Page 1
65320 K
Ceramic Glass Hob
User Instructions
Page 2
Dear customer,
Please read these operating instructions through carefully.
Above all, please observe the “Safety“ section on the first few pages.
Please retain these operating instructions for future reference. Pass
them on to any subsequent owners of the appliance.
The warning triangle and/or specific words (
1
Important!
your safety or the function of the appliance. It is imperative that this
information is observed.
1. This symbol guides you step by step through the operation of the appli-
ance.
2. ...
3. ...
Next to this symbol you will find additional information and practical
3
tips on using the appliance.
Tips and information about the economical and ecological use of the
2
machine are marked with the clover.
In the event of a malfunction, these operating instructions contain
information on how to rectify faults yourself, see the “What to do, if...“
section.
If you require further assistance please contact your local AEG Service
Force Centre, see the section “Service and Spare Parts“
) are used to highlight information that is important for
Warning!, Caution!
,
Printed on paper manufactured with environmentally sound processes.
He who thinks ecologically, acts accordingly ...
2
Page 3
CONTENTS
Contents
Operating Instructions
Safety
Disposal
The Key Features of Your Appliance
Appliance Description 65320 K
Control panel 65320 K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cooking zone safety switch
Resetting the safety switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Before Using for the First Time
Cleaning for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Operation of the Cooking Surface
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Mains “On/Off“ button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cooking zone selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
“Heat Setting/Residual Heat“ display . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Heat setting selection + and - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
“Lock“ button and indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
“Triple Ring Zone/Casserole Zone“ button/indicators . . . . . . . . . . . . . . 12
“Timer“ button and display field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Automatic pan sensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Automatic triple ring sensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TOUCH CONTROL sensor buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Switching on the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Switching off the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cooking with the automatic warm up function . . . . . . . . . . . . . . . . . . . 15
Cooking without the automatic warm up function . . . . . . . . . . . . . . . . 16
Locking/unlocking the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Timer function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Ending the timer function early . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Automatic pan and triple ring sensing . . . . . . . . . . . . . . . . . . . . . . . . . . 20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tables and Tips
Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Tips for cooking with and without the automatic warm up function . . . . 23
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3
Page 4
Contents
Cleaning and Care
Ceramic glass cooking surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Stubborn Soilage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
What to do if ...
Service and Spare Parts
Customer Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Guarantee Conditions
Installation Instructions
Technical Data
Regulations, Standards, Directives
Installing and Connecting Up
Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4
Page 5
OPERATING INSTRUCTIONS
1
Safety
The safety aspects of this appliance comply with the accepted technical
standards and the German Appliance Safety Law. However, we also
consider it our obligation as a manufacturer to make you aware of the
following safety information.
Electrical Safety
• The new appliance may only be installed and connected up by qualified personnel, according to the manufacturers instructions and to
the relevant country standards.
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
• Repairs to the appliance should only be carried out by approved service engineers. Improper repairs can cause injury or significant malfunction. If your appliance needs repairing, please contact your local
AEG Service Force Centre.
• If your appliance malfunctions, or fractures, cracks or splits appear:
– switch off all cooking zones,
– Disconnect the hob from the electricity supply.
Safety
Child Safety
The cooking zones will become hot when you cook. Therefore, always
keep small children away.
The hob is designed to be operated by adults. Do not allow children to
play near or with the hob.
Safety During Use
• This appliance may only be used for normal cooking and frying in the
home. It is not designed for commercial or industrial purposes.
• Do not use the hob to heat the room.
• Take care when plugging electrical appliances into mains sockets near
the hob. Connecting leads must not come into contact with the hot
surface.
• Overheated fats and oils catch fire quickly. You should supervise
cooking when preparing foods in fat or oil (e.g. chips).
• Switch the cooking zones off after use.
5
Page 6
Safety
Safety When Cleaning
• For safety reasons do not clean the appliance with a steam jet or high
pressure cleaner.
• Clean the hob in accordance with the maintenance and cleaning
instructions in this manual.
How to Avoid Damage to Your Appliance
• Do not use the hob as a work surface or for storage.
• Do not use the cooking zones with empty pans, or without pans.
• Ceramic glass is insensitive to temperature shock and very robust,
however it is not unbreakable. Hard and sharp objects, in particular,
can damage the cooking surface if they fall on it.
• Do not use cast iron pans or pans with damaged bases that are rough
or burred. Scratching may occur when the pans are slid.
• Do not place any pans on the hob frame. Scratching may occur or the
paint damaged.
• Ensure that liquids containing acids, e.g. vinegar, lemon or scale
remover do not come into contact with the hob frame, otherwise
matt spots will appear.
• If sugar or a dish containing sugar comes into contact with a hot
cooking zone and then melts, remove the soiling immediately whilst
still hot using a scraper. If it cools, damage to the surface may occur
on removal.
