AEG-Electrolux EOB6790X, EOB6790X-X User Manual

Electric built-in oven
INSTRINSTR
INSTR
INSTRINSTR
UCTION BOOKLETUCTION BOOKLET
UCTION BOOKLET
UCTION BOOKLETUCTION BOOKLET
35690-4602
Model EOB 6790
AU
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings. These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
Installation
This oven is heavy and care must be taken when moving it.
Ensure that all packaging, both inside and outside the oven, has been removed before the oven is used.
The oven must be installed according to the instructions supplied. Any electrical work must be undertaken by a qualified electrician.
It is dangerous to alter the specifications in any way.
After installation, please dispose of the packaging with due regard to safety and the environment.
Child Safety
The appliance is not intended for use by young children or infirm persons without supervision. Young children must not be allowed to tamper with the controls or play near or with the oven.
Ovens become very hot, and retain their heat for a long period of time after use. Children should be kept well away from the oven until it has cooled.
CAUTION - accessible parts will become hot when in use. To avoid burns and scalds children should be
kept away.
During Operation
This oven has been designed for cooking edible foodstuffs only and must not be used any other purposes.
Appliances become very hot with use, and retain their heat for long periods after use. Care should be taken to avoid touching heating elements inside the oven.
Do not use this oven if it is in contact with water and never operate it with wet hands.
Ensure that the oven shelves are installed in the correct way.
Take great care when heating fats and oils as they will ignite if they become too hot.
Never place plastic or any other material which may melt in or on the oven.
Only clean this oven in accordance with the instructions.
Take care to follow the recommendations given for tending the food when grilling.
Always grill with the oven door closed.
Always use oven gloves to remove and replace food in the oven.
Ensure that you support the grill pan when removing it from the oven.
Never line any part of the oven with aluminium foil.
Do not allow heatproof cooking material, e.g. roasting bags, to come into contact with oven elements.
Always stand back from the oven when opening the
oven door, to allow any build-up of steam or heat to release.
Stand clear when opening the drop down oven door.
Do not allow it to fall open - support it using the door
handle, until it is fully open.
Do not place sealed cans or aerosols inside the oven.
They may explode if they are heated.
Do not hang towels or clothes from the oven or its handle. They are a safety hazard.
After Use
Ensure that the electronic programmer is in the OFF position when not in use.
For hygiene and safety reasons, this oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan.
Only clean this oven in accordance with the instructions.
Never use steam or high pressure steam cleaners to clean the appliance.
Always allow the oven to cool down before switching off at the wall prior to carrying out any cleaning or maintenance work.
Do not leave utensils containing foodstuffs, e.g. fat or oil in or on the oven in case it is inadvertently switched ON.
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
Environmental Information
After installation, please dispose of the packaging with due regard to safety and the environment.
When disposing of an old appliance, make it unusable, by cutting off the cable. Remove any door catches, to prevent small children being trapped inside.
The symbol on the product or on its packaging indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential ne­gative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Contents
For the User For the Installer
Important Safety Information 2
Description of the Oven 4
The Oven Electronic Control 5
When the Oven is First Installed 6
Before the First use of the Oven 7
Cooking Functions 9
Programming the Oven 9
Safety and Energy Saving Functions 11
The "Recipe Selection" Function 13
Using the Oven 14
Hints and Tips 15
The Conventional Oven 16
The Fan Oven 17
Cooking Chart-Conventional and Fan Oven 18
Grilling 19
Cooking Chart-Grilling 20
Installation 27
Technical Data 27
Electrical Connection 28
Building In 29
Pizza Oven 21
Defrosting 21
Cleaning the Oven 22
Something not Working 26
Guide to use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
!
Hints and Tips
Environmental information
This appliance complies with the following E.E.C.
Directives: *73/23 - 90/683 (Low VoltageDirective); *93/68 (General Directives); *89/336 (Electromagnetical Compatibility Directive)
and subsequent modifications.
Your safety is of paramount importance. Therefore, if you are unsure about any of the meanings of these WARNINGS, contact the Customer Care Department.
