AEG-Electrolux EON6701FXP User Manual

English
Warnings - Built-under ovens
It is most important that the instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. These warnings are provided in the interest of safety. You must read them carefully before installing or using the appliance.
Installation
Any installation work must be undertaken
by a qualified electrician or competent person.
Installation and initial adjustment of your
oven MUST be carried out by qualified personnel in compliance with current regulations. Specific installation instructions for the installer are given in this booklet.
During use
This appliance has been designed for
cooking edible foodstuffs only, and must not be used for any other purposes.
Always stand back from the oven when
opening the oven door during cooking or at the end of it to allow any build up of steam or heat to release.
It is dangerous to alter the specifications
or modify the product in any way.
Appliances become very hot with use, and
retain their heat for a long period after use. Care should be taken to avoid touching heating elements inside the oven.
Always ensure that the control knobs are
in the “off” position when not in use.
Using a gas cooking appliance will produ-
ce heat and moisture in the room which it has been installed in. Ensure a continuous air supply, keeping the air vents in good conditions or installing a cooker hood with discharge tube.
In case of intensive or long time use of the
appliance, make the ventilation more efficient, by opening a window or increasing the electric exhaust fan power.
For hygiene and safety reasons, this
appliance should be kept clean at all times. A build-up of fats or foodstuffs could result in a fire.
Never line any part of the oven with
aluminium foil.
Never use steam or steam machines to
clean the appliance.
Before any maintenance or cleaning work
is carried out on the appliance, always turn off the isolator switch at the cooker point, and allow to cool.
Ensure that the shelves are put in place in
the correct way.
This oven (even if it is linked to an electrical
cooking table) is made to function at 230 V monophase with neutral.
Child safety
This appliance is designed to be operated
by adults. Children should not be allowed to tamper with the controls or play with the product.
Children should be supervised at all times
and should not be allowed to touch the hot surfaces or be in the vicinity when in use or until the appliance has cooled after use.
During oven cooking and grilling, the
appliance door and the surrounding parts are warmed up to a very high temperature. Be careful and keep children away from the appliance while you are using it. When you connect other appliances to a plug near the oven, check carefully that the wire does not touch warm parts of the oven and does not get taken in the oven door.
31
Technical assistance
This appliance should be serviced by an
authorized Network Service Centre, and only genuine spare parts should be used.
Under no circumstances should you
attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
Guide to Use the instructions
Safety Instructions
The symbol on the product or on its
packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Step by step instructions for an
operation
Hints and Tips
MANUFACTURER:
ELECTROLUX HOME PRODUCTS ITALY S.p.A. Viale Bologna, 298 47100 FORLÌ (Italy)
When the oven is first installed
The oven will work only if the time of day has been set (please read the relevant instructions).
Once the oven has been installed:
a) set the thermostat knob to “MAX”; b) switch the oven function control knob to
conventional cooking ( );
c) allow the oven to run empty for
approximately 45 minutes; d) open a window for ventilation. During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing. Repeat this operation for the grill and fan cooking function. Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm soapy water.
32
Fig. 1
To open the oven door, always catch the handle in its central part.
Before cooking for the first time, carefully wash the oven accessories.
Description of the appliance
823459
7
1
610
11
12
13
14
1. Control panel
2. Control knob for right rear burner
3. Control knob for right front burner
4. Control knob for left front burner
5. Control knob for left rear burner
6. Oven Thermostat control knob
7. Oven Function control knob
8. Operating control light
9. Oven thermostat control light
10. Electronic programmer
11. Grill
12. Oven lamp
13. Oven Fan
14. Rating plate
33
Gas Hob
Hob Burner Control Knobs
The hob burners control knobs are situated on the front panel (Fig. 2). The symbols on the knobs mean that :
there is no gas supply there is maximum gas supply
there is minimum gas supply
Lighting the Burners
For easier lighting, proceed before
putting a pan on the pan support.
Push in the relevant knob and turn it
anticlockwise to "maximum position". After lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig. 3, lett. D) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted.
Then, check the flame is regular and
adjust it as required. If you cannot light the flame even after several attempts, check the "cap" and "crown" (Fig. 3, lett. A-B) is in the correct position. To put the flame out, turn the knob to the symbol "".
Fig. 2
Fig. 3
FO 0204
A - Burner cap B - Burner crown C - Ignition candle D - Thermocouple
Always turn the flame down or put it
out before taking the pans off the
burner.
34
Using the hob correctly
To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (see table).