• Keep all items and materials that can melt away from the ceramic
glass surface, e.g. plastics, aluminium foil, or oven foils. If something
of this nature should melt onto the ceramic glass surface, it must also
be removed immediately using the scraper.
• If you wish to use special types of pan (e.g. a pressure cooker, simmering pan, wok, etc.), please observe the manufacturer's instructions.
• Avoid boiling pans dry. The bases could be irreparably damaged in the
process and the glass ceramic cooking surface also damaged.
6
Page 7
2
Disposal
Disposing of packaging material
All materials used can be recycled.
The plastics are marked as follows:
• >PE< for polyethylene, e.g. as used for the outer wrapping and the
bags inside.
• >PS< for polystyrene foam, e.g. as used for the packing pieces, completely free of CFCs.
The cardboard is made from 80% recycled paper.
Disposal of old appliances
All old appliances must be properly disposed of, with due regard to
safety and the environment.
Disposal
Warning!
1
Cut off the mains cable.
Information on disposal
2
• The appliance must not be disposed of in the household rubbish.
• You can obtain information about collection dates or public tips from
your local refuse department or council.
Before disposing of old appliances make them inoperable.
7
Page 8
The Key Features of Your Appliance
The Key Features of Your Appliance
•
Ceramic glass Cooking Surface
cooking surface made of glass ceramic and 4 fast heating cooking
zones. The particularly powerful radiant heater elements significantly
shorten the amount of time taken for the zones to heat up.
•
Sensor Buttons
sensor buttons.
•
Cleaning
the sensor buttons is their ease of cleaning. A wipe with a damp cloth
is often all that is required. (See Section:
•
Mains button
Off“ button enables the electricity supply to the appliance to be completely switched off at the touch of a button.
•
Displays
heat setting chosen, the functions that are activated and any heat
remaining in the cooking zone.
•
Lock Button
The control panel can be completely locked using this button. In this
way inadvertent changes to the settings are prevented.
•
Automatic Function
cally controlled automatic warm up function on all four cooking
zones. The built-in function switches automatically from the maximum heat setting to the lower heat setting selected for further cooking.
•
Safety Switch
cooking zones when no changes have been made to the settings for a
set period of time.
•
Keep Warm Setting
warm.
•
Residual Heat Indicator
ing zone is sufficiently hot to cause burns.
•
Multipurpose Cooking Zone
equipped with a multipurpose/casserole zone. Depending on the setting, it can be used as a round or oval cooking zone.
•
Triple Ring Cooking Zone
ple ring cooking zone. This enables you to save energy.
: digital displays and indicators provide information on the
: your appliance is operated using TOUCH CONTROL
: the advantage of the glass ceramic cooking surface and
: the appliance has a separate mains button. The “On/
: in addition the appliance is fitted with a lock button.
: your appliance is equipped with an electroni-
: a safety switch automatically switches off all the
: ! is the heat setting at which food can be kept
: an h illuminates in the display if the cook-
: the appliance has a VITRAMIC®
“
Cleaning and Care“)
: the VITRAMIC® cooking surface is
: in addition, the cooking surface has a tri-
8
Page 9
The Key Features of Your Appliance
•
: all four rings can be automatically switched off using the
Timer
integrated timer. When the end of the cooking time has been
reached, the cooking zone switches off.
9
Page 10
Appliance Description 65320 K
Appliance Description 65320 K
10
ng
i
k
o
o
Cooking zone dimensions:
rear left: 145 mm
rear right: 170/265 mm
front left: 120/170/210 mm
front right: 145 mm
on with
i
ect
l
ne Se
o
e Ring Zone/Casserole
Z
l
Trip
“
tor
ca
i
nd
I
Heat Setting Sel
ne“
o
Z
h
t
ction “+“ and “-“
e
wi
“
r
“Time
ispla
D
“
On/
y
ie
F
Off“
ck
ld
Lo
nd
a
Page 11
Control panel 65320 K
Appliance Description 65320 K
t
a
o
e
H
l
cat
i
a
du
Ind
esi
ne
R
g Zo
ing/
t
n
et
Ri
S
t
a
iple
e
Tr
H
asse
Cooking Zone Selectio
C
Mains “On/Off“ button
n
rs
r
Heat Setting/Resid
ri
T
e
n
o
Z
e
ol
ple Ring
i
d
In
Casserole
-
ca
tor
Hea
al H
u
t
n
at
e
tching
i
w
S
ne
o
Z
cti
e
el
S
ing
t
et
S
“-“
nd
a
“
+
“
n
o
mer
Ti
“
wit
“
h
nd
I
Lock
tor
tor
ca
ca
i
i
On/O
“
ff“
Button
nd
I
h
it
w
Mains
For switching on the appliance. The appliance is
–switched on when the button is touched for approx. one second,
–switched off when the button is touched again for one second.
