Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional
design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
In addition to this you find environmental and energy saving aspects as an integral part of our products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently.
To refer to this manual any time you need to, we recommend you to keep it in a
safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
The following symbols are used in this user manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
3General information and tips
2Environmental information
Contents
Operating Instructions 5
Safety instructions 5
Description of the Appliance 7
General Overview 7
Control Panel 7
Oven Features 8
Oven accessories 9
Before Using for the first time 10
Initial Cleaning 10
Using the Oven 11
Switching the Oven On and Off 11
Oven Functions 12
Inserting the Oven Shelf, Baking Tray and Roasting Pan 13
Inserting/Removing the Grease Filter 14
Additional functions 15
Countdown 16
Meat probe 17
Uses, Tables and Tips 19
Baking 19
Baking table 21
Table for Bakes and Gratins 27
Frozen Ready Meals Table 27
Roasting 28
Roasting table 28
Meat probe Table 30
Grill Sizes 31
Grilling table 31
Defrosting 32
Defrosting table 32
Drying 33
Making Preserves 34
3Contents
Contents4
Cleaning and Care 35
Outside of the appliance 35
Oven interior 35
Accessories 35
Fat Filter 35
Shelf Support Rails 36
Oven Lighting 37
Oven Ceiling 38
Oven door 39
Oven door glass 41
What to do if … 44
Disposal 45
Installation Instructions 46
Safety information for the installer 46
Guarantee/Customer Service 49
Service 51
Operating Instructions
1Safety instructions
Electrical safety
• This appliance must be only connected by a registered electrician.
• In the event of a fault or damage to the appliance: Take the fuses out or
switch off.
• Repairs to the appliance must only be carried out by qualified service engi-
neers. Considerable danger may result from improper repairs. If repairs be-
come necessary, please contact our Customer Services or your dealer.
Child Safety
• Never leave children unsupervised when the appliance is in use.
Safety whilst Using
• People (including children) who, because of their physical, sensory or mental
capabilities or their inexperience or ignorance are not able to use the device
safely, should not use this device without supervision or instruction by a responsible person.
• This appliance is intended to be used for cooking, roasting and baking food in
the home.
• Take care when connecting electric appliances to sockets nearby. Do not allow
connecting leads to come into contact with or to catch beneath the hot oven
door.
• Warning: Risk of burns! The interior of the oven becomes hot during use.
• Using ingredients containing alcohol in the oven may create an alcohol-air
mixture that is easily ignited. In this case, open the door carefully. Do not have
embers, sparks or naked flames in the vicinity when opening the door.
5Operating Instructions
3Information on acrylamides
According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures
and not browning foods too much.
Safety instructions6
How to avoid damage to the appliance
• Do not line the oven with aluminium foil and do not place baking trays, pots,
etc. on the oven floor, as the heat that builds up will damage the oven enamel.
• Fruit juices dripping from the baking tray will leave stains, which you will not
be able to remove. For very moist cakes, use a deep tray.
• Do not put any strain on the oven door when open.
• Never pour water directly into the oven when it is hot. This could cause dam-
age to or discoloration of the enamel.
• Rough handling, especially around the edges of the front panel, can cause the
glass to break.
• Do not store any flammable materials inside the oven. These could ignite
when the oven is switched on.
• Do not store any moist foods inside the oven. This could damage the oven
enamel.
• After switching off the cooling fan, do not keep uncovered dishes in the oven.
Moisture may condense in the oven interior or on the glass doors and may get
into the units.
3Note on enamel coating
Changes in the colour of the oven’s enamel coating as a result of use do not affect the appliance’s suitability for normal and correct use. They therefore do not
constitute a defect in the sense of the warranty law.
Description of the Appliance
General Overview
Control panel
7Description of the Appliance
Door
handle
Full glass door
Control Panel
Oven Power IndicatorTemperature Pilot Light
Temperature /
Time Display
Selection buttons
Oven Functions
Temperature selector
Description of the Appliance8
Oven Features
Top heat and heating elements
Shelf positions
Oven shelf runners,
removable
Inside of door
On the inside of the oven door you will find
the numbers of the different oven shelves.
