Q: What do I do if the oven is not heating?
A: Check whether you have set all the working parameters, and that, for convenience, the door does close, and that, if the fuse in the home circuit does not blow. Otherwise, Please call in an accredited electrical technician.
Q: What’s the process of replacing an oven light?
A: Begin by switching the oven off and disconnecting the power; you need to unscrew the glass cover, which is going to need you to switch it in an anti-clockwise direction, subsequently, remove the bulb and replace it with a 40 watt heat resistant bulb. End the process by screwing back the glass cover by twisting in the clockwise direction.
Q: Am I required to pre-heat the oven?
A: In most cases, you could skip the step of pre-heating the oven, but the need for it will be specified in the instructions of the recipe.
Q: Is oven usage of aluminum foil allowed?
A: No lining up the oven with aluminum foil is discouraged as the oven can damage the enamel due to heat gathering.
Q: What’s the optimal way of cleaning catalytic panels?
A: The functional working of the catalytic panels keep them clean, however, if they are heavily soiled, then to clean them set the oven to 250 degrees for more than an hour. Just ensure that you don’t scrub abrasive cleansers while hand cleaning.
Q: What am I supposed to do if the oven lamp goes out?
A: In accordance with the cleaning and maintenance procedures which have been prescribed in the user manual, replace the oven lamp.
Q: What’s the recommendation for materials acceptable for use in a baking tray?
A: It is suggested to use dark metal tins and coated tins for using top or bottom heat while lighter coated tins can be used in hot air.