Please read this instruction booklet before using the appliance
35687-5301
Model ESOPMSS
GB
Important Safety Information
You MUST read these warnings carefully before installing or using the oven. If you need
assistance, contact our Customer Care Department on 08705 950950
Installation
•It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.
•It is dangerous to alter the specification in any way.
•Once you have removed all packaging from the
appliance, ensure that it is not damaged and the
electric cable is in perfect condition. Otherwise, contact
your dealer before proceeding with the installation.
During use
•During use the appliance becomes hot. Care should be
taken to avoid touching heating elements inside the
oven.
•This appliance has been designed for cooking edible
foodstuff only and must not be used for any other
purposes.
•Ensure that all control knobs are in the OFF position
when not in use.
•Should you connect any electrical tool to a plug near
this cooking appliance, ensure that electric cables are
not in contact with it and keep them far enough from the
heated parts of this appliance.
•If the appliance is out of order, disconnect it from the
electric supply.
•Do not leave untensils containing foodstuffs, e. g. fat, oil
or any inflammable product in or on the appliance. This
could cause damage in case the appliance is
inadvertently switched on.
•Always place the dripping pan in position to collect fat
when using the grill or when cooking meat. Pour a little
water into the dripping pan to avoid smoke and
unpleasant smells.
•Always use oven gloves to remove pans from the oven.
•For hygiene and safety reasons, this appliance should
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
•Disconnect the appliance from the electrical supply,
before carrying out any cleaning or manteinance work.
•Some parts of the appliance are covered by a shockproof plastic film. Remove this film before using the
oven.
•Always stand back from the oven when opening
the oven door during cooking or at the end of it to
allow any build up of steam or heat to release.
•Never use steam or steam machines to clean the
appliance.
•We recommend that you supervise each step of the
pyrolytic cleaning cycle. A power failure could cause a
temperature increase of the surround or cabinet which
could result in a fire.
It is important that the oven door, the door gasket, the
oven light and the cavity are in good condition to avoid
a fire.
A build-up of fat or other foodstuff could generate white
smoke, irritating for your eyes and the respiratory
system. We recommend that you stop the cleaning
cycle using the ON/OFF button to cool down the oven
cavity. Do not disconnect the appliance from theelectric supply. When the oven has cooled down
remove the food residue with a wet sponge.
•The manufacturer disclaims any responsability
should all the safety measures not be carried out.
Child Safety
•This appliance has been designed to be operated by
adults and children under supervision. Young children
must not be allowed to tamper with the controls or
play near or with the oven.
•Accessible parts of this appliance may become hot
when it is in use. Children should be kept away until
it has cooled.
Service
•Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
Environmental Information
•After installation, please dispose of the packaging
with due regard to safety and the environment.
•When disposing of an old appliance, make it unusable,
by cutting off the cable. Remove any door catches,
to prevent small children being trapped inside.
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product.
For more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where you
purchased the product.
2
Contents
For the User
Important Safety Information2
Description of the Oven4
Control Panel5
Oven Features6
When the Oven is First Installed6
The On/Off Button7
Before the First Use of the Oven7
Using the Oven8
Cooking Functions9
Programming the Oven9
Safety and Energy Saving Functions11
Hints and Tips13
Cooking Tables15
Cleaning the Oven17
Pyrolitic Cleaning17
Replacing the Oven Light19
Cleaning the Oven Door20
Something not Working22
Service and Spare Parts23
Customer Care Department23
Guarantee Conditions24
For the Installer
Installation25
Technical Data25
Electrical Connection25
Building In26
It is most important that this instruction book
should be retained with the appliance for
future reference. Should the appliance be
sold or transferred, always ensure that the
book is left with the appliance in order that the
new owner can get to know the functions of
the appliance and the relevant warnings.