You will also find some brief information
about the oven's functions, recommended
shelves and temperatures for cooking the
most popular dishes.
Oven lighting
Meat probe socket
Fat Filter
Fan heating element
Fan
Bottom Heat
Oven accessories
Oven shelf
For cookware, cake tins, roasts and grilled
foods.
Baking tray
For cakes and biscuits.
Roasting Pan
For baking and roasting or as a pan for collecting fat.
9Description of the Appliance
Meat probe
For determining exactly how far joints of
meat are cooked.
Before Using for the first time10
Before Using for the first time
Initial Cleaning
Before using the oven for the first time you should clean it thoroughly.
1Caution: Do not use any caustic, abrasive cleaners! The surface could be dam-
aged.
3To clean metal fronts use commercially available cleaning agents.
1. Turn the oven function switch to oven lighting.
2. Remove all accessories and the shelf support rails and wash them with warm
water and washing up liquid.
3. Then wash out the oven with warm water and washing-up liquid, and dry.
4. Wipe the front of the appliance with a damp cloth.
Using the Oven
11Using the Oven
3
The oven is equipped with retractable buttons for “Oven functions” and “Tem-
perature selection”. To use, press the relevant button. The button then sticks out.
Switching the Oven On and Off
Oven Power Indicator
Oven FunctionsTemperature selector
1. Turn the oven functions dial to the desired function.
2. Turn the temperature selector to the desired temperature.
The power indicator is lit as long as the oven is in operation.
The temperature pilot light is lit as long as the oven is heating up.
3. To turn the oven off, turn the oven functions dial and the temperature selector
to the Off position.
Temperature Pilot Light
3Cooling fan
The fan switches on automatically in order to keep the appliance’s surfaces cool.
When the oven is switched off, the fan continues to run to cool the appliance
down, then switches itself off automatically.
Using the Oven12
Oven Functions
The oven has the following functions:
Oven functionApplication
Light Using this function you can light up the oven interior, e.g. for
Convection with
ring heating
element
Pizza settingFor baking on one oven level dishes that require more inten-
ConventionalFor baking and roasting on one oven level.
Bottom heatFor baking cakes with crispy or crusty bases.
DefrostFor defrosting e. g. flans and gateaux, butter, bread, fruit or
Grill For grilling flat foodstuffs placed in the middle of the grill
Dual grill For grilling flat foodstuffs in large quantities and for toast-
RotithermFor roasting larger joints of meat or poultry on one level.
cleaning.
For baking on up to three oven levels at the same time.
Set the oven temperatures 20-40 °C lower than when using
Conventional.
sive browning and a crispy base.
Set the oven temperatures 20-40 °C lower than when using
Conventional.
other frozen foods.
and for toasting.
ing.
The function is also suitable for gratinating and browning.
Inserting the Oven Shelf, Baking Tray and Roasting Pan
3Shelf runner safety and anti-tip device
As a shelf runner safety device, all insertable components have a small curved
indentation at the bottom on the right and left-hand edge.
Always insert insertable components so that this indentation is at the back of
the oven interior. This indentation is also important for preventing the insertable
components from tipping.
Inserting the baking tray or roasting
pan
Push the baking tray or roasting pan between the guide bars of the selected oven
level.
Inserting the oven shelf:
Insert the oven shelf so that the feet point
downwards.
Push the oven shelf between the guide bars
of the selected oven level.
13Using the Oven
3The high rim around the oven shelf is an
additional device to prevent cookware from
slipping.
Inserting the oven shelf and roasting
pan together
Lay the oven shelf on the roasting pan.
Push the roasting pan between the guide
bars of the selected oven level.
Using the Oven14
Inserting/Removing the Grease Filter
Only use the grease filter when roasting
to protect the rear heating elements from
fat splashes.
Inserting the grease filter
Hold the grease filter by the grip
and insert the two mounts downwards into the opening on the rear
wall of the oven (fan opening).
