or special for woollens only.
The detergent and any additives must be placed in
the appropriate compartments of the dispenser
drawer before starting the wash programme.
If using concentrated powder or liquid detergents, a
programme without prewash must be selected.
The washing machine incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Pour liquid detergent into the dispenser drawer
compartment marked just before starting the
programme.
Any fabric softener or starching additives must be
poured into the compartment marked before
starting the wash programme.
Follow the product manufacturer’s recommendations
on quantities to use and do not exceed the «MAX»
mark in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend on
the type of fabric, load size, degree of soiling and
hardness of the water used.
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in
your area can be obtained from the relevant water
supply company, or from your local authority.
Follow the product manufacturers’ instructions on
quantities to use.
Use less detergent if:
– you are washing a small load,
– the laundry is lightly soiled,
– large amounts of foam form during washing.
Degrees of water hardness
Degrees
LevelCharacteristic
1
2
3
4
soft
medium
hard
very hard
«JETSYSTEM» wash
As the Jetsystem is flexible and adjusts water intake
according to wash load size it is not possible to give
you exact recommendations as to the amount of
detergent that should be used for any one wash.
Therefore we recommend that you use
approximately 1/3 less than the detergent
manufacturer recommends on the packet or bottle,
making the appropriate allowances for soft or hard
water, and light or heavy soilage of clothes. If you
have judged the amount correctly you should expect
to see a soft sudsy liquid during the wash. It is not
necessary to have a head of lather on the water.
German
°dH
0- 7
8-14
15-21
more than
21
French
°T.H.
0-15
16-25
26-37
more than
37
ENGLISH
15
Page 16
PREWASH
ÖN YIKAMA
WASH
YIKAMA
RINSES
DURULAMA
SPIN
SIKMA
DRAIN
BOSALTMA
Operating sequence
C0065
C0064
P1084
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
4. Switch the machine on
Press the ON/OFF button (AÇMA KAPAMA) to
switch the machine on. The display will show three
blinking dashes or a blinking zero. The light above
the button will light up.
5 Select the desired
programme/fabric
Press the FABRIC button (ÇAMAÇIR) repeatedly, in
order to select the desired programme/fabric. The
relevant light will light up.
The lights relevant to the phases that form the
programme will light up.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked .
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The light of
START/PAUSE button will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the execution
of the cycle.
16
Page 17
6 Select the temperature
9 Select the QUICK WASH option
Press the TEMPERATURE button SICAKLIK if you
wish to select a temperature value different from the
one proposed by the washing machine or the COLD
WASH “SOGUK”.
The relevant light will light up.
7 Select the SPIN SPEED or the RINSE
HOLD option (SUDA BEKLETME)
Press the SPIN SPEED button “DEVIR” repeatedly, in
order to select the desired spin speed or the RINSE
HOLD (SUDA BEKLETME) option. The relevant light
will light up.
If you select the RINSE HOLD option, the machine
will stop at the end of the programme with the water
still in the tub.
(HIZLI YIKAMA)
Depress button HIZLI YIKAMA to select the QUICK
WASH option, if your laundry is only slightly soiled.
The relevant light illuminates.
10 Select the DELAY TIME
Before you start the programme, if you wish the
starting to be delayed, press the DELAY button
GECIKTIRME repeatedly, or keep it pressed, to
select the desired delay. The selected delay time
value (up to 24 hours) will appear on the display for 5
seconds, then the duration of the programme will
appear again.
ENGLISH
8 Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH option “ÖN YIKAMA”.
If you wish the laundry to undergo an extra rinse,
select the super rinse option “EKSTRA
DURULAMA”.
Press the OPTIONS button “SEÇENEKLER” so as to
cause one or both of the lights to light up.
11 Start the programme
Press the START/PAUSE button . The relevant
light will stop flashing, the DOOR LOCKED light will
light up, and only the light relevant to the phase that
is in progress will remain lit.
If you have chosen a delayed start, the washing
machine will begin the countdown.
The display will show the duration of the programme
or the selected delay.
17
Page 18
12 How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the
programme carries it out.
Changing the type of fabric or temperature is
possible, obviously, only during the washing phase.
When you make a change in these two parameters,
the washing machine will resume the cycle from thebeginning.
If it is necessary to drain the water in order to change
the programme in progress, proceed as follows:
• PAUSE the machine by pressing the
START/PAUSE button;
• press the SKIP/RESET button
(ILERLETME/IPTAL) repeatedly, until only the
DRAIN light (BOÇALTMA) remains lit;
• press the START/PAUSE button again.
When the water has been drained, the display shows
a blinking zero. You may now select a new
programme and press the START/PAUSE button to
start it.
