Aeg-electrolux EHB 30100 User Manual

user manual

Hob

EHB30100

2 electrolux

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety information 2
Installation 3
Product description 5
Operation 6
Helpful hints and tips 6

SAFETY INFORMATION

For your safety and correct operation
of the appliance, read this manual
carefully before installation and use. Al­ways keep these instructions with the
appliance even if you move or sell it.
Users must fully know the operation
and safety features of the appliance.

General safety

Warning! Persons (including children)

with reduced physical sensory, mental
capabilities or lack of experience and
knowledge must not use the appliance.
They must have supervision or
instruction for the operation of the
appliance by a person responsible for
their safety.

The appliance is not intended to be op­erated with external timer or separated
remote-control system.

Child safety

• Only adults can use this appliance. Chil­dren must get supervision to make sure
that they do not play with the appliance.

• Keep all packaging away from children.
There is a risk of suffocation and physical
injury.

• Keep children away from the appliance
during and after the operation, until the
appliance is cold.

Safety during operation

• Remove all packaging, stickers and lay­ers from the appliance before the first
use.

• Set the cooking zones to "off" after each
use.

Care and cleaning 7
What to do if… 8
Technical data 9
Environment concerns 9
Service and Guarantee in Taiwan 9

Subject to change without notice

• Risk of burns! Do not put cutlery or sau­cepan lids on the cooking surface, as
they can become hot.

Warning! Fire danger! Overheated
fats and oils can ignite very quickly.

Correct operation

• Do not leave the appliance unattended
during operation.

• Always monitor the appliance during op­eration.

• Do not let the liquids overflow into the
holes of the top of the hob

• Never use the hob without cookware.

• Only use the appliance for domestic
cooking tasks! Do not use it for commer­cial or industrial purposes or for any pur­pose other than that for which it was de­signed. This way, you will avoid risk to
person or property.

• Use only cookware with bottom diameter
applicable to the dimensions of burners.

• Pots must not enter the control zone.

• Do not use the appliance as a work or a
storage surface.

• Never use unstable cookware to prevent
from tilt and accident.

• Do not put or keep flammable liquids (or
items that are wet with flammable prod­ucts) and materials, or fusible objects
(made of plastic or aluminium) on or near
the appliance. Risk of explosion or fire.

• Use only the accessories delivered with
appliance.

• Be careful when you connect the appli­ance to the near sockets. Do not let elec­tricity bonds touch the appliance or hot
cookware. Do not let electricity bonds
tangle.

electrolux 3

How to prevent a damage to the
appliance

• Do not let acid liquids such as vinegar,
lemon juice or limescale removing agents
to touch the hob. This will cause matt
patches

• Do not place wet pan lids on the hot­plates and do not let hot pans to cool on
the hotplates. If not condensation and
rust can form.

• Do not let cookware boil dry to prevent
the damage to cookware and hotplate.

• Do not use the solid hotplate with empty
cookware or without cookware.

INSTALLATION

Installation

Warning! Read and follow the

instructions carefully. There is a risk of
injury or damage to the appliance.

• Make sure that the appliance is not dam­aged because of transportation. Do not
connect a damaged appliance. If it is
necessary, speak to the supplier.

Installation and connection of the ap-

•

pliance to the power supply must on­ly be done by qualified personnel.

• Only use built-in appliances after you as­semble the appliance into correct built-in
units and work surfaces that obey the
standards.

• Do not change the specifications or mod­ify this product. There is a risk of injury or
damage to the appliance.

• Fully obey the laws, ordinances, direc­tives and standards in force in the coun­try where you use the appliance (safety
regulations, recycling regulations, electri­cal safety rules etc.).

• Keep the minimum distances to other ap­pliances and units.

• Install anti-shock protection, for example
install the drawers only with a protective
panel directly below the appliance.

• Prevent damage of the cut surfaces of
the worktop against moisture with a cor­rect sealant!

• Seal the appliance to the worktop with no
space left with a correct sealant.

• Do not cover any part of the appliance
with aluminium foil.

Disposal of the appliance

• To prevent the risk of physical injury or
damage
– Disconnect the appliance from the

power supply.

– Cut off the mains cable where it con-

nects with the appliance and discard it.

– Speak to your local authorised facilities

for disposal of your appliance.

• Prevent damage of the bottom of the ap­pliance from steam and moisture, e.g.
from a dishwasher or oven.

• Do not install the appliance adjacent to
doors and below windows. Hot cook­ware can be hit off the hob when you
open doors or windows.

Disconnect the appliance from the

•

electrical supply, before you do
maintenance work or cleaning.

Warning! Risk of injury from electrical

current. Carefully obey the instructions
for electrical connections.

• The electrical mains terminal is live.

• Make the electrical mains terminal free of
voltage.

• Install correctly to give anti-shock protec­tion.

• Loose and incorrect mains plug and
socket connections can make the termi­nal become too hot.

• A qualified electrician must install the
clamping connections correctly.

• Use a strain relief clamp on cable.

• Use the correct mains connection cable
and replace the damaged mains cable
with the proper cable type. Speak to your
local Service Centre.

The appliance must have the electrical in­stallation which lets you disconnect the ap­pliance from the mains at all poles with a
contact opening width of minimum 3 mm.
You must have correct isolation devices:
line protecting cut-outs, fuses (screw type

4 electrolux

fuses removed from the holder), ground
leakage trips and contactors.

The manufacturer is not responsible for
any injury to persons and pets or dam­age to property caused by failure to
obey these requirements.

Electrical connection

• Ground the appliance according to safety
precautions.

• Make sure that the rated voltage and
type of power on the rating plate agree
with the voltage and the power of the lo­cal power supply.

• This appliance is supplied with a mains
cable. It has to be supplied with a correct
plug, able to support the load marked on
the rating plate. The plug has to be fitted
in a correct socket.

• Any electrical component must be instal­led or replaced by the Service Force
Centre technician or qualified service per­sonnel.

• Always use a correctly installed shock­proof socket.

• Make sure that there is an access to the
mains plug after installation.

• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.

• The appliance must not be connected
with an extension cable, an adapter or a
multiple connection (risk of fire). Check
that the ground connection is in conform­ity with the standard and regulations
force.

• The power cable must be placed in such
a way that it does not touch any hot part.

• Connect the appliance to the mains with
a device that lets to disconnect the appli­ance from the mains at all poles with a
contact opening width of minimum 3
mm, eg. automatic line protecting cut­out, earth leakage trips or fuse.

• None of a parts of the connection cable
can not get a temperature 90 °C. The
blue neutral cable must be connected to
the terminal block label with "N". The
brown (or black) phase cable (fitted in the
terminal block contact marked with "L")
must always be connected to the live
phase.

Replacement of the connection cable

To replace the connection cable use only
H05V2V2-F T90 or equivalent type. Make
sure that the cable section is applicable to
the voltage and the working temperature.
The yellow/green earth wire must be ap­proximately 2 cm longer than the brown (or
black) phase wire.

Assembly

min. 650 mm

55 mm

40-50 mm

30 mm

min. 100 mm

490 mm

270 mm

If several 30 cm hobs are to be installed
side by side into the same cut out, an as­sembly kit including a support side bracket
and supplementary seals is available at our
Service Centres. The relevant installation in­structions are supplied within the kit pack­age.

A

B

A — supplied seal
B — supplied brackets

Possibilities for insertion
Kitchen unit with door

The panel installed below the hob must be
easy to remove and let an easy access in
case a technical assistance intervention is
necessary.