Taking out the grease filter
Hold the grease filter by the grip
and unhook it.
Additional functions
15Using the Oven
Either Countdown or Meat probe
can be set.
Countdown
To set a countdown.
Meat probe
To set a core temperature.
3General Hints
• After a function has been selected, the display flashes for about 5 seconds.
While it flashes, the desired time can be set using the orbuttons.
• When the desired time has been set, the display flashes for another 5 seconds.
The set time begins to run.
• Press any of the buttons to stop the signal.
• The desired oven function and temperature can be selected before or after
setting the clock functions.
• When cooking is finished, turn the oven and temperature selectors back to ze-
ro.
Time or temperature display
Selector buttons
Using the Oven16
Countdown
3This function has no effect on the operation of the oven.
1. Press any button.
“0:00” flashes in the display.
2. Within 5 seconds, set the desired countdown using the or buttons
(max. 99 minutes).
After 5 seconds the display shows the time
remaining.
When the time has elapsed, “0.00” is displayed and an audible signal sounds for
2minutes.
3. The signal can be stopped by pressing any
button.
Meat probe
After a set core temperature is reached, an audible signal sounds.
3The oven is not switched off!
There are two temperatures to consider:
– The oven temperature: see Roasting Table
– Core temperature: see Meat probe Table
1Important: Only the meat probe supplied may be used. If replacing, only use
genuine spare parts.
1. Push the tip of the meat probe right into
the meat so that the tip is in the centre of
the meat.
2. Insert the meat probe plug into the socket
on the side wall of the oven as far as it will
go
3. Select desired oven function and temperature.
The suggested temperature appears in the
display.
3The core temperature is displayed once it
reaches 30°C and thereafter.
17Using the Oven
4. Using the or button, set the desired
core temperature.
Using the Oven18
After approx. 5 seconds, the current core
temperature is shown in the display.
As soon as the actual core temperature has
reached the set temperature, an audible
signal sounds.
Press any button to switch off the signal.
1Warning: The meat probe is hot! There is a
risk of being burned when removing the
plug and the tip of the meat probe.
3The oven is not switched off!
5. Remove the meat probe’s plug from the
socket and take the meat with the meat
probe still inserted out of the oven.
6. Switch off oven functions and temperature.
Checking or changing the meat core
temperature:
– If you press the or buttons once,
the set core temperature is displayed.
– By pressing or several times, it is
possible to change the selected temperature subsequently.
Uses, Tables and Tips
Baking
Oven function: Convection with ring heating element or
Conventional
Baking tins
• For Conventional dark metal and non-stick tins are suitable.
• For Convection with ring heating element bright metal tins are also suita-
ble.
Oven levels
• Baking with Conventional is possible on one oven level.
• With Convection with ring heating element you can bake on up to 3 baking
trays at the same time:
1 baking tray:
e.g. oven level 3
19Uses, Tables and Tips
1 cake tin:
e.g. oven level 1
2 baking trays:
z. g., oven levels 1 and 3
3 baking trays:
oven levels 1, 3 and 5
Uses, Tables and Tips20
General Instructions
• Insert the tray with the bevel at the front.
• With Conventional or Convection with ring heating element you can
also bake with two tins next to one another on the oven shelf at the same
time. This does not significantly increase baking time.
3When frozen foods are used the trays inserted may distort during cooking. This
is due to the large difference in temperature between the freezing temperature
and the temperature in the oven. Once the trays have cooled the distortion will
disappear again.
How to use the Baking Tables
The tables give the required temperature settings, baking times and oven shelf
levels for a selection of typical dishes.
• Temperatures and baking times are for guidance only, as these will depend on
the consistency of pastry, dough or mixture, the amount and the type of baking tin.
• We recommend using the lower temperature the first time and then if neces-
sary, for example, if a deeper browning is required, or baking time is too long,
selecting a higher temperature.
• If you cannot find the settings for a particular recipe, look for the one that is
most similar.
• If baking cakes on baking trays or in tins on more than one level, baking time
may be extended by 10-15 minutes.
