Aeg-electrolux EHD60120P 87P User Manual

user manual

Induction hob

EHD60120P

We were thinking of you
when we made this product

Welcome to the world of Electrolux

Thank you for choosing a first class
product from Electrolux, which hopefully
will provide you with lots of pleasure in
the future. The Electrolux ambition is to
offer a wide variety of quality products
that make your life more comfortable.
You will find some examples on the cov­er in this manual. Please take a few min­utes to study this manual so that you
can take advantage of the benefits of
your new machine. We promise that it
will provide a superior User Experience
delivering Ease-of-Mind. Good luck!

electrolux 3

4 electrolux contents

T

1

Contents

Safety instructions 5
Description of the Appliance 7
Operating the appliance 10
Tips on Cooking and Frying 22
Cleaning and Care 26
What to do if … 28
Disposal 30
Installation Instructions 31
Assembly 34
Guarantee/Customer Service 39
Service 42

he following symbols are used in this user information:

Warning! This must be read! Important advice for the safety of persons and
information on avoiding damage to the appliance

3 General information and advice

2 Information on environmental protection

z Dangerous voltage

safety instructions electrolux 5

Safety instructions

Please comply with these instructions. If
you do not, any damage resulting is not
covered by the warranty.

5

This appliance conforms with the
following EU Directives:

– 73/23/EEC dated 19.02.1973 Low

Voltage Directive

– 89/336/EEC dated 03.05.1989 EMC

Directive inclusive of Amending Di­rective 92/31/EEC

– 93/68/EEC dated 22.07.1993 CE

Marking Directive

Correct use

• People (including children) who, be­cause of their physical, sensory or
mental capabilities or their inexperi­ence or ignorance are not able to use
the device safely, should not use this
device without supervision or in­struction by a responsible person.

• Do not leave the appliance unattend­ed during operation.

• This appliance should be used only
for normal domestic cooking and fry­ing of food.

• The appliance must not be used as a
work surface or as a storage surface.

• Additions or modifications to the ap­pliance are not permitted.

• Do not place or store flammable liq­uids, highly inflammable materials or
fusible objects (e.g. plastic film, plas­tic, aluminium) on or near the appli­ance.

Children’s safety

• Small children must be kept away
from the appliance.

• Only let bigger children work on the
appliance under supervision.

• To avoid small children and pets un­intentionally switching the appliance
on, we recommend activation of the
child safety device.

General safety

• The appliance may only be installed
and connected by trained, registered
service engineers.

• Built-in appliances may only be used
after they have built in to suitable
built-in units and work surfaces that
meet standards.

• In the event of faults with the appli­ance or damage to the glass ceramic
(cracks, scratches or splits), the ap­pliance must be switched off and
disconnected from the electrical
supply, to prevent the possibility of
an electric shock.

• Repairs to the appliance must only
be carried out by trained registered
service engineers.

6 electrolux safety instructions

Safety during use

• Remove stickers and film from the
glass ceramic.

• There is the risk of burns from the
appliance if used carelessly.

• Cables from electrical appliances
must not touch the hot surface of the
appliance or hot cookware.

• Overheated fats and oils can ignite
very quickly. Warning! Fire hazard!

• Switch the cooking zones off after
each use.

• Users with implanted pacemakers
should keep their upper body at least
30 cm from induction cooking zones
that are switched on.

• Risk of burns! Do not place objects
made of metal, such as knives, forks,
spoons and saucepan lids on the
cooking surface, as they can get hot.

Safety when cleaning

• For cleaning, the appliance must be
switched off and cooled down.

• For safety reasons, the cleaning of
the appliance with steam jet or high­pressure cleaning equipment is not
permitted.

How to avoid damage to the appli­ance

• The glass ceramic can be damaged
by objects falling onto it.

• The edge of the glass ceramic can
be damaged by being knocked by
the cookware.

• Cookware made of cast iron, cast
aluminium or with damaged bottoms
can scratch the glass ceramic if
pushed across the surface.

• Objects that melt and things that boil
over can burn onto the glass ceramic
and should be removed straighta­way.

