AEG-Electrolux 6531DGM User Manual

INSTRUCTION- AND
INSTALLATION BOOK

Gas hob

GB

6531 DG-m GB 949600278

1

Your New Appliance

Thank you for purchasing an AEG appliance.

To enable you to use your new appliance efficiently and safely, please read
this instruction book carefully before installing or using the appliance, and
retain for future reference. Should the appliance be transferred to a new
owner please ensure this instruction book is left with the appliance in order
that the new owner can get to know the functions of the appliance and the
relevant warnings.

If you require further assistance or advice, please contact our Customer Care
Department either by letter or telephone:

Customer Care Department
AEG Domestic Appliances
55-77 High Street
Slough
SL1 1DZ

Tel: [phone]*

* calls to this number may be recorded for training purposes

2

Table of contents

Contents Page no

For the user

Your new appliance ...................................................................................... 2

Safety information ........................................................................................ 4

Description of the product ......................................................................... 5

Operation instrutions .................................................................................. 6

Burner ring/cover ................................................................................. 7

Ignition electrode (A) ........................................................................... 7

Thermo Sensor (B) ............................................................................... 7

Ignition .................................................................................................. 8

Maintenance and cleaning .......................................................................... 9

Splashguard .......................................................................................... 9

Stainless steel surfaces ....................................................................... 10

The ceramic glass plate ...................................................................... 10

The gas burner.................................................................................... 11

Something not working ............................................................................. 18

Service and spare parts ............................................................................ 19

Guarantee conditions ................................................................................ 20

For the installer

Technical data ............................................................................................. 12

Important safety requirements ................................................................ 13

Mounting .................................................................................................. 15

How to read the operating instructions:

1... 2...Step by step

Safety information

3

Hint and tips

Environmental information

Safety information

These warnings are provided in the
interests of your safety. Ensure you
fully understand them before installing
or using the appliance. Your safety is of
paramount importance. If you are
unsure about the meaning of these
warnings contact the Customer Care
Department for assistance.

Installing

Do not install the hob if the ceramic
glass is damaged or cracked.

This hob must be installed according to
the instructions supplied. Any
installation work must be undertaken
by a qualified competent person.

Do not alter the specifications or
attempt to modify the appliance in any
way.

During Use

The hob is intended for domestic
cooking only. It is not designed for
commercial/industrial purposes.

Ensure that all the control knobs are in
the OFF position when not in use.

Do not use the hob if it is damaged in
any way, contact your local AEG
Service Centre.

Never use plastic or aluminium dishes
on the hob.

Never leave the hob unattended while
deep fat frying, or heating fats and oils.

The appliance is not intended for use
by young children or infirm persons
without supervision.

Child Safety

Young children should be supervised
to ensure that they do not play
with the appliance

The hob gets hot when it is in use.
Children should be kept away until the
hob has cooled.

Maintenance and Cleaning

Only clean this hob in accordance
with the instructions given in this
book.

Service

Repairs carried out by inexperienced
persons may cause injury or serious
malfunction of the appliance. Repairs
must only be carried out by a
qualified/competent person. Contact
your local AEG Service Centre.

Disposal

Make the hob unusable by cutting off
the cable.

Dispose of any packaging material and
old appliances at an authorised
disposal site.

4

Description of the product

Burner

Control knob

5

Operations

Burner markings

Symbols at each control knob indicates
which burner is adjusted with the
control knob.

Front Burner

Back burner

Panel markings

Each control knob has a ring showing
the scale of markings.

Off.

Maximum flame

Minimum flame

6

Burner ring/cover

Together with the burner ring the burner
ring/cover forms a space where the final
mixture of gas and air takes place in
order to make the gas burn correctly.

Please note: It is consequently very
important that the individual burner
cover/ring is placed correctly on the
burner.

If the burner ring/cover are wrongly
placed the burner will operate
incorrectly, and the burners may be
damaged within at short space of time.

Ignition electrode (A)

Each burner has been provided with an
ignition electrode. As long as the
operating knob is depressed, the
automatic ignition will ensure that a
spark is emitted between the ignition
electrode and the burner cover.

Thermo Sensor (B)

The hob unit features fully-secured gas
taps (thermo-fuse)
In case the flame goes out, the thermo
sensor automatically prevents gas
admission after a shorter time (max. 90
seconds).
Note: Gas admission is always allowed
while the operation button is pressed ­See start-up procedure.

Burner Main nozzle

Burnercover

7

Ignition

1. Depress and turn the control knob
for the burner to the left to max.
flame . (Ignition position)

2. The ignition electrode will emit
sparks, and when the mixture of gas
and air is correct, the burner will be
ignited. If it is not possible to
connect the unit to mains, a
match may be used to ignite the
burner.

3. After starting the burner, press the
control knob for approx. 10
seconds to activate the automatic
thermo-couple (thermo sensor
ready).

5. The burner can now be regulated
between maximum and minimum

8