• Moist recipes (for example, pizzas, fruit flans, etc.) are baked on one level.
• Cakes and pastries at different heights may brown at an uneven rate at first. If
this occurs, please do not change the temperature setting. Different rates
of browning even out as baking progresses.
• Your new oven may bake or roast differently to your previous appliance. So
adapt your normal settings (temperature, cooking times) and oven shelf levels
to the recommendations in the following tables.
2With longer baking times, the oven can be switched off about 10 minutes before
the end of baking time, to make use of the residual heat.
Unless otherwise stated, the values given in the tables assume that cooking is
started with the oven cold.
Baking table
Baking on one oven level
21Uses, Tables and Tips
Type of
baking
Oven function
Oven
level
Temperature
°C
Time
Hr: Mins.
Baking in tins
Ring cake or briocheConvection with
1150-1600:50-1:10
ring heating
element
Madeira cake/fruit cakesConvection with
1140-1601:10-1:30
ring heating
element
Sponge cakeConvection with
11400:25-0:40
ring heating
element
Sponge cakeConventional11600:25-0:40
Flan base - short pastry Convection with
3170-180
1)
0:10-0:25
ring heating
element
Flan base - sponge mixtureConvection with
3150-1700:20-0:25
ring heating
element
Apple pieConventional1170-1900:50-1:00
Apple pie (2tins Ø20cm,
diagonally off set)
Convection with
ring heating
11601:10-1:30
element
Apple pie (2tins Ø20cm,
Conventional11801:10-1:30
diagonally off set)
Savoury flan (e. g, quiche
lorraine)
Convection with
ring heating
1160-1800:30-1:10
element
CheesecakeConventional1170-1901:00-1:30
Cakes/pastries/breads on baking trays
Plaited bread/bread crownConventional3170-1900:30-0:40
• For preserving, use only commercially available preserve jars of the same size.
• Jars with twist-off or bayonet type lids and metal tins are not suitable.
• When making preserves, the first shelf position from the bottom is the one
most used.
• Use the shelf for making preserves. There is enough room on this for up to six
1-litre preserving jars.
• The jars should all be filled to the same level and clamped shut.
• Place the jars on the baking tray in such a way that they are not touching
each other.
• Pour approx. 1/2 litre of water into the baking tray so that sufficient moisture
is produced in the oven.
• As soon as the liquid starts to pearl in the first jars (after about 35-60 minutes
with 1 litre jars), switch the oven off or reduce the temperature to 100°C (see
table).
Preserves table
The times and temperatures for making preserves are for guidance only.
Preserve
Soft fruit
Strawberries, blueberries, rasp-
berries, ripe gooseberries
Unripe gooseberries160-17035-4510-15
Stone fruit
Pears, quinces, plums160-17035-4510-15
Vegetables
Warning: First switch off the appliance and let it cool down before carrying out
any cleaning.
Warning: For safety reasons, do not clean the appliance with steam blasters or
high-pressure cleaners.
Attention: Do not use any corrosive cleaning fluids, sharp objects or stain
removers.
Do not clean the glass oven door with abrasive fluids or metal scrapers, which
could scratch the surface. The glass could crack and shatter.
Outside of the appliance
• Wipe the front of the appliance with a soft cloth and a solution of hot water
and washing up liquid.
• For metal fronts, use normal commercially available cleaning agents.
• Please do not use scouring agents and abrasive sponges.
Oven interior
Clean the appliance after each use. In this way, dirt is easier to clean off and is
not allowed to burn on.
1. For cleaning, turn the oven light on.
2. After every use, wipe the oven with a solution of washing-up liquid and allow to
dry.
3Clean stubborn dirt with a special oven cleaner.
1Important: If using an oven spray, please follow the manufacturer's instructions
exactly.
Accessories
Wash all slide-in units (shelf unit, baking tray, shelf support rails etc.) after each
use and dry well. Soak briefly to make them easier to clean.
