AEG-Electrolux EW1066T User Manual
WASHING MACHINE
INSTRUCTION BOOK
EW 1066 T
146 1019 05 GB
CONTENTS
For the user
Safety instructions 4/5
Description of the appliance 6
Use of your appliance 7
Operating instructions 8/9
Programme chart 10/11
Hints & Tips 12-14
Cleaning and maintenance 15
If something doesn't work 16/17
Service 18
For the installer
Technical information 19
Installation
Unpacking 19
Installation 20
Levelling 20
Moving of the appliance 20
Water connection 21
Electrical connection 21
Guide to use the instruction
The following symbols will be found in the text to guid you
throughout the instructions :
Safety instructions
Hints and tips
Environmental information
3
SAFETY INSTRUCTIONS
You must read the whole of this instruction book
before you use the appliance. Follow the advice
carefully. Keep the book for future reference. If you
sell or give away the appliance, make sure that the
book is passed to the new owner.
The following warnings are provided in the interest
of overall safety. You must read them before the
appliance is installed or used.
Use
This appliance is designed to be used by
adults. Children should not be allowed to touch
the controls or play with the product.
It is dangerous to modify the specifications of
this appliance in any way.
Always unplug the appliance and turn off the
water after use.
Only wash fabrics with are designed to be
machine washed. If in doubt, follow the instructions you find on the label of the item itself.
Place small metal rings or edged plastic rings
in a net or bag.
Make sure that all pockets are empty. Hard,
sharp objects such as coins, safety pins, nails,
screws or stones can cause extensive damage.
Do not machine wash fabrics which are
saturated with petroleum products. If volatile
cleaning fluids have been used, make sure
that they are thoroughly removed from the
fabrics before they are placed in the appliance.
Small and delicate objects (e.g. baby socks,
stockings) can be easily washed inside a small
pillowcase with a zip fastener or in larger
socks.
Use only the recommended quantities of fabric
conditioner.
Before cleaning, care and maintenance, ensure
that the machine is unplugged.
Installation
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be cariied out by a qualified
plumber or competent person.
Make sure that the appliance does not stand
on its electrical supply cable.
This appliance is heavy. Care should be taken
when moving it.
All packaging and transit bolts must be removed
before the appliance is used. Serious damage
may occur if this is not done.
If your washing machine is in a room subject to
temperatures below freezing, the water must
be removed from the machine. So, the danger
of freezing should be expected.
Read all instructions before using
the appliance and save them for
future reference.
4
Safeties
Lid : your washing machine is equipped with
a safety avoiding the switching of the appliance
when the flapdoors of the drum are opened ;
the closure of the lid is so impossible. An
electromechanic safety prohibits the opening
of the lid when the washing machine works and
2 minutes after the end of the programme.
Washing motor : in case of mechanic
overloading, overvoltage, a thermic safety
protects automatically the motor.
Environmental information
All materials marked by the symbol are
biodegradable. They can be disposed of without
danger or burnt in rubbish incinerators.
In order to realize water and energy savings and to
act in an environmentally conscious manner, we
advice to follow the below instructions :
Use if possible the appliance with full loads
instead of partial loads. Take care to do not
overload the drum.
Heating : the heating can only begin when
the water quantity necessary for the washing
is in the tub. This safety is useful when there is
a water break-up or if you forget to open the
water inlet hose.
Anti-balanced system : This safety allows to
the appliance to keep a perfect stability during
the intermediary spinnings and during the final
spinning. If you notice that your laundry is not
spinned enough, the anti-balanced system has
then detected a bad distribution of the laundry
during the final spinning ; so it is adviced to
realize a new spinning taking care to unpack
handly the laundry before.
The anti-foam system: water consumption is
very low, due to the electronic spin cycle with
an intermediate spin after the main wash and
three rinse cycles for white and color programs.
The spin cycle remains under the control of the
foam detection system after the wash cycle
has finished. If necessary, the spin cycle will
stop until all foam is removed.
Use only the programmes with prewash for very
soiled laundry.
Savings on detergent and for the environment
may also be achieved if with medium to hard
water you add sufficient detergent for soft water
and then add separately a softener. This relieves
our waters of a certain amount of chemicals.