• Do not use the cooking zones with
empty cookware or without cook­ware.

• To avoid damaging cookware and
glass ceramics, do not allow sauce­pans or frying pans to boil dry.

• The ventilation gap of 5mm between
the worktop and front of the unit un­derneath it must not be covered.

description of the appliance electrolux 7

Description of the Appliance

Cooking surface layout

Induction cooking zone 1400 W

with power function 1800 W

Induction cooking zone 1850 W

with power function 2500 W

Induction cooking zone 2400 W

with power function 3700 W

Control panel

Control panel layout

Heat setting selection

Power function

On/Off
with power indicator

Display

Cooking zone indicators
Timer function

Timer display

Lock

Timer

8 electrolux description of the appliance

Touch Control sensor fields

The appliance is operated using Touch
Control sensor fields. Functions are
controlled by touching sensor fields and
confirmed by displays and acoustic sig­nals.
Touch the sensor fields from above,
without covering other sensor fields.

Sensor field Function

On / Off To switch the appliance on and off

Increase settings Increasing heat setting/time

Decrease settings Decreasing heat setting/time

Timer Timer selection

Lock Locking/unlocking the control panel

Power Switching the power function on and off

Warning! Risk of burns from heat
emitted. Lengthy cooking on higher
settings with larger cookware on
the front cooking zones can heat
the sensor fields. Take care when
touching sensor fields.

description of the appliance electrolux 9

Displays

Display Description

Cooking zone is switched off

Keep warm setting Keep warm setting is set

- Heat settings Heat setting is set

Automatic warm up function Automatic warm-up function is activat-

ed

Fault Malfunction has occurred

Pan detection Cookware is unsuitable or too small or

no cookware has been placed on the
cooking zone

Residual heat Cooking zone is still hot

Child safety device Lock/child safety device is engaged

Power Power function is switched on

Automatic switch off Switch off is active.

Residual heat indicator

Warning! Risk of burns from residu­al heat. After being switched off, the
cooking zones need some time to
cool down. Look at the residual heat
indicator

.

Residual heat can be used for melt­ing and keeping food warm.

The induction cooking zones create
the heat required for cooking directly in
the base of the cookware. The glass ce­ramic is merely heated by the residual
heat of the cookware.
The cooling fan switches itself on and
off depending upon the temperature of
the electronics.

10 electrolux operating the appliance

Operating the appliance

Use the induction cooking zones
with suitable cookware.

Switching the appliance on and off

Control panel Display Pilot light

Switch on Touch for 2 seconds / lights up

Switch off Touch for 1 second / none goes out

After switching on, within approx.
10 seconds a heat setting or a func­tion must be set, otherwise the ap­pliance automatically switches
itself off.

Setting the heat setting

Control panel Display

Increase Touch to /

Decrease Touch to

Switch off Touch and at the same time

The keep warm setting lies be­tween and . It is used to keep
food warm.

operating the appliance electrolux 11

Using the automatic warm-up function

All cooking zones are equipped with an
automatic warm-up function. The auto­matic warm-up function sets the cook­ing zone to the highest setting for a
certain period of time and then automat­ically switches back to the cooking set­ting that was originally set.

Step Control panel Display

1. Setting the maximum setting /

2. Place to one side for a moment /

3. touch

4. touch in order to set the desired

cooking setting

If during the automatic warm up
a higher heat setting is selected,
e.g. from to , the automatic
warm up is adjusted.

The length of time that the automatic
warm up function operates depends on
the heat setting selected.

until /

after 3 seconds

Heat setting Length of the automatic warm up [min: sec]

v

1

2

3

4

5

6

7

8

9

0:10

0:10

0:10

3:10

5:50

10:10

2:00

2:30

2:50

---

12 electrolux operating the appliance

Locking/unlocking the control panel

The control panel, with the exception of
the “On/Off” sensor field, can be locked
at any time in order to prevent the set­tings being changed e.g. by wiping over
the panel with a cloth.

Control panel Display

Switch on Touch (for 3 seconds)

Switch off Touch previously set heat setting

When you switch the appliance off,
the locking function is automatically
switched off.

operating the appliance electrolux 13

Using the child safety device

The child safety device prevents unin­tentional use of the appliance.