When the appliance is switched on the “Heat Setting/Residual Heat“
displays illuminate.
Cooking zone selection
Buttons for choosing the cooking zone for which the settings are to be
changed. The decimal point is illuminated in the display field of the
cooking zone just selected.
“Heat Setting/Residual Heat“ display
The four display fields that are assigned to the four cooking zones display:
–j, after switching on and when automatically switched off by the
safety function,
–! to ), depending on the heat setting chosen,
–a when the warm up function is active,
–h in the case of residual heat,
–f in the case of a fault.
11
Page 12
Appliance Description 65320 K
Heat setting selection + and
For setting and adjusting the heat setting (! to )) for the selected
cooking zone, or when in timer mode, to set or change the required
cooking time.
–The heat setting or the cooking time is increased using the + button and the automatic warm up function activated.
–The heat setting or the cooking time is decreased using the - button.
“
Lock“ button and indicator
To lock the control panel against inadvertent changes to the setting,
touch the button for approx. two seconds. The lock is lifted by touching
the button again for two seconds.
The lock can also be used as a child safety measure.
The indicator illuminates when the control panel is locked.
“Triple Ring Zone/Casserole Zone“ button/indicators
For switching on and off the outer or middle cooking zone of the triple
ring cooking zone, and the casserole zone.
To switch on, the relevant cooking zone must be selected using the
cooking zone buttons.
The indicators illuminate if the outer or middle cooking zone of the triple ring zone, or the casserole zone is switched on.
-
o
k
12
“
Timer“ button and display field
For activating the timer function for the selected cooking zone.
The display field shows the cooking time set or remaining for the
selected cooking zone.
The timer can also be used as an “Egg Timer“. Set the required cooking
time. The timer counts the remaining time down back to zero. This
function is not assigned to any cooking zone and programming is not
possible in this mode of operation.
“Timer Active“ indicators
cooking zones for which the timer is active. Each of the four cooking
zones has its own indicator.
It is not possible to use the timer functions “Timer“ and “Egg Timer“
simultaneously.
: the four “Timer Active“ indicators show the
w
Page 13
Cooking zone safety switch
Automatic pan sensing
Pan and triple ring sensing is automatically activated when the cooking
zone is switched on.
If a cooking zone button is pressed, but there is not a suitable pan on
the cooking zone, or the pan is too small, f (Fault) appears in the display. This is also displayed in the case of overheating, faults in the electronics or for safety reasons.
Automatic triple ring sensing
The outer or middle ring is switched on, or is switched off, depending
on the size of the pan.
1 Cooking zone safety switch
If, after a set period of time, one of the rings is not switched off or the
heat setting not changed, the cooking zone switches off automatically.
, or h appears in the displays of all the rings that are switched on.
j
The rings are switched off at:
• Heat setting 1 - 2 after 6 hours
• Heat setting 3 - 4 after 5 hours
• Heat setting 5 after 4 hours
• Heat setting 6 - 9 after 1.5 hours
Resetting the safety switch
To reset the safety switch on
0
appliance off and on again at the main button. The cooking zones are
then ready for use again.
appears in the ring display when there is still heat remaining.
h
3
cooking zones switched on, switch the
all
13
Page 14
Before Using for the First Time
Before Using for the First Time
Cleaning for the first time
Wipe the ceramic glass cooking surface with a damp cloth to remove
any traces left from manufacturing.
1
Important:
be damaged.
Do not use any caustic, abrasive cleaners! The surface could
Operation of the Cooking Surface
TOUCH CONTROL sensor buttons
To operate the TOUCH CONTROL sensor buttons, place your finger flat
on the desired button until the corresponding indicator illuminates, or
extinguishes, or the desired function is performed.
For quicker adjustment leave your finger on the button until the
desired value is reached.
All entries are acknowledged by an acoustic signal.
Switching on the appliance
0
Switch on the appliance using the mains “On/Off“ button.
The “Heat Setting/Residual Heat“ display fields indicate j.
After the mains “On/Off“ button has been operated to switch on your
3
appliance, one of the cooking zones must be selected using the cooking
zone selection buttons within approx. 10 seconds. Otherwise the appliance switches off again for safety reasons.
14
Switching off the appliance
0
Operate the mains “On/Off“ button to completely switch off the appliance.
After the individual cooking zones or the entire cooking surface have/
3
has been switched off, the presence of residual heat is indicated by h
(as in “Hot“) in the “Heat Setting/Residual Heat“ display fields of the
respective cooking zones.
If all cooking zones are switched off, the appliance switches off automatically after a period of time.