Guide to use the instructions
The following symbols will be found in the text to guide
you throughout the Instructions:
You can choose nine different functions by turning the
Oven Function Control Knob to the following symbols:
Fan cooking
Conventional cooking
Full Grill
Small Grill
Thermal Grilling
Pizza Function
Bottom heating element
Defrosting
Pyrolytic Cleaning Function
Oven Function Control Knob
Time/Temperature Control Knob
Time/Temperature Control knob
The time/temperature control knob allows you to
select the time (minute minder, cooking duration and
end of cooking time) and temperature by turning the
knob to or .
5
Oven features
All the oven functions are controlled by an electronic
programmer.
You can select any combination of cooking function,
cooking temperature and automatic timing.
In the event of a power failure, the programmer will
keep all the settings (time of day, programme
setting or programme in operation) for about 3
minutes. If power is not restored within 3 minutes,
all the settings will be cancelled. When the power
is restored, the numbers in the display will flash,
and the clock/timer has to be reset.
Cooling fan
The cooling fan operates during cooking. Air is expelled
through vents between the oven door and the control panel,
as shown in the diagram.
The cooling fan may run on after the oven is switched off
to keep the controls cool. This is quite normal.
The Safety Thermostat
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Service
Force Centre. Under no circumstances should you
attempt to repair the appliance yourself.
Air Circulation
The oven is supplied with an exclusive system which
produces a natural circulation of air and the constant
recycling of steam. This system makes it possible to
cook in a steamy environment and keep the dishes soft
inside and crusty outside. Moreover, the cooking time
and energy consumption are reduced to a minimum.
During cooking steam may be produced which can be
released when opening the oven door. This is absolutely
normal.
However, always stand back from the oven
when opening the oven door during cooking
or at the end of it to allow any build up of
steam or heat to release.
When the oven is first installed
When the oven is first connected to the electrical
supply, the display will automatically show 12:00 and
the
symbol
set the correct time of day.
To set the correct time of day :
1. Press time function button : the clock
2. If the arrow symbol does not flash anymore,
It is possible to set the time of day only when the
oven is off.
will flash. This means that you have to
symbol and the arrow symbol will flash
(Fig. 5). Set the correct time by turning the
Time/Temperature control knob to or .
Once you set the time, the clock symbol
and the arrow symbol will keep flashing for 5
seconds and then go off. This means that the
time setting has been stored in the programmer
memory.
press time function button two times.
Then, proceed as explained in point 1.
6
The On/Off Button
The oven must be off to carry out some special operation
(setting the time of day, setting the child lock).
In all other cases, the oven must be switched on before
setting any cooking function or programme.
When button is pressed, the symbol of the cooking
function selected with the oven control knob will come
on the display, and the oven light will switch on.
To switch off the oven, you can press button at any
time. Any cooking function or programme will stop, the
oven light will switch off and the time display will show
the time of day only.
Before the First Use of the Oven
Remove all packaging, both inside and outside
the oven, before using the oven.
The oven will work only if the time of day has
been set.
Before first use, the oven should be heated without
food.
During this time, an unpleasant odour may be
emitted. This is absolutely normal, and is
caused by residues of manufacturing.
1. Set the time of day with the electronic
programmer (see paragraph "To set the correct
time of day").
2. Switch on the oven by pressing button .
3. Turn the oven control knob to and select
the "Conventional Cooking" function. This
symbol
4. Set the temperature to 250°C by turning the
Time/Temperature control knob.
5. Allow the oven to run empty for approximately 45
minutes.
6. Open a window for ventilation.
7. This procedure should be repeated with the "Fan
Cooking" function and the "Full Grill"
function for approximately 5-10 minutes.
appears on the display.
Once this operation is carried out, let the oven
cool down, then clean the oven cavity with a
soft cloth soaked in warm water to which a little
mild washing-up liquid has been added.
Before cooking for the first time, carefully wash
the oven accessories.
To open the oven door, always hold the
handle in the centre.
7
Using the Oven
Shelf Positions
The oven shelves can be placed at different heights to
obtain better cooking results.
The levels are shown in Fig. 5.
Always cook with the oven door
closed.
•Always use oven gloves to remove and replace food
in the oven.