Setting the child safety device

Step Control panel Display/Signal

1. Switch on the appliance
(Do not set a heat setting)

2. Touch until the signal sounds Acoustic signal

3. Touch

Appliance switches off. The child safety device is engaged.

Releasing the child safety device

Step Control panel Display/Signal

1. Switch on the appliance

2. Touch until the signal sounds Acoustic signal

3. Touch

Appliance switches off. The child safety device is released.

Overriding the child safety device

The child safety device can be released
in this way for a single cooking session;
it remains activated afterwards.

Step Control panel Display/Signal

1. Switch on the appliance

2. Touch and at the same time / acoustic signal

Until the appliance is next switched off, it can used as normal.

14 electrolux operating the appliance

Switching the power function on and off

The power function makes more
power available to the induction cooking
zones, e.g. to bring a large quantity of
water to the boil quickly.
The power function is activated for 10
minutes. After that the induction cook­ing zone automatically switches back to
heat setting 9.

Control panel Display

Switch on Touch

Switch off Touch

Touch

If the power function has ended, the
cooking zones automatically switch
back to the heat setting set previ­ously.

Power Management

The cooking zones of the cooking sur­face have a maximum power available
to them.
Two cooking zones make up a pair (see
figure).
So that the Power function can always
be carried out, Power Management may
reduce the power of the other cooking
zone in the pair

Example: heat setting 9 is selected on a
cooking zone. The Power function is
switched on for the cooking zone paired
up with it. The Power function is per­formed, but heat setting 9 on one cook­ing zone and Power function on the
other cooking zone of a pair exceeds
the maximum output for both. Therefore
Power Management reduces the first
cooking zone that was switched on from
9 to 7, for example, and the display for
this cooking zone alternates between 9
and 7 and then remains on the current
maximum of 7. (Whether the display al­ternates between 9 and 7 or 9 and 6 or
other values, depends on the appliance
type and the size of the cooking zone.)

operating the appliance electrolux 15

16 electrolux operating the appliance

Using the timer

All cooking zones can use each use one
of the two timer functions at the same
time.

Function Condition Outcome after the

time has elapsed

Automatic cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone switches

off

Countdown timer cooking zones not in use acoustic signal

00 flashes

If a cooking zone is switched off, the
timer function set is also switched
off.

If a heat setting is set on this cook­ing zone in addition to a countdown
timer, the cooking zone is switched
off after the time set has elapsed.

operating the appliance electrolux 17

Selecting the cooking zone

Step Control panel Display

1. Touch once Pilot light of the first cooking

zone flashes

2. Touch once Pilot light of the second cook-

ing zone flashes

3. Touch once Pilot light of the third cooking

zone flashes

The heat setting indicator of the se­lected cooking zone goes out, as
long as the timer time can be set.

If the pilot light is flashing more
slowly, the heat setting indicator ap­pears again and the heat setting can
be re-set or modified.

If other timer functions are set, after
a few seconds the shortest remain­ing time of all the timer functions is
displayed and the corresponding pi­lot light flashes.

18 electrolux operating the appliance

Setting the time

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected

flashes

2. Touch or for the

00 to 99 minutes

cooking zone selected

After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.

Switching off the Timer function

Step Control panel Display

1. Select a cooking
zone

Pilot light of the selected cooking zone
flashes more quickly.
Remaining time is displayed

2. Touch for the cooking

The remaining time counts down to 00.

zone selected
Simultaneoulsy touch

and

for the cooking

00 is displayed.

zone selected

The pilot light goes out.
The Timer function for the selected cooking zone is switched off.

Changing the time

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected

flashes faster
The time remaining is displayed

2. Touch or for the

01 to 99 minutes

cooking zone selected

After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.

operating the appliance electrolux 19

Displaying the time remaining for a cooking zone

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected

flashes faster
The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Switching off the acoustic signal

Step Control panel field Acoustic signal

1. Touch Acoustic signal to acknowledge.

Acoustic signal stops.

