INFO
INSTRUCCIONES PARA LA INSTALACION Y EL USO
INSTALLATION AND INSTRUCTION MANUAL
FRIGORIFICO-CONGELADOR ER 3121 D
FRIDGE-FREEZER ER 3121 D
2222 026-42
9
CONTENTS
Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 10
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11
Rear spacers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11
Power connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11
Cleaning the appliance’s interior . . . . . . . . . . . . . . . . . . . . . . . . .page 11
Door reversibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 12
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 13
Operation - Temperature regulation . . . . . . . . . . . . . . . . . . . . . . . .page 13
Freezing of fresh foods and storing of frozen foods. . . . . . . . . . . . . . . . . . .page 13
Refrigeration of foods. . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 13
Positioning the door shelves . . . . . . . . . . . . . . . . . . . . . . . . . .page 14
Defrosting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 14
Ice cube trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 14
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15
Replacing the interior light bulb . . . . . . . . . . . . . . . . . . . . . . . . .page 15
Servicing and Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . .page 15
10
WARNINGS
It is most important that this instruction book
should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that
the book is supplied with the appliance in order
that the new owner can be acquainted with the
functioning of the appliance and the relevant
warnings.
These warnings are provided in the interest of
safety. You must read them carefully before
installing or using the appliance.
ª This appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the appliance.
ª Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
ª This appliance should be serviced by an authorized
Service Centre, and only genuine spare parts
should be used.
ª It is dangerous to alter the specifications or modify
this appliance in any way.
ª Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
ª The domestic refrigerators and freezers are designed
to be used specifically for the storage of edible foodstuffs only.
ª The inner lining of the appliance consists of chan-
nels through which the refrigerant passes. If these
should be punctured this would damage the appliance beyond repair and cause food loss. DO NOT
USE SHARP INSTRUMENTS to scrape off frost or
ice. Frost may be removed by using the scraper
provided. Under no circumstances should solid ice
be forced off the liner. Solid ice should be allowed
to thaw when defrosting the appliance. See defrost
instructions.
ª Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in damage
to the appliance.
ª This appliance is heavy. Care should be taken when
moving it.
ª Ice lollies can cause frost bur ns if consumed
straight from the appliance.
ª Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out by
inexperienced persons may cause injury or more
serious malfunctioning. Refer to your local Service
Centre, and always insist on genuine spare parts.
ª This appliance does not contain gasses which
could damage the ozone layer, in either its refrigerant circuit or insulation materials; it must nevertheless be disposed off in a proper manner, in
accordance with regulations for protection of the
environment.
ª Frozen food must not be re-frozen once it has been
thawed out.
ª Manufacturers’ storage recommendations should
be strictly adhered to. Refer to r elevant instructions.
ª There are working parts in this appliance which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
ª Parts which heat up should not be exposed. Wher-
ever possible the back of the appliance should be
against a wall.
ª Before any cleaning or maintenance work is carried
out, be sure to switch off and unplug the appliance.
ª If the appliance is transported horizontally, it is
possible that the oil contained in the compressor
flows in the refrigerant circuit. It is advisable to wait
at least two hours before connecting the appliance
to allow the oil to flow back in the compressor.
11
INSTALLATION
D042
100 mm min.
A
B
D039
A
45°
If this appliance featuring magnetic door seals is
to replace an older appliance having a spring lock
on the door or lid, be sure to make that spring lock
unusable before you discard the old appliance.
This will prevent it from becoming a death-trap for
a child.
Location
Place the appliance as far away as possible from
sources of heat, e.g. radiators, heaters, direct sunlight, etc. The best results are achieved with a room
temperature ranging from +18°C to +43°C (class T) or
from +18°C to +38°C (class ST). The class of your appliance is shown on its rating plate.
Make sure that there is nothing at the back, at the top
and at the bottom of the appliance to obstruct air circulation.
For a more efficient operation of the appliance the
minimum distance between the top of the appliance
and other overhanging kitchen furniture, if any, should
be at least 100 mm (Fig. 1-A).
The best solution is shown in Fig. 1-B (without overhanging kitchen furniture).
One or more adjustable feet mounted on the base of
the appliance make it possible to set it perfectly level.
Fig. 1
Rear spacers
In the plastic envelope containing the Operation Instructions are also included two wall spacers to be fitted into the special openings provided on the back of
the appliance.
Push-fit the spacers into the openings, making sure
that arrow (A) is positioned as per Fig. 2 and then turn
the spacers through 45° until they lock in (arrow in
vertical position).