Page 15
Operation of the Cooking Surface
Cooking with the automatic warm up function
He
t
rs
o
t
Hea
ca
i
nd
I
sidual
e
/Re
Zon
ng
i
tt
ing
e
R
S
e
l
at
p
i
Tr
Zo
ng
oki
Co
Casserole Zone
T
el
S
ne
S
t
Hea
ple Ring
ri
cti
e
n
i
tt
e
n
o
ndicator
I
g/Re
Casserole
-
sidual
Heat Se
Hea
Zone
t
n
ti
t
tching
i
w
S
ection “+“ and
l
g Se
i
th
ndica
I
ck wi
Lo
rs
o
t
t
-“
“
r“ w
me
Ti
“
All four rings on the cooking surface have nine heat settings and are
equipped with an automatic warm up function.
–!, lowest heat setting
–), highest heat setting
–a, automatic warm up function.
Using the + button select the heat setting that you require for cooking, once the pan is hot, the cooking zone operates for a set period of
time at full power (a = automatic warm up function) and then
switches back to the heat setting selected for further cooking.
The duration of the automatic warm up period is dependant on the setting chosen for further cooking once the pan is hot!
Select the desired cooking zone using the cooking zone buttons.
1.
0
The decimal point in the associated display field illuminates.
Press the + button for the required cooking setting ! to (.
2.
The cooking setting chosen is then displayed. After 5 seconds, a
appears again in display instead of the cooking setting.
The cooking setting is displayed again at the end of the automatic
warm up time.
r
o
cat
i
h Ind
Mains “On/Off“ Butt
n
o
15
Page 16
Operation of the Cooking Surface
If you select a higher setting when the automatic function is in opera-
3
tion, e.g. from § to %, the previous warm up time is taken into
account. If you select a lower setting, then the automatic warm up
function is brought to an immediate end. If you start cooking again on
a cooking zone that is still warm, the automatic warm up function uses
the residual heat. This saves time and energy.
Switching off a cooking zone
Select the desired cooking zone using the cooking zone buttons.
1.
0
Press the + and - buttons simultaneously to switch off.
2.
Cooking without the automatic warm up function
If you want to use the cooking zone without the automatic warm up
function, then select the desired heat setting with the - button.
Select a high setting for warming up. As soon as steam starts to form or
the oil is hot, turn back to the heat setting necessary for further cooking.
Switch on the appliance and select the desired cooking zone using the
1.
0
cooking zone selection buttons.
The decimal point in the associated display field illuminates.
Press the - button to set the required cooking setting ! to ).
2.
The “Heat Setting/Residual Heat“ display field for the corresponding
cooking zone indicates the current setting.
You can adjust the heat setting at any time using the + and - but-
3.
tons, as long as the cooking zone is selected.
16
Switching off a cooking zone
Select the desired cooking zone using the cooking zone buttons.
1.
0
Press the + and - buttons simultaneously to switch off.
2.
If you want to switch on again a cooking zone on which there is food
3
that is already hot, you should always choose the required heat setting
using the - button. In this way you will avoid the food being overcooked by the automatic warm up function.
Page 17
Operation of the Cooking Surface
Locking/unlocking the control panel
At any time during the cooking process, the control panel can be
locked, with the exception of the “On/Off“ button. By this means accidental changes to the settings can be prevented. This function is also
useful as a child safety measure.
Touch the o button until the indicator illuminates.
1.
0
To unlock, touch the lock button again until the indicator extinguishes.
2.
Child safety
pletely switched off by touching the mains button, when the cooking
surface is switched on again, the lock button is active. This means that
the lock button must be operated first, before the rings can be
switched on again.
! If lock button is active when the cooking surface is com-
17
Page 18
Operation of the Cooking Surface
Timer function
Setting/changing the cooking time
Select the desired cooking zone using the cooking zone selection but-
1.
0
tons and set the desired heat setting.
Press the “Timer“ button to activate the timer function for this cooking
2.
zone.
Using the + or - buttons, set or change the amount of time required
3.
until the cooking zone is to switch off automatically (e.g. 20 minutes).
The timer starts after a few seconds and indicates the amount of time
left.
The small “Timer Active“ indicator is also illuminated for the respective
cooking zone, e.g. the upper left indicator corresponds to the rear left
cooking zone.
At the end of the cooking time set, the cooking zone switches off automatically and an acoustic signal sounds.
Touch the TIMER button to switch off the signal and the indicator.
4.
For quicker adjustment, leave your finger on the + or - button until
3
the desired value is reached.
If the - button is operated first, the time setting starts at 99 minutes.
If the + button is operated, the time setting starts at 1 minute.
18
Use of the timer as an interval timer (egg timer)
Press the “Timer“ button to activate the timer function.
1.
0
Using the + or - buttons, set the required cooking time
2.
(e.g. 20 minutes).
The timer starts after a few seconds and indicates the amount of time
left.
When the time set is at an end, an acoustic signal sounds.
Touch the TIMER button to switch off the signal.
3.
Displaying the remaining cooking time
Select the desired cooking zone using the cooking zone buttons.