Description of the Oven
Contro Panel
Rating Plate
Oven Electronic Control
Air Vents for Cooling Fan
Grill Element
Oven Light
Oven Fan
Oven accessories
Grill/roasting
pan
Grill trivet
Anti-tip shelf
Baking tray (x 2)
The Oven Electronic Control
Cooking Duration
Symbol
Minute Minder
Symbol
Cooking Functions
display
1234567
General Features of The Oven Electronic Control
All the oven functions are controlled by an electronic device. You can select any combination of cooking function, cooking temperature and automatic timing.
Time
display
Temperature
display
End Of Cooking Time
Symbol
Clock Symbol
Thermometer Symbol
The Oven Electronic Control Buttons
1. ON / OFF Button
2. Cooking Functions Button
The Oven Electronic Control
3. Recipe Selection Button
Display
The display has two sections. The upper section has a grey background and black symbols and digits. It gives information about the time (the current time of day, the programmed cooking duration, the programmed end of cooking time, etc.), and shows the name of the selected cooking function or recipe. The lower section has a black background and red symbols and digits. It gives information about the selected cooking function, the selected temperature and the current temperature inside the oven.
4. Fast Heat Up Function Button
5. Decreasing Control Button (Time or Temperature)
6. Increasing Control Button (Time or Temperature)
7. Time Function Button
In the event of a power failure, the programmer will keep all the settings (time of day, programme setting or programme in operation) for about 3 minutes. If power is not restored within 3 minutes, all the settings will be cancelled. When the power is restored, you will have to re-set the programmer.
The Oven Safety Devices
The Safety Thermostat
This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequential over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Service Force Centre. Under no circumstances should you attempt to repair the appliance yourself.
The cooling fan
The cooling fan operates during cooking. Air is expelled through vents between the oven door and the control panel, as shown in the diagram (page 4). The cooling fan may run on after the oven is switched off to keep the controls cool. This is absolutely normal.
When the Oven is First Installed
When the oven is first connected to the electrical supply, or when supply is restored after a long power failure, the upper section of the display shows this message:
"WELCOME TO * KRONOS-3 * BASIC -2 * DANSK * DEUTSCH * ENGLISH * ESPANOL * FRANCAIS * ЕЛЛЗНЙКБ * ITALIANO * NEDERLANDS * NORSK * PORTUGUES * SVENSKA * РУССКИЙ"
This message lists all the languages which can be chosen to operate with the Oven Electronic Control (Fig. 1).
Symbol flashing near the "Clock Symbol" means that you need to set the current time of day before using the oven.
Fig. 1
!
To set the Correct Time of Day
1. Press the "Time Function Button" . While symbol flashes near the "Clock Symbol" , set the
current time of day pressing buttons or (Fig.
2). Once you have set the time, the symbol keeps flashing for 5 seconds and then disappears. This means that the setting has been stored in the Electronic Control memory.
2. If symbol stops flashing before you have had time
to set the clock, press the "Time Function Button"
twice. The symbol starts flashing again.
Then, proceed as described at point 1.
!
To Select the Language
You can choose the language to be used in the Oven Electronic Control display. The oven must be OFF when carrying out this operation.
1. Press the "Cooking Function Button" and the
"Recipe Selection Button" at the same time and keep them pressed for 2 seconds at least. The
Electronic Control beeps once and the display shows the current language selection. (Fig. 3).
Fig. 2
2. Within 5 seconds, press button to select your
language (Fig. 4).
3. Once you selected your language, you have 5 seconds
to confirm your selection by pressing the "Cooking
Function Button" and the "Recipe Selection Button"
at the same time and keeping them pressed for 2
seconds at least.
Please note that anytime you carry out a step of this procedure, you have 5 seconds to carry out the following step. If you wait more than 5 seconds the Electronic Control switches off and the selection is not stored in its memory.
Here follows the list of available languages: Danish (DANSK), German (DEUTSCH), English (ENGLISH), Spanish (ESPANOL), French (FRANCAIS), Greek (ЕЛЛЗНЙКБ), Italian (ITALIANO), Dutch (NEDERLANDS), Norwegian (NORSK), Portuguese (PORTUGUES), Swedish (SVENSKA) and Russian (РУССКИЙ).