20 electrolux operating the appliance

Automatic switch off

Cooking surface

• If after switching on the cooking sur­face, a heat setting is not set for a
cooking zone within approx. 10 sec­onds, the cooking surface automati­cally switches itself off.

• If one or more sensor fields are cov­ered by objects (a pan, cloths, etc.)
for longer than approx. 10 seconds,
a signal sounds and the cooking sur­face switches off automatically.

• If all cooking zones are switched off,
the cooking surface automatically
switches itself off after approx. 10
seconds.

Control panel

• When the appliance is switched off, if
one or more of the sensor fields on
the control panel are covered for
more that 10 seconds, an acoustic
signal sounds. The acoustic signal
switches itself off automatically when
the sensor fields are no longer cov­ered.

Induction cooking zones

• In the event of overheating (e.g.
when a pan boils dry) the cooking
zone automatically switches itself off.

is displayed. Before being used

again, the cooking zone must be set
to 0 and allowed to cool down.

• If cookware that is not suitable is
used, flashes in the display and af­ter 2 minutes the display for the
cooking zone switches itself off.

• If one of the cooking zones is not
switched off after a certain time, or if
the heat setting is not modified, the
relevant cooking zone switches off
automatically. is displayed. Before
being used again, the cooking zone
must be set to 0.

Heat setting Switches off after

v, 1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

operating the appliance electrolux 21

22 electrolux tips on cooking and frying

Tips on Cooking and Frying

Information on acrylamides
According to the latest scientific

knowledge, intensive browning of
food, especially in products con­taining starch, can constitute a
health risk due to acrylamides.
Therefore we recommend cooking
at the lowest possible temperatures
and not browning foods too much.

Cookware for induction cooking zones

Cookware material

Cookware material Suitable

Steel, enamelled steel yes

Cast iron yes

Stainless steel if appropriately labelled by the manufacturer

Aluminium, copper, brass ---

Glass, ceramic, porcelain ---

Cookware for induction cooking
zones is labelled as suitable by the
manufacturer.

Suitability test

Cookware is suitable for induction cook­ing, if …

• ... a little water on an induction cook­ing zone set to heat setting 9 is heat­ed within a short time.

• ... a magnet sticks to the bottom of
the cookware.

Certain cookware can make noises
when being used on induction cook­ing zones. These noises are not a
fault in the appliance and do not af­fect operation in any way.

Bottom of the cookware

The bottom of the cookware should be
as thick and flat as possible.

Pan size

Induction cooking zones adapt auto­matically to the size of the bottom of the
cookware up to a certain limit. However
the magnetic part of the bottom of the
cookware must have a minimum diame­ter depending upon the size of the
cooking zone.

Diameter of cooking zone

[mm]

280 180

180 145

145 120

tips on cooking and frying electrolux 23

Minimum diameter of dish base

[mm]

The cookware must be placed cen­trally on the cooking zone.

24 electrolux tips on cooking and frying

Tips on energy saving

Place cookware on the cooking
zone before it is switched on.

If possible, always place a lid on the
cookware.

tips on cooking and frying electrolux 25

Examples of cooking applications

The information given in the following table is for guidance only.

Heat

The power function is suitable for heating large quantities of liquid.

Cooking-

set­ting

process

0 Off position

Keeping

1

1-2

2-3

3-4

4-5

6-7

7-8

9

Melting

Simmer-

ing on low

Steaming

Braising

Boiling

Boiling

Searing

food

warm

Solidi-

fying

heat

Gentle
Frying

Heavy
Frying

Deep

frying

melting butter, chocolate, gela-

Simmering rice and milk-based

Heating up ready-cooked meals

bleu, cutlets, rissoles, sausages,

steaks, Flädle (pancakes for gar-

Boiling large quantities of water, cooking pasta, searing meat (goulash, pot

suitable for

Keeping cooked foods warm as required Cover

Hollandaise sauce,

tine

Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on

dishes

Steaming vegetables, fish

braising meat

Steaming potatoes 20-60 mins.

Cooking larger quantities of

food, stews and soups

Frying escalopes, veal cordon

liver, roux, eggs, pancakes,

doughnuts

Hash browns, loin steaks,

nishing soup)

Cooking

time

5-25 mins. Stir occasionally

25-50 mins.