0
If the selected cooking zone is in timer mode, the remaining cooking
time appears in the “Cooking Time“ display field.
Page 19
Operation of the Cooking Surface
Ending the timer function early
Hea
t
r
to
Hea
l
ca
i
a
nd
I
idu
ne
Z
o
Co
ng
i
k
o
asser
C
Z
g/Res
n
i
ng
tt
e
Ri
S
e
t
ipl
Tr
s
ne S
o
Hea
Tripl
el
le Zone I
o
S
t
i
R
e
o
i
ect
ing/Resi
t
et
-
g
n
n
n
C
c
di
asse
H
ator
d
e
ua
ro
at
H
l
Zone
e
l
Setting
t
a
e
in
ch
it
w
S
ion “+“ and “
ct
Sele
“
g
tors
ca
i
nd
I
h
it
w
k w
“
c
Lo
mer
Ti
“
There are two ways of switching off the timer early:
Switching off the cooking zone and timer simultaneously
Select the desired cooking zone using the cooking zone buttons.
1.
0
If the selected
cooking zone is in timer mode
(TIMER indicator illumi-
nated), the remaining cooking time appears in the timer display field.
Touch the + and - buttons simultaneously:
2.
cooking zone and timer
switch off.
Switching off the timer - leaving the cooking zone active
Select the desired cooking zone using the cooking zone buttons.
1.
0
Touch the “Timer“ button again.
2.
Touch the + and - buttons simultaneously:
3.
–only the
timer
switches off.
–the cooking zone is left on.
ndica
I
th
i
Mains “On
r
o
t
Off“ Butto
/
n
19
Page 20
Operation of the Cooking Surface
Automatic pan and triple ring sensing
Pan and triple ring sensing is automatically activated when the cooking
zone is switched on. Electronic sensors are fitted under the cooking
zones. These detect:
–the material that the pan is made of,
–the size of the base of the pan.
If you select a cooking zone on which there is not a pan, or the pan is
unsuitable,
display.
If there is a suitable pan on the selected cooking zone, the second +
third rings on the triple ring zone or casserole zone switch on automatically if required (depending on the size of the pan).
Suitable pans for pan and triple ring sensing:
3
3
–All
metallic
–All pans with
than the cooking zone marked. (Pay particular attention to the diameter of the
diameter of the rim).
Pans not suitable for pan and triple ring sensing:
–glass, clay and ceramic items,
–pans with uneven bases,
–pans with a base less than 12 cm in diameter.
If you would nevertheless like to use the above mentioned pans, you
can disable automatic pan and triple ring sensing:
appears in the respective “Heat Setting/Residual Heat“
f
pans with flat bases,
a base diameter
when buying pans, most manufacturers give the
base
that is no more than 2 cm smaller
20
Switching off automatic pan and triple ring sensing:
Touch the desired cooking zone button
1.
0
Touch the “Triple Ring Zone/Casserole Zone“ button, leave your finger
2.
on the button and, within 10 seconds, touch the cooker zone selection
button for the desired cooking zone. An acoustic tone confirms the
entry.
Page 21
Operation of the Cooking Surface
Switching on and off the triple ring or casserole zone (when pan
and triple ring sensing is switched off):
Select the cooking zone using the appropriate cooking zone selection
1.
0
button and set the desired heat setting.
Press the “Triple Ring Zone/Casserole Zone button
2.
k
.
The middle ring is switched on. The indicator under the II symbol illuminates.
The outer ring is switched on by pressing the button again. The indicator under the III symbol illuminates.
To switch off the outer ring, press the “Triple Ring Zone/Casserole Zone“
3.
button, the outer ring is switched off. The middle ring is switched off
by pressing the button again.
After the cooking zone has been switched off, pan and triple ring sensing is automatically reactivated.
21
Page 22
Tables and Tips
Tables and Tips
Pans
The better the pan, the better the results.
• You can recognise good quality pans by the base of the pan.
• The base should be as thick and flat as possible. Rough bases (e.g. on
cast iron pans) will scratch the cooking surface when slid.
• Use
high sided pans for dishes with a lot of liquid, so that nothing
boils over
• Ensure that the pan is in the centre of the cooking zone and covers
the heated/marked area.
.
Important!
1
The base could be damaged and then scratch the cooking surface when
slid. Saucepans and frying pans with sharp edges and burrs will also
scratch.
Avoid letting enamel saucepans and frying pans boil dry.
Energy Saving Tips
You will save valuable energy if you observe the following tips:
2
• Whenever possible, use the automatic warm up function on your
cooking zones (see “Cooking and Frying Table“).
• Observe the special tips on saucepans and frying pans.
and
cooking zone
• Dirty cooking zones and pan bases damage the glass ceramic cooking
surface and increase electricity consumption.
• Switch the cooking zone off before cooking is finished to use the
residual heat.