Fig. 2
Power connection
Before plugging the appliance into the mains socket,
check that the voltage and frequency indicated on the
appliance’s rating plate are the same as those provided by your home power supply.
A 6% fluctuation above or below rated voltage is acceptable.
For operation using different voltages you should use
an autotransformer of suitable capacity.
The appliance’s plug and the wall socket are fully
compatible, without any need to use adaptors, multiple plugs, etc. If this is not the case, the wall socket
should be replaced to make it compatible.
The appliance MUST be connected to an efficient
earth or ground tap.
The supply lead plug in fact incorporates a special
earth or ground contact for this purpose. If by any
chance the sockets of your domestic wiring system
are not earthed, the appliance must be connected to a
separate earth or ground wire by a qualified electrician, in accordance with existing safety regulations.
The manufacturer declines to accept any liability if
this accident-prevention procedure is not followed.
This appliance complies with E.E.C. directive no. 87/
308 of 2.6.87 relative to radio interference suppression.
This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
Cleaning the appliance’s interior
Before using the appliance for the first time, wash all
internal parts with lukewarm water and neutral soap
so as to remove the typical «new» smell and then drv
thoroughly.
Do not use detergents or abrasive powders as these
will damage the finish.
12
Door reversibility
Unplug the appliance before carrying out any operation.
Remove the ventilation grid (2); to do this, loose the
frontal screws and pull it downward sliding it from the
central stop runners;
remove the lower hinge (1);
remove the pin (C) from the opening (A) and refit it in
the opening (B);
remove the door stop hinge (D) and refit it on the op-
posite side;
slide the lower door out of the centre hinge;
remove the centre hinge (4) and the upper hinge (3)
and refit them on the opposite side;
refit the lower door and hinge (1) on the opposite side;
refit the ventilation grid upside-down;
take off the handle covers (Fig. 4), remove handles
and refit them on the opposite side.
Fig. 3
Fig. 4
D158
5
6
3
4
D
C
A
1
B
2
B0646
13
USE
D040
Operation - Temperature regulation
Insert the plug into the wall socket. Open the refrigerator door and turn the thermostat knob, to be found
on the upper right side of the inner liner, clockwise,
beyond the «O» position (STOP), to start the appliance.
Temperature adjustment is obtained by turning the
thermostat knob to the required setting. A medium
setting is generally the most suitable.
However, the exact setting should be chosen keeping
in mind that the temperature inside the refrigerator depends on a number of factors, such as:
room temperature, how often the doors are opened,
the quantity of food stored in the refrigerator and the
location of the appliance.
Turn the knob to higher settings to obtain a lower refrigeration temperature or to lower settings to increase
the refrigeration temperature.
Freezing of fresh foods and storing of frozen foods
The four-star compartment is suitable for
long term storage of commercially frozen food and for
freezing fresh food.
Do not store products for longer than the time specified by the food manufacturer.
Under normal circumstances, to freeze fresh foods it
is not necessary to change the setting of the thermostat knob with respect to the normal running position.
However, for a quick freezing operation, turn the thermostat knob to the coldest setting; but remember
that, in this condition, the refrigerating compartment
temperature might drop below 0°C. If this occurs reset
the thermostat knob to a warmer setting.
To help you get the best out of the freezing process,
here are a few hints:
Store the foods to be frozen on the grid in the freezing
compartment.
The maximum amount of food which is freezable in
24 hours is shown also on the rating plate.
Split foods into small portions to speed up freezing
and to avoid having to thaw more food than you require.
Wrap the foods in foil or polythene film, ensuring that
the wrapping adheres closely to the food and is well
sealed.
It is advisable to keep tab of the freezing times by indicating the date of freezing on each package.
On the inner freezer door you will find schematic
drawings of foods and animals indicating maximum
storage time (in months) possible from the time of
freezing.
The foods for freezing should not be placed in contact
with already frozen foods. This will avoid the temperature of already frozen foods from rising.
Important
Never put fizzy drinks in the freezer as they might well
burst.
Ice lollies should not be eaten straight out of the freezer as they might cause cold burns.
Remember that, once thawed, frozen food deteriorates rapidly.
If there is a power failure when food is in the freezer,
do not open the door of the freezing compartment.
The frozen food will not be affected if the power cut is
of short duration (an increase in temperature of the
frozen food may shorten the period of their safe storage), otherwise it is recommended that the food
should be used within a very short time.