Fig. 3
Fig. 4
Before the First use of the Oven
Remove all packaging, both inside and outside the oven, before using it.
The oven will work only if the time of day has been set.
To switch the oven on and off
!
The oven must be switched on before setting any cooking
function or programme. When button is pressed, the oven light will switch on. The oven symbol and the
message "LIGHT" appear on the display (Fig. 5).
To switch off the oven, you can press button at any time. Any cooking function or programme will stop, the
oven light will switch off and the time display will show the time of day only.
Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing. Ensure the room is well ventilated.
Fig. 5
1. Set the time of day with the electronic programmer (see paragraph "To set the correct time of day").
2. Press the "On/Off" button to switch on the oven.
3. Press the "Cooking Functions" button twice and
select the "Conventional Cooking" function (Fig.
6).
4. Set the temperature to 250°C using button (Fig.
7).
5. Allow the oven to run empty for approximately 45 minutes.
6. Open a window for ventilation.
This procedure should be repeated with the "Fan
Cooking" function and the "Double Grill" function for approximately 5-10 minutes.
Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm water to which a little mild washing-up liquid has been added.
Before cooking for the first time, carefully wash the oven accessories.
Fig. 6
Fig. 7
!
To select a cooking function
1. Switch on the oven by pressing the
"On/Off"
button .
2. Press the "Cooking Functions" button
the required oven function. Each time button pressed, a different cooking symbol appears in the
lower section of the display and the description of the cooking function appears as a message in the upper section. The pre-set temperature for each function is shown in the lower section, and symbol """ flashes on the right hand (Fig. 8).
3. Symbol "" " flashing means that it is possible to
adjust the pre-set temperature by pressing button
or
(Fig. 9).
degree steps. Please note that symbol """ will flash for 5 seconds.
4. When 5 seconds elapse, symbol """ will disappear
showing that the temperature level has been stored in the Electronic Control memory. The thermometer
symbol rises slowly #, indicating the degree to
which the oven is currently heated.
5. When the required temperature is reached, an acoustic alarm will sound for a short time and the
thermometer symbol will light permanently.
Temperature level is adjusted in 5
to select
is
Fig. 8
!
To set the temperature and time
Buttons and “ “ are used to adjust both the temperature and the time settings. Details about using
them according to the different functions of the Oven Electronic Control are given in the following chapters.
As a general rule, please note that:
> Buttons and are used to increase or decrease
the temperature settings while symbol """ flashes on the right hand of the temperature display. When you choose a cooking function, symbol """ keeps flashing for 5 seconds only. This is the useful interval
to press buttons or and select your temperature setting. Once these 5 seconds elapse, symbol """
disappears and the thermometer symbol # comes
on: this means that the current selection has been stored in the Oven Electronic Control memory and that the oven is currently heating up.
> Buttons and are used to increase or
decrease the time settings while the symbol is flashing near the "Clock" symbol , the "Minute Minder" symbol , the "Cooking Duration"
symbol or the "End Of Cooking Time" symbol . When you choose a time function, symbol keeps
flashing for 5 seconds only. This is the useful interval
to press buttons or and select your time setting. Once these 5 seconds elapse, symbol
stops flashing: this means that the current selection has been stored in the Oven Electronic Control memory.
Fig. 9
Cooking Functions
The following list displays in sequence all the available cooking functions.
FAN COOKING – This setting allows you to
roast or roast and bake simultaneously using any shelf, without flavour transference. Pre-set temperature: 175°C.
CONVENTIONAL COOKING –The heat comes from both the top and bottom element, ensuring even heating inside the oven. Pre-set temperature: 200°C.
GRILL – It can be used for grilling small quantities. Pre-set temperature: 250°C.
THERMAL GRILLING – This function offers an alternative method of cooking food items, normally associated with conventional grilling. The grill element and the oven fan operate together, circulating hot air around the food. Pre-set temperature: 180°C.
