Please read these user instructions carefully and keep them to refer to
later.
Please pass the user instructions on to any future owner of the appliance.
The following symbols are used in the text:
1 Safety instructions
Warning! Notes that concern your personal safety.
Important! Notes that show how to avoid damage to the appliance.
Please comply with these instructions. If you do not, any damage re-
3
sulting is not covered by the warranty.
5 This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and
frying of food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
Child safety
• Small children must be kept away from the appliance.
• Only let older children work on the appliance under supervision.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off
and disconnected from the electrical supply.
• Repairs to the appliance must only be carried out by trained registered service engineers.
4
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not touch the hot surface of
the appliance or hot cookware.
• Overheated fat and oil can ignite quickly. When cooking with fat or
oil (e.g. frying chips) do not leave the appliance unattended.
• Switch the cooking zones off after each use.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or
high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The ceramic glass can be damaged by objects falling onto it.
• The edge of the ceramic glass can be damaged by being knocked by
the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the ceramic glass if pushed across the surface.
• Objects that melt and things that boil over can burn onto the ceramic
glass and should be removed straightaway.
• Do not use the cooking zones with empty cookware or without cookware.
5
Description of the Appliance
Singl
Singl
Cooking surface layout
e ring cooking zone
1200W
e ring cooking zone
1800W
Double ring cooking zone
750/2200W
Control panel layout
Pilot light
Dual zone
6
Control panelSingle ring cooking zone
Cooking zones and heat setting selection
Second ring
On/Off
1200W
Display
On/Off
Touch Control sensor fields
The appliance is operated using the Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays.
Touch the sensor fields from above, without covering other sensor
fields.
Sensor fieldFunction
On / OffSwitches appliance on and off
Increase settingsSelect cooking zone
Increases heat setting
Reduce settingsReduces heat setting
Dual zone touch control Switches outside zone
on and off
Displays
Display Description
¾Cooking zone is switched off
¿ - ÇHeat settingsHeat setting is set
ERFaultMalfunction has occurred
hResidual heatCooking zone is still hot
lChild safety deviceLock/child safety device is set.
Residual heat indicator
1 Warning! Risk of burns from residual heat. After being switched off,
the cooking zones need some time to cool down. Look at the residual
heat indicator
h.
3Residual heat can be used for melting and keeping food warm.
7
Operating the appliance
Switching the appliance on and off
Control panel Display
Switch onTouch for 2 seconds.¾ / Decimal point flashes
Switch offTouch for 1 secondh / none
Selecting the cooking zone
Control panel Display
SelectTouch ¾ Decimal point illumi-
nates
3The decimal point is displayed by the selected cooking zone. Then a
heat setting must be set for this cooking zone within 6 seconds, otherwise it must be re-selected.
Selecting the heat setting
3After selecting the cooking zone, briefly release the sensor field .
Control panelDisplay
IncreaseTouch ¾ to Ç
DecreaseTouch Ç to ¾
Switch offTouch and at the same time¾
3After 6 seconds with no input the selection is cancelled and the deci-
mal point goes out. To set the required cooking zone again, make another selection.
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.