AEG-Electrolux 96931KFE-N User Manual
96931KFE-N
User manual Ceramic glass hob
Contents
2
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we recommend
you to keep it in a safe plac e. An d p le as e pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
Contents
Operating Instructions 2
Safety instructions 2
Description of the appliance 4
Operating the appliance 6
Tips on cooking and frying 12
Cleaning and care 13
What to do if... 14
Disposal 15
Installation Instructions 15
Safety information 15
Service 17
Subject to change without notice
Operating Instructions
Safety instructions
WARNING!
Please comply with these instructions. If you do not, any damage resulting is not covered
by the warranty.
Correct use
• This appliance is not intended for use by children or other persons whose physical, sensory
or mental capabilities or lack of experience and knowledge prevents them from using
the appliance safely without supervision or instruction by a responsible person to ensure
that they can use the appliance safely.
• Do not leave the appliance unattended during operation.
• This appliance should be used only for normal domestic cooking and frying of food.
• The appliance must not be used as a work surface or as a storage surface
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusible objects
(e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
Safety instructions
3
• To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they have built in to suitable built-in units
and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches
or splits), the appliance must be switched off and disconnected from the electrical supply,
to prevent the possibility of an electric shock.
• Repairs to the appliance must only be carried out by trained registered service engineers.
Safety during use
• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
• There is the risk of burns from the appliance if used carelessly.
• Remove stickers and film from the glass ceramic.
• Cables from electrical appliances must not touch the hot surface of the appliance or hot
cookware.
• Switch the cooking zones off after each use.
• Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and
saucepan lids on the cooking surface, as they can get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or highpressure cleaning
equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the
glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass ceramic and should
be removed straightaway.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans
to boil dry.
• Do not use the cooking zones with empty cookware or without cookware.
Description of the appliance
4
Description of the appliance
Cooking surface layout
1 2 3
1 Single cooking zone 1800W
2 Triple ring zone 1050/1950/2700W
3 Multi-purpose zone 1400/2200W
4 Single cooking zone 1800W
5 Control panel
6 Single zone 1200W
Control panel layout
1 2 3 4 5 6 7
11
1 Child lock with a pilot light
2 Stop+Go with a pilot light
3 Automatic warm-up function
4 Cooking zone indicators Timer function
5 Timer display
6 Timer
7 Multi-purpose zone with pilot lights
8 Heat setting indicator
9 Heat setting selection
10 Triple ring zone with pilot lights
11 On/Off with indicator
180
145/210/270
145
170x265
180
46 5
10
89
Description of the appliance
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by
touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor
fields which activate a desired function. Do not cover other sensor fields.
If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance
switches itself off.
Sensor field Function
On / Off Switches appliance on and off
Child lock Locking control panel for children
Triple ring To switch outer rings on and off
Multi-purpose
zone
STOP+GO To switch the Keep Warm setting on/ off
Automatic warm-upTo switch the automatic warm-up function on and off
Timer Timer selection
Increase settings To increase Timer time
Reduce settings To reduce Timer time
To switch outer rings on and off
5
Control bar
The control bar is a special Touch Control field. The
control bar is touched where the desired heat setting is positioned. The heat setting is shown in the
display. Correct to the left or the right, if necessary. Do not release before the desired heat setting
is reached.
If the control bar is touched for longer than 6
seconds, a signal sounds and the appliance
switches itself off.
Displays
Display Description
The cooking zone is switched off
/
-
Keep Warm settings Keep Warm / STOP+GO function is switched on
Heat settings To set heat settings
Automatic Warm-up The Automatic Warm-up function is switched on
Fault Malfunction has occurred
Residual heat Cooking zone is still hot
A
Operating the appliance
6
Display Description
Child safety device Lock/Child safety device is set
Automatic Switch off Switch off is active
Residual heat indicator
The residual heat indicator lights up, as soon as one cooking zone is hot.
WARNING!
Risk of burns from residual heat! After you switch the appliance off, the cooking zones
need some time to cool down. Look at the residual heat indicator.
Use residual heat for melting and keeping food warm.
Operating the appliance
Switching the appliance on and off
Control panel Display Pilot light
Switch on
Switch off
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.
Touch for 1 second /
Touch for 1 second / none
lights up.
goes out.
Setting the heat setting
Control panel Display
To set the heat
setting
Switch off
Touch the desired heat setting, if necessary, correct
up or down
Touch
/ to
Switching the outside ring on and off
By switching the outside rings on or off, the effective heating surface can be matched to
the size of the cookware.
Before an outside ring can be switched on, the inside ring must be switched on
Triple cooking zone Sensor panel Pilot light
To switch on the central ring
To switch on the outside ring
To switch off the outside ring
To switch off the central ring
Touch for 1-2 seconds.
Touch for 1-2 seconds.
Touch for 1-2 seconds.
Touch for 1-2 seconds.
Second pilot light lights up
Third pilot light lights up
Third pilot light goes out
Second pilot light goes out
Loading...