Select a maximum temperature of 200°C.
PIZZA – The bottom element provides direct
heat to the base of pizzas, quiches or pies, while the fan ensures air is circulated to cook the pizza toppings or pie fillings.
Pre-set temperature: 175°C. DOUBLE GRILL - The full grill element will be
on. Recommended for large quantities. Pre-set temperature: 250°C.
BOTTOM - The heat comes from the bottom of the oven only, to allow you to finish your dishes. Pre-set temperature: 250°C.
TOP – The heat comes from the top of the oven only, to allow to you finish your dishes. Pre-set temperature: 250°C.
DEFROST
heat and circulates the air, at room temperature, inside the oven. This function is particularly suitable for defrosting delicate food which could be damaged by heat, e.g. cream filled gateaux, iced cakes, pastries, bread and other yeast products.
– The oven fan operates without
Programming the Oven
How to set the minute minder
!
1. Press the "Time Function" button . The symbol
flashes near the "Minute Minder" symbol and the time display shows "0.00" (Fig. 10).
2. Symbol will flash for 5 seconds. Within this time,
press button to select the required time (Fig. 11). Maximum time is 23 hours 59 minutes. After another
5 seconds after you have set the time, the symbol stops flashing. This means that the setting has been stored in the Electronic Control memory and that the countdown started.
3. When the programmed time has elapsed, you hear
an acoustic alarm while symbol flashes and the time display shows "0.00".
4. To switch off the acoustic alarm, press any button.
The oven will NOT switch off if in use. The Minute Minder function can also be used when the oven is off.
To change the Minute Minder setting
Press the "Time Function" button : the symbol
flashes near the "Minute Minder" symbol . It is now possible to change the Minute Minder setting by
pressing button or (Fig.11).
Fig. 10
To cancel the Minute Minder:
Press time function button : the symbol flashes
near the "Minute Minder" symbol . Then press button
until the time display shows "0.00".
Fig. 11
To programme the oven to
!
switch off
1. Switch the oven on, place food in the oven, select a cooking function and adjust the cooking tempe­rature, if required.
2. Press the "Time Function" button . The symbol
flashes near the "Cooking Duration" symbol .
The time display shows "0.00" at the left hand and the current time of day at the right hand (Fig. 12).
3. Symbol will flash for 5 seconds. Within this time,
press button to select the required time. Maximum time is 23 hours 59 minutes. Note that the time
indication on the right hand will also change as you
press button , showing at which time the oven will automatically switch off (fig. 13).
4. After another 5 seconds after you have set the time, the symbol stops flashing. This means that the setting has been stored in the Electronic Control memory and that the countdown started.
5. When cooking time is over, the oven automatically switches off. You hear an acoustic alarm while symbol
flashes and the time display shows "0.00".
6. To switch off the acoustic alarm, press any button.
To cancel the Cooking Duration Time:
Press time function button : the symbol flashes near the "Cooking Duration" symbol . Then press
button until the time display shows "0.00".
Please note that, if you cancel the "Cooking Duration", the oven does not switch off.
Fig. 12
Fig. 13
!
To programme the Oven to switch on and off
1. Carry out the "Cooking Duration" setting as described at points 1 to 4 in the previous chapter.
2. Press the "Time Function" button twice: the
symbol flashes near the "End of Cooking Time"
symbol (Fig. 14).
3. Within 5 seconds, press button to select the required end of cooking time, which is shown at the
right hand of the time display (Fig. 15).
4. After another 5 seconds after you have set the time, the symbol stops flashing, the thermometer symbol
# comes off, the temperature display shows "30"
and the oven switches off. This means that the setting has been stored in the Electronic Control memory and that the countdown started.
5. The oven will switch on and off automatically according to your settings. When cooking is completed, you hear an acoustic alarm while both
symbols and flash. The time display shows "0.00" at the left hand.
6. To switch off the acoustic alarm, press any button.
Fig. 14
Fig. 15
To cancel the programme, simply cancel the Cooking Duration time as described at the end of the previous chapter.
10
Loading...
+ 22 hidden pages