Fat Filter
1. Clean the fat filter in hot water and washing up liquid or in the dishwasher.
2. Badly burned on soiling can be removed by boiling the filter in a little water to
which 2-3 tablespoonsful of dishwasher cleaner has been added.
Cleaning and Care36
Shelf Support Rails
The shelf support rails on the left and right hand sides of the oven can be removed for cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the
oven wall (1) and then unhitch at the back
(2).
Fitting the shelf support rails
3Important! The rounded ends of the guide
rails must be pointing forwards!
To re-insert, first hook the rail into place at
the back (1) and then insert the front and
press into place (2).
37Cleaning and Care
Oven Lighting
1Warning: There is a danger of electric shock! Prior to changing the oven light
bulb:
– Switch off the oven!
– Remove the fuses in the fuse box or switch off the circuit breaker.
3Place a cloth on the oven floor to protect the oven light and glass cover.
Replacing the oven light bulb/cleaning
the glass cover
1. Remove the glass cover by turning it anti-
clockwise and then clean it.
2. If necessary:
Replace bulb with a 40 watt, 230 V,
300 °C heat-resistant oven light bulb.
3. Refit the glass cover.
Cleaning and Care38
Oven Ceiling
The upper heating element can be folded down to make it easier to clean the
oven ceiling.
Folding down the heating element
1Warning: Only fold down the heating ele-
ment when the oven is switched off and
there is no risk of being burnt!
1. Remove the side shelf support rails.
2. Grip the heating element at the front and
pull it forwards and out over the support
lug on the inner wall of the oven.
3. The heating element will now fold down.
1Caution: Do not use force to press the
heating element down! The heating element might break.
Cleaning the oven ceiling
Repositioning the heating element
1. Move the heating element back up towards
the oven ceiling.
2. Pull the heating element forwards against
the spring pressure and guide it over the
oven support lug.
3. Settle it onto the support.
4. Insert shelf support rail.
1Important: The heating element must be
positioned correctly and securely on both
sides above the support lug on the inner
wall of the oven.
Oven door
For easier cleaning of the oven interior the oven door of your appliance can be
taken off its hinges.
Removing the oven door from its hinges
1. Open the oven door as far as it will go.
2. Undo the clamping levers (A) on both door hinges fully.
3. Close the oven door as far as the first posi-
tion (approx. 45°).
39Cleaning and Care
4. Take hold of the oven door with a hand on
each side and pull it away from the oven at
an upwards angle (Take care: It is heavy).
3Lay the oven door with the outer side fac-
ing downwards on something soft and level, for example, a blanket in order to
prevent scratches.
Cleaning and Care40
Hanging the oven door back on its hinges
1. From the handle side take hold of the oven
door with a hand on each side and hold at
an angle of approx. 45°.
Position the recesses on the bottom of the
oven door on the hinges on the oven.
Let the door slide down as far as it will go.
2. Open the oven door as far as it will go.
3. Fold up the clamping levers (A) on both
door hinges back into their original
positions.
4. Close the oven door.
41Cleaning and Care
Oven door glass
The oven door is fitted with three panels of glass mounted one behind the other.The inner panels can be removed for cleaning.
1Important! Rough handling, especially around the edges of the front panel, can
cause the glass to break.
Removing the door glass panels
1. Open the oven door as far as it will go.
2. Undo the clamping levers (A) on both
door hinges fully
3. Close the oven door as far as the first posi-
tion (approx. 45°).
4. Take hold of the door trim(B) on the upper
edge of the door at both sides and press inwards to release the clip seal. Then remove
the door trim by pulling it upwards.
Cleaning and Care42
5. Take hold of the door glass panels on their
upper edge one after the other and take
them out of the guide by pulling them upwards..
Cleaning the door glass panels
Clean the door glass panels thoroughly with a solution of water and washing up
liquid. Then dry them carefully
Putting the door glass panels back.
1. From above insert the door glass panels at
an angle into the door profile at the bottom edge of the door one after the other
and lower them.
3Insert the smaller panel first, then the larg-
er panel.