• Cooking times are reduced by up to 50% when a pressure cooker is
used. Not only do you save energy, but more vitamins and minerals
are retained.
should be the same size.
The pan base
22
Page 23
You will waste energy if the....
Tables and Tips
Pan is too small Pan lid is not
fitted properly
Pan base is
uneven
Pan is too large
(glass ceramic)
Tips for cooking with and without the automatic warm
up function
The automatic warm up function is suitable for:
• dishes that start off cold, are heated up at a high setting and do not
need to be continually watched when cooking,
• dishes that are put in a hot frying pan.
The automatic warm up function is not suitable for:
• goulash and similar braised dishes that need continual turning until
browned correctly, liquid adding and then braising until cooked,
• dumplings, pasta dishes with large amounts of liquid,
• cooking with pressure cookers,
• very large quantities of soup/stew with more than 2 litres of liquid.
General notes:
• When cooking without the automatic warm up function, we recom-
3
mend the use of a high heat setting to warm up the food (using the
button) and then leaving the dish to finish cooking at an appro-
-
priate lower heat setting.
• You can use the ! heat setting for keeping food warm.
• Take note of the results when you initially use the appliance. You can
then decide which heat setting is the best for "your dishes" in the
“quantities you are accustomed to preparing" with "your pans". You
will then rapidly come to value the merits of the automatic function
and will feel at ease with you new cooking surface.
23
Page 24
Tables and Tips
Typical Heat Settings
The figures given in the following tables are for guidance only. Exactly
which heat setting needs to be used depends on the quality of the pans
and the type and quantity of the food.
Table: Cooking and Frying
Automatic
Switch
Setting
9
8 4.5
7 3.5
6 2.5
5 8.5
4 6.5
3 4.8
2 3.0
1 1.0
Warm Up
*
Time
(Min.)
Warming Up
Browning
Frying
Fast Frying
Gentle Frying
Boiling
Steaming
Softening
Keeping warm
Melting
Cooking
Process
Examples of Usage
Warm up large amounts of liquid,
boil pasta,
brown meat,
(brown goulash, pot-roast)
Steaks, pieces of loin,
potato fritters,
fried sausages,
pancakes
Schnitzel/cutlets,
liver, fish,
rissoles, fried eggs
Boiling
potatoes, vegetables
Steam and sauté small quantities of
vegetables,
cooking rice and
milk based dishes
Keep food warm,
melt butter,
dissolve gelatine,
melt chocolate
24
*) When cooking without the automatic warm up function, the warm up time can
be selected as required.
Page 25
Cleaning and Care
Ceramic glass cooking surface
It is important to clean the cooking surface after each use!
Cleaning and Care
Important!
1
scouring cleaners or pan cleaners that scratch.
0
Always clean the cooking surface after each use. Use a damp cloth and
1.
a little washing up liquid.
Then rub the cooking surface dry with a clean cloth. No residues of
cleaner must be left on the surface.
Clean the entire cooking surface thoroughly once a week. For cleaning
2.
use “Stahl-Fix“, or
Then rinse the entire cooking surface with plain water and rub it dry
3.
with a clean cloth.
Ensure that no remnants of cleaner are left on the surface! Otherwise
the cooking surface will be damaged!
Only use the recommended cleaners.
Never use aggressive cleaners such as, for example, coarse
“
Vitroclen
”
.
25
Page 26
Cleaning and Care
Stubborn Soilage
Residues from food that has boiled over
First soften these using a wet cloth and
then remove residues using a glass
scraper.
Caution!
1
scraper!
Then clean the cooking surface with the
recommended cleaners.
Sugar
Warning!
1
melted plastic immediately -
warm
otherwise damage may be caused to the
hob.
Then clean the cooking surface normally.
Damage from sugar or food containing
sugar can be avoided by polishing the
cooking surface with “Vitroclen“.
Take care when using a glass
Remove burnt on sugar or
(not hot) - using a glass scraper,
when still
26
Page 27
Spots
Scale, shiny pearl like spots, metallic iridescent coloured spots, and food remnants from pans that have formed
during cooking are best removed when
the cooking zones are
Use the cleaners and polishes recommended. If necessary, clean more than
once.
Acids
still warm
.
Cleaning and Care
Important!
1
or scale removers on the hob frame, they
will make the surface matt.
Grains of sand that have fallen on the
cooking surface can cause scratching
when pans are slid. Therefore make sure
that no grains of sand are left on the
cooking surface.
Abraded decor
Important!
1
pans with abrasive bases are used, then
the decor will take on an abraded
appearance and dark spots will appear
over time.
You can obtain suitable cleaners and polishes as well as glass scrapers
3
from AEG Service Force Centre.
Do not put vinegar, lemons
If aggressive cleaners or
27
Page 28
What to do if ...
What to do if ...
A fault may have been caused by a minor operating error, which you
can correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
Warning!
