Thank you for choosing a first class
product from Electrolux, which hopefully
will provide you with lots of pleasure in
the future. The Electrolux ambition is to
offer a wide variety of quality products
that make your life more comfortable.
You will find some examples on the cover in this manual. Please take a few minutes to study this manual so that you
can take advantage of the benefits of
your new machine. We promise that it
will provide a superior User Experience
delivering Ease-of-Mind. Good luck!
T
1
4 electrolux
Contents
Safety instructions5
Description of the Appliance7
Operating the appliance9
Tips on Cooking and Frying13
Cleaning and Care16
What to do if …18
he following symbols are used in this user manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
3 General information and tips
2 Environmental information
safety instructions electrolux 5
Safety instructions
Please comply with these instructions. If you do not, any damage resulting is not covered by the
warranty.
5
This appliance conforms with the
following EU Directives:
– 73/23/EEC dated 19.02.1973 Low
Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC
Directive inclusive of Amending Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE
Marking Directive
Correct use
• This appliance should be used only
for normal domestic cooking and frying of food.
• The appliance must not be used as a
work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or
fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away
from the appliance.
• Only let bigger children work on the
appliance under supervision.
General safety
• The appliance may only be installed
and connected by trained, registered
service engineers.
• Built-in appliances may only be used
after they have built in to suitable
built-in units and work surfaces that
meet standards.
• In the event of faults with the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be switched off and
disconnected from the electrical
supply, to prevent the possibility of
an electric shock.
• Repairs to the appliance must only
be carried out by trained registered
service engineers.
Safety during use
• Remove stickers and film from the
glass ceramic.
• There is the risk of burns from the
appliance if used carelessly.
• Cables from electrical appliances
must not touch the hot surface of the
appliance or hot cookware.
• Overheated fats and oils can ignite
very quickly. When cooking with fat
or oil (e.g. chips) do not leave the appliance unattended.
• Switch the cooking zones off after
each use.
Safety when cleaning
• For cleaning, the appliance must be
switched off and cooled down.
• For safety reasons, the cleaning of
the appliance with steam jet or highpressure cleaning equipment is not
permitted.
6 electrolux safety instructions
How to avoid damage to the appliance
• The glass ceramic can be damaged
by objects falling onto it.
• The edge of the glass ceramic can
be damaged by being knocked by
the cookware.
• Cookware made of cast iron, cast
aluminium or with damaged bottoms
can scratch the glass ceramic if
pushed across the surface.
• Objects that melt and things that boil
over can burn onto the glass ceramic
and should be removed straightaway.
• To avoid damaging cookware and
glass ceramics, do not allow saucepans or frying pans to boil dry.
• Do not use the cooking zones with
empty cookware or without cookware.
description of the appliance electrolux 7
Description of the Appliance
Cooking surface layout
Single cooking zone
1200W
Double ring cooking zone
750/2200W
Control panel
Single cooking zone
1800W
Single cooking zone
1200W
Control panel layout
Pilot light
Double ring
Outside ring
Cooking zone and heat setting selection
Display
On/Off
On/Off
8 electrolux description of the appliance
Touch Control sensor fields
The appliance is operated using the
Touch Control sensor fields. Functions
are controlled by touching sensor fields
and confirmed by displays.
Touch the sensor fields from above,
without covering other sensor fields.
Sensor fieldFunction
On / OffTo switch the appliance on and off
Increase settingsTo select the cooking zone
To increase heat settings
Reduce settingsTo reduce heat settings
Double ring switchSwitches outside ring
on and off
Displays
Display Description
Cooking zone is switched off
- Heat settingsHeat setting is set
ERFaultMalfunction has occurred
Residual heatCooking zone is still hot
Child safety deviceLock/child safety device is engaged
Residual heat indicator
Warning! Risk of burns from residual heat. After being switched off, the
cooking zones need some time to
cool down. Look at the residual heat
indicator
.
Residual heat can be used for melting and keeping food warm.
operating the appliance electrolux 9
Operating the appliance
Switching the appliance on and off
Control panelDisplay
Switch onTouch for 2 seconds / decimal point flashes
Switch offTouch for 1 second / none
Selecting the cooking zone
Control panelDisplay
SelectTouch Decimal point lights up
The decimal point is displayed by
the selected cooking zone. Then a
heat setting must be set for this
cooking zone within 6 seconds, otherwise it must be re-selected.
Setting the heat setting
After selecting the cooking zone,
briefly release the sensor field .
Control field Display
IncreaseTouch to
DecreaseTouch to
Switch offTouch and at the same time
After 6 seconds with no input the
selection is cancelled and the decimal point goes out. To set a new setting, select the required cooking
zone again.
10 electrolux operating the appliance
Switching the double ring cooking zone on and off
With the double ring cooking zone the
heating surface can be matched to the
size of the cookware.
When a heat setting is set, both
rings are switched on and the pilot
light lights up.
Control panel Pilot light
Switch offTouch for 1 secondgoes out
Switch onTouch for 1 secondlights up
Using the child safety device
The child safety device prevents unintentional use of the appliance.
The child safety device can only be
activated immediately after the appliance has been switched on.
Switching on the child safety device
Step Control panel Display
1.
2.
Switch on appliance.
(Do not set a heat setting.)
Tou ch for 5 seconds is displayed.
/ (if hot)
Appliance switches off.
To override or switch the child safety device off sucessfully, the steps
must be performed immediately one
after the other. No other sensor
fields must be touched between the
steps described.
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.