20-45 mins.

60-150 mins.

Steady frying

5-15 mins.

per pan

roast), deep frying chips

much liquid as rice, stir

With vegetables add only

a little liquid (a few table-

Use only a little liquid, e.

g.: max.

Up to 3 l liquid plus ingre-

Tips/Hints

Add at least twice as

milk dishes part way

through cooking

spoons)

¼

750 g potatoes

Turn halfway through

Turn halfway through

l water for

dients

cooking

cooking

26 electrolux cleaning and care

Cleaning and Care

Take care! Risk of burns from resid­ual heat.

Warning! Sharp objects and abra­sive cleaning materials will damage
the appliance. Clean with water and
washing up liquid.

Warning! Residues from cleaning
agents will damage the appliance.
Remove residues with water and
washing up liquid.

Cleaning the appliance after each use

1. Wipe the appliance with a damp
cloth and a little washing up liquid.

2. Rub the appliance dry using a clean
cloth.

Removing deposits

1. Place a scraper on the glass ceramic
surface at an angle.

2. Remove residues by sliding the
blade over the surface.

3. Wipe the appliance with a damp
cloth and a little washing up liquid.

4. Rub the appliance dry using a clean
cloth.

cleaning and care electrolux 27

Remove

im-

Type of dirt

medi-

ately

sugar, food containing sugar yes ---

plastics, tin foil yes ---

limescale and water rings --- yes

fat splashes --- yes

shiny metallic discolouration --- yes

*Scrapers and cleaners for glass ceramic and

stainless steel can be purchased in specialist
shops

when the appliance

has cooled down

Remove stubborn residues with a
cleaner for glass ceramic or stain­less steel.

Scratches or dark stains on the
glass ceramic that cannot be re­moved do not however affect the
functioning of the appliance.

using

a scraper*

cleaner for glass ce-

ramic or stainless

steel*

28 electrolux what to do if …

What to do if …

Problem Possible cause Remedy

The appliance cannot be
switched on or is not operating

The residual heat indicator is
not displaying anything

The automatic warm up func­tion is not switching itself on

Repeated acoustic signal (6x),
appliance switches off

Acoustic signal sounds when
appliance is switched off

Acoustic signal sounds and
appliance switches itself on
and then off again; after 5 sec­onds another acoustic signal
sounds

Display is switching between
two heat settings

More than 10 seconds have
passed since the appliance
was switched on

The lock is switched on Switch off the lock (See the

The child safety device is
switched on

Several sensor fields were
touched at the same time

Safety cut-out has been trig­gered

The cooking zone was only on
for a short time and is therefore
not hot

There is still residual heat on
the cooking zone

The highest heat setting is set The highest heat setting has

One or more sensor fields
have been covered for longer
than 10 seconds

The control panel is wholly or
partly covered by objects.

The On/Off sensor field has
been covered up, e.g. by a
cloth

Power management is reduc­ing the power of this cooking
zone

Switch the appliance on again.

section “Locking/unlocking
the control panel”)

Deactivate child safety device
(See the section “Child safety
device”)

Only touch one sensor field

Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again

If the cooking zone is sup­posed to be hot, call the Cus­tomer Service Department.

Let the cooking zone cool
down

the same power as the auto­matic warm up function

Uncover sensor field

Remove objects.

Do not place any objects on
the control panel

See the section “Switching the
power function on and off”

what to do if … electrolux 29

Problem Possible cause Remedy

flashes Unsuitable cookware Use suitable cookware

No cookware on the cooking
zone

The diameter of the bottom of
the cookware is too small for
the cooking zone

is lit Overheating protection for the

cooking zone has been trig­gered

Safety cut-out has been trig­gered

and number are displayed Electronics fault Disconnect the appliance from

and minus are displayed Light rays that are too strong

on the control panel, for exam­ple bright sunlight

Place cookware on the cook­ing zone

Move onto a smaller cooking
zone

Use suitable cookware

Switch off the cooking zone.
Switch the cooking zone on
again

Switch off the cooking zone.
Switch the cooking zone on
again

the electrical supply for a few
minutes (Take the fuse out of
the house’s wiring system)
If after switching on again,
is displayed again, call the
customer service department

Briefly shade the control panel,
for example with the hand
Acoustic signal sounds, appli­ance switches itself off Switch
appliance on (again)

If you are unable to remedy the
problem by following the above
suggestions, please contact your
dealer or the Customer Care De­partment.