Refrigeration of foods
To achieve the best results with the refrigerator compartment, you should follow one or two very simple
rules:
Do not put warm foods or evaporating liquids in the
refrigerator.
Cover or wrap foods (particularly if they have a strong
smell or contain aromatic herbs).
Do not cover the shelves (grids) with paper or plastic
since this blocks circulation of air in the compartment.
For a correct use of the compartment we suggest:
Raw meat: wrap in polythene bags and place on top
of the salad crisper. Only store in this way for one or
two days at most.
Fruit & Vegetables: these should be washed and
placed in the bottom salad crisper.
Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap; store them in
the bottle rack on the door.
The inside walls of the refrigerator are equipped with a
series of runners so that the shelves (grids) can be positioned as desired (Fig. 5).
Fig. 5
14
Positioning the door shelves
To permit storage of food packages of various sizes,
the door shelves can be adjusted in height.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the arrows
until it comes free, then reposition as required.
Fig. 6
Defrosting
Frost is automatically eliminated from the evaporator
of the refrigerator compartment every time the motor
compressor stops, during normal use. The defrost water drains out through a trough (Fig. 7) into a special
container on the back of the appliance where it evaporates.
We particularly recommend that you periodically
clean the defrost-water drainage outlet, located in
the centre of the drainage groove in the refrigerator compartment (Fig. 7). Use the special cleaner
provided, which you will find already inserted into
the discharge hole.
Fig. 7
The freezer compartment, however, will become progressively covered with frost. This should be removed
with the special plastic scraper provided, whenever
the thickness of the frost exceeds 4 mm.
During this operation it is not necessary to switch off
the power or to remove the foods from the compartment.
If a thick layer of ice is formed it will be necessary to
carry out complete defrosting.
D434
D037
D016
It is advisable to carry out this operation when the appliance is empty.
To carry out complete defrosting of the freezer compartment proceed as follows:
remove the frozen foods and wrap them in several
sheets of newspaper and then keep them in a cool
place;
set the thermostat knob to «O» or unplug the appliance from the mains socket;
leave the door open.
To collect the defrost water place a basin on the first
shelf of the refrigerator compartment underneath the
drainage hole and lift the plug (Fig. 8); after complete
defrosting dry thoroughly the refrigerator compartment an refit the plug.
Fig. 8
Reconnect the appliance to the power supply or turn
the thermostat knob to the desired setting. After two
or three hours the appliance will be ready for the storage of frozen food.
Important:
Remember that an increase of the surface temperature of already-frozen foods may significantly decrease the duration of their conservation.
Never use metal objects to scrape away the accumulated frost since you may damage the cooling circuit.
Ice cube trays
The refrigerator is provided with two ice cube trays.
These trays should be filled with drinking water and
then placed in the freezer compartment.
Do not use metal tools to remove the trays when they
are stuck-frozen inside the compartment.
3
D025
If the appliance is not working
If the appliance is not functioning properly check that:
the plug is firmly inserted in the wall socket and the
mains power switch is on;
there is no power failure;
the thermostat knob is in the right position.
Furthermore:
if the appliance seems too noisy check that the sides
are not touching furniture that can transmit or amplify
a noise or a vibration. Also, check that the refrigerant
unit does not vibrate.
If there is water on the fridge bottom, make sure the
defrost water discharge hole is not clogged (Fig. 7).
If your appliance is still not working properly after
making the above checks, contact your local dealer or
the nearest service center.
To obtain fast service, it is essential that when you apply for it you specify the model and serial number of
your appliance which can be found on the warranty
certificate or on the rating plate.
15
MAINTENANCE
Unplug the appliance before carrying out any
maintenance operation.
Wash the interior with lukewarm water and sodium bicarbonate, and the cabinet exterior with a silicone
wax spray; clean the condenser and the motor compressor with a brush or a vacuum cleaner.
During periods when the appliance is not used, you
should take the following precautions:
remove the plug from the wall socket;
remove all food from the appliance;
defrost and clean the interior and all accessories;
leave the door slightly open, thus letting air circulate
and preventing the formation of unpleasant smells.
It is important to clean the defrost water discharge
hole periodically (Fig. 7).
Replacing the interior light bulb
The light inside the refrigerator compartment is easy
to get at through the opening in the light holder.
If the light does not go on when the door is open,
check that it is screwed into place properly.
If it still does not light up, change the bulb.
The rating is shown on the light bulb cover.
Fig. 9
SERVICING AND SPARE PARTS
Loading...