1
approved service engineers. Improper repairs can cause injury or malfunction. If your appliance needs repairing, please contact your local
AEG Service Force Centre.
Repairs to the appliance should only be carried out by
What to do if ...
.... the cooking zones do not work?
Check whether
0
–the mains fuse (fuse box) is intact. If the fuse blows several times,
please call an approved electrician.
–that the appliance is correctly connected and is switched on,
–indicators on the control panel illuminate,
–the corresponding cooking zone is switched on,
–the cooking zones are set to the desired heat setting for cooking
(see section: “Cooking“),
–the cooking zones have been switched off by the safety switch
(see section: “Safety Functions“).
.... the cooking zones cannot be switched on?
Check whether
0
–the control panel is locked (see section: “Locking/Unlocking
the Control Panel“).
–more than 10 seconds have elapsed between operating the On/Off
button and switching on the desired cooking zone, (see section:
“Switching on the Appliance“).
–the touch switches are partially covered by a damp cloth or liquid.
28
Page 29
.... the cooking zones do not heat up, even though the displays
are working?
Check whether
0
– demonstration mode has been activated accidentally.
To deactivate this mode, ensure that the appliance is switched off and
that the control panel is not locked.
Then proceed as follows:
Switch on main button.
1.
Within 10 seconds, press the following buttons simultaneously for a
2.
maximum of one second:
– Lock button
o
– Cooking zone selection button, front left
– Cooking zone selection button, rear left.
When the buttons are released, a peep tone sounds as confirmation.
Press the j button, a peep tone sounds as confirmation.
3.
Your cooking surface is now ready for use again.
.... the display suddenly changes to j or h for residual heat?
Check whether
0
–the On/Off button has been operated accidentally.
–the touch switches are partially covered by a damp cloth, liquid or
similar.
–there has been a power cut.
–the safety switch has been activated.
What to do if ...
.... after switching off the cooking zones, neither j nor h for
residual heat appears in the display?
Check whether
0
–the cooking zone was only used for a short period and is therefore
not hot enough.
If the cooking zone is hot, call AEG customer service.
.... a cooking zone cannot be switched off?
Check whether
0
–the touch switches are partially covered by a damp cloth or liquid.
–the lock is activated.
.... a cooking zone cannot be switched on?
Check whether
0
–the lock is activated.
29
Page 30
.... f is shown in the display?
Check whether
0
–a pan that is too small is on the cooking zone.
–the cooking zone has been overheated.
If a cooking zone button is pressed and the pan on the cooking zone is
too small, f (Fault) appears in the display. This symbol is also displayed
in the case of overheating, faults in the electronics or for safety reasons.
Important:
If you call an engineer to resolve a problem listed in these
notes, or to rectify an error caused by incorrect use or installation, a
charge will be made, even during the guarantee period.
30
Page 31
SERVICE AND SPARE PARTS
In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning
08705 929 929
Your call will be automatically routed to the Service Centre covering
your post code area.
Please ensure that you have read the section ’What to do if....’ as the
engineer will make a charge if the fault is not a mechanical or electrical
breakdown even the appliance is under warranty.
Please note that proof of purchase is required for in-guarantee service
calls.
Help us to help you
Please determine your type of enquiry before writing or telephoning.
When you contact us we need to know:
• Your name,
• Address and post code.
• Telephone number
• Clear and concise details of the
fault.
• Name and model of the
appliance*
• E number *
*This information can be found on the rating plate.
What to do if ...
Customer Care
For general enquiries concerning your AEG appliances, or for further
information on AEG products, please contact our Customer Care
Department.
Customer Services Department
AEG Domestic Appliances
55-77 High Street
Slough
Berkshire
SLI ID2
Tel.: 08705 350 350
31
Page 32
What to do if ...
GUARANTEE CONDITIONS
Guarantee Conditions
AEG offer the following guarantee to the first purchaser of this appliance.
The guarantee is valid for 12 months commencing when the appliance is handed over
1.
to the first retail purchaser, which must be verified by purchase invoice or similar documentation.
The guarantee does not cover commercial use.
The guarantee covers all parts or components which fail due to faulty workmanship or
2.
faulty materials. The guarantee does not cover appliances where defects or poor performance are due to misuse, accidental damage, neglect, faulty
installation,unauthorised modification or attempted repair, commercial use or failure
to observe requirements and recommendations set out in the instruction book.
This guarantee does not cover such parts as light bulbs, removable glassware or plastic.
Should guarantee repairs be necessary the purchaser must inform the nearest customer
3.
service office (manufacturer´s service or authorised agent). AEG reserves the right to
stipulate the place of the repair (i. e. the customer´s home, place of installation or AEG
workshop).
The guarantee or free replacement includes both labour and materials.
4.
Repairs carried out under guarantee do not extend the guarantee period for the appli-
5.
ance. Parts removed during guarantee repairs become the property of AEG.