Warning! Repairs to the appliance
are only to be carried out by quali­fied service engineers. Considera­ble danger to the user may result
from improper repairs.

If the appliance has been wrongly
operated, the visit from the custom­er service technician or dealer may
not take place free of charge, even
during the warranty period.

30 electrolux disposal

Disposal

Packaging material
The packaging materials are envi-

ronmentally friendly and can be re­cycled. The plastic components are
identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the
packaging materials in the appro­priate container at the community
waste disposal facilities.

Old appliance

The symbol
its packaging indicates that this
product may not be treated as
household waste. Instead it shall be
handed over to the applicable col­lection point for the recycling of
electrical and electronic equipment.
By ensuring this product is dis­posed of correctly, you will help pre­vent potential negative
consequences for the environment
and human health, which could oth­erwise be caused by inappropriate
waste handling of this product. For
more detailed information about re­cycling of this product, please con­tact your local city office, your
household waste disposal service
or the shop where you purchased
the product.

W on the product or on

Installation Instructions

Safety instructions

Warning! This must be read!
The laws, ordinances, directives and
standards in force in the country of use
are to be followed (safety regulations,
proper recycling in accordance with the
regulations, etc.)
Installation may only be carried out by a
qualified electrician.
The minimum distances to other appli­ances and units are to be observed.
Anti-shock protection must be provided
by the installation, for example drawers
may only be installed with a protective
floor directly underneath the appliance.
The cut surfaces of the worktop are to
be protected against moisture using a
suitable sealant.
The sealant seals the appliance to the
work top with no gap.
When building in, protect the underside
of the appliance from steam and mois­ture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to
doors and under windows. Otherwise
hot cookware may be knocked off the
rings when doors and windows are
opened.

installation instructions electrolux 31

32 electrolux installation instructions

z Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of

voltage.

• Follow connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection by in-

stalling correctly.

• The appliance must be connected to
the electrical supply by a qualified
electrician.

z Risk of injury from electrical current.

• Loose and inappropriate plug and
socket connections can make the
terminal overheat.

• Have the clamping connections cor­rectly installed by a qualified electri­cian.

• Use strain relief clamp on cable.

• In the event of single-phase or two-

phase connection, the appropriate
mains cable of type H05BB-F Tmax
90°C(or higher) must be used.

• If this appliance’s mains cable is
damaged, it must be replaced by a
special cable (type H05BB-F Tmax
90°C; or higher). The latter is availa­ble from the Customer Care Depart­ment.

A device must be provided in the electri­cal installation which allows the appli­ance to be disconnected from the mains
at all poles with a contact opening width
of at least 3 mm.
Suitable isolation devices include line
protecting cut-outs, fuses (screw type
fuses are to be removed from the hold­er), earth leakage trips and contactors.

Sticking on the seal

• Clean the worktop around the cut­out area.

• Stick the single-sided adhesive seal­ing tape provided on the underside
of the hob around the outside edge
ensuring that it is not stretched. The
two ends of the tape should join in
the middle of one side. After trim­ming the tape (allow it to overlap by
2-3 mm), press the two ends togeth­er.

installation instructions electrolux 33

34 electrolux assembly

Assembly

assembly electrolux 35

36 electrolux assembly

assembly electrolux 37

38 electrolux

Rating Plate

EHD60120P

55GAD89AG

ELECTROLUX

220- 50 Hz

949 592 750

Induction 7,4 kW

7,4 kW

Guarantee/Customer Service

European Guarantee

This appliance is guaranteed by Electrolux in
each of the countries listed at the back of this
user manual, for the period specified in the appli­ance guarantee or otherwise by law. If you move
from one of these countries to another of the
countries listed below the appliance guarantee
will move with you subject to the following qual­ifications:

• The appliance guarantee starts from the date

• The appliance guarantee is for the same pe-

• The appliance guarantee is personal to the

• The appliance is installed and used in ac-

• The appliance is installed in accordance with

The provisions of this European Guarantee do
not affect any of the rights granted to you by law.

you first purchased the appliance which will
be evidenced by production of a valid pur­chase document issued by the seller of the
appliance.

riod and to the same extent for labour and
parts as exists in your new country of resi­dence for this particular model or range of
appliances.

original purchaser of the appliance and can­not be transferred to another user.

cordance with instructions issued by Elec­trolux and is only used within the home, i.e. is
not used for commercial purposes.

all relevant regulations in force within your
new country of residence.

guarantee/customer service electrolux 39

40 electrolux guarantee/customer service

www.electrolux.com

p t b

Albania

Belgique/België/
Belgien

Èeská republika

Danmark

Deutschland

Eesti

España

France

Great Britain

Hellas

Hrvatska

Ireland

Italia

Latvija

Lithuania [phone]

Luxembourg

Magyarország

Nederland

Norge

Österreich

Polska

Portugal

Romania

Schweiz/Suisse/
Svizzera

Slovenija

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

www.electrolux.fr

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

[phone]

Rr. Pjeter Bogdani Nr. 7 Tirane

Bergensesteenweg 719, 1502 Lembeek

Budìjovická 3, Praha 4, 140 21

Sjællandsgade 2, 7000 Fredericia

Muggenhofer Str. 135, 90429 Nürnberg

Mustamäe tee 24, 10621 Tallinn

Carretera M-300, Km. 29,900
Alcalá de Henares Madrid

Addington Way, Luton, Bedfordshire
LU4 9QQ

4 Limnou Str., 54627 Thessaloniki

Slavonska avenija 3, 10000 Zagreb

Long Mile Road Dublin 12

C.so Lino Zanussi, 26 - 33080 Porcia (PN)

Kr. Barona iela 130/2, LV-1012, Riga

Žirmūnų 67, LT09001 Vilnius

Rue de Bitbourg, 7, L-1273 Hamm

H-1142 Budapest XIV,
Erzsébet királyné útja 87

Vennootsweg 1, 2404 CG ­Alphen aan den Rijn

Risløkkvn. 2 , 0508 Oslo

Herziggasse 9, 1230 Wien

ul. Kolejowa 5/7, Warszawa

Quinta da Fonte - Edificio Gonçalves Zarco - Q
35
2774 - 518 Paço de Arcos

Str. Garii Progresului 2, S4, 040671 RO

Industriestrasse 10, CH-5506 Mägenwil

Electrolux Ljubljana d.o.o.
Gerbièeva 98, 1000 Ljubljana

p t b

guarantee/customer service electrolux 41

Slovensko

Suomi

Sverige

Türkiye

Россия

[phone]

www.electrolux.fi

[phone]

[phone]

[phone]

Electrolux Slovakia s.r.o., Electrolux Domáce
spotrebièe SK, Seberíniho 1, 821 03 Bratislava

Electrolux Service, S:t Göransgatan 143,
S-105 45 Stockholm

Tarlabaþý caddesi no : 35 Taksim
Istanbul

129090 Москва, Олимпийский проспект, 16,
БЦ „Олимпик“

42 electrolux service

Service

In the event of technical faults, please
first check whether you can remedy the
problem yourself with the help of the op­erating instructions (section “What to do
if…”).

If you were not able to remedy the prob­lem yourself, please contact the Cus­tomer Care Department or one of our
service partners.

In order to be able to assist you quickly,
we require the following information:

– Model description
– Product number (PNC)
– Serial number (S No.)

(for numbers see rating plate)

– Type of fault
– Any error messages displayed by the

appliance

– three digit letter-number combina-

tion for glass ceramic

So that you have the necessary refer­ence numbers from your appliance at
hand, we recommend that you write
them in here:

Model description: .....................................

PNC: .....................................

S No: .....................................

www.electrolux.com

867 200 245-C-040507-03