When disposing of the machine in a proper
manner, destroy the door lock and cut off the
power supply cord.
5
DESCRIPTION OF THE APPLIANCE
Programme selector
Spinning speed variator
Pushbuttons
Control lamp
Temperature selector
Control panel
Lid
Handle for
opening lid
Detergent dispenser
Symbols
) Washing powder for programmes with
(
pre-wash (1).
( ) Washing powder or liquid detergent for
the main wash (2).
(
) Bleach compartment (3).
(
) Liquid additives (fabric softener and
conditioner...) (4).
(5) Liquid detergent.
Lever for castors
Trap door for
lint filter
1
4
2
3
6
USE OF YOUR APPLIANCE
The control panel
Never turn the programme selector when the appliance is working.
700
600
500
300
EW 1066 T
12 734 6
1 ON/OFF pushbutton " "
Press the ON/OFF pushbutton, the programme
starts : the control lamp lights on.
2 Control lamp
The control lamp lights on when the appliance is
working (on/off pushbutton " " pressed). It lights
off when the cycle is finished (programme selector
on a stop position"I").
800
900
1000
G
F
D
C
B
5
Thus, you can choose the spinning speed suiting
best to the nature of your laundry and to the degree
of humidity wished at the end of the wash.
6 Programme selector
It enables to select the most adapted programme
to the nature and degrees of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each programme phase as it takes place.
3 Half load pushbutton " "
This pushbutton allows to wash small quantity of
linen not much soiled (2,0 kg) only on the cotton
programmes.
At the end of the programme, the appliance stops
automatically on a position "I" for all the programmes or on a position rinse hold "
pushbutton is selected.
J
H
40
30
K
L
M
N
A
P
50
60
70
80
90
" if the rinse hold
4 Rinse hold pushbutton " "
Press this button to leave the water in the drum
after the wash cycle is completed. This works on
all the washing programmes. The clothes are left
suspended in water after the final rinse to prevent
the formation of creases.
5 Spinning speed variator
It enables to select the spinning speed of your
washing machine from " " (draining) to 1000 rpm
for cotton programmes and from " " to 800 rpm
for synthetics programmes.
Never turn the programme selector anticlockwise.
7 Temperature selector
It enables to choose the mosta adapted temperature
between cold ( ) and 90°C.
Choose the temperature which corresponds to the
chosen programme, with the help of the indications or the programme table, according to the
fibers and the fastness of the colours.
7
OPERATING INSTRUCTIONS
Before using your washing machine for the first time, we recommend that you do a preliminary wash
with the machine empty, as a precaution to clean the drum, tank and the product box.
1. Pour a dose of detergent in the “washing” detergent dispenser
2. Select the program B "White 90°C".
3. Press the On/Off button " ".
1. Place the laundry in the drum
lift up the lid of the machine.
open the drum with your two hands by pressing
the button A and the two flapdoors till they
disengage.
introduce the laundry into the drum ; close the
drum and the lid of the machine.
Be careful : before closing the lid of your machine,
make sure that the drum flapdoors are correctly
closed :
the two flapdoors fastened,
the button A pressed out.
A
2. Measure out the detergent
Measure out the amount of detergent
recommended by the manufacturer in the main
wash compartment ( ).
If you wish to carry out a prewash, pour the amount
required into the prewash compartment ( ).
3. Add the bleach agent, if
required
You may use a bleach agent in all the washing
programmes. However, make sure that the fabric
withstands the treatment. Bleach is automatically
washed down into the drum. Pour 1/4 to 1 glass of
12° chl bleach into compartment marked (
before switching the machine on.
4. Add the fabric softener
Pour the softener, if required, into the compartment
marked (
Your washing machine has been conceived in
order to save water and detergent products.
Please take care the filling level of the detergent
products do not exceed the MAX marks located
near the display window of your detergent
dispenser.
). Do not exceed the MAX level.
Liquid detergent
only compartment
)
Powder detergent
Compartment
(prewash)
Compartment
(wash)
5. Press the half load pushbutton
" and/or the rinse hold
"
pushbutton "
8
" if required.
Loading...