The purchaser´s statutory rights are not affected by this guarantee.
6.
European Guarantee
If you should move to another country within Europe then your guarantee moves with
you to your new home subject to the following qualifications:
–The guarantee starts from the date you first purchased your product.
–The guarantee is for the same period and to the same extent for labour and parts as
exist in the new country of use for this brand or range of products.
–This guarantee relates to you and connot be transferred to another user.
–Your new home is within the European Community (EC) or European Free Trade
Area.
–The product is installed and used in accordance with our instructions and is only
used domestically, i. e. a normal household.
–The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care Centre, listed below, to
give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances.
32
France Senlis +33 (0) 44 62 29 29
Germany Nürnberg +49 (0) 911 323 2600
Italy Pordenone +39 (0) 1678 47053
Sweden Stockholm +46 (0) 8 738 7910
UK Slough +44 (0) 1753 219899
Page 33
INSTALLATION INSTRUCTIONS
Technical Data
Important!
1
according to the manufacturer’s instructions and to the relevant British
Standards.
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
This appliance must be installed by qualified personnel,
Technical Data
Appliance Dimensions
Width 570 mm
Depth 500 mm
Height 55 mm
Cut-Out Dimensions
Width 560 mm
Depth 490 mm
Corner radius R3
Power Consumption
Front left cooking zone 2300 W
Rear left cooking zone 1200 W
Rear right cooking zone 2400 W
Front right cooking zone 1200 W
Heater Element Voltage
Total Electrical Load Max.
Fuse Rating
230 V ...240 V
7.1 kW
30 Amp
33
Page 34
Regulations, Standards, Directives
Regulations, Standards, Directives
This appliance meets the following standards:
• EN 60 335-1 and EN 60 335-2-6
in respect of the safety of electrical appliances for household use and
similar purposes and
• DIN 44546 / 44547 / 44548
in respect of properties of electrical cookers for the household.
• EN 55014-2 / VDE 0875 part 14-2
• EN 55014 / VDE 0875 part 14/12.93
• EN 61000-3-2 / VDE 0838 part 2
• EN 61000-3-3 / VDE 0838 part 3
in respect of basic electromagnetic compatibility (EMC) requirements.
This appliance complies with the following EC directives:
• 73/23/EWG dated 19.02.1973 (Low Voltage Directive)
• 89/336/EWG dated 03.05.1989 (EMC Directive, including Amendment
Directive 92/31/EWG).
34
Page 35
Installing and Connecting Up
Installing
Installing and Connecting Up
Important:
1
by
an approved installer
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
The veneer or plastic coverings on kitchen units around the appliance
must be bonded with heat resistant adhesive (100 °C). If plastic coverings or the adhesive are not sufficiently temperature resistant, then the
covering may distort or come loose.
In respect of fire protection, the appliance corresponds to
(EN 60335-2-6). Only this type of appliance may built into positions
with a high cupboard or wall on one side.
The new appliance is only to be installed and connected up
.
type Y
The cooking surface must have a heat protective base permanently
fixed in position. The distance from the base to the underside of the
cooking surface must be at least 50 mm. The edges of the cut out must
be coated with a water-proof material. The cooking surface must be
built-in such that the TOUCH CONTROL control panel is at the front
(see Fig.).
35
Page 36
Installing and Connecting Up
The separation between the hob and the extractor hood must be at
least as large as that given in the extractor hood installation instructions.
36
Page 37
Installing and Connecting Up
min.
25 mm
min.
5 mm
• On tiled work surfaces, the joints in the area where the hob sits must
be completely filled with grout.
• On natural stone, synthetic stone, or ceramic surfaces, the snap-
action springs can be bonded in place.
• Ensure that the seal is correctly seated in the frame and that it is
seated against the work surface without leaving any gaps. Please do
not apply additional silicon sealant, this will make removal more difficult in the event of the need for service.
37
Page 38
Installing and Connecting Up
Electrical connection
Assembly and connection of the new appliance may only be performed
by an
approved installer
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
.
Attention!
1
used for connecting up the appliance. Replacement cables can only be
obtained from AEG Service Force Centres. Part No. 374 349 000.
A device is to be included in the electrical installation that makes it
possible to isolate the appliance from the mains supply with a minimum contact separation of 3 mm. Suitable isolation devices include,
e.g. cut-outs, fuses (screw type fuses are to be removed from the
holder), earth leakage trips and contactors.
Important!
1
ing diagram.
Only the cable fitted to the cooking surface recess may be
Make the electrical connection in accordance with the wir-
38
Page 39
Installing and Connecting Up
39
Page 40
Hier Typschild aufkleben!
(nur für Werk)
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nuremburg
http://www.aeg.hausgeraete.de
© Copyright by AEG
ANC 822 947 296 -03- 0899
Loading...