•Always ensure that you are using oven proof baking
trays, oven dishes, etc.
•Do not place baking trays, cake tins or aluminium foil
directly on the base of the oven. This could cause a
heat build-up which could affect the performance of the
oven and damage the oven enamel.
•Carefully supervise cooking with fat or oil, since
these types of foodstuff can result in a fire, if overheated. For the same reason, be careful when placing
or removing food in the oven, not to let any fat or oil fall
on the oven base. If this happens, carefully clean the
oven to avoid unpleasant smells or smoke.
How to select a Cooking
Function
1. Switch on the oven by pressing button .
2. Turn the oven control knob to select the required
cooking function. Each time a cooking function
is selected, the corresponding symbol comes
on the display and the cooking function number
appears to the left of the currently selected
cooking function.
3. If the pre-set temperature is not suitable,
turn the Time/Temperature control knob to
or to adjust the temperature in 5
degree steps.
As soon as the oven heats up, the thermometer
symbol rises slowly , indicating the degree to
which the oven is currently heated.
4
3
2
1
When the required temperature is reached, an
acoustic alarm will sound for a short time and the
thermometer symbol will light permanently.
How to change the temperature
At any time after a cooking is started, you can adjust
the temperature setting by turning the Time/Temperature
control knob to (decrease) or (increase).
The maximum temperature setting is 250°C (285°C only
with the "Conventional cooking" function).
8
Cooking Functions
Here follows the list of the available cooking functions.
The small symbol appears on the Oven Function Control
Knob, the large one appears on the programmer display
when the relevant function is set with the knob.
Fan cooking - This setting allows you to
1
2
3
roast or roast and bake simultaneously
using any shelf, without flavour transference.
Pre-set temperature: 175 °C.
Conventional cooking - The heat comes
from both the top and bottom element,
ensuring even heating inside the oven. Preset temperature: 200 °C. The maximum
setting temperature is 285 °C.
Full Grill - The full grill element will be on.
Recommended for large quantities. Pre-set
temperature: 250 °C.
Thermal Grilling - This function offers an
alternative method of cooking food items,
5
6
7
8
normally associated with conventional
grilling. The grill element and the oven fan
operate together, circulating hot air around
the food. Pre-set temperature: 180 °C.
Select a maximum temperature of 200 °C.
Pizza Oven - The bottom element provides
direct heat to the base of pizzas, quiches or
pies, while the fan ensures air is circulated
to cook the pizza toppings or pie fillings.
Pre-set temperature: 175 °C.
Bottom heating element - The heat comes
from the bottom of the oven only, to allow
you to finish your dishes. Pre-set
temperature: 250 °C.
Defrosting – The oven fan operates without
heat and circulates the air, at room
temperature, inside the oven. This function
is particularly suitable for defrosting delicate
food which could be damaged by heat, e.g.
cream filled gateaux, iced cakes, pastries,
bread and other yeast products.
4
Small Grill - can be used for grilling small
quantities. Pre-set temperature: 250 °C.
9
Pyrolytic cleaning - This function allows
you to clean thoroughly the oven cavity.
Programming the Oven
How to set the minute minder
1. Press time function button to select the Minute
Minder Function. The symbols and will flash
and the control panel will display 0.00.
2. Turn the Time/Temperature control knob to within
3 seconds to select the required time (up to 23 hours
59 minutes). The Minute Minder will wait 3 seconds
and then start running.
3. When the programmed time has elapsed, an acoustic
alarm will be heard.
The oven will NOT switch off if in use.
4. To switch off the acoustic alarm, press any button.
The control panel will display the time of day and the
Minute Minder symbol will go out.
The Minute Minder function can be used as well
when the oven is off.
To use or to change the Minute Minder setting
Select the Minute Minder function and turn the
Time/Temperature control knob to or to change
the Minute Minder setting.
To cancel the Minute Minder:
Select the Minute Minder function and turn the
Time/temperature control knob to to decrease the
time until the display will show 0.00.
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.