13 How to cancel a programme
during its cycle
To cancel a programme that is being carried out, first
pause the washing machine by pressing the
START/PAUSE button , then press the
SKIP/RESET button (ILERLETME/IPTAL) repeatedly,
until the display shows three blinking dashes.
14 How to open the door during
the cycle of a programme
You can open the door, after having set the washing
machine to PAUSE, provided the following
conditions exist:
• the washing machine is not in the heating phase
beyond 40°C;
• the level of the water is not high;
• the drum is not turning.
If these requirements are met, when you pause the
washing machine, the DOOR LOCKED light goes
out and the door can be opened.
should it be absolutely necessary to do so, switch
the machine off by pressing the ON/OFF button
“AÇMA/KAPAMA”.
After approximately 2 minutes, you can open the
door.
Pay attention to the level and temperature of the
water in the washing machine!
When you close the door and press the ON/OFF
button again, the washing machine will resume the
programme from the point where it had been
interrupted.
15 End of programme
At the end of the programme, the washing machine
stops automatically, gives an audible signal, and
displays a blinking zero.
If you had selected the RINSE HOLD option,
the START/PAUSE button light flashes to indicate
that the water must be drained. The display shows a
steadily lit zero.
When the programme has been completed, a
blinking zero appears on the display and the audible
signal is given.
The DOOR LOCKED light goes out at once.
Press the SKIP/RESET button repeatedly to erase
the programme that has just been carried out. If
you omit to do this, the next time you switch the
washing machine on, the blinking zero will
appear on the display and you will hear the
audible signal.
Note: when you switch the machine on, if you must
erase the previously performed programme, it is also
sufficient to press the FABRIC button “ÇAMAÇIR”
and select a new programme.
Press the ON/OFF button to switch the machine
off. The relevant light will go out.
Remove the laundry from the washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get
damaged in a subsequent wash (e.g. by shrinking) or
bleed colour into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the washing
machine.
Should it not be possible to open the door, and
18
Page 19
Programme chart
Washing programmes
Wash programmeTemp.
Cottons (Whites)
Beyazlar
Cottons *
(Coloureds)
Beyazlar
Synthetic fabrics
Sintetikler
Delicate fabrics
Narın çamaçirlar
60°-95°
60°-40°-30°
COLD
SOGUK
60°-40°-30°
COLD
SOGUK
40°-30°
COLD
SOGUK
Fabrics
Cotton fabrics
e.g. sheets,
tablecloths,
household, linen
Coloured cotton or
linen items, e.g.
shirts, blouses,
underwear, towels,
household, linen
Synthetic or
mixed fabrics
e.g. shirts,
blouses,
underwear
* This programme at 60°C with a load of 5 kg is the reference programme for the data entered in the energy
label, in compliance with EEC 92/75 standards.
** This data is given purely as an indication: the consumption values may vary in relation to the quantity and
type of laundry, the temper-ature of the water supply and the ambient temperature. The data refers to the
highest temperature provided for each programme and to a load of 5 kg of cotton items.
40°-30°
COLD
SOGUK
40°-30°
COLD
SOGUK
Wool marked
pure new wool,
washable,
preshrunk
Wool mixtures,
silk
SPIN SPEED
RINSE HOLD
SPIN SPEED
RINSE HOLD
2 kg
2 kg
0.304857
0.254655
19
Page 20
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Energetic wash
Delicate wash
Max. wash
temperature
95°C
Max. wash
temperature
60°C
Max. wash
temperature
40°C
Max. wash
temperature
30°C
Hand washDo not
wash
at all
BleachingBleach in cold waterDo not bleach
IroningHot iron
max 200°C
Warm iron
max 150°C
Lukewarm iron
max 110°C
Do not iron
Dry cleaningDry cleaning
in all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning
in petrol,
pure alcohol
and R 113
Do not
dry clean
DryingFlatOn the lineOn clothes
hanger
Tumble dry
high
temperature
low
temperature
Do not
tumb
le dr
y
A
P
F
95
60
60
40
40
40
30
30
20
Page 21
Cleaning and maintenance
P0038
C0067
C0066
P0040
P1061
P1085
P1050
1. After each wash
At the end of the wash programme, pull the
dispenser drawer out a little to let it dry.
Leave the door ajar to allow air to circulate.
If the machine is not used for a prolonged
period:
Close the water tap and unplug the appliance.
2. Bodywork
Clean the outside of the machine with soap and
water only. Rinse with clean water and dry with a soft
cloth.
Important: do not use methylated spirits, solvents or
similar products to clean the bodywork.
