Aeg-electrolux EHG30210X, EHG 30210 User Manual

Gas-Hob
USER MANUAL
35692-3303
Mod. EHG 30210
MY-TH-SG
English
Important Safety Information
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
About Installation, Cleaning and Maintenance
Disconnect the appliance from the electrical supply, before carrying out any cleaning or maintenance work.
Ensure a good ventilation around the appliance. A poor air supply could cause lack of oxygen.
Ensure that the gas supply complies with the gas type stated on the identification label, placed near the gas supply pipe.
Using a gas cooking appliance will produce heat
and moisture in the room which it has been installed in. Ensure a continuous air supply, keeping the air vents in good conditions or installing a cooker hood with discharge tube.
In case of intensive or long time use of the appliance, make the ventilation more efficient, by opening a window or increasing the electric exhaust fan power.
Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation.
The manufacturer disclaims any responsability should all the safety measures not be carried out.
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
During Operation
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
This appliance has been designed for non professional purpose in private houses only. It is meant to cook edible foodstuff only and purposes.
It is dangerous to alter the specification in any way.
For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats or other foodstuff could result in a fire.
2
MUST NOT be used for any other
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
Ensure that all control knobs are in the OFF position when not in use.
Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric cables are not in contact with it and keep them far enough from the heated parts of this appliance.
If the appliance is out of order, disconnect it from the electric supply.
Child Safety
This appliance has been designed to be operated by adults and children under supervision. Young children
MUST NOT be allowed to tamper with the controls or play
near or with the oven.
This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
Accessible parts of this appliance may become hot when it is in use. Children should be has cooled.
KEPT AWAY until it
Environmental Information
After installation, please dispose of the packaging with due regard to safety and the environment.
When disposing of an old appliance, make it unusable, by cutting off the cable.
The symbol indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
These instructions are only for the countries stated by the symbol printed on the front cover of this instruction book.
on the product or on its packaging
Contents
Description of the appliance .............................. 3
Instruction for the User ...................................... 3
Cleaning and Maintenance ................................ 4
Guarantee - After Sales Service........................ 5
Technical Data .................................................. 6
Instruction for the Installer ................................. 6
Gas connection ................................................. 7
Electrical Connection ........................................ 8
Adaptation to different
types of gas ....................................................... 9
Building In ........................................................ 10
Possibilities for insertion ................................. 10
Guide to Use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
)
Hints and Tips
Environmental information
MANUFACTURER:MANUFACTURER:
MANUFACTURER:
MANUFACTURER:MANUFACTURER: ELECTROLUX HOME PRODUCTS ITALY S.p.A. Viale Bologna, 298 47100 FORLÌ (Italy)
Description of the appliance
1
2
1 Rapid Burner - 2,8 kW
2 Auxiliary Burner - 1,0 kW
3 Burner Control Knobs
3
Instruction for the User
Burner Control Knobs
The hob burner control knobs are situated on the hob front panel. The symbols on the knobs mean that :
z there is no gas supply
there is maximum gas supply / Ignition setting
there is minimum gas supply
Lighting the burners
For easier lighting, proceed before putting a pan on the pan support.
1. Push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position.
2. After lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig.1 lett.D) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted.
3. Then, check the flame is regular and adjust it as required.
3
If you cannot light the flame even after several attempts, check the "cap" (Fig. 1 lett. A) and the "crown" (Fig. 1 lett. B) are in the correct position.
To put the flame out, turn the knob to the symbol z.
In the absence of electricity, ignition can occur without the electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position.
Always turn the flame down or put it out before taking the pans off the burner. Carefully supervise cookings with fats or oil, since these types of foodstuff can result in a fire, if over­heated.
Do not keep the control knob pressed for more than 15 seconds. If the burner does not light even after 15 seconds, release the control knob, turn it the "off" position and wait for at least one minute before trying to light the burner again. If the burner accidentally goes out, turn the control knob to the "off" position and wait for at least 1
minute before trying to light the burner again.
Energy saving advices
To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (see the table beside). It is also advisable, as soon as a liquid starts boiling, to turn down the flame so that it will barely keep the liquid simmering.
A
B
D
Fig. 1
Burner minimum maximum
Rapid 180 mm. 260 mm.
Auxiliary 80 mm. 160 mm.
C
A - Burner cap
B - Burner crown
C - Ignition candle
D - Thermocouple
diameter diameter
• Use only pans or pots with flat bottom.
Cleaning and Maintenance
Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.
Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. Carefully wash the stainless steel components with water, then wipe them dry with a soft cloth. The pan supports are dishwasher proof. If the marks are particularly difficult to remove, use common non-abrasive cleaners or specific products. Never use steel wool pads or acids. In models with electric ignition, this feature is obtained through a ceramic "candle" and a metal electrode (Fig. 1 lett. C). Keep these components well clean, to avoid difficult lighting, and check that the burner crown holes (Fig 1 - lett. B) are not obstructed.
The stainless steel can become tarnished if excessively heated. Therefore prolonged cooking with potstones, earthenware pans or cast-iron plates is inadvisable. Also, do not use aluminium foil to protect the top during
use.
Periodic maintenance
Periodically ask your local Service Centre to check the conditions of the gas supply pipe and the pressure adjuster, if fitted. To ensure the good operation of the hob and its safety features, it is necessary that the taps are periodically lubricated.
4
Guarantee - After Sales Service
Service and original spare parts
This machine, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results.
Any repair work which needs to be carried out should be done with the utmost care and attention.
For this reason we recommend that for any problem you contact the dealer who sold it to you, or our nearest authorized Service Centre, specifying the nature of the problem, the appliance model (Mod.), the product number (Prod. No.) and the serial number (Ser. No.) marked on the identification plate.
Original spareparts, certified by the product manufacturer and carrying this symbol are only available at our Service Centre and authorized spareparts shops.
5
Loading...
+ 11 hidden pages