Burner
Rapid Burner 180 mm 260 mm Semirapid B. 120 mm 220 mm Auxiliary B. 80 mm 160 mm
It is also advisable, as soon as a liquid starts boiling, to turn down the flame so that it will barely keep the liquid simmering.
Use only pans or pots with flat bottom.
Carefully supervise cookings with fats or oil, since these types of foodstuff
can result in a fire, if over-heated.
Minimum Maximum diameter diameter
35
Electric oven
Oven Function (Fig. 4) and Thermostat (Fig. 5) control knobs
They enable to select the most appropriate type of heating for the different cooking requirements by appropriately connecting the heating elements and adjusting temperature to the required level.
0 The oven is OFF.
Oven Light - The oven light will be on without any cooking function
Conventional cooking - The heat comes from both the top and bottom
element, ensuring even heating inside the oven.
Top heating element - The heat comes from the top of the oven only.
Bottom heating element - The heat comes from the bottom of the oven
only.
Fig. 4
Inner grill element only - can be used for grilling small quantities.
Double Grill - The full grill element will be on.
Fan cooking - This allows you to roast or roast and bake simoultaneously
using any shelf, without flavour transference.
Defrost Setting - This setting is intended to assist in thawing of frozen
food.
36
Fig. 5
Operating control light
It indicates that one or more of the heating elements are turned on.
Oven thermostat control light
This light goes off when the oven heats up to the temperature set and comes on again every time the thermostat cuts in to stabilize temperature.
Safety thermostat
In order to avoid excessive overheating due to incorrect use of the appliance or else to a faulty component, the oven is equipped with a safety thermostat which cuts off the power supply if necessary. Operation is restored automatically when the oven temperature decreases to normal values. Therefore, if the thermostat cuts in because you have not been using the appliance correctly, the oven can be used again simply by waiting for the appliance to cool down. If, instead, the thermostat cuts in because of a faulty component, you should call the Service Department.
37
Electronic programmer
4
5 6
123
The oven will work only if the time of day has been set. Moreover, the oven can also be operated
without any programme.
1. Push button for selecting a function
2. Decreasing control button “ ”
7
3. Increasing control button “ ”
8
4. Display
5. “Cooking Duration” pilot lamp
6. “End of cooking” pilot lamp
7. “Minute minder” pilot lamp
8. “Time of day” pilot lamp
Setting the time of day
When the power supply is switched on, or after a power failure, the “Time of day” pilot lamp will flash on the display.
To set the correct time of day:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5 seconds: the
“Time of day” pilot lamp will go out and the display will show the set time. The appliance is ready for use.
To reset the correct time of day:
1. press button repeatedly to select the “Time of day”
function. The relevant pilot lamp will start flashing. Then proceed as described above. The time of day may be reset only if no automatic function (cook duration or end of cooking ) has been set.
“Cooking Duration” function
Thanks to this function, the oven will automatically switch off at the end of a programmed cooking duration time. Place food in the oven, select a cooking function and adjust the cooking temperature. Press button repeatedly to select the “Cooking Duration” function. The relevant pilot
38
lamp will start flashing. Then, proceed as follows:
To set the duration time:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5 seconds:
the "Cooking Duration" pilot lamp will come on and the display will revert to the time of day.
3. When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, while the pilot lamp will start flashing. Turn the oven function and the thermostat control knob to zero. To switch off the acoustic alarm, press any button. NOTE: when doing this operation, the oven will be operated again, therefore, remember to turn the oven function and the thermostat control knob to zero at the end of the cooking time.
To cancel the duration time:
1. Press button repeatedly to select the “Cooking
Duration” function. The relevant pilot lamp will flash and the display will show the remaining cooking time.
2. Press button “ ” until the display shows “0:00”. After 5 seconds the pilot lamp will go out and the display will revert to the time of day.
“End of cooking” function
Thanks to this function, you can set the oven to switch off automatically when a programmed end of cooking time is over. Place food in the oven, select a cooking function and adjust the cooking temperature. Press button repeatedly to select the “End of cooking” function. The relevant pilot lamp will start flashing. Then, proceed as follows:
To set the End of cooking time:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5 seconds:
the “End of cooking” pilot lamp will come on and the display will revert to the time of day.
3. When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, while the pilot lamp will start flashing. Turn the oven function and the thermostat control knob to zero. To switch off the acoustic alarm, press any button. NOTE: when doing this operation, the oven will be operated again, therefore, remember to turn the oven function and the thermostat control knob to zero when cooking is over.
39
Loading...
+ 21 hidden pages