3. Detergent dispenser drawer
After a while, detergents and fabric softeners leave
deposits in the drawer.
Clean the drawer from time to time by rinsing it under
a running tap. To remove the drawer from the
machine, press the button in the rear left-hand
corner.
To facilitate cleaning, the top part of the additive
compartments can be removed.
4. Door seal
Check from time to time the door seal and eliminate
eventual possible objects that could be trapped in
the fold.
5. Drain filter
The drain filter collects threads and small objects
inadvertently left in the laundry. Check regularly that
the filter is clean.
Open the filter door by pulling it towards the right.
Place a container under the filter to catch any
spillage.
Release the emergency emptying hose, place it in
the container, and remove its cap by unscrewing it.
ENGLISH
Detergent can also accumulate inside the drawer
recess: clean it with an old toothbrush. Refit the
drawer after cleaning.
P1062
When no more water comes out, unscrew the filter
and remove it.
Clean the filter under a running tap, then refit it,
screwing it fully in.
Put the cap back on the emergency emptying hose,
place the latter back in its seat. Close the filter door.
21
Page 22
6. Water inlet filter
P1090
8. The dangers of freezing
If you notice that the machine is taking longer to fill,
check that the filter in the water inlet hose is not
blocked.
Turn off the water tap.
Unscrew the hose from the tap.
Clean the filter with a stiff brush.
Refit the filter and screw the hose back onto the tap.
7. Emergency emptying out
If the machine is unable to drain, proceed as follows
to empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• place a bowl on the floor under the filter and place
the end of the emergency emptying hose into the
bowl. The water should drain by gravity into the
bowl. When the bowl is full, screw the cap on
again. Empty the bowl. Repeat the procedure until
water stops flowing out;
• at the end screw the filter again.
If the machine is exposed to temperatures below
0°C, certain precautions should be taken.
Turn off the water tap.
Unscrew the inlet hose.
Place the end of the inlet hose and that of the
emergency emptying hose in a bowl placed on the
floor and let the water drain out.
Screw the water inlet hose back on and put the
emergency emptying hose back in its place after
having screwed the cap on again.
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
22
Page 23
Something not working?
Problems which you can resolve yourself.
During machine operation it is possible that one of the following alarm codes appears on the display:
- E10 : problem with the water supply
- E20 : problem with water draining
- E40 : door open
Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after
all checks, the problem persists, contact your local Service Centre.
ProblemPossible cause
ENGLISH
• The machine does not start up:
• The machine does not fill:
• The machine fills then empties
immediately:
• The machine does not empty
and/or does not spin:
• There is water on the floor:
• Unsatisfactory washing results:
• The machine vibrates or is
noisy:
• The door will not open:
• The door is not firmly closed. (E40)
• The machine is not plugged in or there is no power
at the socket.
• The main fuse has blown.
• The START/PAUSE button has not been
depressed.
• The DELAY START option has been selected.
• The water tap is closed. (E10)
• The inlet hose is squashed or kinked. (E10)
• The filter in the inlet hose is blocked. (E10)
• The door is not properly closed. (E40)
• The end of the drain hose is too low.
• The drain hose is squashed or kinked. (E20)
• The RINSE HOLD option (stop with water in the
drum) has been selected.
• The drain filter is clogged. (E20)
• Too much detergent or unsuitable detergent
(creates too much foam) has been used.
• Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
• The drain hose is damaged.
• Too little detergent or unsuitable detergent has
been used.
• Stubborn stains have not been treated prior to
washing.
• The correct temperature was not selected.
• Excessive laundry load.
• The transit bolts and packing have not been
removed.
• The support feet have not been adjusted.
• The laundry is not evenly distributed in the drum.
• Maybe there is very little laundry in the drum.
• The water level is above the bottom edge of the door.
• The machine is heating the water.
• The drum is turning.
The door can only be opened when the relevant
light has gone out.
23
Page 24
M
od. ..........
Prod. No. ...........
Ser. No. .........
P0042•N
Mod. ..........
Prod. No. ...........
Ser. No. .........
P1035UK
Water is not
visible in the machine. The machine,
which is the result of modern technology, runs
in a very economical way with low water
consumption. Performance is
nevertheless excellent.
ProblemPossible cause
The machine makes an unusual
noise. The machine is fitted with a commutator
motor which improves machine
performance.
• Spinning starts late or the
laundry is not spun enough:
• The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after few minutes, the
laundry is still not evenly distributed in the drum,
the machine will spin at a lower speed or not spin.
If at the end of the programme the laundry is not
spun enough, redistribute the load manually and
select the spin programme.
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
P1034UK
24
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.