2. Take hold of the door trim (B) at each side,
position it on the inside edge of the door
and plug the door trim (B) into the upper
edge of the door
3On the open side of the door trim (B) there
is a guide bar (C). This must be pushedThis
must be pushed between the outer door
panel and the guide corner (D).
The clip seal (E) must be snapped in.
3. Open the oven door as far as it will go
43Cleaning and Care
4. Fold up theclamping levers (A) on both door
hinges back into their original positions
5. Close the oven door.
What to do if …44
What to do if …
Problem Possible cause Remedy
The oven does not heatThe oven has not been
switched on
The required settings have not
been made
The domestic electrical protec-
tion device (fuse) has been
tripped
“F2” appears in the displayThe meat probe plug is not fit-
ted properly into the socket
The oven light does not come onThe bulb has blownReplace the bulb
Switch the oven on
Check the settings
Check the fuses or protection
devices.
If these are tripped repeatedly,
you should call a qualified
electrician.
Insert the meat probe plug as
far as it will go into the socket
on the side wall of the oven.
If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the Customer Care Department.
1Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
3If the appliance has been wrongly operated, the visit from the customer service
technician or dealer may not take place free of charge, even during the warranty
period.
3Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the oven door
during (or just after) baking or roasting may cause the glass to steam up.
Disposal
45Disposal
2
Packaging material
The packaging materials are environmentally friendly and can be recycled. The
plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community
waste disposal facilities.
2Old appliance
The symbol W on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you
purchased the product.
1Warning: So that the old appliance can no longer cause any danger, make it
unusable before disposing of it.
To do this, disconnect the appliance from the mains supply and remove
the mains cable from the appliance.
Installation Instructions46
Installation Instructions
1
Attention: The new appliance may only be installed and connected by a registered expert.
Please comply with this. If you do not, any damage resulting is not covered by
the warranty.
1Safety information for the installer
• The electrical installation is to be set up so that the appliance can be isolated
from the mains with a minimum 3mm all-pole contact separation.
Suitable separation devices include e.g. cut-outs, fuses (screw fuses are to be
taken out of the holder), RCD’s and contactors.
• Anti-shock protection must be provided by the installation.
• The built-in unit must meet the stability requirements of DIN 68930.
• Built-in ovens and built-in cooking surfaces are fitted with special connection
systems. For safety reasons, they must only be combined with appliances from
the same manufacturer.
47Installation Instructions
Installation Instructions48
Guarantee/Customer Service
European Guarantee
This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for
the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications:
•
The appliance guarantee starts from the date you first purchased the appliance which will be evidenced
by production of a valid purchase document issued by the seller of the appliance.
•
The appliance guarantee is for the same period and to the same extent for labour and parts as exists in
your new country of residence for this particular model or range of appliances.
•
The appliance guarantee is personal to the original purchaser of the appliance and cannot be transferred
to another user.
•
The appliance is installed and used in accordance with instructions issued by Electrolux and is only used
within the home, i.e. is not used for commercial purposes.
•
The appliance is installed in accordance with all relevant regulations in force within your new country of
residence.
The provisions of this European Guarantee do not affect any of the rights granted to you by law.
Electrolux Service, S:t Göransgatan 143,
S-105 45 Stockholm
Tarlabaþý caddesi no : 35 Taksim
Istanbul
129090 Москва, Олимпийский проспект, 16,
БЦ „Олимпик“
04074 Ки¿в, вул.Автозаводська,
2a, БЦ „Алкон“
Service
In the event of technical faults, please first check whether you can remedy the
problem yourself with the help of the operating instructions (section “What to
do if…”).
If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
In order to be able to assist you quickly, we
require the following information:
– Model description
– Product number (PNC)
– Serial number (S No.)
(for numbers see rating plate)
– Type of fault
– Any error messages displayed by the ap-
pliance
So that you have the necessary reference numbers from your appliance at hand,
we recommend that you write them in here:
51Service
Model description:.....................................
PNC:.....................................
S No:.....................................
www.electrolux.com
822 929 892-M-060907-01Subject to change without notice
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.